Age | Commit message (Collapse) | Author | Files | Lines |
|
These functions only read from memory, so mark the pointer as const.
|
|
These functions only read from memory, so mark the pointer as const.
|
|
These functions only read from memory, so mark the pointer as const.
|
|
When reading/writing arbitrary data to the system's memory, the unsigned
char pointer type doesn't make that much sense. Switch it to void so we
align a bit with standard C library read/write functions, and to avoid
having to sprinkle casts everywhere.
|
|
Silence GCC 12 warning on tc-i386.c:
gas/config/tc-i386.c: In function ‘md_assemble’:
gas/config/tc-i386.c:5039:16: error: too many arguments for format [-Werror=format-extra-args]
5039 | as_warn (_("only support RIP-relative address"), i.tm.name);
* config/tc-i386.c (md_assemble): Print mnemonic in RIP-relative
warning.
* estsuite/gas/i386/x86-64-prefetchi-warn.l: Updated.
|
|
This changes gdbarch to use an enum for call_dummy_location, providing
a little more type safety.
|
|
This changes gdbarch to use the "predefault" to initialize its members
inline. This required changing a couple of the Value instantiations
to avoid a use of "gdbarch" during initialization, but on the whole I
think this is better -- it removes a hidden ordering dependency.
|
|
PR c++/29243 points out that "info func" on a certain C++ executable
will cause an infinite loop in gdb.
I tracked this down to a bug introduced by commit 6b5a7bc76 ("Handle
member pointers directly in generic_value_print"). Before this
commit, the C++ code to print a member pointer would wind up calling
value_print_scalar_formatted; but afterward it simply calls
generic_value_print and gets into a loop.
This patch restores the previous behavior and adds a regression test.
|
|
translations for the ld and opcodes sub-directories.
|
|
gas/ChangeLog:
* NEWS: Add support for Intel PREFETCHI instruction.
* config/tc-i386.c (load_insn_p): Use prefetch* to fold all prefetches.
(md_assemble): Add warning for illegal input of PREFETCHI.
* doc/c-i386.texi: Document .prefetchi.
* testsuite/gas/i386/i386.exp: Run PREFETCHI tests.
* testsuite/gas/i386/x86-64-lfence-load.d: Add PREFETCHI.
* testsuite/gas/i386/x86-64-lfence-load.s: Likewise.
* testsuite/gas/i386/x86-64-prefetch.d: New test.
* testsuite/gas/i386/x86-64-prefetchi-intel.d: Likewise.
* testsuite/gas/i386/x86-64-prefetchi-inval-register.d: Likewise..
* testsuite/gas/i386/x86-64-prefetchi-inval-register.s: Likewise.
* testsuite/gas/i386/x86-64-prefetchi-warn.l: Likewise.
* testsuite/gas/i386/x86-64-prefetchi-warn.s: Likewise.
* testsuite/gas/i386/x86-64-prefetchi.d: Likewise.
* testsuite/gas/i386/x86-64-prefetchi.s: Likewise.
opcodes/ChangeLog:
* i386-dis.c (reg_table): Add MOD_0F18_REG_6 and MOD_0F18_REG_7
(x86_64_table): Add X86_64_0F18_REG_6_MOD_0 and X86_64_0F18_REG_7_MOD_0.
(mod_table): Add MOD_0F18_REG_6 and MOD_0F18_REG_7.
(prefix_table): Add PREFIX_0F18_REG_6_MOD_0_X86_64 and
PREFIX_0F18_REG_7_MOD_0_X86_64.
(PREFETCHI_Fixup): New.
* i386-gen.c (cpu_flag_init): Add CPU_PREFETCHI_FLAGS.
(cpu_flags): Add CpuPREFETCHI.
* i386-opc.h (CpuPREFETCHI): New.
(i386_cpu_flags): Add cpuprefetchi.
* i386-opc.tbl: Add Intel PREFETCHI instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
|
|
Clang attempts to minimize the size of the debug-info by not adding
complete information about types that aren't constructed in a given
file. Specifically, this meant that there was minimal information about
class B in the test gdb.cp/converts.exp. To fix this, we just need to
construct any object of type B in that file.
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
When running gdb.cp/ptype-flags.exp using Clang, we get an unexpected
failure when printing the type of a class with an internal typedef. This
happens because Clang doesn't add accessibility information for typedefs
inside classes (see https://github.com/llvm/llvm-project/issues/57608
for more info). To help with Clang testing, an XFAIL was added to this
test.
|
|
|
|
default.
PR 29457
* configure.ac: Add --enable-colored-disassembly.
* objdump.c: Add --disassembler-color=terminal.
* doc/binutils.texi (objdump): Document the new option.
* NEWS: Mention new feature.
* config.in: Regenerate in.
* configure: Regenerate.
|
|
|
|
|
|
Resubmission, taking into account
https://sourceware.org/pipermail/binutils/2022-October/123948.html.
|
|
|
|
Ref: https://gcc.gnu.org/wiki/DebugFissionDWP?action=recall&rev=3
Fuzzers have found a weakness in the code stashing pool section
entries. With random nonsensical values in the index entries (rather
than each index pointing to its own set distinct from other sets),
it's possible to overflow the space allocated, losing the NULL
terminator. Without a terminator, find_section_in_set can run off the
end of the shndx_pool buffer. Fix this by scanning the pool directly.
binutils/
* dwarf.c (add_shndx_to_cu_tu_entry): Delete range check.
(end_cu_tu_entry): Likewise.
(process_cu_tu_index): Fill shndx_pool by directly scanning
pool, rather than indirectly from index entries.
|
|
|
|
Wrap an overlong line in the definition of `param_integer_error' in
gdb.guile/scm-parameter.exp. No functional change.
|
|
Clang generates a warning if there is a function declaration/definition
with zero arguments. Such declarations/definitions without a prototype (an
argument list) are deprecated forms of indefinite arguments
("-Wdeprecated-non-prototype"). On the default configuration, it causes a
build failure (unless "--disable-werror" is specified).
But there is another issue. This function declaration in sim/sh/interp.c
is completely redundant. This commit just removes that declaration.
|
|
The variable "list" is only initialized when arg1 > 0 and when arg1 == 0,
an uninitialized value is passed to translate_endian_h2t function.
Although this behavior is harmless, this commit adds initialization to avoid
a GCC warning ("-Wmaybe-uninitialized").
|
|
Clang generates a warning if an argument is passed to a function without
prototype (zero arguments, even without (void)). Such calls are deprecated
forms of indefinite arguments passing ("-Wdeprecated-non-prototype").
On the default configuration, it (somehow) doesn't cause a build failure but
a warning is generated.
But because the cause is the same as the issue the author fixed in
"sim/erc32: Use int32_t as event callback argument", it would be better to
fix it now to prevent problems in the future.
To fix the issue, this commit makes struct irqcall to use int32_t as a
callback (callback) argument of an IRQ.
|
|
Clang generates a warning if an argument is passed to a function without
prototype (zero arguments, even without (void)). Such calls are deprecated
forms of indefinite arguments passing ("-Wdeprecated-non-prototype").
On the default configuration, it causes a build failure (unless
"--disable-werror" is specified).
To fix that, this commit makes struct evcell to use int32_t as a callback
(cfunc) argument of an event. int32_t is chosen because "event" function
accepts "int32_t arg".
|
|
Clang generates a warning if there is a function declaration/definition
with zero arguments. Such declarations/definitions without a prototype (an
argument list) are deprecated forms of indefinite arguments
("-Wdeprecated-non-prototype"). On the default configuration, it causes a
build failure (unless "--disable-werror" is specified).
This commit replaces () with (void) to avoid this warning.
|
|
When running test-case gdb.server/multi-ui-errors.exp on target board
remote-gdbserver-on-localhost.exp, I run into:
...
(gdb) PASS: gdb.server/multi-ui-errors.exp: connect to gdbserver
continue^M
Continuing.^M
PASS: gdb.server/multi-ui-errors.exp: continue - extra UI
Remote debugging from host ::1, port 35466^M
FAIL: gdb.server/multi-ui-errors.exp: ensure inferior is running
...
The problem is that the target board uses ssh -T, which fails to guarantee
that output from the inferior will be available.
Fix this by copying proc ${board}_spawn from local-remote-host.exp, which
ensures using ssh -t. [ It would be nice to define an ssh base board to
get rid of the copies, but I'm not addressing that in this commit. ]
Likewise for target board remote-stdio-gdbserver.exp.
Tested on x86_64-linux.
|
|
With test-case gdb.server/multi-ui-errors.exp and host board
local-remote-host-notty, I run into:
...
(gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
Executing on target: kill -9 29666 (timeout = 300)
builtin_spawn -ignore SIGHUP kill -9 29666^M
echo^M
Remote connection closed^M
(gdb) (gdb) FAIL: gdb.server/multi-ui-errors.exp: \
main UI, prompt after gdbserver dies (timeout)
...
In contrast, with local-remote-host (so, everything the same but editing off):
...
(gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
Executing on target: kill -9 31245 (timeout = 300)
builtin_spawn -ignore SIGHUP kill -9 31245^M
Remote connection closed^M
(gdb) echo^M
(gdb) PASS: gdb.server/multi-ui-errors.exp: main UI, prompt after gdbserver dies
...
The test-case issues a kill, which results in a "Remote connection closed"
message and a prompt.
The problem is that the prompt is not consumed, so the subsequent echo may be
issued before that prompt, which causes a mismatch when matching the result
of the echo.
Fix this by consuming the "Remote connection closed" message and prompt.
Tested on x86_64-linux.
|
|
With test-case gdb.server/multi-ui-errors.exp we see:
...
(gdb) PASS: multi-ui-errors.exp: main UI, prompt after gdbserver dies
continue^M
Continuing.^M
echo^M
(gdb) PASS: multi-ui-errors.exp: extra UI, prompt after gdbserver dies
...
The continue is issued earlier in the test-case, but the output has not been
consumed, which makes it show up much later.
Consume the continue output asap, to make it clear when the continue is issued:
...
(gdb) PASS: gdb.server/multi-ui-errors.exp: connect to gdbserver
continue^M
Continuing.^M
PASS: gdb.server/multi-ui-errors.exp: continue - extra UI
...
Tested on x86_64-linux.
|
|
The usage for board remote-stdio-gdbserver.exp is advertised as:
...
# bash$ make check RUNTESTFLAGS="--target_board=remote-stdio-gdbserver \
# REMOTE_USERNAME=... REMOTE_HOSTNAME=... REMOTE_PORTNUM=... \
# [REMOTE_TMPDIR=${remote_dir}] [GDBSERVER=${remote_gdbserver}]"
...
but when adding REMOTE_PORTNUM=22, I run into:
...
Running stop-reply-no-thread-multi.exp ...
ERROR: tcl error sourcing stop-reply-no-thread-multi.exp.
ERROR: couldn't execute "/usr/bin/ssh -p22": no such file or directory
while executing
"builtin_spawn {/usr/bin/ssh -p22} -l vries localhost {/usr/bin/gdbserver \
--once localhost:2346 \
/home/vries/gdb_versions/devel/build/gdb/testsuite/outp..."
...
Fix this by simply removing REMOTE_PORTNUM.
Tested on x86_64-linux.
|
|
Because of a Libiberty hack, getopt on GNU libc (2.25 or earlier) is
currently unusable on sim, causing a regression on CentOS 7.
This is caused as follows:
1. If HAVE_DECL_GETOPT is defined (getopt declaration with known prototype
is detected while configuration), a declaration of getopt in
"include/getopt.h" is suppressed.
The author started to define HAVE_DECL_GETOPT in sim with the commit
340aa4f6872c ("sim: Check known getopt definition existence").
2. GNU libc (2.25 or earlier)'s <unistd.h> includes <getopt.h> with a
special purpose macro defined to declare only getopt function but due
to include path (not tested while configuration), it causes <unistd.h>
to include Libiberty's "include/getopt.h".
3. If both 1. and 2. are satisfied, despite that <unistd.h> tries to
declare getopt by including <getopt.h>, "include/getopt.h" does not do
so, causing getopt function undeclared.
Getting rid of "include/getopt.h" (e.g. renaming this header file) is the
best solution to avoid hacking but as a short-term solution, this commit
replaces getopt with getopt_long under sim/.
|
|
And do the sanity check in a way that can't overflow.
* pef.c (bfd_pef_parse_function_stubs): Sanity check header
imported_library_count and total_imported_symbol_count before
allocating memory.
|
|
* objcopy.c (copy_archive): Free l->name.
|
|
objcopy copy_object may omit the call to bfd_copy_private_bfd_data for
various conditions deemed non-fatal, in which case obj_som_exec_data
will be NULL for the output file.
* som.c (som_finish_writing): Don't dereference NULL
obj_som_exec_data.
|
|
Before figuring out the suppress rule of mapping symbol with architecture
(changed back to $x), always generate them at the start of the sections.
gas/
* config/tc-riscv.c (need_arch_map_symbol): Removed.
(riscv_mapping_state): Updated.
(riscv_check_mapping_symbols): Updated.
* testsuite/gas/riscv/mapping-non-arch.d: Removed.
* testsuite/gas/riscv/mapping-non-arch.s: Likewise.
|
|
|
|
This has been supported since eb668e50036 ("RISC-V: Add Zawrs ISA
extension support").
|
|
|
|
This changes compunit_language to be a method on compunit_symtab.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
This commit improves internal error message
"internal: bad RISC-V opcode (bits 0x%lx undefined): %s %s"
to display actual unused bits (excluding non-instruction bits).
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Exclude non-
instruction bits from displaying internal diagnostics.
Change error message slightly.
|
|
We don't support instructions longer than 64-bits yet. Still, we can
modify validate_riscv_insn function to prevent unexpected behavior by
limiting the "length" of an instruction to 64-bit (or less).
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Fix function
description comment based on current spec. Limit instruction
length up to 64-bit for now. Make sure that required_bits does
not corrupt even if unsigned long long is longer than 64-bit.
|
|
Some versions of gcc warn by default about shadowed outer-scope
declarations. This affects frag_align_code, which is declared in
frags.h. Rename the offending function parameter. While there also
switch to using true/false at the function call sites.
|
|
Commit 40f1a1a4564b ("RISC-V: Output mapping symbols with ISA string.")
caused a build failure on GCC 12 as follows:
make[3]: Entering directory '$(builddir)/gas'
CC config/tc-riscv.o
In file included from $(srcdir)/gas/config/tc-riscv.c:23:
$(srcdir)/gas/as.h: In function ‘make_mapping_symbol’:
$(srcdir)/gas/as.h:123:15: error: ‘buff’ may be used uninitialized [-Werror=maybe-uninitialized]
123 | #define xfree free
| ^~~~
$(srcdir)/gas/config/tc-riscv.c:487:9: note: ‘buff’ was declared here
487 | char *buff;
| ^~~~
cc1: all warnings being treated as errors
make[3]: *** [Makefile:1425: config/tc-riscv.o] Error 1
This is caused by a false positive of "maybe uninitialized" variable
detection (-Wmaybe-uninitialized). To avoid this error, this commit
initializes the local variable buff to NULL first in all cases.
gas/ChangeLog:
* config/tc-riscv.c (make_mapping_symbol): Initialize variable
buff with NULL to avoid build failure caused by a GCC's false
positive of maybe uninitialized variable detection.
|
|
In gdb/nat/linux-btrace.c:btrace_this_cpu() we initialize the cpu
structure given to the libipt btrace decoder.
We only consider the extended model field for family 0x6 and forget about
family 0xf and we don't consider the extended family field. Fix it.
|
|
"-Wdeprecated-declarations" warning option can be helpful to track
deprecated function delarations but sometimes we need to disable this
warning for a good reason.
DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS is an existing macro but only
defined on Clang. Since "-Wdeprecated-declarations" is also available on
GCC (>= 3.4.0), this commit adds equivalent definition as Clang.
__GNUC__ and __GNUC_MINOR__ are not checked because this header file seems
to assume GCC >= 4.6 (with "GCC diagnostic push/pop").
include/ChangeLog:
* diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS):
Define also on GCC.
|
|
RISC-V Psabi pr196,
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/196
bfd/
* elfxx-riscv.c (riscv_release_subset_list): Free arch_str if needed.
(riscv_copy_subset_list): Copy arch_str as well.
* elfxx-riscv.h (riscv_subset_list_t): Store arch_str for each subset list.
gas/
* config/tc-riscv.c (riscv_reset_subsets_list_arch_str): Update the
architecture string in the subset_list.
(riscv_set_arch): Call riscv_reset_subsets_list_arch_str after parsing new
architecture string.
(s_riscv_option): Likewise.
(need_arch_map_symbol): New boolean, used to indicate if .option
directives do affect instructions.
(make_mapping_symbol): New boolean parameter reset_seg_arch_str. Need to
generate $x+arch for MAP_INSN, and then store it into tc_segment_info_data
if reset_seg_arch_str is true.
(riscv_mapping_state): Decide if we need to add $x+arch for MAP_INSN. For
now, only add $x+arch if the architecture strings in subset list and segment
are different. Besides, always add $x+arch at the start of section, and do
not add $x+arch for code alignment, since rvc for alignment can be judged
from addend of R_RISCV_ALIGN.
(riscv_remove_mapping_symbol): If current and previous mapping symbol have
same value, then remove the current $x only if the previous is $x+arch;
Otherwise, always remove previous.
(riscv_add_odd_padding_symbol): Updated.
(riscv_check_mapping_symbols): Don't need to add any $x+arch if
need_arch_map_symbol is false, so changed them to $x.
(riscv_frag_align_code): Updated since riscv_mapping_state is changed.
(riscv_init_frag): Likewise.
(s_riscv_insn): Likewise.
(riscv_elf_final_processing): Call riscv_release_subset_list to release
subset_list of riscv_rps_as, rather than only release arch_str in the
riscv_write_out_attrs.
(riscv_write_out_attrs): No need to call riscv_arch_str, just get arch_str
from subset_list of riscv_rps_as.
* config/tc-riscv.h (riscv_segment_info_type): Record current $x+arch mapping
symbol of each segment.
* testsuite/gas/riscv/mapping-0*: Merged and replaced by mapping.s.
* testsuite/gas/riscv/mapping.s: New testcase, to test most of the cases in
one file.
* testsuite/gas/riscv/mapping-symbols.d: Likewise.
* testsuite/gas/riscv/mapping-dis.d: Likewise.
* testsuite/gas/riscv/mapping-non-arch.s: New testcase for the case that
does need any $x+arch.
* testsuite/gas/riscv/mapping-non-arch.d: Likewise.
* testsuite/gas/riscv/option-arch-01a.d: Updated.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Set riscv_fpr_names back to
riscv_fpr_names_abi or riscv_fpr_names_numeric when zfinx is disabled
for some specfic code region.
(riscv_get_map_state): Recognized mapping symbols $x+arch, and then reset
the architecture string once the ISA is different.
|
|
binutils/
* MAINTAINERS(C-SKY): update e-mails of Lifang & Yunhai.
|
|
gas/
* config/tc-ppc.c (md_assemble): Only check for prefix opcodes.
* testsuite/gas/ppc/rfc02658.s: New test.
* testsuite/gas/ppc/rfc02658.d: Likewise.
* testsuite/gas/ppc/ppc.exp: Run it.
opcodes/
* ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New.
(powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp,
dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2,
dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn,
dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4,
pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np,
pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn,
pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn.
|
|
gas/
* config/tc-ppc.c (pre_defined_registers): Add dense math registers.
(md_assemble): Check dmr specified in correct operand.
* testsuite/gas/ppc/outerprod.s <dmsetaccz, dmxvbf16ger2,
dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp,
dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp,
dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp,
dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp,
dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8,
dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxmfacc,
dmxxmtacc, pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np,
pmdmxvbf16ger2pn, pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn,
pmdmxvf16ger2np, pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger,
pmdmxvf32gernn, pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp,
pmdmxvf64ger, pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn,
pmdmxvf64gerpp, pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s,
pmdmxvi16ger2spp, pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4,
pmdmxvi8ger4pp, pmdmxvi8ger4spp>: Add new tests.
* testsuite/gas/ppc/outerprod.d: Likewise.
* testsuite/gas/ppc/rfc02653.s: New test.
* testsuite/gas/ppc/rfc02653.d: Likewise.
* testsuite/gas/ppc/ppc.exp: Run it.
include/
* opcode/ppc.h (PPC_OPERAND_DMR): Define. Renumber following
PPC_OPERAND defines.
opcodes/
* ppc-dis.c (print_insn_powerpc): Prepend 'dm' when printing DMR regs.
* ppc-opc.c (insert_p2, (extract_p2, (insert_xa5, (extract_xa5,
insert_xb5, (extract_xb5): New functions.
(insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): Disallow
operand overlap only on Power10.
(DMR, DMRAB, P1, P2, XA5p, XB5p, XDMR_MASK, XDMRDMR_MASK, XX2ACC_MASK,
XX2DMR_MASK, XX3DMR_MASK): New defines.
(powerpc_opcodes): Add dmmr, dmsetaccz, dmsetdmrz, dmxor, dmxvbf16ger2,
dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp,
dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp,
dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp,
dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp,
dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8,
dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxextfdmr256,
dmxxextfdmr512, dmxxinstdmr256, dmxxinstdmr512, dmxxmfacc, dmxxmtacc,
pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np, pmdmxvbf16ger2pn,
pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn, pmdmxvf16ger2np,
pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger, pmdmxvf32gernn,
pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp, pmdmxvf64ger,
pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn, pmdmxvf64gerpp,
pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s, pmdmxvi16ger2spp,
pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4, pmdmxvi8ger4pp,
pmdmxvi8ger4spp.
|
|
|