* configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT

	after AC_PROG_CC.
	* aclocal.m4, configure: Rebuild with current tools.
Also add sanitization to ChangeLog.

4 files changed, 853 insertions, 698 deletions

diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 25f60c8..8057cee 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,3 +1,9 @@
+Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
+	after AC_PROG_CC.
+	* aclocal.m4, configure: Rebuild with current tools.
+
 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 
 	* opintl.h: New file - contains internationalisation macros used
@@ -22,13 +28,15 @@ Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 	* arc-opc.c: Internationalised.
 	* arm-dis.c: Internationalised.
 	* cgen-asm.c: Internationalised.
-	* cgen-asm.in: Internationalised.
-	* cgen-dis.in: Internationalised.
+start-sanitize-d30v
 	* d30v-dis.c: Internationalised.
+end-sanitize-d30v
 	* dis-buf.c: Internationalised.
+start-sanitize-sky
 	* dvp-dis.c: Internationalised.
 	* dvp-opc.c: Internationalised. 
 	* dvp-opc.c: Internationalised.
+end-sanitize-sky
 	* h8300-dis.c: Internationalised.
 	* h8500-dis.c: Internationalised.
 	* i386-dis.c: Internationalised.
@@ -43,7 +51,7 @@ Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 	* sparc-dis.c: Internationalised.
 	* v850-dis.c: Internationalised.
 	* v850-opc.c: Internationalised.
-	
+
 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
 
 	* cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4
index 82c7e53..d38c985 100644
--- a/opcodes/aclocal.m4
+++ b/opcodes/aclocal.m4
@@ -163,11 +163,17 @@ case "$host" in
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   CFLAGS="$CFLAGS -belf"
   ;;
+
+*-*-cygwin32*)
+  AM_SYS_LIBTOOL_CYGWIN32
+  ;;
+
 esac
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
 LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
 $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
 || AC_MSG_ERROR([libtool configure failed])
@@ -257,7 +263,9 @@ if test "$ac_cv_prog_gcc" = yes; then
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
   # Accept absolute paths.
+changequote(,)dnl
   /* | [A-Za-z]:\\*)
+changequote([,])dnl
     test -z "$LD" && LD="$ac_prog"
     ;;
   "")
@@ -320,11 +328,7 @@ fi])
 AC_DEFUN(AM_PROG_NM,
 [AC_MSG_CHECKING([for BSD-compatible nm])
 AC_CACHE_VAL(ac_cv_path_NM,
-[case "$NM" in
-/* | [A-Za-z]:\\*)
-  ac_cv_path_NM="$NM" # Let the user override the test with a path.
-  ;;
-*)
+[if test -z "$NM"; then
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
     test -z "$ac_dir" && ac_dir=.
@@ -344,13 +348,20 @@ AC_CACHE_VAL(ac_cv_path_NM,
   done
   IFS="$ac_save_ifs"
   test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-  ;;
-esac])
+else
+  ac_cv_path_NM="$NM" # Let the user override the test with a path.
+fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
 AC_SUBST(NM)
 ])
 
+# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32
+AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32,
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+AC_CHECK_TOOL(AS, as, false)
+])
+
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
 AC_DEFUN(AM_CONFIG_HEADER,
@@ -374,6 +385,93 @@ for am_file in <<$1>>; do
 done<<>>dnl>>)
 changequote([,]))])
 
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  if test $USE_MAINTAINER_MODE = yes; then
+    MAINT=
+  else
+    MAINT='#M#'
+  fi
+  AC_SUBST(MAINT)dnl
+]
+)
+
+# Check to see if we're running under Cygwin32, without using
+# AC_CANONICAL_*.  If so, set output variable CYGWIN32 to "yes".
+# Otherwise set it to "no".
+
+dnl AM_CYGWIN32()
+AC_DEFUN(AM_CYGWIN32,
+[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32,
+[AC_TRY_COMPILE(,[return __CYGWIN32__;],
+am_cv_cygwin32=yes, am_cv_cygwin32=no)
+rm -f conftest*])
+CYGWIN32=
+test "$am_cv_cygwin32" = yes && CYGWIN32=yes])
+
+# Check to see if we're running under Win32, without using
+# AC_CANONICAL_*.  If so, set output variable EXEEXT to ".exe".
+# Otherwise set it to "".
+
+dnl AM_EXEEXT()
+dnl This knows we add .exe if we're building in the Cygwin32
+dnl environment. But if we're not, then it compiles a test program
+dnl to see if there is a suffix for executables.
+AC_DEFUN(AM_EXEEXT,
+[AC_REQUIRE([AM_CYGWIN32])
+AC_REQUIRE([AM_MINGW32])
+AC_MSG_CHECKING([for executable suffix])
+AC_CACHE_VAL(am_cv_exeext,
+[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=
+for file in am_c_test.*; do
+   case $file in
+    *.c) ;;
+    *.o) ;;
+    *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+   esac
+done
+rm -f am_c_test*])
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+AC_MSG_RESULT(${am_cv_exeext})
+AC_SUBST(EXEEXT)])
+
+# Check to see if we're running under Mingw, without using
+# AC_CANONICAL_*.  If so, set output variable MINGW32 to "yes".
+# Otherwise set it to "no".
+
+dnl AM_MINGW32()
+AC_DEFUN(AM_MINGW32,
+[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32,
+[AC_TRY_COMPILE(,[return __MINGW32__;],
+am_cv_mingw32=yes, am_cv_mingw32=no)
+rm -f conftest*])
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes])
+
 # This file is derived from `gettext.m4'.  The difference is that the
 # included macros assume Cygnus-style source and build trees.
 
@@ -717,90 +815,3 @@ AC_DEFUN(AM_LC_MESSAGES,
     fi
   fi])
 
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-  if test $USE_MAINTAINER_MODE = yes; then
-    MAINT=
-  else
-    MAINT='#M#'
-  fi
-  AC_SUBST(MAINT)dnl
-]
-)
-
-# Check to see if we're running under Cygwin32, without using
-# AC_CANONICAL_*.  If so, set output variable CYGWIN32 to "yes".
-# Otherwise set it to "no".
-
-dnl AM_CYGWIN32()
-AC_DEFUN(AM_CYGWIN32,
-[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32,
-[AC_TRY_COMPILE(,[return __CYGWIN32__;],
-am_cv_cygwin32=yes, am_cv_cygwin32=no)
-rm -f conftest*])
-CYGWIN32=
-test "$am_cv_cygwin32" = yes && CYGWIN32=yes])
-
-# Check to see if we're running under Win32, without using
-# AC_CANONICAL_*.  If so, set output variable EXEEXT to ".exe".
-# Otherwise set it to "".
-
-dnl AM_EXEEXT()
-dnl This knows we add .exe if we're building in the Cygwin32
-dnl environment. But if we're not, then it compiles a test program
-dnl to see if there is a suffix for executables.
-AC_DEFUN(AM_EXEEXT,
-[AC_REQUIRE([AM_CYGWIN32])
-AC_REQUIRE([AM_MINGW32])
-AC_MSG_CHECKING([for executable suffix])
-AC_CACHE_VAL(am_cv_exeext,
-[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
-am_cv_exeext=.exe
-else
-cat > am_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=
-for file in am_c_test.*; do
-   case $file in
-    *.c) ;;
-    *.o) ;;
-    *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
-   esac
-done
-rm -f am_c_test*])
-test x"${am_cv_exeext}" = x && am_cv_exeext=no
-fi
-EXEEXT=""
-test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
-AC_MSG_RESULT(${am_cv_exeext})
-AC_SUBST(EXEEXT)])
-
-# Check to see if we're running under Mingw, without using
-# AC_CANONICAL_*.  If so, set output variable MINGW32 to "yes".
-# Otherwise set it to "no".
-
-dnl AM_MINGW32()
-AC_DEFUN(AM_MINGW32,
-[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32,
-[AC_TRY_COMPILE(,[return __MINGW32__;],
-am_cv_mingw32=yes, am_cv_mingw32=no)
-rm -f conftest*])
-MINGW32=
-test "$am_cv_mingw32" = yes && MINGW32=yes])
-
diff --git a/opcodes/configure b/opcodes/configure
index bcbd3e4..e06bda9 100755
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -26,12 +26,12 @@ ac_help="$ac_help
 ac_help="$ac_help
   --enable-commonbfdlib   build shared BFD/opcodes/libiberty library"
 ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
+ac_help="$ac_help
   --disable-nls           do not use Native Language Support"
 ac_help="$ac_help
   --with-included-gettext use the GNU gettext library included here"
-ac_help="$ac_help
-  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -649,6 +649,197 @@ test "$host_alias" != "$target_alias" &&
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
 
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:656: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:685: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  ac_prog_rejected=no
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:733: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 743 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:767: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:772: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:781: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:796: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:824: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+  echo "$ac_t""yes" 1>&6
+  ISC=yes # If later tests want to check for ISC.
+  cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+  if test "$GCC" = yes; then
+    CC="$CC -posix"
+  else
+    CC="$CC -Xp"
+  fi
+else
+  echo "$ac_t""no" 1>&6
+  ISC=
+fi
+
 
 # We currently only use the version number for the name of any shared
 # library.  For user convenience, we always use the same version
@@ -667,7 +858,7 @@ BFD_VERSION=`grep INIT_AUTOMAKE ${srcdir}/../bfd/configure.in | sed -n -e 's/[
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:671: checking for a BSD compatible install" >&5
+echo "configure:862: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -721,7 +912,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:725: checking whether build environment is sane" >&5
+echo "configure:916: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -778,7 +969,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:782: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:973: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -824,7 +1015,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:828: checking for working aclocal" >&5
+echo "configure:1019: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -837,7 +1028,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:841: checking for working autoconf" >&5
+echo "configure:1032: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -850,7 +1041,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:854: checking for working automake" >&5
+echo "configure:1045: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -863,7 +1054,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:867: checking for working autoheader" >&5
+echo "configure:1058: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -876,7 +1067,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:880: checking for working makeinfo" >&5
+echo "configure:1071: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -899,7 +1090,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:903: checking for $ac_word" >&5
+echo "configure:1094: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -930,7 +1121,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:934: checking for $ac_word" >&5
+echo "configure:1125: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -961,7 +1152,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:965: checking for $ac_word" >&5
+echo "configure:1156: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1043,7 +1234,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1047: checking for $ac_word" >&5
+echo "configure:1238: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1069,176 +1260,6 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1076: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1105: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  ac_prog_rejected=no
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1153: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 1163 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:1167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1187: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1192: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1201: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1216: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
 # Check whether --with-gnu-ld or --without-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
   withval="$with_gnu_ld"
@@ -1252,11 +1273,11 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1256: checking for ld used by GCC" >&5
+echo "configure:1277: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
   # Accept absolute paths.
-  /* | A-Za-z:\\*)
+  /* | [A-Za-z]:\\*)
     test -z "$LD" && LD="$ac_prog"
     ;;
   "")
@@ -1270,10 +1291,10 @@ echo "configure:1256: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1274: checking for GNU ld" >&5
+echo "configure:1295: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1277: checking for non-GNU ld" >&5
+echo "configure:1298: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1309,7 +1330,7 @@ fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1313: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1334: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1325,15 +1346,11 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1329: checking for BSD-compatible nm" >&5
+echo "configure:1350: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  case "$NM" in
-/* | A-Za-z:\\*)
-  ac_cv_path_NM="$NM" # Let the user override the test with a path.
-  ;;
-*)
+  if test -z "$NM"; then
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
     test -z "$ac_dir" && ac_dir=.
@@ -1353,8 +1370,9 @@ else
   done
   IFS="$ac_save_ifs"
   test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-  ;;
-esac
+else
+  ac_cv_path_NM="$NM" # Let the user override the test with a path.
+fi
 fi
 
 NM="$ac_cv_path_NM"
@@ -1362,7 +1380,7 @@ echo "$ac_t""$NM" 1>&6
 
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1366: checking whether ln -s works" >&5
+echo "configure:1384: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1398,8 +1416,8 @@ test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 case "$host" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1402 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1420 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1419,11 +1437,147 @@ case "$host" in
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   CFLAGS="$CFLAGS -belf"
   ;;
+
+*-*-cygwin32*)
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1446: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+  echo "$ac_t""$DLLTOOL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_DLLTOOL"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1477: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_DLLTOOL="dlltool"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+  echo "$ac_t""$DLLTOOL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  DLLTOOL="false"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1511: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ac_tool_prefix}as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_AS"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1542: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  AS="false"
+fi
+fi
+
+
+  ;;
+
 esac
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
 LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
 $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
@@ -1476,9 +1630,292 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:1635: checking whether to enable maintainer-specific portions of Makefiles" >&5
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+  if test $USE_MAINTAINER_MODE = yes; then
+    MAINT=
+  else
+    MAINT='#M#'
+  fi
+  
+
+echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
+echo "configure:1653: checking for Cygwin32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1658 "configure"
+#include "confdefs.h"
+
+int main() {
+return __CYGWIN32__;
+; return 0; }
+EOF
+if { (eval echo configure:1665: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_cygwin32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_cygwin32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_cygwin32" 1>&6
+CYGWIN32=
+test "$am_cv_cygwin32" = yes && CYGWIN32=yes
+echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
+echo "configure:1682: checking for Mingw32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1687 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:1694: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_mingw32" 1>&6
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1713: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=
+for file in am_c_test.*; do
+   case $file in
+    *.c) ;;
+    *.o) ;;
+    *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+   esac
+done
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
+# host-specific stuff:
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1749: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1778: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  ac_prog_rejected=no
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1826: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 1836 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:1840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1860: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1865: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1889: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
 ALL_LINGUAS=
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1482: checking how to run the C preprocessor" >&5
+echo "configure:1919: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1493,13 +1930,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1497 "configure"
+#line 1934 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1503: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1940: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -1510,13 +1947,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1514 "configure"
+#line 1951 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1520: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -1538,34 +1975,13 @@ else
 fi
 echo "$ac_t""$CPP" 1>&6
 
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1543: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
-  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
-  echo "$ac_t""yes" 1>&6
-  ISC=yes # If later tests want to check for ISC.
-  cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
-  if test "$GCC" = yes; then
-    CC="$CC -posix"
-  else
-    CC="$CC -Xp"
-  fi
-else
-  echo "$ac_t""no" 1>&6
-  ISC=
-fi
-
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1564: checking for ANSI C header files" >&5
+echo "configure:1980: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1569 "configure"
+#line 1985 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1573,7 +1989,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1577: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1993: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1590,7 +2006,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1594 "configure"
+#line 2010 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1608,7 +2024,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1612 "configure"
+#line 2028 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1629,7 +2045,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1633 "configure"
+#line 2049 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1640,7 +2056,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1664,12 +2080,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1668: checking for working const" >&5
+echo "configure:2084: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1673 "configure"
+#line 2089 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1718,7 +2134,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:1722: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2138: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -1739,21 +2155,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1743: checking for inline" >&5
+echo "configure:2159: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1750 "configure"
+#line 2166 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2173: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1779,12 +2195,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1783: checking for off_t" >&5
+echo "configure:2199: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1788 "configure"
+#line 2204 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1812,12 +2228,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1816: checking for size_t" >&5
+echo "configure:2232: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1821 "configure"
+#line 2237 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1847,19 +2263,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1851: checking for working alloca.h" >&5
+echo "configure:2267: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1856 "configure"
+#line 2272 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:1863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -1880,12 +2296,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1884: checking for alloca" >&5
+echo "configure:2300: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1889 "configure"
+#line 2305 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -1908,7 +2324,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:1912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -1940,12 +2356,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1944: checking whether alloca needs Cray hooks" >&5
+echo "configure:2360: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1949 "configure"
+#line 2365 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -1970,12 +2386,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1974: checking for $ac_func" >&5
+echo "configure:2390: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1979 "configure"
+#line 2395 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1998,7 +2414,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2025,7 +2441,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2029: checking stack direction for C alloca" >&5
+echo "configure:2445: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2033,7 +2449,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2037 "configure"
+#line 2453 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2052,7 +2468,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2077,17 +2493,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2081: checking for $ac_hdr" >&5
+echo "configure:2497: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2086 "configure"
+#line 2502 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2091: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2507: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2116,12 +2532,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2120: checking for $ac_func" >&5
+echo "configure:2536: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2125 "configure"
+#line 2541 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2144,7 +2560,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2169,7 +2585,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2173: checking for working mmap" >&5
+echo "configure:2589: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2177,7 +2593,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2181 "configure"
+#line 2597 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -2317,7 +2733,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:2321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -2345,17 +2761,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2349: checking for $ac_hdr" >&5
+echo "configure:2765: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2354 "configure"
+#line 2770 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2385,12 +2801,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2389: checking for $ac_func" >&5
+echo "configure:2805: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2394 "configure"
+#line 2810 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2413,7 +2829,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2417: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2442,12 +2858,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2446: checking for $ac_func" >&5
+echo "configure:2862: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2451 "configure"
+#line 2867 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2470,7 +2886,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2504,19 +2920,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2508: checking for LC_MESSAGES" >&5
+echo "configure:2924: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2513 "configure"
+#line 2929 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:2520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -2537,7 +2953,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2541: checking whether NLS is requested" >&5
+echo "configure:2957: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -2557,7 +2973,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:2561: checking whether included gettext is requested" >&5
+echo "configure:2977: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -2576,17 +2992,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:2580: checking for libintl.h" >&5
+echo "configure:2996: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2585 "configure"
+#line 3001 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2590: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2603,19 +3019,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:2607: checking for gettext in libc" >&5
+echo "configure:3023: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2612 "configure"
+#line 3028 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:2619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -2631,7 +3047,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:2635: checking for bindtextdomain in -lintl" >&5
+echo "configure:3051: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2639,7 +3055,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2643 "configure"
+#line 3059 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2650,7 +3066,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:2654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2666,19 +3082,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:2670: checking for gettext in libintl" >&5
+echo "configure:3086: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2675 "configure"
+#line 3091 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:2682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -2706,7 +3122,7 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2710: checking for $ac_word" >&5
+echo "configure:3126: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2740,12 +3156,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2744: checking for $ac_func" >&5
+echo "configure:3160: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2749 "configure"
+#line 3165 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2768,7 +3184,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2795,7 +3211,7 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2799: checking for $ac_word" >&5
+echo "configure:3215: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2830,7 +3246,7 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2834: checking for $ac_word" >&5
+echo "configure:3250: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2862,7 +3278,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 2866 "configure"
+#line 3282 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2870,7 +3286,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:2874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -2902,7 +3318,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2906: checking for $ac_word" >&5
+echo "configure:3322: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2936,7 +3352,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2940: checking for $ac_word" >&5
+echo "configure:3356: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2971,7 +3387,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2975: checking for $ac_word" >&5
+echo "configure:3391: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3061,7 +3477,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3065: checking for catalogs to be installed" >&5
+echo "configure:3481: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -3089,17 +3505,17 @@ echo "configure:3065: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3093: checking for linux/version.h" >&5
+echo "configure:3509: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3098 "configure"
+#line 3514 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3103: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3519: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3161,289 +3577,6 @@ fi
    fi
   
 
-echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3166: checking whether to enable maintainer-specific portions of Makefiles" >&5
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-  if test $USE_MAINTAINER_MODE = yes; then
-    MAINT=
-  else
-    MAINT='#M#'
-  fi
-  
-
-echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:3184: checking for Cygwin32 environment" >&5
-if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
-#include "confdefs.h"
-
-int main() {
-return __CYGWIN32__;
-; return 0; }
-EOF
-if { (eval echo configure:3196: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  am_cv_cygwin32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  am_cv_cygwin32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$am_cv_cygwin32" 1>&6
-CYGWIN32=
-test "$am_cv_cygwin32" = yes && CYGWIN32=yes
-echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
-echo "configure:3213: checking for Mingw32 environment" >&5
-if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 3218 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:3225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  am_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  am_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$am_cv_mingw32" 1>&6
-MINGW32=
-test "$am_cv_mingw32" = yes && MINGW32=yes
-
-
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3244: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
-am_cv_exeext=.exe
-else
-cat > am_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=
-for file in am_c_test.*; do
-   case $file in
-    *.c) ;;
-    *.o) ;;
-    *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
-   esac
-done
-rm -f am_c_test*
-fi
-
-test x"${am_cv_exeext}" = x && am_cv_exeext=no
-fi
-EXEEXT=""
-test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
-echo "$ac_t""${am_cv_exeext}" 1>&6
-
-
-# host-specific stuff:
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3280: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3309: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  ac_prog_rejected=no
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:3357: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 3367 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:3371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:3391: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:3396: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:3420: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
 . ${srcdir}/../bfd/configure.host
 
 
@@ -3455,17 +3588,17 @@ for ac_hdr in string.h strings.h stdlib.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3459: checking for $ac_hdr" >&5
+echo "configure:3592: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3464 "configure"
+#line 3597 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3469: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3602: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3507,7 +3640,7 @@ if test $use_cgen = yes ; then
     # Extract the first word of "guile", so it can be a program name with args.
 set dummy guile; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3511: checking for $ac_word" >&5
+echo "configure:3644: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_SCHEME'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3823,6 +3956,7 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
+s%@CC@%$CC%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
@@ -3836,11 +3970,14 @@ s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
 s%@AR@%$AR%g
 s%@RANLIB@%$RANLIB%g
-s%@CC@%$CC%g
 s%@LD@%$LD%g
 s%@NM@%$NM%g
 s%@LN_S@%$LN_S%g
 s%@LIBTOOL@%$LIBTOOL%g
+s%@DLLTOOL@%$DLLTOOL%g
+s%@AS@%$AS%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
 s%@CPP@%$CPP%g
 s%@ALLOCA@%$ALLOCA%g
 s%@USE_NLS@%$USE_NLS%g
@@ -3863,8 +4000,6 @@ s%@GT_NO@%$GT_NO%g
 s%@GT_YES@%$GT_YES%g
 s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
 s%@l@%$l%g
-s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
 s%@HDEFINES@%$HDEFINES%g
 s%@SCHEME@%$SCHEME%g
 s%@WIN32LDFLAGS@%$WIN32LDFLAGS%g
diff --git a/opcodes/configure.in b/opcodes/configure.in
index b47326b..35fde18 100644
--- a/opcodes/configure.in
+++ b/opcodes/configure.in
@@ -5,6 +5,7 @@ AC_PREREQ(2.5)
 AC_INIT(z8k-dis.c)
 
 AC_CANONICAL_SYSTEM
+AC_ISC_POSIX
 
 # We currently only use the version number for the name of any shared
 # library.  For user convenience, we always use the same version
@@ -49,9 +50,6 @@ if test -z "$target" ; then
 fi
 AC_ARG_PROGRAM
 
-ALL_LINGUAS=
-CY_GNU_GETTEXT
-
 AM_MAINTAINER_MODE
 AM_CYGWIN32
 AM_EXEEXT
@@ -60,6 +58,9 @@ AM_EXEEXT
 
 AC_PROG_CC
 
+ALL_LINGUAS=
+CY_GNU_GETTEXT
+
 . ${srcdir}/../bfd/configure.host
 
 AC_SUBST(HDEFINES)