aboutsummaryrefslogtreecommitdiff
path: root/lto-plugin/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe1-0/+1
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-06-22configure: Implement --enable-host-bind-nowMarek Polacek1-0/+11
As promised in the --enable-host-pie patch, this patch adds another configure option, --enable-host-bind-now, which adds -z now when linking the compiler executables in order to extend hardening. BIND_NOW with RELRO allows the GOT to be marked RO; this prevents GOT modification attacks. This option does not affect linking of target libraries; you can use LDFLAGS_FOR_TARGET=-Wl,-z,relro,-z,now to enable RELRO/BIND_NOW. With this patch: $ readelf -Wd cc1{,plus,obj,gm2} f951 lto1 cpp rust1 gnat1 | grep FLAGS 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE c++tools/ChangeLog: * configure.ac (--enable-host-bind-now): New check. * configure: Regenerate. gcc/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Add -Wl,-z,now to LD_PICFLAG if --enable-host-bind-now. * configure: Regenerate. * doc/install.texi: Document --enable-host-bind-now. lto-plugin/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Link with -z,now. * configure: Regenerate.
2022-11-22Revert "configure: Implement --enable-host-bind-now"Marek Polacek1-11/+0
This reverts commit 258d7149f92f19380c9f7763618d62408c064e60.
2022-11-22configure: Implement --enable-host-bind-nowMarek Polacek1-0/+11
As promised in the --enable-host-pie patch, this patch adds another configure option, --enable-host-bind-now, which adds -z now when linking the compiler executables in order to extend hardening. BIND_NOW with RELRO allows the GOT to be marked RO; this prevents GOT modification attacks. This option does not affect linking of target libraries; you can use LDFLAGS_FOR_TARGET=-Wl,-z,relro,-z,now to enable RELRO/BIND_NOW. c++tools/ChangeLog: * configure.ac (--enable-host-bind-now): New check. * configure: Regenerate. gcc/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Add -Wl,-z,now to LD_PICFLAG if --enable-host-bind-now. * configure: Regenerate. * doc/install.texi: Document --enable-host-bind-now. lto-plugin/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Link with -z,now. * configure: Regenerate.
2022-08-01lto: replace $target with $host in configure.ac [PR106170]Martin Liska1-1/+1
PR lto/106170 lto-plugin/ChangeLog: * configure.ac: Replace $target with $host. * configure: Regenerate.
2022-07-14lto-plugin: use -pthread only for detected targetsMartin Liska1-0/+5
Use -pthread only if we are going to use pthread functionality. PR bootstrap/106156 lto-plugin/ChangeLog: * Makefile.am: Use ac_lto_plugin_extra_ldflags for AM_LDFLAGS. * configure.ac: Use AC_SUBST(ac_lto_plugin_extra_ldflags). * Makefile.in: Regenerate. * configure: Regenerate.
2022-07-07lto-plugin: use locking only for selected targetsMartin Liska1-2/+15
For now, support locking only for linux targets that are different from riscv* where the target depends on libatomic (and fails during bootstrap). PR lto/106170 lto-plugin/ChangeLog: * configure.ac: Configure HAVE_PTHREAD_LOCKING. * lto-plugin.c (LOCK_SECTION): New. (UNLOCK_SECTION): New. (claim_file_handler): Use the newly added macros. (onload): Likewise. * config.h.in: Regenerate. * configure: Regenerate.
2022-07-01lto: pass -pthread to AM_LDFLAGS [PR 106118]Pekka Seppänen1-3/+0
Move -pthread from configure.ac to Makefile.in so that it is passed to AM_LDFLAGS. PR lto/106118 lto-plugin/ChangeLog: * configure.ac: Move -pthread from here... * Makefile.am: ...to here. * configure: Regenerate. * Makefile.in: Likewise.
2022-06-27lto-plugin: make claim_file_handler thread-safeMartin Liska1-0/+7
lto-plugin/ChangeLog: * lto-plugin.c (plugin_lock): New lock. (claim_file_handler): Use mutex for critical section. (onload): Initialize mutex. * configure.ac: Check for pthread.h. * configure: Regenerate. * config.h.in: Regenerate.
2022-03-22lto-plugin: Use GNU ld or Solaris ld version script in preference to ↵Jakub Jelinek1-0/+37
-export-symbols-regex [PR102426] As reported, libtool -export-symbols-regex doesn't work on Solaris when using GNU ld instead of Sun ld, libtool just always assumes Sun ld. As I'm unsure what is the maintainance status of libtool right now, this patch solves it on the lto-plugin side instead, tests at configure time similar way how libssp and other target libraries test for symbol versioning (except omitting the symbol version because we just want one GLOBAL symbol and rest of them LOCAL), and will use the current way of -export-symbols-regex onload as fallback when this doesn't work. 2022-03-22 Jakub Jelinek <jakub@redhat.com> PR lto/102426 lto-plugin/ * configure.ac (LTO_PLUGIN_USE_SYMVER, LTO_PLUGIN_USE_SYMVER_GNU, LTO_PLUGIN_USE_SYMVER_SUN): New test for symbol versioning support. * Makefile.am (version_arg, version_dep): Set conditionally based on LTO_PLUGIN_USE_SYMVER*. (liblto_plugin_la_LDFLAGS): Use $(version_arg) instead of -export-symbols-regex onload. (liblto_plugin_la_DEPENDENCIES): Depend on $(version_dep). * lto-plugin.map: New file. * configure: Regenerated. * Makefile.in: Regenerated.
2020-04-25Enable Intel CET in liblto_plugin.so on Intel CET enabled hostH.J. Lu1-0/+3
Since ld is Intel CET enabled on Intel CET enabled host, dlopen fails on liblto_plugin.so if it isn't Intel CET enabled. Add GCC_CET_HOST_FLAGS to cet.m4, use it in libiberty and lto-plugin to always enable Intel CET in liblto_plugin.so on Intel CET enabled host. On Linux/x86 host, enable Intel CET by default if assembler and compiler support Intel CET so that the generated liblto_plugin.so can be used on both CET and non-CET machines. It is an error to disable Intel CET in liblto_plugin.so on Intel CET enabled host. config/ PR bootstrap/94739 * cet.m4 (GCC_CET_HOST_FLAGS): New. libiberty/ PR bootstrap/94739 * Makefile.in (COMPILE.c): Add @CET_HOST_FLAGS@. (configure_deps): Add $(srcdir)/../config/cet.m4 and $(srcdir)/../config/enable.m4. * aclocal.m4: Include ../config/cet.m4 and ../config/enable.m4. * configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and AC_SUBST(CET_HOST_FLAGS). * configure: Regenerated. lto-plugin/ PR bootstrap/94739 * Makefile.am (AM_CFLAGS): Add $(CET_HOST_FLAGS). * configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and AC_SUBST(CET_HOST_FLAGS). * Makefile.in: Regenerated. * aclocal.m4: Likewise. * configure: Likewise.
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers1-3/+2
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
2017-01-17re PR other/79046 (g++ -print-file-name=plugin uses full version number in path)Jakub Jelinek1-0/+3
PR other/79046 * configure: Regenerated. config/ * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. gcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. (CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s). (gcc.o): Depend on $(BASEVER). * common.opt (dumpfullversion): New option. * gcc.c (driver_handle_option): Handle OPT_dumpfullversion. * doc/invoke.texi: Document -dumpfullversion. * doc/install.texi: Document --with-gcc-major-version-only. * configure: Regenerated. libatomic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgomp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libssp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. liboffloadmic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libquadmath/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libmpx/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libada/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. lto-plugin/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libitm/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. fixincludes/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libcilkrts/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libcc1/ * configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only use just major number from BASE-VER. * configure: Regenerated. * Makefile.in: Regenerated. libobjc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libstdc++-v3/ * configure.ac: Add GCC_BASE_VER. * fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * po/Makefile.in: Regenerated. * libsupc++/Makefile.in: Regenerated. * testsuite/Makefile.in: Regenerated. * src/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * include/Makefile.in: Regenerated. * doc/Makefile.in: Regenerated. * python/Makefile.in: Regenerated. * src/c++11/Makefile.in: Regenerated. * src/c++98/Makefile.in: Regenerated. * src/filesystem/Makefile.in: Regenerated. libvtv/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libsanitizer/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * libbacktrace/Makefile.in: Regenerated. * interception/Makefile.in: Regenerated. * asan/Makefile.in: Regenerated. * ubsan/Makefile.in: Regenerated. * configure: Regenerated. * sanitizer_common/Makefile.in: Regenerated. * lsan/Makefile.in: Regenerated. * Makefile.in: Regenerated. * tsan/Makefile.in: Regenerated. libgfortran/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r244521
2015-07-02configure.ac: Add AC_USE_SYSTEM_EXTENSIONS.Uros Bizjak1-0/+1
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS. * configure: Regenerate. * config.h.in: Ditto. From-SVN: r225302
2014-11-13[PATCH 1/7] OpenMP 4.0 offloading infrastructure: configure and makeBernd Schmidt1-0/+10
* configure: Regenerate. * configure.ac (--enable-as-accelerator-for) (--enable-offload-targets): New configure options. gcc/ * Makefile.in (real_target_noncanonical, accel_dir_suffix) (enable_as_accelerator): New variables substituted by configure. (libsubdir, libexecsubdir, unlibsubdir): Tweak for the possibility of being configured as an offload compiler. (DRIVER_DEFINES): Pass new defines DEFAULT_REAL_TARGET_MACHINE and ACCEL_DIR_SUFFIX. (install-cpp, install-common, install_driver, install-gcc-ar): Do not install for the offload compiler. * config.in: Regenerate. * configure: Regenerate. * configure.ac (real_target_noncanonical, accel_dir_suffix) (enable_as_accelerator): Compute new variables. (ACCEL_COMPILER): Define if the compiler is built as the accel compiler. (OFFLOAD_TARGETS): List of target names suitable for offloading. (ENABLE_OFFLOADING): Define if list of offload targets is not empty. gcc/cp/ * Make-lang.in (c++.install-common): Do not install for the offload compiler. gcc/doc/ * install.texi (Options specification): Document --enable-as-accelerator-for and --enable-offload-targets. gcc/fortran/ * Make-lang.in (fortran.install-common): Do not install for the offload compiler. libgcc/ * Makefile.in (crtoffloadbegin$(objext)): New rule. (crtoffloadend$(objext)): Likewise. * configure: Regenerate. * configure.ac (accel_dir_suffix): Compute new variable. (extra_parts): Add crtoffloadbegin.o and crtoffloadend.o if enable_offload_targets is not empty. * offloadstuff.c: New file. libgomp/ * config.h.in: Regenerate. * configure: Regenerate. * configure.ac: Check for libdl, required for plugin support. (PLUGIN_SUPPORT): Define if plugins are supported. (enable_offload_targets): Support Intel MIC targets. (OFFLOAD_TARGETS): List of target names suitable for offloading. lto-plugin/ * Makefile.am (libexecsubdir): Tweak for the possibility of being configured for offload compiler. (accel_dir_suffix, real_target_noncanonical): New variables substituted by configure. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac (accel_dir_suffix, real_target_noncanonical): Compute new variables. Co-Authored-By: Andrey Turetskiy <andrey.turetskiy@intel.com> Co-Authored-By: Ilya Verbin <ilya.verbin@intel.com> Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com> From-SVN: r217485
2014-08-26Properly set gcc_build_dir for in-tree buildH.J. Lu1-0/+7
PR bootstrap/62260 * Makefile.am (gcc_build_dir): Set to @gcc_build_dir@. * configure.ac (gcc_build_dir): Set and AC_SUBST according to $host_subdir. * Makefile.in: Regenerated. * configure: Likewise. From-SVN: r214524
2014-06-13Allow overriding the libiberty used for building the LTO plugin.Thomas Schwinge1-0/+5
lto-plugin/ * configure.ac (--with-libiberty): New configure option. * configure: Regenerate. * Makefile.am (libiberty, libiberty_noasan, libiberty_pic): New variables. (liblto_plugin_la_LIBADD, liblto_plugin_la_LDFLAGS) (liblto_plugin_la_DEPENDENCIES): Use them. * Makefile.in: Regenerate. From-SVN: r211642
2014-05-15Check for -static-libgcc before use (PR lto/60981)Rainer Orth1-1/+13
PR lto/60981 * configure.ac: Check for -static-libgcc. * configure: Regenerate. From-SVN: r210465
2014-03-17Fix Solaris bootstrap with GNU ld/LTORainer Orth1-0/+3
* configure.ac (ac_lto_plugin_ldflags): Set to -Wc,-static-libgcc for gcc. * configure: Regenerate. * Makefile.am (AM_LDFLAGS): New variable. (liblto_plugin_la_LDFLAGS): Add it. * Makefile.in: Regenerate. From-SVN: r208614
2011-08-10re PR bootstrap/49907 (lto-plugin -Wall in stage1)Richard Guenther1-0/+1
2011-08-10 Richard Guenther <rguenther@suse.de> PR bootstrap/49907 lto-plugin/ * configure.ac: Use ACX_PROG_CC_WARNING_OPTS to detect -Wall presence. * Makefile.am (AM_CFLAGS): Adjust. Do not build with -Werror. * configure: Regenerate. * Makefile.in: Likewise. * aclocal.m4: Likewise. From-SVN: r177614
2010-12-10re PR middle-end/46674 (Weak alias is mistakenly optimized away)Dave Korn1-12/+0
gcc/ChangeLog: PR middle-end/46674 PR lto/43157 * target.def (mangle_assembler_name): New target asm_out hook. * targhooks.c (default_mangle_assembler_name): Add default hook implementation. * targhooks.h (default_mangle_assembler_name): Add prototype. * lto-symtab.c (lto_symtab_register_decl): Use new hook when processing DECL_ASSEMBLER_NAMEs for lto symtabs. (lto_symtab_get_resolution): Likewise. (lto_cgraph_replace_node): Likewise. (lto_symtab_prevailing_decl): Likewise. * lto-streamer-out.c (write_symbol): Likewise. * doc/tm.texi.in (TARGET_MANGLE_ASSEMBLER_NAME): Add @hook directive. * doc/tm.texi: Regenerate. * config/i386/cygming.h (TARGET_MANGLE_ASSEMBLER_NAME): Define to point at i386_pe_mangle_assembler_name. * config/i386/winnt.c (i386_pe_mangle_assembler_name): New function. * config/i386/i386-protos.h (i386_pe_mangle_assembler_name): Add prototype. lto-plugin/ChangeLog: PR middle-end/46674 PR lto/43157 * configure.ac (SYM_STYLE): Don't AC_DEFINE. * lto-plugin.c (sym_style): Don't use it; default to ss_none. * configure: Regenerate. * config.h.in: Likewise. gcc/testsuite/ChangeLog: PR middle-end/46674 PR lto/43157 * gcc.dg/pr43157.c: New file. From-SVN: r167688
2010-12-06re PR target/40125 (libgcc_s DLL installed in wrong directory in cross ↵Dave Korn1-0/+1
toolchain) config/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * lthostflags.m4: New file. (ACX_LT_HOST_FLAGS): Define. libgfortran/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (LTLDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. libgomp/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (libgomp_la_LDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libjava/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * configure.host (libgcj_sublib_ltflags): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * gcj/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac (extra_ldflags_libobjc): Invoke ACX_LT_HOST_FLAGS. * Makefile.in (lt_host_flags): Import AC_SUBST'd value. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (libquadmath_la_LDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. libssp/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (libssp_la_LDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. libstdc++-v3/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * configure.host (OPT_LDFLAGS): Use lt_host_flags for cygming. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. lto-plugin/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (liblto_plugin_la_LDFLAGS): Use lt_host_flags but override -bindir setting. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. From-SVN: r167480
2010-12-05config.h.in: Regenerated.Kai Tietz1-1/+1
2010-12-05 Kai Tietz <kai.tietz@onevision.com> * config.h.in: Regenerated. * configure: Regenerated. * configure.ac (AC_CHECK_HEADERS): Replaced by AC_HEADER_SYS_WAIT. * lto-plugin.c (WIFEXITED): Define default. (WEXITSTATUS): Likeiwse. From-SVN: r167468
2010-12-01config.h.in: Regenerated.Kai Tietz1-0/+1
2010-12-01 Kai Tietz <kai.tietz@onevision.com> * config.h.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * configure.ac (AC_CHECK_HEADERS): Check for sys/wait.h. * lto-plugin.c: Include sys/wait.h conditionally. * aclocal.m4: Regenerated. From-SVN: r167343
2010-11-11re PR bootstrap/46397 (lto-plugin.c does not build on Solaris 10/SPARC)Dave Korn1-0/+1
PR bootstrap/46397 PR bootstrap/46362 * configure.ac: Add AC_TYPE_INT64_T test. * config.h.in: Regenerate. * configure: Likewise. * lto-plugin.c (debug): Use char not bool. (nop): Likewise. (check_1): Rename from check, and use int not bool for gate argument. (check): Macro wrapper for the above to coerce gate argument into boolean-valued integer in case it has pointer type. (parse_table_entry): Use 0 not false. (claim_file_handler): Avoid use of PRIx64 by splitting 64-bit size into two 32-bit parts and printing as hex ints. From-SVN: r166601
2010-11-03re PR lto/46273 (Failed to bootstrap)Dave Korn1-9/+12
ChangeLog: 2010-11-03 Ian Lance Taylor <iant@google.com> Dave Korn <dave.korn.cygwin@gmail.com> PR lto/46273 * configure.ac: Remove libelf tests. Build lto-plugin on ELF always and on other supported platforms whenever LTO is enabled. * configure: Rebuild. gcc/ChangeLog: 2010-11-03 Ian Lance Taylor <iant@google.com> PR lto/46273 * gcc/config.gcc: Don't set lto_binary_reader. * doc/install.texi (Prerequisites): Remove libelf paragraphs. (Configuration): Mention --disable-lto. Remove --with-libelf paragraph. lto-plugin/ChangeLog: 2010-11-03 Dave Korn <dave.korn.cygwin@gmail.com> PR lto/46273 * lto-plugin.h: Delete. * lto-plugin-elf.c: Likewise. * lto-plugin-coff.c: Likewise. * configure.ac: Don't use libelf, don't source config.gcc. (LIBELFLIBS): Delete. (LIBELFINC): Delete. (LTO_FORMAT): Delete. (SYM_STYLE): Add AC_DEFINE var, set based on $target. (config.h): Add AC_CONFIG_HEADERS directive. * Makefile.am (LIBELFLIBS): Delete. (LIBELFINC): Delete. (LTO_FORMAT): Delete. (DEFS): Import. (AM_CPPFLAGS): Use it. Don't use LIBELFINC. (liblto_plugin_la_SOURCES): Don't use LTO_FORMAT, don't include any object-format-specific source file in the link. (liblto_plugin_la_LIBADD): Don't use LIBELFLIBS. * config.h.in: Generate. * configure: Regenerate. * Makefile.in: Likewise. * lto-plugin.c (O_BINARY): Definition moved here from lto-plugin.h. (LTO_SEGMENT_NAME): New definition. (LTO_SECTION_PREFIX): Definition moved here from lto-plugin.h. (LTO_SECTION_PREFIX_LEN): New definition. (struct sym_aux): Struct definition moved here from lto-plugin.h. (struct plugin_symtab): Likewise. (struct plugin_objfile): Likewise. (struct plugin_objfile): New struct def. (enum symbol_style): New enum type. (add_symbols): Make static. (claimed_files): Likewise. (num_claimed_files): Likewise. (sym_style): New global. (check): Make static. (parse_table_entry): Likewise. Respect sym_style when extracting symbol from symtab entry. (translate): Make static. (resolve_conflicts): Likewise. (process_symtab): New function, per-section callback version of old object-format-specific handling from deleted lto-plugin-elf.c. (claim_file_handler): Convert ELF-specific version from deleted lto-plugin-elf.c to simple_object interface and move here. (process_options): Allow new '-sym-style=' option. (onload): Don't call deleted onload_format_checks hook. From-SVN: r166233
2010-10-08Add AC_CANONICAL_SYSTEM to configure.ac.H.J. Lu1-0/+1
2010-10-08 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/45951 * configure.ac: Add AC_CANONICAL_SYSTEM. * configure: Regenerated. From-SVN: r165214
2010-10-07configure.ac (build_lto_plugin): New shell variable.Dave Korn1-0/+8
ChangeLog: 2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com> * configure.ac (build_lto_plugin): New shell variable. (--enable-lto): Turn on by default for all non-ELF platforms that have had LTO support added so far. Set build_lto_plugin appropriately for both ELF and non-ELF. (configdirs): Add lto-plugin or not based on build_lto_plugin. * configure: Regenerate. gcc/ChangeLog: 2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com> * config.host (host_lto_plugin_soname): New shell variable. * configure.ac (LTOPLUGINSONAME): Add an AC_DEFINE for the above. * config.in: Regenerate. * configure: Regenerate. * gcc.c (main): Use LTOPLUGINSONAME instead of hard-coding name of LTO plugin shared library. lto-plugin/ChangeLog: 2010-10-07 Dave Korn <dave.korn.cygwin@gmail.com> * configure.ac: Source config.gcc to determine lto_binary_reader. (LTO_FORMAT): New AC_SUBST variable inferred from lto_binary_reader. * Makefile.am (LTO_FORMAT): Import. (liblto_plugin_la_SOURCES): Add object format dependent module defined by LTO_FORMAT. (liblto_plugin_la_LIBADD): Allow for both PIC and non-PIC libiberty, and work around libtool warning. * configure: Regenerate. * Makefile.in: Likewise. * lto-plugin.c (struct sym_aux): Move to new lto-plugin.h. (struct sym_aux): Likewise. (struct plugin_symtab): Likewise. (struct plugin_file_info): Likewise. (LTO_SECTION_PREFIX): Likewise. (add_symbols): Make non-static. (claimed_files): Likewise. (num_claimed_files): Likewise. (check): Likewise. (parse_table_entry): Likewise. (translate): Likewise. (resolve_conflicts): Likewise. (process_symtab): Move to new lto-plugin-elf.c object format dependent source file. (claim_file_handler): Likewise, and make non-static. (onload): Call new onload_format_checks function. * lto-plugin.h: New file. (LTO_SECTION_PREFIX): Move here. (struct sym_aux): Likewise. (struct plugin_symtab): Likewise. (struct plugin_file_info): Likewise. (claim_file_handler): Add new function prototype. (onload_format_checks): Likewise. (check): Declare extern. (translate): Likewise. (parse_table_entry): Likewise. (resolve_conflicts): Likewise. (add_symbols): Likewise. (claimed_files): Likewise. (num_claimed_files): Likewise. * lto-plugin-elf.c (process_symtab): Move here. (claim_file_handler): Likewise, and make non-static. (onload_format_checks): New function factored out from onload. * lto-plugin-coff.c (claim_file_handler): New function stub. (onload_format_checks): Likewise. From-SVN: r165133
2010-05-04no-dist in non-imported automake dirs.Ralf Wildenhues1-1/+1
libgfortran/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * configure: Regenerate. * Makefile.in: Regenerate. libgomp/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * configure: Regenerate. * Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libjava/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * Makefile.in: Regenerate. * gcj/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libjava/libltdl/: PR other/43620 * Makefile.am (AUTOMAKE_OPTIONS): Add no-dist. * Makefile.in: Regenerate. libmudflap/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libssp/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * Makefile.in: Regenerate. libstdc++-v3/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. lto-plugin/: PR other/43620 * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * Makefile.in: Regenerate. From-SVN: r159041
2009-10-27re PR lto/41652 (LTO plugin misconfiguration)Dmitry Gorbachev1-1/+1
2009-10-27 Dmitry Gorbachev <d.g.gorbachev@gmail.com> PR lto/41652 * configure.ac: Call AC_SYS_LARGEFILE before AC_OUTPUT. * configure: Regenerate. From-SVN: r153610
2009-10-26configure.ac: Use AM_MAINTAINER_MODE.Richard Guenther1-0/+1
2009-10-26 Richard Guenther <rguenther@suse.de> * configure.ac: Use AM_MAINTAINER_MODE. * acinclude.m4: Remove. * configure: Re-generate. * Makefile.in: Likewise. * aclocal.m4: Likewise. From-SVN: r153556
2009-10-19re PR lto/40790 (plugin-api.h unconditionally includes stdint.h)Rafael Espindola1-0/+1
include/ 2009-10-09 Rafael Avila de Espindola <espindola@google.com> PR40790 * plugin-api.h: Don't include stdint.h unconditionally. lto-plugin/ 2009-10-09 Rafael Avila de Espindola <espindola@google.com> PR40790 * configure: Regenerate. * configure.ac: Add AC_TYPE_UINT64_T. From-SVN: r152976
2009-10-03Merge lto branch into trunk.Diego Novillo1-0/+12
From-SVN: r152434
generated by cgit v1.1 at 2024-11-03 10:54:45 +0000