aboutsummaryrefslogtreecommitdiff
path: root/lto-plugin
AgeCommit message (Collapse)AuthorFilesLines
2024-08-24Daily bump.GCC Administrator1-0/+6
2024-08-23lto: Don't check obj.found for offload sectionH.J. Lu1-1/+1
obj.found is the number of LTO symbols. We should include the offload section when it is used by linker even if there are no LTO symbols. PR lto/116361 * lto-plugin.c (claim_file_handler_v2): Don't check obj.found for the offload section. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2024-08-23Daily bump.GCC Administrator1-0/+7
2024-08-22Update LDPT_REGISTER_CLAIM_FILE_HOOK_V2 linker plugin hookH.J. Lu1-22/+31
This hook allows the BFD linker plugin to distinguish calls to claim_file_handler that know the object is being used by the linker (from ldmain.c:add_archive_element), from calls that don't know it's being used by the linker (from elf_link_is_defined_archive_symbol); in the latter case, the plugin should avoid including the unused LTO archive members in link output. To get the proper support for archives with LTO common symbols, the linker fix commit a6f8fe0a9e9cbe871652e46ba7c22d5e9fb86208 Author: H.J. Lu <hjl.tools@gmail.com> Date: Wed Aug 14 20:50:02 2024 -0700 lto: Don't include unused LTO archive members in output is required. PR lto/116361 * lto-plugin.c (claim_file_handler_v2): Rename claimed to can_be_claimed. Include the LTO object only if it is known to be included in link output. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2024-01-03Update copyright years.Jakub Jelinek1-1/+1
2023-10-23Daily bump.GCC Administrator1-0/+5
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe2-5/+71
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-08-08Daily bump.GCC Administrator1-0/+24
2023-08-07libtool.m4: augment symcode for Solaris 11Nick Alcock1-1/+1
This reports common symbols like GNU nm, via a type code of 'C'. ChangeLog: * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for Solaris 11. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Add support for the haiku operating systemAlexander von Gluck IV1-1/+1
These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. ChangeLog: * configure: Regenerate. * configure.ac: Add Haiku to list of ELF OSes * libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix the NM="/nm/over/here -B/option/with/path" caseNick Alcock1-7/+13
My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. ChangeLog: * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix nm BSD flag detectionNick Alcock1-44/+45
Libtool needs to get BSD-format (or MS-format) output out of the system nm, so that it can scan generated object files for symbol names for -export-symbols-regex support. Some nms need specific flags to turn on BSD-formatted output, so libtool checks for this in its AC_PATH_NM. Unfortunately the code to do this has a pair of interlocking flaws: - it runs the test by doing an nm of /dev/null. Some platforms reasonably refuse to do an nm on a device file, but before now this has only been worked around by assuming that the error message has a specific textual form emitted by Tru64 nm, and that getting this error means this is Tru64 nm and that nm -B would work to produce BSD-format output, even though the test never actually got anything but an error message out of nm -B. This is fixable by nm'ing *nm itself* (since we necessarily have a path to it). - the test is entirely skipped if NM is set in the environment, on the grounds that the user has overridden the test: but the user cannot reasonably be expected to know that libtool wants not only nm but also flags forcing BSD-format output. Worse yet, one such "user" is the top-level Cygnus configure script, which neither tests for nor specifies any BSD-format flags. So platforms needing BSD-format flags always fail to set them when run in a Cygnus tree, breaking -export-symbols-regex on such platforms. Libtool also needs to augment $LD on some platforms, but this is done unconditionally, augmenting whatever the user specified: the nm check should do the same. One wrinkle: if the user has overridden $NM, a path might have been provided: so we use the user-specified path if there was one, and otherwise do the path search as usual. (If the nm specified doesn't work, this might lead to a few extra pointless path searches -- but the test is going to fail anyway, so that's not a problem.) (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where *that* is a symlink to /usr/bin/nm.) ChangeLog: * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided NM, if there is one. Run nm on itself, not on /dev/null, to avoid errors from nms that refuse to work on non-regular files. Remove other workarounds for this problem. Strip out blank lines from the nm output. fixincludes/ChangeLog: * configure: Regenerate. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07GCC: Check if AR works with --plugin and rcH.J. Lu1-3/+11
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. ChangeLog: * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-2/+25
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ChangeLog: * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ChangeLog: * configure: Regenerated. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate.
2023-07-01Daily bump.GCC Administrator1-0/+4
2023-06-30Regenrate lto-plugin/Makefile.inMartin Jambor1-0/+1
Commit regenerated lto-plugin/Makefile.in in order to reflect changes introduction of --enable-host-pie. lto-plugin/ChangeLog: 2023-06-30 Martin Jambor <mjambor@suse.cz> * Makefile.in: Regenerate.
2023-06-23Daily bump.GCC Administrator1-0/+6
2023-06-22configure: Implement --enable-host-bind-nowMarek Polacek2-2/+29
As promised in the --enable-host-pie patch, this patch adds another configure option, --enable-host-bind-now, which adds -z now when linking the compiler executables in order to extend hardening. BIND_NOW with RELRO allows the GOT to be marked RO; this prevents GOT modification attacks. This option does not affect linking of target libraries; you can use LDFLAGS_FOR_TARGET=-Wl,-z,relro,-z,now to enable RELRO/BIND_NOW. With this patch: $ readelf -Wd cc1{,plus,obj,gm2} f951 lto1 cpp rust1 gnat1 | grep FLAGS 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE 0x000000000000001e (FLAGS) BIND_NOW 0x000000006ffffffb (FLAGS_1) Flags: NOW PIE c++tools/ChangeLog: * configure.ac (--enable-host-bind-now): New check. * configure: Regenerate. gcc/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Add -Wl,-z,now to LD_PICFLAG if --enable-host-bind-now. * configure: Regenerate. * doc/install.texi: Document --enable-host-bind-now. lto-plugin/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Link with -z,now. * configure: Regenerate.
2023-05-12Daily bump.GCC Administrator1-0/+8
2023-05-11Implement LDPT_REGISTER_CLAIM_FILE_HOOK_V2 linker plugin hook [PR109128]Joseph Myers1-3/+28
This is one part of the fix for PR109128, along with a corresponding binutils's linker change. Without this patch, what happens in the linker, when an unused object in a .a file has offload data, is that elf_link_is_defined_archive_symbol calls bfd_link_plugin_object_p, which ends up calling the plugin's claim_file_handler, which then records the object as one with offload data. That is, the linker never decides to use the object in the first place, but use of this _p interface (called as part of trying to decide whether to use the object) results in the plugin deciding to use its offload data (and a consequent mismatch in the offload data present at runtime). The new hook allows the linker plugin to distinguish calls to claim_file_handler that know the object is being used by the linker (from ldmain.c:add_archive_element), from calls that don't know it's being used by the linker (from elf_link_is_defined_archive_symbol); in the latter case, the plugin should avoid recording the object as one with offload data. PR middle-end/109128 include/ * plugin-api.h (ld_plugin_claim_file_handler_v2) (ld_plugin_register_claim_file_v2) (LDPT_REGISTER_CLAIM_FILE_HOOK_V2): New. (struct ld_plugin_tv): Add tv_register_claim_file_v2. lto-plugin/ * lto-plugin.c (register_claim_file_v2): New. (claim_file_handler_v2): New. (claim_file_handler): Wrap claim_file_handler_v2. (onload): Handle LDPT_REGISTER_CLAIM_FILE_HOOK_V2.
2023-01-16Update copyright years.Jakub Jelinek1-1/+1
2022-11-24Daily bump.GCC Administrator1-0/+15
2022-11-22Revert "configure: Implement --enable-host-bind-now"Marek Polacek2-29/+2
This reverts commit 258d7149f92f19380c9f7763618d62408c064e60.
2022-11-22configure: Implement --enable-host-bind-nowMarek Polacek2-2/+29
As promised in the --enable-host-pie patch, this patch adds another configure option, --enable-host-bind-now, which adds -z now when linking the compiler executables in order to extend hardening. BIND_NOW with RELRO allows the GOT to be marked RO; this prevents GOT modification attacks. This option does not affect linking of target libraries; you can use LDFLAGS_FOR_TARGET=-Wl,-z,relro,-z,now to enable RELRO/BIND_NOW. c++tools/ChangeLog: * configure.ac (--enable-host-bind-now): New check. * configure: Regenerate. gcc/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Add -Wl,-z,now to LD_PICFLAG if --enable-host-bind-now. * configure: Regenerate. * doc/install.texi: Document --enable-host-bind-now. lto-plugin/ChangeLog: * configure.ac (--enable-host-bind-now): New check. Link with -z,now. * configure: Regenerate.
2022-10-13Daily bump.GCC Administrator1-0/+4
2022-10-12regenerate configure filesMartin Liska1-2/+2
Needed after a recent change. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2022-10-12Daily bump.GCC Administrator1-0/+5
2022-10-11Generic configury support for shared libs on VxWorksOlivier Hainque1-0/+24
This change adds the configury bits to activate the build of shared libs on VxWorks ports configured with --enable-shared, for libraries variants where this is generally supported (rtp, code model !large - currently not compatible with -fPIC). Set lt_cv_deplibs_check_method in libtool.m4, so the build of libraries know how to establish dependencies. This is useful in configurations such as aarch64 where proper support of LSE relies on accurate dependency information between libstdc++ and libgcc_s to begin with. Regenerate configure scripts to reflect libtool.m4 change. 2022-10-09 Olivier Hainque <hainque@adacore.com> * libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker and friends for rtp !large. Assume the linker has the required abilities and set lt_cv_deplibs_check_method. gcc/ * config.gcc (*vxworks*): Add t-slibgcc fragment if enable_shared. libgcc/ * config.host (*vxworks*): When enable_shared, add libgcc and crtstuff "shared" fragments for rtp except large code model. (aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from the list of fragments. 2022-10-09 Olivier Hainque <hainque@adacore.com> gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. liboffloadmic/ * plugin/configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate.
2022-08-02Daily bump.GCC Administrator1-0/+6
2022-08-01lto: replace $target with $host in configure.ac [PR106170]Martin Liska2-2/+2
PR lto/106170 lto-plugin/ChangeLog: * configure.ac: Replace $target with $host. * configure: Regenerate.
2022-07-15Daily bump.GCC Administrator1-0/+8
2022-07-14lto-plugin: use -pthread only for detected targetsMartin Liska4-6/+16
Use -pthread only if we are going to use pthread functionality. PR bootstrap/106156 lto-plugin/ChangeLog: * Makefile.am: Use ac_lto_plugin_extra_ldflags for AM_LDFLAGS. * configure.ac: Use AC_SUBST(ac_lto_plugin_extra_ldflags). * Makefile.in: Regenerate. * configure: Regenerate.
2022-07-13Daily bump.GCC Administrator1-0/+7
2022-07-12lto-plugin: implement LDPT_GET_API_VERSIONMartin Liska3-2/+49
include/ChangeLog: * plugin-api.h (enum linker_api_version): New enum. (ld_plugin_get_api_version): New. (enum ld_plugin_tag): Add LDPT_GET_API_VERSION. (struct ld_plugin_tv): Add tv_get_api_version. lto-plugin/ChangeLog: * lto-plugin.c (negotiate_api_version): New. (onload): Negotiate API version. * Makefile.am: Add -DBASE_VERSION. * Makefile.in: Regenerate.
2022-07-08Daily bump.GCC Administrator1-0/+11
2022-07-07lto-plugin: use locking only for selected targetsMartin Liska4-18/+53
For now, support locking only for linux targets that are different from riscv* where the target depends on libatomic (and fails during bootstrap). PR lto/106170 lto-plugin/ChangeLog: * configure.ac: Configure HAVE_PTHREAD_LOCKING. * lto-plugin.c (LOCK_SECTION): New. (UNLOCK_SECTION): New. (claim_file_handler): Use the newly added macros. (onload): Likewise. * config.h.in: Regenerate. * configure: Regenerate.
2022-07-02Daily bump.GCC Administrator1-0/+8
2022-07-01lto: pass -pthread to AM_LDFLAGS [PR 106118]Pekka Seppänen4-10/+6
Move -pthread from configure.ac to Makefile.in so that it is passed to AM_LDFLAGS. PR lto/106118 lto-plugin/ChangeLog: * configure.ac: Move -pthread from here... * Makefile.am: ...to here. * configure: Regenerate. * Makefile.in: Likewise.
2022-06-28Daily bump.GCC Administrator1-0/+9
2022-06-27lto-plugin: make claim_file_handler thread-safeMartin Liska4-2/+45
lto-plugin/ChangeLog: * lto-plugin.c (plugin_lock): New lock. (claim_file_handler): Use mutex for critical section. (onload): Initialize mutex. * configure.ac: Check for pthread.h. * configure: Regenerate. * config.h.in: Regenerate.
2022-06-21Daily bump.GCC Administrator1-0/+7
2022-06-20lto-plugin: support LDPT_GET_SYMBOLS_V3Martin Liska1-7/+35
That supports skipping of an object file (LDPS_NO_SYMS). lto-plugin/ChangeLog: * lto-plugin.c (struct plugin_file_info): Add skip_file flag. (write_resolution): Write resolution only if get_symbols != LDPS_NO_SYMS. (all_symbols_read_handler): Ignore file if skip_file is true. (onload): Handle LDPT_GET_SYMBOLS_V3.
2022-05-05Daily bump.GCC Administrator1-0/+9
2022-05-04LTO plugin: modernize a bit.Martin Liska1-9/+10
include/ChangeLog: * plugin-api.h (enum ld_plugin_tag): Do not set implicit enum values. lto-plugin/ChangeLog: * lto-plugin.c (struct plugin_objfile): Use bool for offset field. (exec_lto_wrapper): Assign true/false to bool variables. (process_offload_section): Likewise. (claim_file_handler): Likewise. (onload): Likewise.
2022-03-23Daily bump.GCC Administrator1-0/+14
2022-03-22lto-plugin: Use GNU ld or Solaris ld version script in preference to ↵Jakub Jelinek5-8/+179
-export-symbols-regex [PR102426] As reported, libtool -export-symbols-regex doesn't work on Solaris when using GNU ld instead of Sun ld, libtool just always assumes Sun ld. As I'm unsure what is the maintainance status of libtool right now, this patch solves it on the lto-plugin side instead, tests at configure time similar way how libssp and other target libraries test for symbol versioning (except omitting the symbol version because we just want one GLOBAL symbol and rest of them LOCAL), and will use the current way of -export-symbols-regex onload as fallback when this doesn't work. 2022-03-22 Jakub Jelinek <jakub@redhat.com> PR lto/102426 lto-plugin/ * configure.ac (LTO_PLUGIN_USE_SYMVER, LTO_PLUGIN_USE_SYMVER_GNU, LTO_PLUGIN_USE_SYMVER_SUN): New test for symbol versioning support. * Makefile.am (version_arg, version_dep): Set conditionally based on LTO_PLUGIN_USE_SYMVER*. (liblto_plugin_la_LDFLAGS): Use $(version_arg) instead of -export-symbols-regex onload. (liblto_plugin_la_DEPENDENCIES): Depend on $(version_dep). * lto-plugin.map: New file. * configure: Regenerated. * Makefile.in: Regenerated.
2022-03-12Daily bump.GCC Administrator1-0/+5
2022-03-11lto-plugin: Honor link_output_name for -foffload-objects file nameTobias Burnus1-1/+8
lto-plugin/ChangeLog: * lto-plugin.c (all_symbols_read_handler): With -save-temps, use link_output_name for -foffload-objects's file name, if available.
2022-03-02Daily bump.GCC Administrator1-0/+6
2022-03-01lto-plugin: update comments - remove hardwired goldMartin Liska1-7/+7
lto-plugin/ChangeLog: * lto-plugin.c (process_offload_section): Use a linker as many comments are connected to gold linker. (process_option): Likewise.
generated by cgit v1.1 at 2024-09-28 04:00:04 +0000