| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Having looked at the dlmopen support in GDB, it occurred to me that
the current MI =library-unloaded event doesn't incude enough
information to be useful.
Consider the gdb.mi/mi-dlmopen.exp test, this test loads libraries
into multiple linker namespaces, and then unloads these libraries.
We should probably figure out a way to include the linker namepsace ID
in GDB's output, e.g. in the =library-loaded and =library-unloaded MI
events, and in the output of 'info sharedlibrary'. But this commit is
not about doing that.
This commit includes the 'ranges' information in the =library-unloaded
event output. This is the same ranges information as is included in
the =library-loaded output. Even without the linker namespace ID,
this should allow MI consumers to figure out which library instance is
being unloaded.
Here is the 'info sharedlibrary' output for mi-dlmopen.exp at the
point where all the shared libraries are loaded:
info sharedlibrary
&"info sharedlibrary\n"
~"From To Syms Read Shared Object Library\n"
~"0x00007ffff7fca000 0x00007ffff7ff03f5 Yes /lib64/ld-linux-x86-64.so.2\n"
~"0x00007ffff7eda3d0 0x00007ffff7f4e898 Yes /lib64/libm.so.6\n"
~"0x00007ffff7d0e800 0x00007ffff7e6dccd Yes /lib64/libc.so.6\n"
~"0x00007ffff7fbd040 0x00007ffff7fbd116 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so\n"
~"0x00007ffff7fb8040 0x00007ffff7fb80f9 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib-dep.so\n"
~"0x00007ffff7bfe3d0 0x00007ffff7c72898 Yes /lib64/libm.so.6\n"
~"0x00007ffff7a32800 0x00007ffff7b91ccd Yes /lib64/libc.so.6\n"
~"0x00007ffff7fca000 0x00007ffff7ff03f5 Yes /lib64/ld-linux-x86-64.so.2\n"
~"0x00007ffff7fb3040 0x00007ffff7fb3116 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so\n"
~"0x00007ffff7fae040 0x00007ffff7fae0f9 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib-dep.so\n"
~"0x00007ffff7ce1040 0x00007ffff7ce1116 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so\n"
~"0x00007ffff7cdc040 0x00007ffff7cdc0f9 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib-dep.so\n"
~"0x00007ffff79253d0 0x00007ffff7999898 Yes /lib64/libm.so.6\n"
~"0x00007ffff7759800 0x00007ffff78b8ccd Yes /lib64/libc.so.6\n"
~"0x00007ffff7fca000 0x00007ffff7ff03f5 Yes /lib64/ld-linux-x86-64.so.2\n"
~"0x00007ffff7cd7040 0x00007ffff7cd7116 Yes /tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.2.so\n"
^done
(gdb)
Notice that dlmopen-lib.1.so is loaded multiple times. Here is the
=library-unloaded event when one copy of this library is unloaded
before this patch:
=library-unloaded,id="/tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so",
target-name="/tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so",
host-name="/tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so",
thread-group="i1",
It is not possible, given this information, to know which copy of
dlmopen-lib.1.so has actually been unloaded. An MI consumer would
need to query the full shared library list and update from that
information.
After this patch the new output is:
=library-unloaded,id="/tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so",
target-name="/tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so",
host-name="/tmp/build/gdb/testsuite/outputs/gdb.mi/mi-dlmopen/dlmopen-lib.1.so",
thread-group="i1",
ranges=[{from="0x00007ffff7fbd040",to="0x00007ffff7fbd116"}],
still-in-use="false"
The new 'ranges' field allows an MI consumer to uniquely identify
which library instance was just unmapped. A frontent could,
e.g. update a library list with no need to query the full shared
library list.
To include the 'ranges' field I updated mi_interp::on_solib_unloaded
to call a new helper function. The new helper function is split out
from the existing mi_output_solib_attribs. I was tempted to just call
mi_output_solib_attribs, but doing so would mean that the
'symbols-loaded' field was also added to the =library-unloaded event,
however, the docs for 'symbols-unloaded' on =library-loaded says:
The @var{symbols-loaded} field is emitted only for backward
compatibility and should not be relied on to convey any useful
information.
And it seemed silly to add a fields to =library-unloaded, which I
would then document as something that should be ignored. The new
helper function means I can avoid emitting the 'symbols-loaded'
field.
I have also added a 'still-in-use' field. When true this indicates
that the library was removed from the inferior's library list, but the
mapping was not removed from the inferior's address space as there is
another copy of the library that is still using the library. In the
above list, notice that ld-linux-x86-64.so.2 appears 3 times, but each
instance is mapped as 0x00007ffff7fca000. When one copy of
ld-linux-x86-64.so.2 is unloaded, here's the event:
=library-unloaded,id="/lib64/ld-linux-x86-64.so.2",
target-name="/lib64/ld-linux-x86-64.so.2",
host-name="/lib64/ld-linux-x86-64.so.2",
thread-group="i1",
ranges=[{from="0x00007ffff7fca000",to="0x00007ffff7ff03f5"}],
still-in-use="true"
The 'still-in-use' field is 'true', this indicates there are at least
one instance of this library remaining mapped at 0x00007ffff7fca000.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
|
|
Consider the gdb.base/dlmopen.exp test case. The executable in this
test uses dlmopen to load libraries into multiple linker namespaces.
When a library is loaded into a separate namespace, its dependencies
are also loaded into that namespace.
This means that an inferior can have multiple copies of some
libraries, including the dynamic linker, loaded at once.
However, glibc optimises at least the dynamic linker case. Though the
library appears to be mapped multiple times (it is in the inferior's
solib list multiple times), there is really only one copy mapped into
the inferior's address space. Here is the 'info sharedlibrary' output
on an x86-64/Linux machine once all the libraries are loaded:
(gdb) info sharedlibrary
From To Syms Read Shared Object Library
0x00007ffff7fca000 0x00007ffff7ff03f5 Yes /lib64/ld-linux-x86-64.so.2
0x00007ffff7eda3d0 0x00007ffff7f4e898 Yes /lib64/libm.so.6
0x00007ffff7d0e800 0x00007ffff7e6dccd Yes /lib64/libc.so.6
0x00007ffff7fbd040 0x00007ffff7fbd116 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib.1.so
0x00007ffff7fb8040 0x00007ffff7fb80f9 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib-dep.so
0x00007ffff7bfe3d0 0x00007ffff7c72898 Yes /lib64/libm.so.6
0x00007ffff7a32800 0x00007ffff7b91ccd Yes /lib64/libc.so.6
0x00007ffff7fca000 0x00007ffff7ff03f5 Yes /lib64/ld-linux-x86-64.so.2
0x00007ffff7fb3040 0x00007ffff7fb3116 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib.1.so
0x00007ffff7fae040 0x00007ffff7fae0f9 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib-dep.so
0x00007ffff7ce1040 0x00007ffff7ce1116 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib.1.so
0x00007ffff7cdc040 0x00007ffff7cdc0f9 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib-dep.so
0x00007ffff79253d0 0x00007ffff7999898 Yes /lib64/libm.so.6
0x00007ffff7759800 0x00007ffff78b8ccd Yes /lib64/libc.so.6
0x00007ffff7fca000 0x00007ffff7ff03f5 Yes /lib64/ld-linux-x86-64.so.2
0x00007ffff7cd7040 0x00007ffff7cd7116 Yes /tmp/build/gdb/testsuite/outputs/gdb.base/dlmopen/dlmopen-lib.2.so
Notice that every copy of /lib64/ld-linux-x86-64.so.2 is mapped at the
same address.
As the inferior closes the libraries that it loaded, the various
copies of the dynamic linker will also be unloaded.
Currently, when this happens GDB calls notify_solib_unloaded, which
triggers the gdb::observers::solib_unloaded observer. This observer
will call disable_breakpoints_in_unloaded_shlib (in breakpoint.c),
which disables any breakpoints in the unloaded solib.
The problem with this, is that, when the dynamic linker (or any solib)
is only really mapped once as is the case here, we only want to
disable breakpoints in the library when the last instance of the
library is unloaded.
The first idea that comes to mind is that GDB should not emit the
solib_unloaded notification if a shared library is still in use,
however, this could break MI consumers.
Currently, every time a copy of ld-linux-x86-64.so.2 is unloaded,
GDB's MI interpreter will emit a =library-unloaded event. An MI
consumer might use this to update the library list that it displays to
the user, and fewer notify_solib_unloaded calls will mean fewer MI
events, which will mean the MI consumer's library list could get out
of sync with GDB.
Instead I propose that we extend GDB's solib_unloaded event to add a
new flag. The new flag indicates if the library mapping is still in
use within the inferior. Now the MI will continue to emit the
expected =library-unloaded events, but
disable_breakpoints_in_unloaded_shlib can check the new flag, when it
is true (indicating that the library is still mapped into the
inferior), no breakpoints should be disabled.
The other user of the solib_unloaded observer, in bsd-uthread.c,
should, I think, do nothing if the mapping is still in use. This
observer is also disabling breakpoints when a library is unloaded.
Most of the changes in this commit relate to passing the new flag
around for the event. The interesting changes are mostly in solib.c,
where the flag value is determined, and in breakpoint.c and
bsd-uthread.c, where the flag value is read.
There's a new MI test, the source of which is mostly copied from the
gdb.base/dlmopen.exp test. This new test is checking we see all the
expected =library-unloaded events.
|
|
In the next commit I want to add more tests to the dlmopen.exp script.
Doing this will be easier if the dlmopen.exp script was structured so
that the current tests were contained inside separatate procs. So
this commit moves all of the current tests within dlmopen into two
procs, and then calls these.
There should be no changes to what is actually being tested in this
commit.
|
|
I (Andrew Burgess) have taken this patch from this series:
https://inbox.sourceware.org/gdb-patches/20211022071933.3478427-1-m.weghorn@posteo.de/
I started off reviewing that series, but wanted to explore some
alternative strategies for solving the problems this series addresses.
However, this patch I think is super useful, so I've taken it mostly
as it was in the original series.
I have made a few minor cleanups, and I've also added some more tests.
Any bugs should be considered mine (Andrew's), but I've left the
original author (Michael Weghorn) in place as the GDB side changes are
mostly their work.
The function execv_argv::init_for_no_shell (gdb/nat/fork-inferior.c),
is passed a single string ALLARGS containing all of the inferior
arguments, and contains some custom code for splitting this argument
string into a vector of separate arguments. This function is used
when startup-with-shell is off (which is not the default).
The algorithm in this function was just splitting on whitespace
characters, and ignoring any quoting, so for example:
(gdb) set startup-with-shell off
(gdb) set args "first arg" second_arg
would result in three arguments ("first), (arg"), and (second_arg)
being passed to the inferior (the parenthesis are not part of the
parsed arguments).
This commit replaces this custom argument splitting with a use of the
existing gdb_argv class (which uses the libiberty buildargv function).
This does a better job of supporting quoting and escaping, so for the
example given above we now pass two arguments (first arg)
and (second_arg), which is certainly what I would have expected as a
GDB user.
This commit changes the 'execv_argv' class accordingly and drops the
optimization to have all the 'char *' in 'm_argv' point to a single
string rather than allocating a separate string for each arg. This is
needed because we are now going to be stripping some escaping from the
arguments, for example:
(gdb) set startup-with-shell off
(gdb) set args "literal \$"
In this case we will pass the single argument (literal $) to the
inferior, the escaping backslash will be removed. This might seem
strange as usually the backslash would be stripped by the shell, and
now we have no shell. However, I think the consistent behaviour is a
good thing; whether we start with a shell or not the escaping will be
removed.
Using gdb_argv will mean that quote characters are also stripped. If
we consider the first example again:
(gdb) set startup-with-shell off
(gdb) set args "first arg" second_arg
This is now going to pass (first arg) and (second_arg), the quotes
have been removed. If the user did want the original behaviour then
they are going to have to now do this:
(gdb) set startup-with-shell off
(gdb) set args \"first arg\" second_arg
or they could do this:
(gdb) set startup-with-shell off
(gdb) set args '"first' 'arg"' second_arg
This commit also extends the three tests that cover inferior argument
passing to cover the case where 'startup-with-shell' is off. All of
these new tests pass for native targets, but there are still problems
when using remote targets.
The remote target problems arise because of how escaping is handled
while passing arguments to remote targets. I have a larger series
that aims to address this issue:
https://inbox.sourceware.org/gdb-patches/cover.1730731085.git.aburgess@redhat.com
This patch was originally part of that series, but getting a 14 patch
series reviewed is not easy, so I've pulled this patch out on its own
for now, and the new tests are (rather crudely) disabled for remote
targets.
My hope is to work through my 14 patch series posting all of the
patches in smaller groups, which will hopefully make reviewing
easier. As more of that series gets merged, the remote argument
handling will improve, before, eventually, no tests will need to be
disabled.
Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28392
Tested-By: Guinevere Larsen <guinevere@redhat.com>
Reviewed-By: Keith Seitz <keiths@redhat.com>
|
|
When reading debug info to print an error message, we'll be reading
the debug info off disk, not using edited debug info. sec->rawsize
if non-zero is the correct size.
PR 32663
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Use
bfd_get_section_limit_octets to properly size debug sections.
|
|
asymbol flags zero can result from certain combinations of ELF st_info
binding and type. asymbol section is set to bfd_abs_section for
genuine absolute symbols and also ones with a bogus st_shndx. A
fuzzed ELF object with such a symbol can tickle a bug in generic
linker code added by commit d3a65d4dea to avoid an abort, resulting
in a segfault. This patch fixes the segfault by removing the
sym->section->owner->flags test. I think it should be OK to exclude
all symbols without any BSF flags set, not just IR symbols.
PR 32662
* linker.c (_bfd_generic_link_output_symbols): Exclude all
symbols with zero flags. Replace abort with assertion.
Tidy logic.
|
|
|
|
Recent work in the TUI has improved GDB's use of the curses
wnoutrefresh and doupdate mechanism, which improves performance by
batching together updates and then doing a single set of writes to the
screen when doupdate is finally called.
The tui_batch_rendering type is a RAII class which, in its destructor,
calls doupdate to send the batched updates to the screen.
However, if there is no tui_batch_rendering active on the call stack
then any wnoutrefresh calls will remain batched but undisplayed until
the next time doupdate happens to be called.
This problem can be seen in PR gdb/32623. When an inferior is started
the 'Starting program' message is not immediately displayed to the
user.
The 'Starting program' message originates from run_command_1 in
infcmd.c, the message is sent to the current_uiout, which will be the
TUI ui_out. After the message is sent, ui_out::flush() is called,
here's the backtrace when that happens:
#0 tui_file::flush (this=0x36e4ab0) at ../../src/gdb/tui/tui-file.c:42
#1 0x0000000001004f4b in pager_file::flush (this=0x36d35f0) at ../../src/gdb/utils.c:1531
#2 0x0000000001004f71 in gdb_flush (stream=0x36d35f0) at ../../src/gdb/utils.c:1539
#3 0x00000000006975ab in cli_ui_out::do_flush (this=0x35a50b0) at ../../src/gdb/cli-out.c:250
#4 0x00000000009fd1f9 in ui_out::flush (this=0x35a50b0) at ../../src/gdb/ui-out.h:263
#5 0x00000000009f56ad in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at ../../src/gdb/infcmd.c:449
#6 0x00000000009f599a in run_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:511
And if we check out tui_file::flush (tui-file.c) we can see that this
just calls tui_win_info::refresh_window(), which in turn, just uses
wnoutrefresh to batch any pending output.
The problem is that, in the above backtrace, there is no
tui_batch_rendering active, and so there will be no doupdate call to
flush the output to the screen.
We could add a tui_batch_rendering into tui_file::flush. And
tui_file::write. And tui_file::puts .....
... but that all seems a bit unnecessary. Instead, I propose that
tui_win_info::refresh_window() should be changed. If suppress_output
is true (i.e. a tui_batch_rendering is active) then we should continue
to call wnoutrefresh(). But if suppress_output is false, meaning that
no tui_batch_rendering is in place, then we should call wrefresh(),
which immediately writes the output to the screen.
Testing but PR gdb/32623 was a little involved. We need to 'run' the
inferior and check for the 'Starting program' message. But DejaGNUU
can only check for the message once it knows the message should have
appeared. But, as the bug is that output is not displayed, we don't
have any output hints that the inferior is started yet...
In the end, I have the inferior create a file in the test's output
directory. Now DejaGNU can send the 'run' command, and wait for the
file to appear. Once that happens, we know that the 'Starting
program' message should have appeared.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=32623
Approved-By: Tom Tromey <tom@tromey.com>
|
|
GCC testsuite gcc.dg/20050321-2.c hit link errors on undefined
_GLOBAL_OFFSET_TABLE_. The compiler output referenced only
_GLOBAL_OFFSET_TABLE_-offsets to set it up, and to compute the
GOT-relative address of local symbols, none of which triggered the
machinery that enabled the creation of the dynamic section, so
_GLOBAL_OFFSET_TABLE_ ended up undefined.
Enable the dynamic section if we find a relocation involving
_GLOBAL_OFFSET_TABLE_. While at that, optimize checks for references
to it.
for bfd/ChangeLog
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Check for
_GLOBAL_OFFSET_TABLE_ references early, then compare hashed
symbols instead of strings.
(_bfd_sparc_elf_relocate_section): Compare hashed symbols.
for ld/ChangeLog
* testsuite/ld-sparc/got-def.s: New test.
* testsuite/ld-sparc/sparc.exp: Add it.
|
|
|
|
Commit 73ab3b9825 results in a warning compiling eelf_x86_64_sol2.c,
breaking --enable-targets=all builds.
warning: ‘elf_x86_64_before_allocation’ defined but not used
Fix this by hooking up the chain of before_allocation functions, so
x86_64-solaris2 calls elf_x86_64_before_allocation, while
sparc64-solaris2 calls gldelf64_sparc_sol2_before_allocation.
|
|
On ubuntu systems with libc debug info available (libc6-dbg), I see the
following failures for the gdb.base/corefile-exec-context.exp testcase:
show args
Argument list to give program being debugged when it is started is "aaaaa bbbbb ccccc ddddd e\ e\ e\ e\ e".
(gdb) PASS: gdb.base/corefile-exec-context.exp: show args
up
#1 __pthread_kill_internal (signo=6, threadid=133859295332160) at ./nptl/pthread_kill.c:78
78 in ./nptl/pthread_kill.c
(gdb) FAIL: gdb.base/corefile-exec-context.exp: move up to main
This failures is because the pattern used to parse the output of `up`
is not expecting what is seen when debugging information is present for
those frames.
This patch adjusts the pattern to allow both possible outputs.
Tested on ubuntu-22.04 and ubuntu24.04 with libc6-dbg installed for gdb
build with --with-separate-debug-dir=/usr/lib/debug.
Change-Id: I217d4b20006d0ecdb4b7a71eeb8d01597ec5ac63
Approved-By: Tom Tromey <tom@tromey.com>
|
|
On x86_64-freebsd, with test-case gdb.arch/i386-biarch-core.exp I run into a
segfault here in corelow.c:core_target_open:
...
{
gdb::unique_xmalloc_ptr<char> failing_command = make_unique_xstrdup
(bfd_core_file_failing_command (current_program_space->core_bfd ()));
if (failing_command != nullptr)
gdb_printf (_("Core was generated by `%s'.\n"),
failing_command.get ());
}
...
where bfd_core_file_failing_command returns nullptr, so the segfault happens
somewhere during "strdup (nullptr)".
There doesn't seem to be a need to make a copy of the string, so fix this by
dropping the make_unique_xstrdup.
Tested on x86_64-linux.
Tested the test-case on x86_64-freebsd.
Approved-By: Tom Tromey <tom@tromey.com>
PR corefiles/32634
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=32634
|
|
With an x86_64-w64-mingw32 targeted cross-build on x86_64-linux, I run into:
...
gdb/cli/cli-decode.c: \
In function 'ui_file_style::color parse_cli_var_color(const char**)':
gdb/cli/cli-decode.c:2917:41: error: expected ')' before 'SCNx8'
int parsed_args = sscanf (*args, "#%2" SCNx8 "%2" SCNx8 "%2" SCNx8 "%n",
...
Apparantly, the definition of SCNx8 is missing in inttypes.h.
Rewrite the sscanf call to use SCNx32, which is available.
Tested by:
- completing aforementioned cross-build, and
- build & test on x86_64-linux.
Suggested-By: Tom Tromey <tom@tromey.com>
Approved-By: Tom Tromey <tom@tromey.com>
|
|
The CPUID EDX bit[28] indicates its enablement, and it includes REP
XMODEXP and REP MONTMUL2. XMODX stands for modular exponentiation, it indicates
the support of modular exponentiation feature, both REP XMODEXP and
REP MONTMUL2 use it.
gas/ChangeLog:
* NEWS: Support Zhaoxin PadLock XMODX instructions.
* config/tc-i386.c (add_branch_prefix_frag_p): Don't add prefix to
PadLockXMODX instructions.
(output_insn): Handle PadLockXMODX instructions.
* doc/c-i386.texi: Document PadLockXMODX.
* testsuite/gas/i386/i386.exp: Add PadLockXMODX test.
* testsuite/gas/i386/padlockxmodx.d: Ditto.
* testsuite/gas/i386/padlockxmodx.s: Ditto.
opcodes/ChangeLog:
* i386-dis.c: Add PadLockXMODX.
* i386-gen.c: Ditto
* i386-opc.h (CpuPadLockXMODX): New.
* i386-opc.tbl: Add Zhaoxin PadLock XMODX instructions.
* i386-tbl.h: Regenerated.
* i386-mnem.h: Ditto.
* i386-init.h: Ditto.
|
|
We want is_whitespace() to be used uniformly, no matter what this then
expands to.
|
|
|
|
When sizing dynamic sections, elf_x86_64_scan_relocs converts GOTPCREL
relocations to R_X86_64_PC32, R_X86_64_32S or R_X86_64_32 for local
symbols. But at that time, since the output section layout is unknown,
the local symbol values can't be determined. Later linker issues an
error if the converted relocation overflows when resolving relocations
against these local symbols. Update the x86-64 ELF linker to estimate
output section layout before sizing dynamic sections and use the
preliminary output section layout info to skip the GOTPCREL relocation
conversion if the converted relocation overflows.
bfd/
PR ld/32591
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Add an input
section argument. Use the lowest-addressed section to estimate
the __ehdr_start symbol value. Don't convert relocation if the
converted relocation will overflow.
ld/
PR ld/32591
* emultempl/elf-x86.em (elf_x86_64_before_allocation):
New. Defined for x86-64.
(LDEMUL_BEFORE_ALLOCATION): Likewise.
* testsuite/ld-x86-64/pr19609-2a.d: Don't fail.
* testsuite/ld-x86-64/pr19609-2b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4a.d: Likewise.
* testsuite/ld-x86-64/pr19609-5d.d: Likewise.
* testsuite/ld-x86-64/pr19609-7a.d: Likewise.
* testsuite/ld-x86-64/pr19609-7c.d: Likewise.
* testsuite/ld-x86-64/pr32591-1.s: New file.
* testsuite/ld-x86-64/pr32591-1a-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-1a.d: Likewise.
* testsuite/ld-x86-64/pr32591-1a.t: Likewise.
* testsuite/ld-x86-64/pr32591-1b-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-1b.d: Likewise.
* testsuite/ld-x86-64/pr32591-1b.t: Likewise.
* testsuite/ld-x86-64/pr32591-1c-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-1c.d: Likewise.
* testsuite/ld-x86-64/pr32591-1c.t: Likewise.
* testsuite/ld-x86-64/pr32591-1d-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-1d.d: Likewise.
* testsuite/ld-x86-64/pr32591-1d.t: Likewise.
* testsuite/ld-x86-64/pr32591-2.s: Likewise.
* testsuite/ld-x86-64/pr32591-2-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-2.d: Likewise.
* testsuite/ld-x86-64/pr32591-2.t: Likewise.
* testsuite/ld-x86-64/pr32591-3.s: Likewise.
* testsuite/ld-x86-64/pr32591-3-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-3.d: Likewise.
* testsuite/ld-x86-64/pr32591-3.t: Likewise.
* testsuite/ld-x86-64/pr32591-4.s: Likewise.
* testsuite/ld-x86-64/pr32591-4-x32.d: Likewise.
* testsuite/ld-x86-64/pr32591-4.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/32591 tests.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
When running test-case gdb.base/list-dot-nodebug.exp with target board
cc-with-gnu-debuglink, I run into:
...
(gdb) list .^M
warning: 1 ../sysdeps/x86_64/crtn.S: No such file or directory^M
(gdb) FAIL: gdb.base/list-dot-nodebug.exp: debug=none: print before start
...
The problem is that the call to gdb_gnu_strip_debug in
gdb.base/list-dot-nodebug.exp has no effect, because the target board makes
sure that compilation delivers an executable that is already stripped, with a
.gnu_debuglink section linking to the debug info.
Fix this by using -nostdlib instead of static, which means the call to
gdb_gnu_strip_debug can be removed.
This also allows us to extend the test-case to excercise "list ." before
starting the inferior, for the debug=some scenario, which is currently
skipped:
...
# We don't test "list ." before starting with some debug info
# because GDB will choose the symtab that has debuginfo, and
# print the copyright blurb. This test isn't interested (yet?)
# in checking if this default location choice is consistent.
...
While we're at it, make the effect of "list ." on the current source location
explicit using "info source" before and after "list .".
While we're at it, make sure when running with target board
cc-with-gdb-index or cc-with-debug-names, that the failure to compile the
debug=none variant due to:
...
Error while writing index ...: No debugging symbols
...
doesn't stop the test-case from running the debug=some variant.
Tested on x86_64-linux.
Reviewed-By: Guinevere Larsen <guinevere@redhat.com>
|
|
It is possible to run GDB's testsuite against installed binaries rather
than the one from the build tree. For example, one could do:
$ make check-gdb RUNTESTFLAGS=GDB=/usr/bin/gdb
Running the testsuite this way causes error for gdb.base/gcorebg.exp:
Running [...]/gdb/testsuite/gdb.base/gcorebg.exp ...
FAIL: gdb.base/gcorebg.exp: detached=detached: Spawned gcore finished
FAIL: gdb.base/gcorebg.exp: detached=detached: Core file generated by gcore
FAIL: gdb.base/gcorebg.exp: detached=standard: Spawned gcore finished
FAIL: gdb.base/gcorebg.exp: detached=standard: Core file generated by gcore
This is due to 2 problems.
First, when running this way, the $GDB_DATA_DIRECTORY is not set (on
purpose) as the installed GDB does not need to be specified where to
find it. See this section in gdb/testsuite/lib/gdb.exp:
if ![info exists GDB] {
[....]
} else {
# If the user specifies GDB on the command line, and doesn't
# specify GDB_DATA_DIRECTORY, then assume we're testing an
# installed GDB, and let it use its own configured data directory.
if ![info exists GDB_DATA_DIRECTORY] {
set GDB_DATA_DIRECTORY ""
}
}
The testbg.exp file always assumes a non-empty GDB_DATA_DIRECTORY. As a
consequence, when calling the gcorebg binary with an empty argument
(i.e. missing argument), the program fails:
gcorebg: [...]/gdb/testsuite/gdb.base/gcorebg.c:42: main: Assertion `argc == 5' failed.
FAIL: gdb.base/gcorebg.exp: detached=standard: Spawned gcore finished
This patch does adjust the gcorebg.c and gcorebg.exp files to allow not
specifying the data-directory.
The other issue is that the testsuite assumes that the `gcore` to test
is always the one from the build tree. However, if someone is testing
an installed binary by setting GDB, I think that person would expect to
test the `gcore` script next to the binary that was specified (unless
GCORE is specified to explicitly specified). This patch does that
adjustment as well. To that end, it needs to move the block setting
GCORE after the block setting GDB.
Change-Id: I070e039903c0b5afeac357d8fac7d710ff6697b9
Approved-By: Tom Tromey <tom@tromey.com>
|
|
ld -w currently causes segmentation faults and other misbehaviour
since it changes einfo with %F in the format string (fatal error) to
not exit. This patch fixes that by introducing a new variant of einfo
called "fatal" that always exits, and replaces all einfo calls using
%F with a call to fatal without the %F. I considered modifying einfo
to inspect the first 2 or 4 chars in the format string, looking for
%F, but decided that was probably a bad idea given that translators
might have moved the %F. It's also a little nicer to inform the
compiler of a function that doesn't return.
The patch also fixes some formatting nits, and makes use of %pA
to print section names in a couple of places in aix.em.
|
|
PR 32647
|
|
On x86_64-linux, with gcc 7.5.0 I ran into a build breaker:
...
linux-fork.c: In function ‘void detach_checkpoint_command(const char*, int)’:
linux-fork.c:744:16: error: unused variable ‘inf’ [-Werror=unused-variable]
auto [fi, inf] = parse_checkpoint_id (args);
^
linux-fork.c: In function ‘void linux_fork_context(fork_info*, int, inferior*)’:
linux-fork.c:1020:22: error: unused variable ‘oldinf’ [-Werror=unused-variable]
auto [oldfp, oldinf] = find_fork_ptid (inferior_ptid);
^
...
Fix this by dropping the unused variables, similar how that was done in commit
bc13da1980c ("[gdb/build] Fix unused var in corelow.c").
Tested on x86_64-linux, by completing a build.
|
|
This changes dwarf2_read_gdb_index to return bool rather than int.
|
|
Use hehdr_start for __ehdr_start instead of elf_link_hash_lookup.
* elfxx-x86.c (elf_x86_linker_defined): Use hehdr_start if name
is NULL.
(_bfd_x86_elf_link_check_relocs): Pass NULL as __ehdr_start to
elf_x86_linker_defined.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
|
|
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Reviewed-By: Tom Tromey <tom@tromey.com>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
This commit causes a "process ptid" to be passed to all calls
of target_pid_to_str in linux-fork.c. A "process ptid" is one
in which only the pid component is set to a non-zero value;
both the lwp and tid components are zero.
The reason for doing this is that pids associated with checkpoints can
never be a thread due to the fact that checkpoints (which are
implemented by forking a process) can only (reasonably) work with
single-threaded processes.
Without this commit, many of the "info checkpoints" commands
in gdb.multi/checkpoint-multi.exp will incorrectly show some
of the checkpoints as threads. E.g...
Id Active Target Id Frame
* 1.0 y Thread 0x7ffff7cb5740 (LWP 581704) at 0x401199, file hello.c, line 51
1.2 n process 581716 at 0x401199, file hello.c, line 51
1.3 n process 581717 at 0x401199, file hello.c, line 51
2.1 n process 581708 at 0x401258, file goodbye.c, line 62
2.2 y Thread 0x7ffff7cb5740 (LWP 581712) at 0x401258, file goodbye.c, line 62
3.0 y Thread 0x7ffff7cb5740 (LWP 581713) at 0x40115c, file hangout.c, line 31
3.2 n process 581715 at 0x40115c, file hangout.c, line 31
(gdb
With this commit in place, the output looks like this instead:
Id Active Target Id Frame
* 1.0 y process 535276 at 0x401199, file hello.c, line 51
1.2 n process 535288 at 0x401199, file hello.c, line 51
1.3 n process 535289 at 0x401199, file hello.c, line 51
2.1 n process 535280 at 0x401258, file goodbye.c, line 62
2.2 y process 535284 at 0x401258, file goodbye.c, line 62
3.0 y process 535285 at 0x40115c, file hangout.c, line 31
3.2 n process 535287 at 0x40115c, file hangout.c, line 31
(For brevity, I've removed the directory elements in each of the paths
above.)
The testcase, gdb.multi/checkpoint-multi.exp, has been updated to
reflect the fact that only "process" should now appear in output
from "info checkpoints".
Reviewed-By: Tom Tromey <tom@tromey.com>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
This commit causes the output of a "checkpoint" command to be
changed from:
checkpoint N: fork returned pid DDDD
to:
Checkpoint N: fork returned pid DDDD
This change was made to bring the output of the "checkpoint" command in
line with that of other commands, e.g.:
(gdb) break main
Breakpoint 1 at ...
(gdb) catch exec
Catchpoint 2 (exec)
(gdb) add-inferior
[New inferior 2]
Added inferior 2
The tests gdb.base/checkpoint.exp, gdb.base/kill-during-detach.exp,
and gdb.multi/checkpoint-multi.exp have been updated to accept the new
(capitalized) output from the "checkpoint" command.
Reviewed-By: Tom Tromey <tom@tromey.com>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
The current linux checkpoint code, most of which may be found in
linux-fork.c, is quite broken when attempting to use more than
one inferior. Running GDB will show internal errors when starting
two inferiors, placing a checkpoint in one, then switching to
the other and doing one of the following commands, "restart",
"detach", "kill", or continue (to program exit). Test cases
for two of those scenarios may be found in this bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=31065
I've tested for each of the scenarios and many more in the new
test case, gdb.multi/checkpoint-multi.exp.
I started off with the goal of fixing just those problems, and was
mostly successful with a much smaller patch, but doing "info
checkpoints" with more than one inferior didn't work correctly due to
some of the inferiors being in the wrong program space. That led me
to making the linux-fork code fully inferior-aware.
Prior to this commit, the list of forks was being maintained in a
global named named 'fork_list'. I turned this into a per-inferior
data structure. There was also global named 'highest_fork_num' which
is also now part of the per-inferior struct. A registry key named
'checkpoint_inferior_data_key' along with function
'get_checkpoint_inferior_data' is used to access the per-inferior
data. This new function, get_checkpoint_inferior_data, is only
called by the new functions 'fork_list', 'reset_highest_fork_num',
and increment_highest_fork_num, each of which is passed a pointer to
the inferior. Most occurrences referring to the (previously) global
'fork_list' have been replaced by 'fork_list (inf)'. In some
functions, where the 'fork_list' is referenced multiple times, a local
named 'fork_list' is declared and initialized instead, like this:
auto &fork_list = ::fork_list (inf);
The constructor for 'struct fork_info' has gained an additional
parameter. In addition to passing the pid of the new fork, we now
also pass the fork identifier, fork_num, to the constructor. This
integer is shown to the user in the "info checkpoints" command and
is provided by the user, perhaps in conjunction with the inferior
number, in commands which manipulate checkpoints, e.g. 'restart' and
'delete checkpoint'.
When checkpoints are used in only one inferior, this commit will
present information to the user and will accept checkpoint identifiers
to commands in much the same way as the code did before this commit.
Per Pedro Alves's recommendations, the "info checkpoints" command has
been changed somewhat. "info checkpoints" used to display "(main
process)" for the first process in the checkpoint list. This is no
longer done because it does not provide useful information. It also
used to display "<running>", when the process is running and no useful
frame information may be displayed. This has been changed to
"(running)" in order to be more consistent with the output of the
"info threads" command. A new column has been added to the output for
showing the active process in the output from "info checkpoints".
This column will display 'y' for the active process and 'n' for the
others. For the active inferior a '*' is also printed preceding the
checkpoint identifier. Here's what things look(ed) like before and
after for just one inferior:
Before:
(gdb) info checkpoints
* 0 Thread 0x7ffff7cd3740 (LWP 84201) (main process) at 0x40114a, file hello.c, line 28
1 process 84205 at 0x401199, file hello.c, line 51
2 process 84206 at 0x4011a3, file hello.c, line 53
After:
(gdb) info checkpoints
Id Active Target Id Frame
* 0 y process 551311 at 0x40114a, file hello.c, line 28
1 n process 551314 at 0x401199, file hello.c, line 51
2 n process 551315 at 0x4011a3, file hello.c, line 53
(The Thread versus process distinction is handled by another
patch - the "After" example assumes that patch is applied too.)
When there are multiple inferiors, the "info checkpoints" output looks
like this:
(gdb) info checkpoints
Id Active Target Id Frame
1.0 y process 535276 at 0x401199, file hello.c, line 51
1.1 n process 535283 at 0x401199, file hello.c, line 51
1.2 n process 535288 at 0x401199, file hello.c, line 51
2.1 n process 535280 at 0x401258, file goodbye.c, line 62
2.2 y process 535284 at 0x401258, file goodbye.c, line 62
* 3.0 y process 535285 at 0x40115c, file hangout.c, line 31
3.2 n process 535287 at 0x40115c, file hangout.c, line 31
A new function named 'parse_checkpoint_id' has been added. As its
name suggests, it's responsible for parsing a string representing a
checkpoint identifier. These identifiers may be either a decimal
number representing the checkpoint number in the current inferior or
two decimal numbers separated by '.', in which case the first is the
inferior number and the second is the checkpoint number in that
inferior. It is called by delete_checkpoint_command,
detach_checkpoint_command, info_checkpoints_command, and
restart_command. Calls to 'parse_checkpoint_id' replace calls to
'parse_and_eval_long', plus error checking and error reporting code
near the calls to 'parse_and_eval_long'. As such, error checking and
reporting has been consolidated into a single function and the
messages output are more uniform, though this has necessitated changes
to the existing test case gdb.base/checkpoint.exp.
The functions 'find_fork_ptid' and 'find_fork_pid' used to return a
pointer to a fork_info struct. They now return a pair consisting of
the pointer to a fork_info struct in addition to a pointer to the
inferior containing that checkpoint.
'find_fork_id' returns a pointer to a fork_info struct just as it did
before, but it's now gained a new parameter, 'inf', which is the
inferior in which to look.
info_checkpoints_command used to simply iterate over the list of
forks (checkpoints), printing each one out. It now needs to iterate
over all inferiors and, for those which have checkpoints, it needs
to iterate over the list of checkpoints in that inferior. As noted
earlier, the format of the output has been changed so that checkpoint
identifiers incorporating an inferior number may be printed.
linux_fork_context, called by restart_command, now contains code to
switch inferiors when the fork being restarted is in an inferior which
is different from the current one. The scoped_switch_fork_info class
now also contains code for switching inferiors in both the constructor
and destructor.
gdb/linux-nat.c has a few changes. All but one of them are related
to passing the inferior to one of the linux-fork functions. But
one of the tests in linux_nat_target::detach has also changed in
a non-obvious way. In attempting to determine whether to call
linux_fork_detach(), that code used to do:
if (pid == inferior_ptid.pid () && forks_exist_p ())
It's been simplified to:
if (forks_exist_p (inf))
I had added the 'pid == inferior_ptid.pid ()' condition in late 2023
while working on a detach bug. It was kind of a hack to prevent
calling linux_fork_detach() when in a different inferior. That's no
longer needed since the call to forks_exist_p does this directly -
i.e. it is now inferior-aware.
Finally, the header file 'linux-fork.h' has been updated to reflect
the fact that add_fork, linux_fork_killall, linux_fork_detach, and
forks_exist_p all now require that a pointer to an inferior be passed
to these functions. Additionally (as mentioned earlier),
find_fork_pid now returns std::pair<fork_info *, inferior *> instead
'of fork_info *'.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31065
Reviewed-By: Tom Tromey <tom@tromey.com>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
PR 32644
|
|
files.
PR 32643
|
|
PR 32641
|
|
Opcodes and bitmasks are 32-bit numbers and omitting leading
zeros might be interpreted as if they are 28-bit.
|
|
Clean up whitespace for conforming to GNU coding standards
|
|
relocs for a corrupt input file.
PR 32638
|
|
The recent commit b601c58034ed755fb765fc13782b6876bffd25d4 causes the
gdb configure to fail if --enable-targets=all was requested, but 64 bit
bfd was not enabled. This was due to a build failure first reported
against mips, and that I also encountered building on a 32 bit mips
system, but that looked like a general failure.
Further examination showed that this is, in fact, mips-specific (or at
least, not completely generic) as other targets like debian-i386 and
32-bit arm could build all targets just fine.
This commit restricts the new error to only trigger in mips hosts.
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
elf bfd cookie structure.
PR 32636
|
|
Convert uses of ISSPACE() and testing for specific characters into
calls to is_whitespace and is_end_of_stmt. While doing that, also
remove some redundant tests, like ';' together with is_end_of_line[]
and is_whitespace and !is_end_of_line.
Note the invalid casts being fixed as part of moving to is_... macros;
there were (unsigned int) where there should have been (unsigned char)
applied on char as index to is_end_of_line[].
Beware that the input language changes slightly: some constructs with
whitespace characters other than space and TAB are now invalid.
|
|
|
|
Commit 1c525b0e037 ("[gdb/tui] Fix assert in
tui_source_window_base::refresh_window") added an early return in
tui_source_window_base::refresh_window.
Assert after the early return that "m_pad != nullptr", and clean up the
following asserts that allow for m_pad == nullptr.
Tested on x86_64-linux.
Reported-By: Andrew Burgess <aburgess@redhat.com>
Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
Recent commit 0bd340d6704 ("pre-commit autoupdate") bumped the isort version
to 6.0.0.
Subsequently, I started running into:
...
$ SKIP=flake8,isort pre-commit run
An error has occurred: InvalidManifestError:
==> File /home/vries/.cache/pre-commit/repommstqefj/.pre-commit-hooks.yaml
==> At Hook(id='isort')
==> At key: stages
==> At index 0
=====> Expected one of commit, commit-msg, manual, merge-commit, \
post-checkout, post-commit, post-merge, post-rewrite, prepare-commit-msg, \
push but got: 'pre-commit'
Check the log at /home/vries/.cache/pre-commit/pre-commit.log
...
I found a similar PR [1], that explains that using pre-commit as a stage (as
isort 6.0.0 does) is supported starting pre-commit 3.2.0.
Add minimum_pre_commit_version 3.2.0 in .pre-commit-config.yaml, as suggested
in the PR.
After adding this, I get a more helpful message:
...
$ SKIP=flake8,isort pre-commit run
An error has occurred: InvalidConfigError:
==> File .pre-commit-config.yaml
==> At Config()
==> At key: minimum_pre_commit_version
=====> pre-commit version 3.2.0 is required but version 2.17.0 is installed. \
Perhaps run `pip install --upgrade pre-commit`.
Check the log at /home/vries/.cache/pre-commit/pre-commit.log
...
and after doing so which upgrades pre-commit to version 4.1.0, as well as
re-installing pre-commit using:
...
$ pre-commit uninstall
$ pre-commit install
...
I have a functional setup again.
Interestingly, since pre-commit 4.1.0 runs in a python 3.11 environment, I no
longer need to skip flake8 and isort, as I needed to previously when the
system python 3.6 was used.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
[1] https://github.com/psf/black/issues/4065
|
|
pre-commit currently runs flake8 only on `gdb/python/**/*.py`. There
are more files we can run it on, without running it on all the testsuite
files. Add:
- gdb/gdb-gdb.py.in
- gdb/*.py
- gdb/testsuite/*.py
Fix the new errors that popped up:
gdb/copyright.py:29:21: W605 invalid escape sequence '\*'
gdb/copyright.py:29:29: W605 invalid escape sequence '\*'
gdb/copyright.py:29:38: W605 invalid escape sequence '\*'
gdb/copyright.py:29:46: W605 invalid escape sequence '\*'
gdb/copyright.py:34:1: F401 'datetime' imported but unused
gdb/testsuite/analyze-racy-logs.py:150:9: E722 do not use bare 'except'
Change-Id: Ia864c22d4f170d4e18ce3beb06a86c49966654b2
Approved-By: Tom Tromey <tom@tromey.com>
|
|
inline-section-gc.exp ends up passing "-lm" to gnatmake as an "marg"
-- meaning gnatmake should process it itself. However, the gnat-llvm
gnatmake does not know what to do with this, so the test fails.
This patch rearranges the arguments so that the (implicit) trailing
-lm ends up being passed through to the linker.
|
|
The function start address in a SFrame FDE (sfde_func_start_address)
is encoded as a signed offset to the function start address from the
SFrame section.
The PC range start address in a SFrame FRE (sfre_start_address) is
encoded as an unsigned offset to the range from the function start
address.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
|
|
Unwinding of the stack pointer (SP) is performed using the assumed
default rule ".cfi_val_offset <SP-reg>, 0", so that SP unwinds as:
SP = CFA
Warn if the CFI directive .cfi_val_offset is encountered for the
SP register with a different offset.
gas/
* gen-sframe.c (sframe_xlate_do_val_offset): Skip SFrame FDE
if non-default SP value offset.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
|
|
Use the appropriate struct cfi_insn_data union members to access
fields when generating SFrame information from CFI directives.
gas/
* gen-sframe.c (sframe_xlate_do_def_cfa, sframe_xlate_do_offset,
sframe_xlate_do_val_offset): Access ri fields, as .cfi_def_cfa,
.cfi_offset, and .cfi_val_offset define a register and offset
value.
* (sframe_xlate_do_def_cfa_register): Access r field, as
.cfi_def_cfa_register defines a register.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
|
|
This commit adds a new method to Python architecture objects that
returns a void type for that architecture.
This will be useful later to create types for function symbols created
using Python extension code.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
|
This commit adds new propery "subblocks" to gdb.Block objects. This
allows Python to traverse block tree starting with global block.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Approved-By: Andrew Burgess <aburgess@redhat.com>
|
