aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/rk_i2c.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"WIP/20May2024-nextTom Rini1-1/+0
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini1-0/+1
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07i2c: Remove <common.h> and add needed includesTom Rini1-1/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-06-05i2c: rockchip: De-initialize the bus after start bit failureOndrej Jirman1-3/+4
Failure can happen when i2c is used without initializing pinctrl properly, which U-Boot happily allows in SPL. Without this fix, further I2C access would fail, even after proper pinctrl initialization. Signed-off-by: Ondrej Jirman <megi@xff.cz> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-01-05dm: Rename U_BOOT_DRIVER_ALIAS to DM_DRIVER_ALIASSimon Glass1-1/+1
We use the U_BOOT_ prefix (i.e. U_BOOT_DRIVER) to declare a driver but in every other case we just use DM_. Update the alias macros to use the DM_ prefix. We could perhaps rename U_BOOT_DRIVER() to DM_DRIVER(), but this macro is widely used and there is at least some benefit to indicating it us a U-Boot driver, particularly for code ported from Linux. So for now, let's keep that name. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass1-2/+2
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass1-1/+1
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09core: add support for U_BOOT_DRIVER_ALIASWalter Lozano1-0/+2
Currently when using OF_PLATDATA the binding between devices and drivers is done trying to match the compatible string in the node with a driver name. However, usually a single driver supports multiple compatible strings which causes that only devices which its compatible string matches a driver name get bound. To overcome this issue, this patch adds the U_BOOT_DRIVER_ALIAS macro, which generates no code at all, but allows an easy way to declare driver name aliases. Thanks to this, dtoc could be improve to look for the driver name based on its alias when it populates the U_BOOT_DEVICE entry. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-09drivers: rename drivers to match compatible stringWalter Lozano1-2/+2
When using OF_PLATDATA, the bind process between devices and drivers is performed trying to match compatible string with driver names. However driver names are not strictly defined, and also there are different names used when declaring a driver with U_BOOT_DRIVER, the name of the symbol used in the linker list and the used in the struct driver_info. In order to make things a bit more clear, rename the drivers names. This will also help for further OF_PLATDATA improvements, such as checking for valid driver names. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Add a fix for sandbox of-platdata to avoid using an invalid ANSI colour: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-23rockchip: i2c: don't sent stop bit after each messageVasily Khoruzhick1-2/+3
That's not correct and it breaks SMBUS-style reads and and writes for some chips (e.g. SYR82X/SYR83X). Stop bit should be sent only after the last message. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang1-3/+3
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: i2c: enable i2c controller for rk3066 and rk3188Alexander Kochetkov1-5/+89
rk3066 and rk3188 has two I2C controller implementations. Current I2C driver wan't work with legacy implementation. Switching between controllers is performed using a bit inside GFR_SOC_CON1 register. The bit setting is performed by pinctrl driver. The patch ask pinctrl to do settings. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [fix warnings by including the rk3228 variant in the compatible-list]: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini1-2/+0
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-01rockchip: i2c: rk3328: support i2c for rk3328 SoCElaine Zhang1-0/+1
Add compatible to support rk3328 i2c Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Heiko Schocher<hs@denx.de>
2017-09-18rockchip: i2c: Convert to livetreePhilipp Tomsich1-1/+1
Update the Rockchip I2C driver to support livetree. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-09-05rockchip: i2c: fix >32 byte readsWadim Egorov1-3/+16
The hw can read up to 32 bytes at a time. If we need more than one chunk, we have to enter the plain RX mode. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-01dm: Rename dev_addr..() functionsSimon Glass1-1/+1
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-15rockchip: i2c: Enable i2c for rk3399eric.gao@rock-chips.com1-0/+1
To enable mipi display, we need to enable pmic rk808 first for lcd3v3 power,which use i2c0 to communicate with soc. So enable i2c0. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-04rockchip: i2c: Add compatibles for Rockchip Cortex-A9 socsHeiko Stübner1-0/+2
The Cortex-A9 socs rk3066 and rk3188 share the IP but have their own compatible values, so add them to make the i2c on these platforms accessible. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-13rockchip: i2c: fix >32 byte writesJohn Keeping1-2/+2
The special handling of the chip address and register address must only happen before we send the data buffer, otherwise we will end up inserting both of these every 32 bytes. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-13rockchip: i2c: move register write out of inner loopJohn Keeping1-2/+2
There is no point in writing intermediate values to the txdata registers. Also add padding to the debug logging to make it easier to read when there are leading zeroes. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-13rockchip: i2c: use named constant when appropriateJohn Keeping1-1/+1
Make it clear that we are using the same value in two adjacent lines. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19clk: convert API to match reset/mailbox styleStephen Warren1-4/+2
The following changes are made to the clock API: * The concept of "clocks" and "peripheral clocks" are unified; each clock provider now implements a single set of clocks. This provides a simpler conceptual interface to clients, and better aligns with device tree clock bindings. * Clocks are now identified with a single "struct clk", rather than requiring clients to store the clock provider device and clock identity values separately. For simple clock consumers, this isolates clients from internal details of the clock API. * clk.h is split so it only contains the client/consumer API, whereas clk-uclass.h contains the provider API. This aligns with the recently added reset and mailbox APIs. * clk_ops .of_xlate(), .request(), and .free() are added so providers can customize these operations if needed. This also aligns with the recently added reset and mailbox APIs. * clk_disable() is added. * All users of the current clock APIs are updated. * Sandbox clock tests are updated to exercise clock lookup via DT, and clock enable/disable. * rkclk_get_clk() is removed and replaced with standard APIs. Buildman shows no clock-related errors for any board for which buildman can download a toolchain. test/py passes for sandbox (which invokes the dm clk test amongst others). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-21rockchip: i2c: Update the driver to use the new clock IDSimon Glass1-16/+22
We can use the new clk_get_by_index() function to get the correct clock. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02rockchip: Add I2C driverSimon Glass1-0/+391
Add an I2C driver for the Rockchip RK3288, using driver model. It should work for other Rockchip SoCs also. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-30 22:06:06 +0000