aboutsummaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)AuthorFilesLines
2020-04-30sifive: fu540: Enable spi-nor flash supportJagan Teki1-0/+1
HiFive Unleashed A00 support is25wp256 spi-nor flash, So enable the same and add test result log for future reference. Tested on SiFive FU540 board. Thanks to Sagar for various use cases and tests. [QUAD mode in dt with spi-tx-bus-width: <4>] pp opcode = 0x34 [QUAD MODE] read opcode = 0x6c [QUAD MODE] erase opcode = 0x21 SPI-NOR: 1. erase entire flash: Pass 2. write entire flash: Pass 3. read entire flash: Pass 4. cmp 32MiB read back data: Pass 5. MMC: Booted Linux and dtb from mmc [SPI MODE in dt with spi-tx-bus-width: <1>] pp opcode = 0x12 [SPI MODE] read opcode = 0xc [SPI MODE] erase opcode = 0x21 SPI-NOR: 1. erase entire flash: Pass 2. write entire flash: Pass 3. read entire flash: Pass 4. cmp 32MiB read back data: Pass 5. MMC: Booted Linux and dtb from mmc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30riscv: dts: hifive-unleashed-a00: Add -u-boot.dtsiJagan Teki1-0/+10
Add U-Boot specific dts file for hifive-unleashed-a00, this would help to add u-boot specific properties and other node changes without touching the base dts(i) files which are easy to sync from Linux. Added spi2 alias for qspi2 as an initial u-boot specific property change. spi probing in current dm model is very much rely on aliases numbering. Even though the qspi2 can't come under any associated spi nor flash it would require to specify the same to make proper binding happen for other spi slaves. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-23riscv: Move all fdt fixups togetherAtish Patra2-33/+33
Keep all the fdt fixups together for better code management. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23riscv: Copy the reserved-memory nodes to final DTAtish Patra1-1/+7
The DT used by U-Boot may be different from the DT being passed to the OS if the DT is loaded from external media such as network or mmc. In that case, the reserved-memory node needs to be copied to the DT passed to the OS. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23riscv: Setup reserved-memory node for FU540Atish Patra1-0/+15
FU540 uses OF_SEPARATE instead of OF_PRIOR_STAGE. Enable OF_BOARD_FIXUP to update the DT with reserved-memory node. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23riscv: Provide a mechanism to fix DT for reserved memoryAtish Patra6-0/+108
In RISC-V, M-mode software can reserve physical memory regions by setting appropriate physical memory protection (PMP) csr. As the PMP csr are accessible only in M-mode, S-mode U-Boot can not read this configuration directly. However, M-mode software can pass this information via reserved-memory node in device tree so that S-mode software can access this information. This patch provides a framework to copy to the reserved-memory node from one DT to another. This will be used to update the DT used by U-Boot and the DT passed to the next stage OS. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23riscv: Add boot hartid to device treeAtish Patra1-0/+22
Linux booting protocol mandates that register "a0" contains the hartid. However, U-Boot can not pass the hartid via a0 during standard UEFI protocol. DT nodes are commonly used to pass such information to the OS. Add a DT node under chosen node to indicate the boot hartid. EFI stub in Linux kernel will parse this node and pass it to the real kernel in "a0" before jumping to it. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23riscv: Make SBI v0.2 the default SBI versionBin Meng1-1/+1
To work with latest OpenSBI release (v0.7 or above) that has the HSM extension support, select the SBI v0.2 support by default. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23riscv: Add Kconfig option for SBI v0.2Bin Meng1-1/+19
SBI v0.2 is more scalable and extendable to handle future needs for RISC-V supervisor interfaces. For example, with SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23riscv: Add SMP Kconfig option dependency for U-Boot properBin Meng1-0/+1
U-Boot proper running in S-mode only need SMP support when using SBI v0.1. With SBI v0.2 HSM extension, it does not need implement multicore boot in U-Boot proper. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23riscv: Introduce SPL_SMP Kconfig option for U-Boot SPLBin Meng5-11/+22
With SBI v0.2 HSM extension, only a single hart need to boot and enter operating system. The booting hart can bring up secondary harts one by one afterwards. For U-Boot running in SPL, SMP can be turned on, while in U-Boot proper, SMP can be optionally turned off if using SBI v0.2 HSM. Introduce a new SPL_SMP Kconfig option to support this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23riscv: Merge unnecessary SMP ifdefs in start.SBin Meng1-4/+0
Two consecutive SMP ifdefs blocks can be combined into one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23riscv: qemu: Remove the simple-bus driver for the SoC nodeBin Meng1-14/+0
Prior to QEMU v3.1.0, QEMU generated the 'virt' SoC node with a "riscv-virtio-soc" compatible string, and a "simple-bus" driver was created to accommodate that special case in U-Boot. Starting from QEMU v3.1.0, the SoC node was set as a "simple-bus", hence the special simple-bus driver is no longer needed. Update the doc to mention the latest tested QEMU version 4.2.0. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-23riscv: ax25: cache: Remove SPL_RISCV_MMODE config checkPragnesh Patel1-8/+8
CONFIG_IS_ENABLED(FOO) will check FOO config option for U-Boot, SPL and TPL, so remove unnecessary CONFIG_IS_ENABLED() Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-10kconfig / kbuild: Re-sync with Linux 4.19Tom Rini1-2/+2
Align Kconfig and Kbuild logic to Linux 4.19 release with minimal impact on files outside of this scope. Our previous Kconfig sync was done by commit 5972ff077e0f ("kconfig / kbuild: re-sync with Linux 4.18"). In this particular re-sync in order to keep clang support working a number of related changes needed to be pulled in that had been missed previously. Not all of these changes we easily traceable and so have been omitted from the list below. The imported Linux commits are: [From prior to v4.18] 9f3f1fd29976 kbuild: Add __cc-option macro d7f14c66c273 kbuild: Enable Large File Support for hostprogs 6d79a7b424a5 kbuild: suppress warnings from 'getconf LFS_*' 24403874316a Shared library support 86a9df597cdd kbuild: fix linker feature test macros when cross compiling with Clang 0294e6f4a000 kbuild: simplify ld-option implementation [From v4.18 to v4.19] 96f14fe738b6 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS 10844aebf448 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS b90a368000ab kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS 8377bd2b9ee1 kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS f92d19e0ef9b kbuild: Use HOST*FLAGS options from the command line 4ab3b80159d4 kconfig: check for pkg-config on make {menu,n,g,x}config 693359f7ac90 kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE f60b992e30ff kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags) 2fb9279f2c3e kbuild: change ld_flags to contain LDFLAGS_$(@F) c931d34ea085 arm64: build with baremetal linker target instead of Linux when available 5accd7f3360e kconfig: handle format string before calling conf_message_callback() a2ff4040151a kconfig: rename file_write_dep and move it to confdata.c 0608182ad542 kconfig: split out useful helpers in confdata.c adc18acf42a1 kconfig: remove unneeded directory generation from local*config 79123b1389cc kconfig: create directories needed for syncconfig by itself 16952b77d8b5 kconfig: make syncconfig update .config regardless of sym_change_count d6c6ab93e17f kbuild: remove deprecated host-progs variable 56869d45e364 kconfig: fix the rule of mainmenu_stmt symbol c151272d1687 kconfig: remove unused sym_get_env_prop() function 1880861226c1 kconfig: remove P_ENV property type e3fd9b5384f3 scripts/dtc: consolidate include path options in Makefile 4bf6a9af0e91 kconfig: add build-only configurator targets f1575595d156 kconfig: error out when seeing recursive dependency 5e8c5299d315 kconfig: report recursive dependency involving 'imply' f498926c47aa kconfig: improve the recursive dependency report 98a4afbfafd2 kconfig: fix "Can't open ..." in parallel build 9a9ddcf47831 kconfig: suppress "configuration written to .config" for syncconfig 87a32e624037 kbuild: pass LDFLAGS to recordmcount.pl d503ac531a52 kbuild: rename LDFLAGS to KBUILD_LDFLAGS 217c3e019675 disable stringop truncation warnings for now bc8d2e20a3eb kconfig: remove a spurious self-assignment fd65465b7016 kconfig: do not require pkg-config on make {menu,n}config 5a4630aadb9a ftrace: Build with CPPFLAGS to get -Qunused-arguments Note that this adds new cleanup work to do in that we should adapt the shared library support we have to what is now upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-31Merge branch 'next' of git://git.denx.de/u-boot-usb into nextTom Rini5-68/+299
2020-03-17riscv: Implement new SBI v0.2 extensionsBin Meng2-7/+33
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. Implement the replacement extensions and few additional new SBI function calls that makes way for a better SBI interface in future. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Introduce a new config for SBI v0.1Bin Meng3-0/+16
We now have SBI v0.2 which is more scalable and extendable to handle future needs for RISC-V supervisor interfaces. Introduce a new config and move all SBI v0.1 code under that config. This allows to implement the new replacement SBI extensions cleanly and remove v0.1 extensions easily in future. Currently, the config is enabled by default. Once all M-mode software, with v0.1, is no longer in use, this config option and all relevant code can be easily removed. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407361/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Add SBI v0.2 extension definitionsBin Meng1-0/+17
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2 calling convention. This patch just defines these new extensions. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407359/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Add basic support for SBI v0.2Bin Meng4-79/+243
The SBI v0.2 introduces a base extension which is backward compatible with v0.1. Implement all helper functions and minimum required SBI calls from v0.2 for now. All other base extension function will be added later as per need. As v0.2 calling convention is backward compatible with v0.1, remove the v0.1 helper functions and just use v0.2 calling convention. Add a new Kconfig options CONFIG_SBI for the new SBI v0.2 codes, and let CONFIG_SBI_IPI depend on it. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407363/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Mark existing SBI as v0.1 SBIBin Meng1-19/+21
As per the new SBI specification, current SBI implementation version is defined as 0.1 and will be removed/replaced in future. Each of the function call in 0.1 is defined as a separate extension which makes easier to replace them one at a time. Rename existing implementation to reflect that. This patch is just a preparatory patch for SBI v0.2 and doesn't introduce any functional changes. This commit is inspired from Linux kernel patch: https://patchwork.kernel.org/patch/11407355/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-03-17riscv: Avoid calling sbi_clear_ipi()Bin Meng1-1/+2
There is no need for S-mode U-Boot to call sbi_clear_ipi() as it can be cleared directly from S-mode. This saves some cycles. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas@auer.io>
2020-03-17riscv: Fix sbi_remote_sfence_vma{,_asid}Bin Meng1-7/+12
Currently sbi_remote_sfence_vma{,_asid} does not pass their arguments to SBI at all, which is semantically incorrect. This keeps in sync with Linux kernel commit: a21344dfc6ad: fix sbi_remote_sfence_vma{,_asid} Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas@auer.io>
2020-03-16Kconfig: Remove redundant variable setsTom Rini1-3/+0
In a few places we have Kconfig entries that set SPL_LDSCRIPT to what is the default value anyways. Drop these. Cc: Michal Simek <monstr@monstr.eu> Cc: Rick Chen <rick@andestech.com> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> (for Microblaze) Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada1-26/+0
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_unmap_single()Masahiro Yamada1-3/+1
dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_map_single()Masahiro Yamada1-2/+3
Make dma_map_single() return the dma address, and remove the pointless volatile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini3-0/+3
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-10riscv: Remove unnecessary instructionSean Anderson1-3/+2
The add instruction on risc-v can have any three sources and targets, so there is no need for an intermediate mov. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-10riscv: Add option to print registers on exceptionSean Anderson3-12/+44
When debugging, it can be helpful to see more information about an unhandled exception. This patch adds an option to view the registers at the time of the trap, similar to the linux output on a kernel panic. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-10riscv: Fix breakage caused by linker relaxationSean Anderson1-1/+0
Due to the two-instruction sequence needed to access arbitrary memory locations, the RISC-V linker aggressively optimises memory accesses and jumps at link-time. This is called "linker relaxation," and is discussed in this SiFive article <https://www.sifive.com/blog/all-aboard-part-3-linker-relaxation-in-riscv-toolchain>. One of the optimizations in place is to assume that the __global_pointer symbol is placed in the gp register. To quote the article: "...The magic __global_pointer$ symbol is defined to point 0x800 bytes past the start of the .sdata section. The 0x800 magic number allows signed 12-bit offsets from __global_pointer$ to address symbols at the start of the .sdata section. The linker assumes that if this symbol is defined, then the gp register contains that value, which it can then use to relax accesses to global symbols within that 12-bit range. The compiler treats the gp register as a constant so it doesn't need to be saved or restored, which means it is generally only written by _start, the ELF entry point." However, U-Boot instead keeps the global data pointer in gp. This causes memory accesses and jumps optimized to use the gp pointer to fail. To fix this problem, we undefine the __global_pointer symbol. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass3-0/+3
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-01-25asm: dma-mapping.h: Fix dma mapping functionsVignesh Raghavendra1-2/+21
Subsystems such as USB expect dma_map_single() and dma_unmap_single() to do dcache flush/invalidate operations as required. For example, see see drivers/usb/gadget/udc/udc-core.c::usb_gadget_map_request(). Currently drivers do this locally, (see drivers/usb/dwc3/ep0.c, drivers/mtd/nand/raw/denali.c etc..) Update arch specific dma_map_single() and dma_unmap_single() APIs to do cache flush/invalidate operations, so that drivers need not implement them locally. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-01-17common: Move hang() to the same header as panic()Simon Glass4-0/+4
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move device-tree setup functions to fdt_support.hSimon Glass1-0/+1
These functions relate to setting up the device tree for booting the OS. The fdt_support.h header file supports similar functions, so move these there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move relocate_code() to init.hSimon Glass1-1/+1
This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-10riscv: add option to wait for ack from secondary harts in smp functionsLukas Auer5-12/+28
Add a wait option to smp_call_function() to wait for the secondary harts to acknowledge the call-function request. The request is considered to be acknowledged once each secondary hart has cleared the corresponding IPI. As part of the call-function request, the secondary harts invalidate the instruction cache after clearing the IPI. This adds a delay between acknowledgment (clear IPI) and fulfillment (call function) of the request. We want to use the acknowledgment to be able to judge when the request has been completed. Remove the delay by clearing the IPI after cache invalidation and just before calling the function from the request. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-12-10riscv: add functions for reading the IPI statusLukas Auer4-0/+43
Add the function riscv_get_ipi() for reading the pending status of IPIs. The supported controllers are Andes' Platform Level Interrupt Controller (PLIC), the Supervisor Binary Interface (SBI), and SiFive's Core Local Interruptor (CLINT). Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com>
2019-12-10riscv: dts: Add #address-cells and #size-cells in nor nodeRick Chen2-2/+6
Those are required for cfi-flash driver to get correct address information. Also modify size description correctly. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: dts: Support four cores SMPRick Chen2-6/+108
Add CPU2 and CPU3 information in cpus node to support four cores SMP booting. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: Fix clear bss loop in the start-up codeRick Chen3-4/+4
For RV64, it will use sd instruction to clear t0 register, and the increament will be 8 bytes. So if the difference between__bss_strat and __bss_end was not 8 bytes aligned, the clear bss loop will overflow and acks like system hang. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: ax25: cache: Add SPL_RISCV_MMODE for SPLRick Chen1-14/+46
The mcache_ctl csr only can be manipulated in M mode. Add SPL_RISCV_MMODE for U-Boot SPL to control cache operation. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: andes_plic: Fix some wrong configurationsRick Chen1-4/+7
Fix two wrong settings of andes plic driver as below: 1. Fix wrong pending register base definition. 2. Declaring the en variable in enable_ipi() as unsigned int instead of int can help to fix wrong plic enabling setting in RV64. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: ax25: add SPL supportRick Chen1-1/+3
The U-Boot SPL will boot in M mode and load the FIT image which include OpenSBI and U-Boot proper images. After loading progress, it will jump to OpenSBI first and then U-Boot proper which will run in S mode. Also remove V5L2_CACHE due to U-Boot SPL code size consideration. Without this concern, it can be enable manually for performance. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10riscv: dts: Add hifive-unleashed-a00 dts from LinuxJagan Teki3-0/+348
Sync the hifive-unleashed-a00 dts from Linux with below commit details: commit <2993c9b04e616df0848b655d7202a707a70fc876> ("riscv: dts: HiFive Unleashed: add default chosen/stdout-path") Idea is to periodically sync the dts from Linux instead of tweaking internal changes one after another, so better not add any intermediate changes in between. This would help to maintain the dts files easy and meaningful since we are reusing device tree files from Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-12-10riscv: increase stack size to avoid a stack overflow during distro bootLukas Auer1-1/+1
This fixes a problem, where booting Linux using distro boot will sometimes lead to an invalid instruction exception on the main hart. The secondary harts are not affected and boot Linux successfully. The root cause of this problem is a stack overflow on the main hart. With distro boot, the current default stack size of 8KiB on RISC-V is not sufficient and will cause a stack overflow. The stacks are allocated sequentially. In the case of a stack overflow the stack of the main hart can reach into that of another hart and be corrupted. The stack overflow previously did not cause any problems, because only stack frames, which are not used anymore since the hart enters Linux, were corrupted. Starting with GCC 9, the stack usage has decreased. Now, only the most recent stack frame overflows into the stack of a secondary hart and is corrupted. The illegal instruction exception is caused by the secondary hart overwriting the return address in the stack frame of the main hart with an address that does not include valid code. Increase the default stack size of each hart to 16KiB to avoid this problem. Reported-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Rick Chen <rick@andestech.com>
2019-12-02common: Move board_get_usable_ram_top() out of common.hSimon Glass1-0/+1
Move this function into init.h which seems to be designed for this sort of thing. Also update the header to declare struct global_data so that it can be included without global_data.h being needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move enable/disable_interrupts out of common.hSimon Glass1-0/+1
Move these two functions into the irq_funcs.h header file. Also move interrupt_handler_t as this is used by the irq_install_handler() function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move interrupt functions into a new headerSimon Glass1-0/+1
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move ARM cache operations out of common.hSimon Glass3-0/+3
These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-07-19 15:11:09 +0000