aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-11-06bmips: Add Inteno XG6846 boardLinus Walleij2-0/+58
This adds support for the Inteno XG6846 board based on the Broadcom MIPS 6328 SoC. The default boot will read a uImage from flash and boot it. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-14dm: dts: Convert driver model tags to use new schemaSimon Glass33-113/+113
Now that Linux has accepted these tags, move the device tree files in U-Boot over to use them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-13mips: mtmips: add two reference boards for mt7621Weijie Gao3-0/+151
The mt7621_rfb board supports integrated giga PHYs plus one external giga PHYs. It also has up to 512MiB DDR3, 16MB SPI-NOR, 3 mini PCI-e x1 slots, SDXC and USB. The mt7621_nand_rfb board is almost the same as mt7621_rfb board, but it uses NAND flash and SDXC is not available. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-07-13mips: mtmips: add support for MediaTek MT7621 SoCWeijie Gao2-0/+460
This patch adds support for MediaTek MT7621 SoC. All files are dedicated for u-boot. The default build target is u-boot-mt7621.bin. The specification of this chip: https://www.mediatek.com/products/homenetworking/mt7621 Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-04mips: octeon: mrvl, octeon-nic23.dts: Add ethernet DT supportStefan Roese1-0/+238
Add the Octeon ethernet (BGX) and SFP DT nodes to the NIC23 dts file to enable ethernet support on this board. Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-04mips: octeon: mrvl, octeon-ebb7304.dts: Add ethernet DT supportStefan Roese1-0/+45
Add the Octeon ethernet (BGX), SMI and PHY DT nodes to the EBB7304 dts file to enable ethernet support on this board. Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-04mips: octeon: mrvl, cn73xx.dtsi: Add ethernet (BGX) and SMI DT nodesStefan Roese1-0/+35
Add the Octeon ethernet (BGX) and SMI DT node to the dtsi file. Signed-off-by: Stefan Roese <sr@denx.de>
2022-02-09dts: automatically build necessary .dtb filesRasmus Villemoes1-0/+2
When building for a custom board, it is quite common to maintain a private branch which include some defconfig and .dts files. But to hook up those .dts files requires modifying a file "belonging" to upstream U-Boot, the arch/*/dts/Makefile. Forward-porting that branch to a newer upstream then often results in a conflict which, while it is trivial to resolve by hand, makes it harder to have a CI do "try to build our board against latest upstream". The .config usually includes information on precisely what .dtb(s) are needed, so to avoid having to modify the Makefile, simply add the files in (SPL_)OF_LIST to dtb-y. A technicality is that (SPL_)OF_LIST is not always defined, so rework the Kconfig symbols so that (SPL_)OF_LIST is always defined (when (SPL_)OF_CONTROL), but only prompted for in the cases which used to be their "depends on". nios2 and microblaze already have something like this in their dts/Makefile, and the rationale in commit 41f59f68539 is similar to the above. So this simply generalizes existing practice. Followup patches could remove the logic in those two makefiles, just as there's potential for moving some common boilerplate from all the arch/*/dts/Makefile files to the new scripts/Makefile.dts. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18MIPS: malta: add DT bindings for PCI host controllerDaniel Schwierzeck1-0/+28
Add DT binding for GT64120 and MSC01 PCI controllers. Only GT64120 is enabled by default to support Qemu. The MSC01 node will be dynamically enabled by Malta board code dependent on the plugged core card. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: ebb7304: Add support for some I2C devicesAaron Williams1-0/+11
This patch adds support for the following I2C devices connected to I2C bus 0 on the Octeon EBB7304: - Dallas DS1337 RTC - TLV EEPROM Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: dts/dtsi: Change UART DT node to use clocks propertyAaron Williams2-4/+2
We already have a clock driver for MIPS Octeon. This patch changes the Octeon DT nodes to supply the clock property via the clock driver instead of using an hard-coded value, which is not correct in all cases. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: Add Octeon III NIC23 board supportStefan Roese2-0/+163
This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-23mips: octeon: mrvl, cn73xx.dtsi: Add AHCI/SATA DT nodeStefan Roese1-0/+19
Add the AHCI compatible SATA DT node to the Octeon CN73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23mips: octeon: mrvl, cn73xx.dtsi: Add PCIe controller DT nodeStefan Roese1-0/+16
This patch adds the PCIe controller node to the MIPS Octeon 73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-22mips: octeon: mrvl,octeon_ebb7304.dts: Add MMC DT nodeStefan Roese1-0/+57
Add the MMC DT node to the Octeon EBB7304 DT file including the regulator node for the MMC power supply. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-22mips: octeon: mrvl,cn73xx.dtsi: Add MMC DT nodeStefan Roese1-0/+27
Add the MMC DT node to the Octeon CN73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-22net: jr2: Reset switchHoratiu Vultur1-2/+4
Make sure to reset the switch core at probe time. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-01-24mips: mtmips: add two reference boards for mt7620Weijie Gao3-0/+199
The mt7620_rfb board supports integrated 10/100M PHYs plus two external giga PHYs. It also has 8MB SPI-NOR, mini PCI-e x1 slot, SDHC and USB. The mt7620_mt7530_rfb boards supports an external MT7530 giga switch and a 16MB SPI-NOR flash. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24mips: mtmips: add support for MediaTek MT7620 SoCWeijie Gao2-0/+310
This patch adds support for MediaTek MT7620 SoC. All files are dedicated for u-boot. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24mips: dts: switch to board defines for dtb for mtmipsWeijie Gao1-3/+2
Previous the dts files for gardena-smart-gateway-mt7688 and linkit-smart-7688 are set to be built when mtmips is selected. This can lead to a compilation error if another soc is added to this arch with different dtsi files. So it's better to build the dtb only if their board is selected. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-12-18spi: dw: Add SoC-specific compatible stringsSean Anderson2-2/+2
This adds SoC-specific compatible strings to all users of the designware spi device. This will allow for the correct driver to be selected for each device. Where it is publicly documented, a compatible string for the specific device version has also been added. Devices without publicly-documented device versions include MSCC SoCs, and Arc Socs. All compatible strings except those for SoCFPGAs and some of the versioned strings have been taken from Linux. Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly necessary. However, it is a good cleanup and brings things closer to Linux. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-07mips: octeon: Add USB DT nodesStefan Roese2-0/+84
Add the USB device tree nodes to the Octeon dts/dtsi files. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-07mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT nodeStefan Roese1-0/+17
This patch adds the memory controller (LMC) DT node to the Octeon 3 dtsi file. It also adds the L2C DT node, as this is referenced by the DDR driver. Signed-off-by: Stefan Roese <sr@denx.de>
2020-09-23mips: vocore2: fix various issuesMauro Condarelli1-1/+1
- fix SPL image generation - fix incorrect console output - increase malloc_f and malloc_r space to fix LZMA decompression errors - increase SPI flash clock Signed-off-by: Mauro Condarelli <mc5686@mclink.it> [squashed to one patch, fix commit subject and description] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-09-23mips: dts: Fix PIC32MZDA GPIO register definitionsJohn Robertson1-2/+2
The GPIO bank name for banks J and K are not correct when using the 'gpio' command from the console. The driver derives the bank name from the device tree instance string by using the instance value and adding 'A': gpio0@xxaddrxx is Bank A, gpio1@yyaddryy is Bank B and so on. On the PIC32, there is no Bank I so instances 8 and 9 need to be incremented as a minimum change. An alternative (less opaque) implementation would be to use a bank-name property instead but this would require modifying the driver code too. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: dts: Fix PIC32MZDA GPIO register definitionsJohn Robertson1-23/+22
GPIO state cannot be changed via the device tree (e.g. with gpio-hog) or using the 'gpio' command from the console. The root cause is a discrepancy between the driver and the device tree: the driver code expects an absolute I/O address in the <reg> property, while the device tree defines the address relative to a declaration in the parent pinctrl node. Changing the device tree to fix a driver issue would normally be wrong, however: - I have run the first version of U-Boot in which this driver appears (v2016.03) and the same problem exists, so this is not a regression; - There is no code that references a parent device tree node that might suggest the intent of the author was to parse the DT as it exists now; - The equivalent Linux PIC32 GPIO driver also uses absolute addresses for the GPIO <reg> property. This change brings the U-Boot DT more into line with Linux. Additionally, the data sheet (Microchip ref. 60001361H) shows that the register set to control a GPIO bank spans 0xE0 bytes, but the device tree specified size is only 0x48 bytes. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: dts: Fix device tree warnings for PIC32MZDAJohn Robertson1-0/+11
Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: pic32mzdask: disable SDHCI SDCD signal workaroundJohn Robertson1-0/+1
The PIC32MZ DA Starter Kit does not need the card detect workaround because the SDCD signal line is connected properly. Disable the workaround in this case. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-08-03mips: octeon: mrvl, octeon-ebb7304.dts: Add SPI flash DT nodeStefan Roese1-0/+9
Add the SPI flash DT node for the EBB7304. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03mips: octeon: mrvl,cn73xx.dtsi: Add SPI DT nodeStefan Roese1-0/+10
Add the Octeon SPI DT node to the dtsi file. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03mips: octeon: dts: Add Octeon clock driver DT nodesStefan Roese2-1/+11
This patch adds the DT nodes for the Octeon clock support via the common clk_ API. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03mips: octeon: dts: Add I2C DT nodesStefan Roese2-0/+30
Add I2C DT nodes to the Octeon dts / dtsi files. Signed-off-by: Stefan Roese <sr@denx.de>
2020-08-03mips: octeon: mrvl,cn73xx.dtsi: Add GPIO DT nodesStefan Roese1-0/+26
Add the Octeon GPIO DT node to the dtsi file. Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18mips: octeon: Add minimal Octeon 3 EBB7304 EVK supportStefan Roese2-0/+97
This patch adds very basic minimal support for the Marvell Octeon 3 CN73xx based EBB7304 EVK. Please note that the basic Octeon port does not support DDR3/4 initialization yet. To still use U-Boot on with this port, the L2 cache (4MiB) is used as RAM. This way, U-Boot can boot to the prompt on this board. Supported devices: - UART - reset - CFI parallel NOR flash Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18mips: octeon: dts: Add Octeon 3 cn73xx base dtsi fileStefan Roese1-0/+64
This patch adds the base dtsi file for the Octeon 3 cn73xx SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-27mips: Add support for SoM "VoCore2".Mauro Condarelli2-0/+86
Small patch to add support for VoCore/VoCore2 board. VoCore is open hardware and runs OpenWrt/LEDE. It has WIFI, USB, UART, 20+ GPIOs but is only one inch square. It will help you to make a smart house, study embedded system or even make the tiniest router in the world. Details about this SoM can be found at "https://vocore.io/v2.html". Signed-off-by: Mauro Condarelli <mc5686@mclink.it> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-27mips: mtmips: add support for mt7628-rfbWeijie Gao2-0/+68
This patch adds support for mt7628 reference board. SPL_DM and DT are not enabled for SPL to save about 17KiB for u-boot-spl.bin. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: add SPL supportWeijie Gao2-1/+39
This patch adds SPL support for mtmips platform. The lowlevel architecture is split into SPL and the rest parts are built into a memory loadable u-boot image. Optional SPL_DM and OF_CONTROL are also supported. The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are not enabled and the memory bootable u-boot (u-boot.img) is generated automatically so there is not need to add a separate config for it. A lzma compressed payload (u-boot-lzma.img) is also generated and it will be combined with u-boot-spl.bin to form the unified ROM bootable binary u-boot-mtmips.bin. A spl loader is added to support uncompress the payload. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27dts: mtmips: add alternative pinmux node for uart2Weijie Gao1-0/+5
This patch adds a new pinmux for UART2, which shares the pins with SPIS. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: make use of sysreset-resetctrl for mt7628 socWeijie Gao1-5/+5
This patch replaces sysreset-syscon with sysreset-resetctrl for mt7628 soc. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl to eth nodes for all boardsWeijie Gao2-0/+4
This patch adds default eth pinctrl for all boards. There are two pinctrl nodes used for two scenarios: ephy_iot_mode - for IOT boards which have only one port (PHY0) ephy_router_mode - For routers which have more than one ports Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688Weijie Gao1-0/+3
This adds default pinctrl (dual SPI chip select) for gardena smart gateway Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add mmc related nodes for mt7628an.dtsiWeijie Gao1-0/+22
This patch adds mmc related nodes for mt7628an.dtsi Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: enable eth port0 led and link poll functions for all boardsWeijie Gao3-1/+27
This patch adds default p0led status and phy0 link polling for all boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: update reset controller node for mt7628Weijie Gao1-12/+24
This patch updates reset controller node for mt7628 Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add default pinctrl for uart nodesWeijie Gao1-0/+9
This patch adds default pinctrl for uart nodes Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add pinctrl node for mt7628Weijie Gao1-0/+150
This patch adds pinctrl node with default pin state for mt7628an.dtsi. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: add clock node for mt7628Weijie Gao1-4/+17
This patch adds clkctrl node for mt7628 and adds clocks property for some node. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: enable high-speed UART support for mt7628Weijie Gao1-3/+3
All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which support baudrate up to 921600. The high-speed UART is compatible with ns16550 when baudrate <= 115200. Add compatible string to dtsi file so u-boot can use it when serial_mtk driver is built in. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25dts: mtmips: move uart property clock-frequency into mt7628an.dtsiWeijie Gao3-2/+6
The UART of MT7628 has fixed 40MHz input clock so there is no need to put clock-frequency in every dts files. Just put it into the common dtsi file. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
generated by cgit v1.1 at 2024-07-08 11:26:52 +0000