diff options
Diffstat (limited to 'arch/arm/mach-socfpga/spl_gen5.c')
| -rw-r--r-- | arch/arm/mach-socfpga/spl_gen5.c | 38 |
1 files changed, 10 insertions, 28 deletions
diff --git a/arch/arm/mach-socfpga/spl_gen5.c b/arch/arm/mach-socfpga/spl_gen5.c index 142b60f..9dd0afb 100644 --- a/arch/arm/mach-socfpga/spl_gen5.c +++ b/arch/arm/mach-socfpga/spl_gen5.c @@ -21,6 +21,7 @@ #include <debug_uart.h> #include <fdtdec.h> #include <watchdog.h> +#include <dm/uclass.h> DECLARE_GLOBAL_DATA_PTR; @@ -38,16 +39,12 @@ u32 spl_boot_device(void) return BOOT_DEVICE_RAM; case 0x2: /* NAND Flash (1.8V) */ case 0x3: /* NAND Flash (3.0V) */ - socfpga_per_reset(SOCFPGA_RESET(NAND), 0); return BOOT_DEVICE_NAND; case 0x4: /* SD/MMC External Transceiver (1.8V) */ case 0x5: /* SD/MMC Internal Transceiver (3.0V) */ - socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0); - socfpga_per_reset(SOCFPGA_RESET(DMA), 0); return BOOT_DEVICE_MMC1; case 0x6: /* QSPI Flash (1.8V) */ case 0x7: /* QSPI Flash (3.0V) */ - socfpga_per_reset(SOCFPGA_RESET(QSPI), 0); return BOOT_DEVICE_SPI; default: printf("Invalid boot device (bsel=%08x)!\n", bsel); @@ -123,9 +120,9 @@ static void socfpga_pl310_clear(void) void board_init_f(ulong dummy) { const struct cm_config *cm_default_cfg = cm_get_default_config(); - unsigned long sdram_size; unsigned long reg; int ret; + struct udevice *dev; /* * First C code to run. Clear fake OCRAM ECC first as SBE @@ -156,10 +153,7 @@ void board_init_f(ulong dummy) socfpga_bridges_reset(1); } - socfpga_per_reset(SOCFPGA_RESET(SDR), 0); - socfpga_per_reset(SOCFPGA_RESET(UART0), 0); socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0); - timer_init(); debug("Reconfigure Clock Manager\n"); @@ -181,8 +175,7 @@ void board_init_f(ulong dummy) sysmgr_pinmux_init(); sysmgr_config_warmrstcfgio(0); - /* De-assert reset for peripherals and bridges based on handoff */ - reset_deassert_peripherals_handoff(); + /* De-assert reset for bridges based on handoff */ socfpga_bridges_reset(0); debug("Unfreezing/Thaw all I/O banks\n"); @@ -200,27 +193,16 @@ void board_init_f(ulong dummy) hang(); } + ret = uclass_get_device(UCLASS_RESET, 0, &dev); + if (ret) + debug("Reset init failed: %d\n", ret); + /* enable console uart printing */ preloader_console_init(); - if (sdram_mmr_init_full(0xffffffff) != 0) { - puts("SDRAM init failed.\n"); - hang(); - } - - debug("SDRAM: Calibrating PHY\n"); - /* SDRAM calibration */ - if (sdram_calibration_full() == 0) { - puts("SDRAM calibration failed.\n"); - hang(); - } - - sdram_size = sdram_calculate_size(); - debug("SDRAM: %ld MiB\n", sdram_size >> 20); - - /* Sanity check ensure correct SDRAM size specified */ - if (get_ram_size(0, sdram_size) != sdram_size) { - puts("SDRAM size check failed!\n"); + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); hang(); } |