powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 329 deletions

diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
deleted file mode 100644
index 75633f6..0000000
--- a/include/configs/motionpro.h
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-/* CPU and board */
-#define CONFIG_MPC5200		1	/* This is a MPC5200 CPU */
-#define CONFIG_MOTIONPRO	1	/* ... on Promess Motion-PRO board */
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_NETCONSOLE	1	/* network console */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC	1
-#define CONFIG_MPC5xxx_FEC_MII100
-#define CONFIG_PHY_ADDR		0x2
-#define CONFIG_PHY_TYPE		0x79c874
-#define CONFIG_RESET_PHY_R	1
-
-/*
- * Autobooting
- */
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_CMDLINE_EDITING		1	/* add command line history	*/
-
-/*
- * Default environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=motionpro\0"						\
-	"netmask=255.255.255.0\0"					\
-	"ipaddr=192.168.1.106\0"					\
-	"serverip=192.168.1.100\0"					\
-	"gatewayip=192.168.1.100\0"					\
-	"console=ttyPSC0,115200\0"					\
-	"u-boot_addr=400000\0"						\
-	"kernel_addr=400000\0"						\
-	"fdt_addr=700000\0"						\
-	"ramdisk_addr=800000\0"						\
-	"multi_image_addr=800000\0"					\
-	"rootpath=/opt/eldk-4.2/ppc_6xx\0"				\
-	"u-boot=/tftpboot/motionpro/u-boot.bin\0"			\
-	"bootfile=/tftpboot/motionpro/uImage\0"				\
-	"fdt_file=/tftpboot/motionpro/motionpro.dtb\0"			\
-	"ramdisk_file=/tftpboot/motionpro/uRamdisk\0"			\
-	"multi_image_file=kernel+initrd+dtb.img\0"			\
-	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
-	"update=prot off fff00000 +${filesize};"			\
-		"era fff00000 +${filesize}; "				\
-		"cp.b ${u-boot_addr} fff00000 ${filesize};"		\
-		"prot on fff00000 +${filesize}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"fat_args=setenv bootargs root=/dev/sda rw\0"			\
-	"mtdids=nor0=ff000000.flash\0"					\
-	"mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," 	\
-				"128k(env),128k(redund_env),"	  	\
-				"128k(dtb),128k(user_data)\0"		\
-	"addcons=setenv bootargs ${bootargs} console=${console}\0"	\
-	"addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0"	\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
-		"${netmask}:${hostname}:${netdev}:off panic=1 "		\
-		"console=${console}\0"					\
-	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
-		"tftp ${fdt_addr} ${fdt_file}; "			\
-		"run nfsargs addip addmtd; "				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_self=tftp ${kernel_addr} ${bootfile}; "			\
-		"tftp ${fdt_addr} ${fdt_file}; "			\
-		"tftp ${ramdisk_addr} ${ramdisk_file}; "		\
-		"nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; "	\
-		"run ramargs addip addcons addmtd; "			\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"fat_multi=run fat_args addip addmtd; fatload ide 0:1 "		\
-		"${multi_image_addr} ${multi_image_file}; "		\
-		"bootm ${multi_image_addr}\0"				\
-	""
-#define CONFIG_BOOTCOMMAND	"run fat_multi"
-
-/*
- * do board-specific init
- */
-#define CONFIG_BOARD_EARLY_INIT_R	1
-
-/*
- * Low level configuration
- */
-
-/*
- * Clock configuration: SYS_XTALIN = 33MHz
- */
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000
-
-/*
- * Set IPB speed to 100MHz
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
-
-/*
- * Memory map
- */
-/*
- * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
- * Setting MBAR to otherwise will cause system hang when using SmartDMA such
- * as network commands.
- */
-#define CONFIG_SYS_MBAR			0xf0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-/*
- * If building for running out of SDRAM, then MBAR has been set up beforehand
- * (e.g., by the BDI). Otherwise we must specify the default boot-up value of
- * MBAR, as given in the doccumentation.
- */
-#if CONFIG_SYS_TEXT_BASE == 0x00100000
-#define CONFIG_SYS_DEFAULT_MBAR	0xf0000000
-#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-#define CONFIG_SYS_LOWBOOT		1
-#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* 384 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* 1 MiB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
-
-/*
- * Chip selects configuration
- */
-/* Boot Chipselect */
-#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_BOOTCS_CFG		0x00045D00
-
-/* Flash memory addressing */
-#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS0_CFG		CONFIG_SYS_BOOTCS_CFG
-
-/* Dual Port SRAM -- Kollmorgen Drive memory addressing */
-#define CONFIG_SYS_CS1_START		0x50000000
-#define CONFIG_SYS_CS1_SIZE		0x10000
-#define CONFIG_SYS_CS1_CFG		0x05055800
-
-/* Local register access */
-#define CONFIG_SYS_CS2_START		0x50010000
-#define CONFIG_SYS_CS2_SIZE		0x10000
-#define CONFIG_SYS_CS2_CFG		0x05055800
-
-/* Anybus CompactCom Module memory addressing */
-#define CONFIG_SYS_CS3_START		0x50020000
-#define CONFIG_SYS_CS3_SIZE		0x10000
-#define CONFIG_SYS_CS3_CFG		0x05055800
-
-/* No burst and dead cycle = 2 for all CSs */
-#define CONFIG_SYS_CS_BURST		0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE	0x22222222
-
-/*
- * SDRAM configuration
- */
-/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
-#define SDRAM_CONFIG1		0x62322900
-#define SDRAM_CONFIG2		0x88c70000
-#define SDRAM_CONTROL		0x504f0000
-#define SDRAM_MODE		0x00cd0000
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER	1
-#define CONFIG_SYS_FLASH_BASE		0xff000000
-#define CONFIG_SYS_FLASH_SIZE		0x01000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-#define CONFIG_FLASH_16BIT		/* Flash is 16-bit */
-
-/*
- * MTD configuration
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=motionpro-0"
-#define MTDPARTS_DEFAULT	"mtdparts=motionpro-0:"			  \
-					"13m(fs),2m(kernel),384k(uboot)," \
-					"128k(env),128k(redund_env),"	  \
-					"128k(dtb),-(user_data)"
-
-/*
- * IDE/ATA configuration
- */
-#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
-#define CONFIG_SYS_IDE_MAXBUS		1
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0060
-#define CONFIG_SYS_ATA_REG_OFFSET	CONFIG_SYS_ATA_DATA_OFFSET
-#define CONFIG_SYS_ATA_STRIDE		4
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_DS1337	1
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-
-/*
- * Status LED configuration
- */
-
-#define ENABLE_GPIO_OUT		0x00000024
-#define LED_ON			0x00000010
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* This has to be a multiple of the Flash sector size */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE		0x1000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-
-/* Configuration of redundant environment */
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*
- * Pin multiplexing configuration
- */
-
-/* PSC1: UART1
- * PSC2: GPIO (default)
- * PSC3: GPIO (default)
- * USB: 2xUART4/5
- * Ethernet: Ethernet 100Mbit with MD
- * Timer: CAN2/GPIO
- * PSC6/IRDA: GPIO (default)
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG	0x1105a004
-
-/*
- * Motion-PRO's CPLD revision control register
- */
-#define CPLD_REV_REGISTER	(CONFIG_SYS_CS2_START + 0x06)
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory    */
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x03e00000	/* 1 ... 62 MiB in DRAM */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default kernel load addr */
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-
-/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
-#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
-
-#define OF_CPU			"PowerPC,5200@0"
-#define OF_SOC			"soc5200@f0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
-
-#endif /* __CONFIG_H */