phy: marvell: cp110: remove unused definitions

Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of
1.5G/3G/6.25G were referenced in the driver non configuration (dts)
was using it.

This patch removes unused definitions.

Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

4 files changed, 27 insertions, 42 deletions

diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts
index 98a582d..a6ef401 100644
--- a/arch/arm/dts/armada-8040-mcbin.dts
+++ b/arch/arm/dts/armada-8040-mcbin.dts
@@ -302,7 +302,7 @@
 		phy-type = <COMPHY_TYPE_SFI>;
 	};
 	phy5 {
-		phy-type = <COMPHY_TYPE_SGMII3>;
+		phy-type = <COMPHY_TYPE_SGMII2>;
 		phy-speed = <COMPHY_SPEED_3_125G>;
 	};
 };
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index 45dba73..9293607 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -24,9 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
 static const char *get_speed_string(u32 speed)
 {
 	static const char * const speed_strings[] = {
-		"1.25 Gbps", "1.5 Gbps", "2.5 Gbps",
-		"3.0 Gbps", "3.125 Gbps", "5 Gbps",
-		"5.125 Gpbs", "6 Gbps", "6.25 Gbps",
+		"1.25 Gbps", "2.5 Gbps", "3.125 Gbps",
+		"5 Gbps", "5.125 Gpbs", "6 Gbps",
 		"10.3125 Gbps"
 	};
 
@@ -40,11 +39,10 @@ static const char *get_type_string(u32 type)
 {
 	static const char * const type_strings[] = {
 		"UNCONNECTED", "PEX0", "PEX1", "PEX2", "PEX3",
-		"SATA0", "SATA1", "SATA2", "SATA3", "SGMII0",
-		"SGMII1", "SGMII2", "SGMII3", "QSGMII", "USB3"
-		"USB3_HOST0", "USB3_HOST1", "USB3_DEVICE",
-		"XAUI0", "XAUI1", "XAUI2", "XAUI3",
-		"RXAUI0", "RXAUI1", "SFI", "IGNORE"
+		"SATA0", "SATA1", "SGMII0", "SGMII1", "SGMII2",
+		"USB3", "USB3_HOST0", "USB3_HOST1",
+		"USB3_DEVICE", "RXAUI0", "RXAUI1", "SFI", "AP",
+		"IGNORE"
 	};
 
 	if (type < 0 || type > COMPHY_TYPE_MAX)
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 11dc46b..620a749 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -1130,8 +1130,6 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 			break;
 		case COMPHY_TYPE_SATA0:
 		case COMPHY_TYPE_SATA1:
-		case COMPHY_TYPE_SATA2:
-		case COMPHY_TYPE_SATA3:
 			mode =  COMPHY_FW_MODE_FORMAT(COMPHY_SATA_MODE);
 			ret = comphy_sata_power_up(lane, hpipe_base_addr,
 						   comphy_base_addr,
@@ -1166,7 +1164,6 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 					 mode);
 			break;
 		case COMPHY_TYPE_SGMII2:
-		case COMPHY_TYPE_SGMII3:
 			if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) {
 				debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n",
 				      lane);
diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h
index 7d62dcf..8e92705 100644
--- a/include/dt-bindings/comphy/comphy_data.h
+++ b/include/dt-bindings/comphy/comphy_data.h
@@ -7,16 +7,13 @@
 #define _COMPHY_DATA_H_
 
 #define COMPHY_SPEED_1_25G		0
-#define COMPHY_SPEED_1_5G		1
-#define COMPHY_SPEED_2_5G		2
-#define COMPHY_SPEED_3G			3
-#define COMPHY_SPEED_3_125G		4
-#define COMPHY_SPEED_5G			5
-#define COMPHY_SPEED_5_15625G		6
-#define COMPHY_SPEED_6G			7
-#define COMPHY_SPEED_6_25G		8
-#define COMPHY_SPEED_10_3125G		9
-#define COMPHY_SPEED_MAX		10
+#define COMPHY_SPEED_2_5G		1
+#define COMPHY_SPEED_3_125G		2
+#define COMPHY_SPEED_5G			3
+#define COMPHY_SPEED_5_15625G		4
+#define COMPHY_SPEED_6G			5
+#define COMPHY_SPEED_10_3125G		6
+#define COMPHY_SPEED_MAX		7
 #define COMPHY_SPEED_INVALID		0xff
 
 #define COMPHY_TYPE_UNCONNECTED		0
@@ -26,26 +23,19 @@
 #define COMPHY_TYPE_PEX3		4
 #define COMPHY_TYPE_SATA0		5
 #define COMPHY_TYPE_SATA1		6
-#define COMPHY_TYPE_SATA2		7
-#define COMPHY_TYPE_SATA3		8
-#define COMPHY_TYPE_SGMII0		9
-#define COMPHY_TYPE_SGMII1		10
-#define COMPHY_TYPE_SGMII2		11
-#define COMPHY_TYPE_SGMII3		12
-#define COMPHY_TYPE_QSGMII		13
-#define COMPHY_TYPE_USB3                14
-#define COMPHY_TYPE_USB3_HOST0		15
-#define COMPHY_TYPE_USB3_HOST1		16
-#define COMPHY_TYPE_USB3_DEVICE		17
-#define COMPHY_TYPE_XAUI0		18
-#define COMPHY_TYPE_XAUI1		19
-#define COMPHY_TYPE_XAUI2		20
-#define COMPHY_TYPE_XAUI3		21
-#define COMPHY_TYPE_RXAUI0		22
-#define COMPHY_TYPE_RXAUI1		23
-#define COMPHY_TYPE_SFI			24
-#define COMPHY_TYPE_IGNORE		25
-#define COMPHY_TYPE_MAX			26
+#define COMPHY_TYPE_SGMII0		7
+#define COMPHY_TYPE_SGMII1		8
+#define COMPHY_TYPE_SGMII2		9
+#define COMPHY_TYPE_USB3		10
+#define COMPHY_TYPE_USB3_HOST0		11
+#define COMPHY_TYPE_USB3_HOST1		12
+#define COMPHY_TYPE_USB3_DEVICE		13
+#define COMPHY_TYPE_RXAUI0		14
+#define COMPHY_TYPE_RXAUI1		15
+#define COMPHY_TYPE_SFI			16
+#define COMPHY_TYPE_AP			17
+#define COMPHY_TYPE_IGNORE		18
+#define COMPHY_TYPE_MAX			19
 #define COMPHY_TYPE_INVALID		0xff
 
 #define COMPHY_POLARITY_NO_INVERT	0