aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorIbai Erkiaga <ibai.erkiaga-elorza@amd.com>2023-10-13 13:37:27 +0100
committerMichal Simek <michal.simek@amd.com>2023-11-07 13:47:09 +0100
commit3e891448920a8d53205d05e36372d65ae1289734 (patch)
treefec407dc3407901857661f667c79706bbaf3aff3
parentfdff4b3c489d683ab08d6453ac91af593ab07a2a (diff)
downloadu-boot-3e891448920a8d53205d05e36372d65ae1289734.zip
u-boot-3e891448920a8d53205d05e36372d65ae1289734.tar.gz
u-boot-3e891448920a8d53205d05e36372d65ae1289734.tar.bz2
zynqmp: migrate gqspi debug to logging
The following patch migrates the usage of debug and printf functions to the relevant logging function as per U-Boot DM guidelines. Additionally some of the debugging statements have been rearanged for a more meaningfull debug experience. aarch64-linux-gnu-size reports 229 bytes less when debug is enabled at file level, while is just 5bytes more when disabled. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com> Link: https://lore.kernel.org/r/20231013123739.2757979-1-ibai.erkiaga-elorza@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
-rw-r--r--drivers/spi/zynqmp_gqspi.c82
1 files changed, 33 insertions, 49 deletions
diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c
index ec59ef58..a323994 100644
--- a/drivers/spi/zynqmp_gqspi.c
+++ b/drivers/spi/zynqmp_gqspi.c
@@ -5,6 +5,8 @@
* Xilinx ZynqMP Generic Quad-SPI(QSPI) controller driver(master mode only)
*/
+#define LOG_CATEGORY UCLASS_SPI
+
#include <common.h>
#include <cpu_func.h>
#include <log.h>
@@ -192,8 +194,6 @@ static int zynqmp_qspi_of_to_plat(struct udevice *bus)
{
struct zynqmp_qspi_plat *plat = dev_get_plat(bus);
- debug("%s\n", __func__);
-
plat->regs = (struct zynqmp_qspi_regs *)(dev_read_addr(bus) +
GQSPI_REG_OFFSET);
plat->dma_regs = (struct zynqmp_qspi_dma_regs *)
@@ -250,7 +250,7 @@ static u32 zynqmp_qspi_genfifo_mode(u8 buswidth)
case 4:
return GQSPI_SPI_MODE_QSPI;
default:
- debug("Unsupported bus width %u\n", buswidth);
+ log_warning("Unsupported bus width %u\n", buswidth);
return GQSPI_SPI_MODE_SPI;
}
}
@@ -262,6 +262,8 @@ static void zynqmp_qspi_fill_gen_fifo(struct zynqmp_qspi_priv *priv,
u32 config_reg, ier;
int ret = 0;
+ log_content("%s, GFIFO_CMD: 0x%X\n", __func__, gqspi_fifo_reg);
+
writel(gqspi_fifo_reg, &regs->genfifo);
config_reg = readl(&regs->confr);
@@ -278,7 +280,7 @@ static void zynqmp_qspi_fill_gen_fifo(struct zynqmp_qspi_priv *priv,
ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_GFEMTY_MASK, 1,
GQSPI_TIMEOUT, 1);
if (ret)
- printf("%s Timeout\n", __func__);
+ log_warning("%s, Timeout\n", __func__);
}
@@ -286,6 +288,8 @@ static void zynqmp_qspi_chipselect(struct zynqmp_qspi_priv *priv, int is_on)
{
u32 gqspi_fifo_reg = 0;
+ log_debug("%s, assert: %d\r\n", __func__, is_on);
+
if (is_on) {
gqspi_fifo_reg = zynqmp_qspi_bus_select(priv);
gqspi_fifo_reg |= GQSPI_SPI_MODE_SPI |
@@ -295,8 +299,6 @@ static void zynqmp_qspi_chipselect(struct zynqmp_qspi_priv *priv, int is_on)
gqspi_fifo_reg |= GQSPI_IMD_DATA_CS_DEASSERT;
}
- debug("GFIFO_CMD_CS: 0x%x\n", gqspi_fifo_reg);
-
zynqmp_qspi_fill_gen_fifo(priv, gqspi_fifo_reg);
}
@@ -311,8 +313,8 @@ static void zynqmp_qspi_set_tapdelay(struct udevice *bus, u32 baudrateval)
clk_rate = plat->frequency;
reqhz = (clk_rate / (GQSPI_BAUD_DIV_SHIFT << baudrateval));
- debug("%s, req_hz:%d, clk_rate:%d, baudrateval:%d\n",
- __func__, reqhz, clk_rate, baudrateval);
+ log_debug("%s, clk_rate:%d, baudrateval:%d, bus_clk: %d\n",
+ __func__, clk_rate, baudrateval, reqhz);
if (!(IS_ENABLED(CONFIG_ARCH_VERSAL) ||
IS_ENABLED(CONFIG_ARCH_VERSAL_NET))) {
@@ -362,7 +364,8 @@ static int zynqmp_qspi_set_speed(struct udevice *bus, uint speed)
u32 confr;
u8 baud_rate_val = 0;
- debug("%s\n", __func__);
+ log_debug("%s, Speed: %d, Max: %d\n", __func__, speed, plat->frequency);
+
if (speed > plat->frequency)
speed = plat->frequency;
@@ -383,9 +386,8 @@ static int zynqmp_qspi_set_speed(struct udevice *bus, uint speed)
confr &= ~GQSPI_BAUD_DIV_MASK;
confr |= (baud_rate_val << 3);
writel(confr, &regs->confr);
- zynqmp_qspi_set_tapdelay(bus, baud_rate_val);
- debug("regs=%p, speed=%d\n", priv->regs, plat->speed_hz);
+ zynqmp_qspi_set_tapdelay(bus, baud_rate_val);
}
return 0;
@@ -399,8 +401,6 @@ static int zynqmp_qspi_probe(struct udevice *bus)
unsigned long clock;
int ret;
- debug("%s: bus:%p, priv:%p\n", __func__, bus, priv);
-
priv->regs = plat->regs;
priv->dma_regs = plat->dma_regs;
priv->io_mode = plat->io_mode;
@@ -416,7 +416,6 @@ static int zynqmp_qspi_probe(struct udevice *bus)
dev_err(bus, "failed to get rate\n");
return clock;
}
- debug("%s: CLK %ld\n", __func__, clock);
ret = clk_enable(&clk);
if (ret) {
@@ -429,6 +428,8 @@ static int zynqmp_qspi_probe(struct udevice *bus)
/* init the zynq spi hw */
zynqmp_qspi_init_hw(priv);
+ log_debug("%s, Rerence clock frequency: %ld\n", __func__, clock);
+
return 0;
}
@@ -438,7 +439,8 @@ static int zynqmp_qspi_set_mode(struct udevice *bus, uint mode)
struct zynqmp_qspi_regs *regs = priv->regs;
u32 confr;
- debug("%s\n", __func__);
+ log_debug("%s, 0x%X\n", __func__, mode);
+
/* Set the SPI Clock phase and polarities */
confr = readl(&regs->confr);
confr &= ~(GQSPI_CONFIG_CPHA_MASK | GQSPI_CONFIG_CPOL_MASK);
@@ -461,16 +463,11 @@ static int zynqmp_qspi_fill_tx_fifo(struct zynqmp_qspi_priv *priv, u32 size)
u32 *buf = (u32 *)priv->tx_buf;
u32 len = size;
- debug("TxFIFO: 0x%x, size: 0x%x\n", readl(&regs->isr),
- size);
-
while (size) {
ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_TXNFULL_MASK, 1,
GQSPI_TIMEOUT, 1);
- if (ret) {
- printf("%s: Timeout\n", __func__);
- return ret;
- }
+ if (ret)
+ return log_msg_ret("Timeout\n", ret);
if (size >= 4) {
writel(*buf, &regs->txd0r);
@@ -501,10 +498,8 @@ static int zynqmp_qspi_fill_tx_fifo(struct zynqmp_qspi_priv *priv, u32 size)
ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_TXFIFOEMPTY_MASK, 1,
GQSPI_TIMEOUT, 1);
- if (ret) {
- printf("%s: Timeout\n", __func__);
- return ret;
- }
+ if (ret)
+ return log_msg_ret("Timeout\n", ret);
priv->tx_buf += len;
return 0;
@@ -516,6 +511,9 @@ static void zynqmp_qspi_genfifo_cmd(struct zynqmp_qspi_priv *priv)
u32 gen_fifo_cmd;
u8 i, dummy_cycles, addr;
+ log_debug("%s, opcode: 0x%0X, addr.nbytes: %d, dummy.mbytes: %d\r\n",
+ __func__, op->cmd.opcode, op->addr.nbytes, op->dummy.nbytes);
+
/* Send opcode */
gen_fifo_cmd = zynqmp_qspi_bus_select(priv);
gen_fifo_cmd |= zynqmp_qspi_genfifo_mode(op->cmd.buswidth);
@@ -532,8 +530,6 @@ static void zynqmp_qspi_genfifo_cmd(struct zynqmp_qspi_priv *priv)
gen_fifo_cmd |= GQSPI_GFIFO_TX;
gen_fifo_cmd |= addr;
- debug("GFIFO_CMD_Cmd = 0x%x\n", gen_fifo_cmd);
-
zynqmp_qspi_fill_gen_fifo(priv, gen_fifo_cmd);
}
@@ -583,6 +579,8 @@ static int zynqmp_qspi_genfifo_fill_tx(struct zynqmp_qspi_priv *priv)
u32 len;
int ret = 0;
+ log_debug("%s, length: %d\r\n", __func__, priv->len);
+
gen_fifo_cmd = zynqmp_qspi_bus_select(priv);
gen_fifo_cmd |= zynqmp_qspi_genfifo_mode(priv->op->data.buswidth);
gen_fifo_cmd |= GQSPI_GFIFO_TX | GQSPI_GFIFO_DATA_XFR_MASK;
@@ -591,8 +589,6 @@ static int zynqmp_qspi_genfifo_fill_tx(struct zynqmp_qspi_priv *priv)
len = zynqmp_qspi_calc_exp(priv, &gen_fifo_cmd);
zynqmp_qspi_fill_gen_fifo(priv, gen_fifo_cmd);
- debug("GFIFO_CMD_TX:0x%x\n", gen_fifo_cmd);
-
if (gen_fifo_cmd & GQSPI_GFIFO_EXP_MASK)
ret = zynqmp_qspi_fill_tx_fifo(priv, 1 << len);
else
@@ -608,7 +604,6 @@ static int zynqmp_qspi_start_io(struct zynqmp_qspi_priv *priv,
u32 gen_fifo_cmd, u32 *buf)
{
u32 len;
- u32 actuallen = priv->len;
u32 config_reg, ier, isr;
u32 timeout = GQSPI_TIMEOUT;
struct zynqmp_qspi_regs *regs = priv->regs;
@@ -623,7 +618,7 @@ static int zynqmp_qspi_start_io(struct zynqmp_qspi_priv *priv,
else
priv->bytes_to_receive = len;
zynqmp_qspi_fill_gen_fifo(priv, gen_fifo_cmd);
- debug("GFIFO_CMD_RX:0x%x\n", gen_fifo_cmd);
+
/* Manual start */
config_reg = readl(&regs->confr);
config_reg |= GQSPI_STRT_GEN_FIFO;
@@ -652,13 +647,8 @@ static int zynqmp_qspi_start_io(struct zynqmp_qspi_priv *priv,
}
}
- debug("buf:0x%lx, rxbuf:0x%lx, *buf:0x%x len: 0x%x\n",
- (unsigned long)buf, (unsigned long)priv->rx_buf,
- *buf, actuallen);
- if (!timeout) {
- printf("IO timeout: %d\n", readl(&regs->isr));
- return -1;
- }
+ if (!timeout)
+ return log_msg_retz("Timeout\n", timeout);
}
return 0;
@@ -695,26 +685,18 @@ static int zynqmp_qspi_start_dma(struct zynqmp_qspi_priv *priv,
while (priv->len) {
zynqmp_qspi_calc_exp(priv, &gen_fifo_cmd);
zynqmp_qspi_fill_gen_fifo(priv, gen_fifo_cmd);
-
- debug("GFIFO_CMD_RX:0x%x\n", gen_fifo_cmd);
}
ret = wait_for_bit_le32(&dma_regs->dmaisr,
GQSPI_DMA_DST_I_STS_DONE, 1,
GQSPI_TIMEOUT, 1);
- if (ret) {
- printf("DMA Timeout:0x%x\n", readl(&dma_regs->dmaisr));
- return -ETIMEDOUT;
- }
+ if (ret)
+ return log_msg_ret("Timeout:\n", ret);
invalidate_dcache_range(addr, addr + size);
writel(GQSPI_DMA_DST_I_STS_DONE, &dma_regs->dmaisr);
- debug("buf:0x%lx, rxbuf:0x%lx, *buf:0x%x len: 0x%x\n",
- (unsigned long)buf, (unsigned long)priv->rx_buf, *buf,
- actuallen);
-
if (buf != priv->rx_buf)
memcpy(priv->rx_buf, buf, actuallen);
@@ -731,6 +713,8 @@ static int zynqmp_qspi_genfifo_fill_rx(struct zynqmp_qspi_priv *priv)
u32 *buf;
u32 actuallen = priv->len;
+ log_debug("%s, length: %d\r\n", __func__, priv->len);
+
gen_fifo_cmd = zynqmp_qspi_bus_select(priv);
gen_fifo_cmd |= zynqmp_qspi_genfifo_mode(priv->op->data.buswidth);
gen_fifo_cmd |= GQSPI_GFIFO_RX | GQSPI_GFIFO_DATA_XFR_MASK;