aboutsummaryrefslogtreecommitdiff
path: root/hw/i386/microvm.c
AgeCommit message (Collapse)AuthorFilesLines
12 dayshw/i386: Fix 'use-legacy-x86-rom' property compatibilityCédric Le Goater1-1/+1
Commit 350785d41d8b ("ramfb: Add property to control if load the romfile") introduced the `use-legacy-x86-rom` property for the `vfio-pci-nohotplug` device, allowing control over VGA BIOS ROM loading. However, the property compatibility setting was incorrectly applied to the `vfio-pci` device instead, which causes all `vfio-pci` devices to fail to load. This change fixes the issue by ensuring the property is set on the correct device. Fixes: d5fcf0d960d8 ("hw/i386: Add the ramfb romfile compatibility") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shaoqin Huang <shahuang@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://lore.kernel.org/qemu-devel/20250723062714.1245826-1-clg@redhat.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
2025-07-18hw/i386: Add the ramfb romfile compatibilityShaoqin Huang1-0/+3
ramfb is a sysbus device so it can only used for machine types where it is explicitly enabled: # git grep machine_class_allow_dynamic_sysbus_dev.*TYPE_RAMFB_DEVICE hw/arm/virt.c: machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); hw/i386/microvm.c: machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); hw/i386/pc_piix.c: machine_class_allow_dynamic_sysbus_dev(m, TYPE_RAMFB_DEVICE); hw/i386/pc_q35.c: machine_class_allow_dynamic_sysbus_dev(m, TYPE_RAMFB_DEVICE); hw/loongarch/virt.c: machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); hw/riscv/virt.c: machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); So these six are the only machine types we have to worry about. The three x86 machine types (pc, q35, microvm) will actually use the rom (when booting with seabios). For arm/riscv/loongarch virt we want to disable the rom. This patch sets ramfb romfile option to false by default, except for x86 machines types (pc, q35, microvm) which need the rom file when booting with seabios and machine types <= 10.0 (handling the case of arm virt, for compat reasons). At the same time, set the "use-legacy-x86-rom" property to true on those historical versioned machine types in order to avoid the memory layout being changed. Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shaoqin Huang <shahuang@redhat.com> Message-ID: <20250717100941.2230408-4-shahuang@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2025-04-25qom: Make InterfaceInfo[] uses constPhilippe Mathieu-Daudé1-1/+1
Mechanical change using: $ sed -i -E 's/\(InterfaceInfo.?\[/\(const InterfaceInfo\[/g' \ $(git grep -lE '\(InterfaceInfo.?\[\]\)') Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20250424194905.82506-7-philmd@linaro.org>
2025-04-25qom: Have class_init() take a const data argumentPhilippe Mathieu-Daudé1-1/+1
Mechanical change using gsed, then style manually adapted to pass checkpatch.pl script. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20250424194905.82506-4-philmd@linaro.org>
2025-02-21hw/i386/microvm: Fix crash that occurs when introspecting the microvm machineThomas Huth1-33/+33
QEMU currently crashes when you try to inspect the properties of the microvm machine: $ echo '{ "execute": "qmp_capabilities" } { "execute": "qom-list-properties","arguments": { "typename": "microvm-machine"}}' | \ ./qemu-system-x86_64 -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 9}, "package": "v9.2.0-1072-g60af367187-dirty"}, "capabilities": ["oob"]}} {"return": {}} qemu-system-x86_64: ../qemu/hw/i386/acpi-microvm.c:250: void acpi_setup_microvm(MicrovmMachineState *): Assertion `x86ms->fw_cfg' failed. Aborted (core dumped) This happens because the microvm machine adds a machine_done (and a powerdown_req) notifier in their instance_init function - however, the instance_init of machines are not only called for machines that are realized, but also for machines that are introspected, so in this case the listener is added for a microvm machine that is never realized. And since there is already a running machine, the listener function is triggered immediately, causing a crash since it was not for the right machine it was meant for. Such listener functions must never be installed from an instance_init function. Let's do it from microvm_machine_state_init() instead - this function is the MachineClass->init() function instead, i.e. guaranteed to be only called once in the lifetime of a QEMU process. Since the microvm_machine_done() and microvm_powerdown_req() were defined quite late in the microvm.c file, we have to move them now also earlier, so that we can get their function pointers from microvm_machine_state_init() without having to introduce a separate prototype for those functions earlier. Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20250123204708.1560305-1-thuth@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-12-30hw/pci-host/gpex: Allow more than 4 legacy IRQsAlexander Graf1-1/+1
Some boards such as vmapple don't do real legacy PCI IRQ swizzling. Instead, they just keep allocating more board IRQ lines for each new legacy IRQ. Let's support that mode by giving instantiators a new "nr_irqs" property they can use to support more than 4 legacy IRQ lines. In this mode, GPEX will export more IRQ lines, one for each device. Signed-off-by: Alexander Graf <graf@amazon.com> Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20241223221645.29911-9-phil@philjordan.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-12-20include: Rename sysemu/ -> system/Philippe Mathieu-Daudé1-5/+5
Headers in include/sysemu/ are not only related to system *emulation*, they are also used by virtualization. Rename as system/ which is clearer. Files renamed manually then mechanical change using sed tool. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Message-Id: <20241203172445.28576-1-philmd@linaro.org>
2024-10-31machine/nitro-enclave: New machine type for AWS Nitro EnclavesDorjoy Chowdhury1-1/+5
AWS nitro enclaves[1] is an Amazon EC2[2] feature that allows creating isolated execution environments, called enclaves, from Amazon EC2 instances which are used for processing highly sensitive data. Enclaves have no persistent storage and no external networking. The enclave VMs are based on the Firecracker microvm with a vhost-vsock device for communication with the parent EC2 instance that spawned it and a Nitro Secure Module (NSM) device for cryptographic attestation. The parent instance VM always has CID 3 while the enclave VM gets a dynamic CID. An EIF (Enclave Image Format)[3] file is used to boot an AWS nitro enclave virtual machine. This commit adds support for AWS nitro enclave emulation using a new machine type option '-M nitro-enclave'. This new machine type is based on the 'microvm' machine type, similar to how real nitro enclave VMs are based on Firecracker microvm. For nitro-enclave to boot from an EIF file, the kernel and ramdisk(s) are extracted into a temporary kernel and a temporary initrd file which are then hooked into the regular x86 boot mechanism along with the extracted cmdline. The EIF file path should be provided using the '-kernel' QEMU option. In QEMU, the vsock emulation for nitro enclave is added using vhost-user- vsock as opposed to vhost-vsock. vhost-vsock doesn't support sibling VM communication which is needed for nitro enclaves. So for the vsock communication to CID 3 to work, another process that does the vsock emulation in userspace must be run, for example, vhost-device-vsock[4] from rust-vmm, with necessary vsock communication support in another guest VM with CID 3. Using vhost-user-vsock also enables the possibility to implement some proxying support in the vhost-user-vsock daemon that will forward all the packets to the host machine instead of CID 3 so that users of nitro-enclave can run the necessary applications in their host machine instead of running another whole VM with CID 3. The following mandatory nitro-enclave machine option has been added related to the vhost-user-vsock device. - 'vsock': The chardev id from the '-chardev' option for the vhost-user-vsock device. AWS Nitro Enclaves have built-in Nitro Secure Module (NSM) device which has been added using the virtio-nsm device added in a previous commit. In Nitro Enclaves, all the PCRs start in a known zero state and the first 16 PCRs are locked from boot and reserved. The PCR0, PCR1, PCR2 and PCR8 contain the SHA384 hashes related to the EIF file used to boot the VM for validation. The following optional nitro-enclave machine options have been added related to the NSM device. - 'id': Enclave identifier, reflected in the module-id of the NSM device. If not provided, a default id will be set. - 'parent-role': Parent instance IAM role ARN, reflected in PCR3 of the NSM device. - 'parent-id': Parent instance identifier, reflected in PCR4 of the NSM device. [1] https://docs.aws.amazon.com/enclaves/latest/user/nitro-enclave.html [2] https://aws.amazon.com/ec2/ [3] https://github.com/aws/aws-nitro-enclaves-image-format [4] https://github.com/rust-vmm/vhost-device/tree/main/vhost-device-vsock Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Reviewed-by: Alexander Graf <graf@amazon.com> Link: https://lore.kernel.org/r/20241008211727.49088-6-dorjoychy111@gmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-03hw/char/serial.h: Extract serial-isa.hBernhard Beschow1-1/+1
The includes where updated based on compile errors. Now, the inclusion of the header roughly matches Kconfig dependencies: # grep -r -e "select SERIAL_ISA" hw/ppc/Kconfig: select SERIAL_ISA hw/isa/Kconfig: select SERIAL_ISA hw/sparc64/Kconfig: select SERIAL_ISA hw/i386/Kconfig: select SERIAL_ISA hw/i386/Kconfig: select SERIAL_ISA # for serial_hds_isa_init() Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Link: https://lore.kernel.org/r/20240905073832.16222-3-shentey@gmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-09-24reset: Use ResetType for qemu_devices_reset() and MachineClass::reset()Juraj Marcin1-2/+2
Currently, both qemu_devices_reset() and MachineClass::reset() use ShutdownCause for the reason of the reset. However, the Resettable interface uses ResetState, so ShutdownCause needs to be translated to ResetType somewhere. Translating it qemu_devices_reset() makes adding new reset types harder, as they cannot always be matched to a single ShutdownCause here, and devices may need to check the ResetType to determine what to reset and if to reset at all. This patch moves this translation up in the call stack to qemu_system_reset() and updates all MachineClass children to use the ResetType instead. Message-ID: <20240904103722.946194-2-jmarcin@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Juraj Marcin <jmarcin@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2024-07-03hw/i386/fw_cfg: Add etc/e820 to fw_cfg lateDavid Woodhouse1-2/+2
In e820_add_entry() the e820_table is reallocated with g_renew() to make space for a new entry. However, fw_cfg_arch_create() just uses the existing e820_table pointer. This leads to a use-after-free if anything adds a new entry after fw_cfg is set up. Shift the addition of the etc/e820 file to the machine done notifier, via a new fw_cfg_add_e820() function. Also make e820_table private and use an e820_get_table() accessor function for it, which sets a flag that will trigger an assert() for any *later* attempts to add to the table. Make e820_add_entry() return void, as most callers don't check for error anyway. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <a2708734f004b224f33d3b4824e9a5a262431568.camel@infradead.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-05-08hw/i386: Have x86_bios_rom_init() take X86MachineState rather than MachineStateBernhard Beschow1-1/+1
The function creates and leaks two MemoryRegion objects regarding the BIOS which will be moved into X86MachineState in the next steps to avoid the leakage. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240430150643.111976-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-27hw/i386/x86: Let ioapic_init_gsi() take parent as pointerBernhard Beschow1-1/+1
Rather than taking a QOM name which has to be resolved, let's pass the parent directly as pointer. This simplifies the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240224135851.100361-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-10-19hw/acpi: Realize ACPI_GED sysbus device before accessing itPhilippe Mathieu-Daudé1-1/+1
sysbus_mmio_map() should not be called on unrealized device. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231018141151.87466-7-philmd@linaro.org>
2023-10-04hw/i386: Remove now redundant TYPE_ACPI_GED_X86Bernhard Beschow1-1/+1
Now that TYPE_ACPI_GED_X86 doesn't assign AcpiDeviceIfClass::madt_cpu any more it is the same as TYPE_ACPI_GED. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230908084234.17642-6-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-08-31hw/i386: Rename 'hw/kvm/clock.h' -> 'hw/i386/kvm/clock.h'Philippe Mathieu-Daudé1-1/+1
kvmclock_create() is only implemented in hw/i386/kvm/clock.h. Restrict the "hw/kvm/clock.h" header to i386 by moving it to hw/i386/. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230620083228.88796-3-philmd@linaro.org>
2023-08-31hw/i386: Remove unuseful kvmclock_create() stubPhilippe Mathieu-Daudé1-1/+3
We shouldn't call kvmclock_create() when KVM is not available or disabled: - check for kvm_enabled() before calling it - assert KVM is enabled once called Since the call is elided when KVM is not available, we can remove the stub (it is never compiled). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230620083228.88796-2-philmd@linaro.org>
2023-06-09hw/i386/microvm: Simplify using object_dynamic_cast()Philippe Mathieu-Daudé1-2/+1
Use object_dynamic_cast() to determine if 'dev' is a TYPE_VIRTIO_MMIO. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-02Revert "hw/i386: pass RNG seed via setup_data entry"Michael S. Tsirkin1-1/+1
This reverts commit 67f7e426e53833a5db75b0d813e8d537b8a75bd2. Additionally to the automatic revert, I went over the code and dropped all mentions of legacy_no_rng_seed manually, effectively reverting a combination of 2 additional commits: commit ffe2d2382e5f1aae1abc4081af407905ef380311 Author: Jason A. Donenfeld <Jason@zx2c4.com> Date: Wed Sep 21 11:31:34 2022 +0200 x86: re-enable rng seeding via SetupData commit 3824e25db1a84fadc50b88dfbe27047aa2f7f85d Author: Gerd Hoffmann <kraxel@redhat.com> Date: Wed Aug 17 10:39:40 2022 +0200 x86: disable rng seeding via setup_data Fixes: 67f7e426e5 ("hw/i386: pass RNG seed via setup_data entry") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2023-03-02Revert "x86: don't let decompressed kernel image clobber setup_data"Michael S. Tsirkin1-10/+5
This reverts commit eac7a7791bb6d719233deed750034042318ffd56. Fixes: eac7a7791b ("x86: don't let decompressed kernel image clobber setup_data") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2023-02-27hw/rtc: Rename rtc_[get|set]_memory -> mc146818rtc_[get|set]_cmos_dataPhilippe Mathieu-Daudé1-11/+11
rtc_get_memory() and rtc_set_memory() helpers only work with TYPE_MC146818_RTC devices. 'memory' in their name refer to the CMOS region. Rename them as mc146818rtc_get_cmos_data() and mc146818rtc_set_cmos_data() to be explicit about what they are doing. Mechanical change doing: $ sed -i -e 's/rtc_set_memory/mc146818rtc_set_cmos_data/g' \ $(git grep -wl rtc_set_memory) $ sed -i -e 's/rtc_get_memory/mc146818rtc_get_cmos_data/g' \ $(git grep -wl rtc_get_memory) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230210233116.80311-4-philmd@linaro.org>
2023-02-27hw/rtc/mc146818rtc: Pass MC146818RtcState instead of ISADevice argumentPhilippe Mathieu-Daudé1-4/+2
rtc_get_memory() and rtc_set_memory() methods can not take any TYPE_ISA_DEVICE object. They expect a TYPE_MC146818_RTC one. Simplify the API by passing a MC146818RtcState. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230210233116.80311-3-philmd@linaro.org>
2023-02-27hw/isa: Rename isa_bus_irqs() -> isa_bus_register_input_irqs()Philippe Mathieu-Daudé1-1/+1
isa_bus_irqs() register an array of input IRQs on the ISA bus. Rename it as isa_bus_register_input_irqs(). Mechanical change using: $ sed -i -e 's/isa_bus_irqs/isa_bus_register_input_irqs/g' \ $(git grep -wl isa_bus_irqs) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230210163744.32182-10-philmd@linaro.org>
2023-01-28x86: don't let decompressed kernel image clobber setup_dataJason A. Donenfeld1-5/+10
The setup_data links are appended to the compressed kernel image. Since the kernel image is typically loaded at 0x100000, setup_data lives at `0x100000 + compressed_size`, which does not get relocated during the kernel's boot process. The kernel typically decompresses the image starting at address 0x1000000 (note: there's one more zero there than the compressed image above). This usually is fine for most kernels. However, if the compressed image is actually quite large, then setup_data will live at a `0x100000 + compressed_size` that extends into the decompressed zone at 0x1000000. In other words, if compressed_size is larger than `0x1000000 - 0x100000`, then the decompression step will clobber setup_data, resulting in crashes. Visually, what happens now is that QEMU appends setup_data to the kernel image: kernel image setup_data |--------------------------||----------------| 0x100000 0x100000+l1 0x100000+l1+l2 The problem is that this decompresses to 0x1000000 (one more zero). So if l1 is > (0x1000000-0x100000), then this winds up looking like: kernel image setup_data |--------------------------||----------------| 0x100000 0x100000+l1 0x100000+l1+l2 d e c o m p r e s s e d k e r n e l |-------------------------------------------------------------| 0x1000000 0x1000000+l3 The decompressed kernel seemingly overwriting the compressed kernel image isn't a problem, because that gets relocated to a higher address early on in the boot process, at the end of startup_64. setup_data, however, stays in the same place, since those links are self referential and nothing fixes them up. So the decompressed kernel clobbers it. Fix this by appending setup_data to the cmdline blob rather than the kernel image blob, which remains at a lower address that won't get clobbered. This could have been done by overwriting the initrd blob instead, but that poses big difficulties, such as no longer being able to use memory mapped files for initrd, hurting performance, and, more importantly, the initrd address calculation is hard coded in qboot, and it always grows down rather than up, which means lots of brittle semantics would have to be changed around, incurring more complexity. In contrast, using cmdline is simple and doesn't interfere with anything. The microvm machine has a gross hack where it fiddles with fw_cfg data after the fact. So this hack is updated to account for this appending, by reserving some bytes. Fixup-by: Michael S. Tsirkin <mst@redhat.com> Cc: x86@kernel.org Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-Id: <20221230220725.618763-1-Jason@zx2c4.com> Message-ID: <20230128061015-mutt-send-email-mst@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eric Biggers <ebiggers@google.com> Tested-by: Mathias Krause <minipli@grsecurity.net>
2022-11-02hw/i386/e820: remove legacy reserved entries for e820Ani Sinha1-2/+0
e820 reserved entries were used before the dynamic entries with fw config files were intoduced. Please see the following change: 7d67110f2d9a6("pc: add etc/e820 fw_cfg file") Identical support was introduced into seabios as well with the following commit: ce39bd4031820 ("Add support for etc/e820 fw_cfg file") Both the above commits are now quite old. QEMU machines 1.7 and newer no longer use the reserved entries. Seabios uses fw config files and dynamic e820 entries by default and only falls back to using reserved entries when it has to work with old qemu (versions earlier than 1.7). Please see functions qemu_cfg_e820() and qemu_early_e820(). It is safe to remove legacy FW_CFG_E820_TABLE and associated code now as QEMU 7.0 has deprecated i440fx machines 1.7 and older. It would be incredibly rare to run the latest qemu version with a very old version of seabios that did not support fw config files for e820. As far as I could see, edk2/ovfm never supported reserved entries and uses fw config files from the beginning. So there should be no incompatibilities with ovfm as well. CC: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220831045311.33083-1-ani@anisinha.ca> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-27reset: allow registering handlers that aren't called by snapshot loadingJason A. Donenfeld1-2/+2
Snapshot loading only expects to call deterministic handlers, not non-deterministic ones. So introduce a way of registering handlers that won't be called when reseting for snapshots. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-id: 20221025004327.568476-2-Jason@zx2c4.com [PMM: updated json doc comment with Markus' text; fixed checkpatch style nit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-18hyperv: fix SynIC SINT assertion failure on guest resetMaciej S. Szmigiero1-3/+1
Resetting a guest that has Hyper-V VMBus support enabled triggers a QEMU assertion failure: hw/hyperv/hyperv.c:131: synic_reset: Assertion `QLIST_EMPTY(&synic->sint_routes)' failed. This happens both on normal guest reboot or when using "system_reset" HMP command. The failing assertion was introduced by commit 64ddecc88bcf ("hyperv: SControl is optional to enable SynIc") to catch dangling SINT routes on SynIC reset. The root cause of this problem is that the SynIC itself is reset before devices using SINT routes have chance to clean up these routes. Since there seems to be no existing mechanism to force reset callbacks (or methods) to be executed in specific order let's use a similar method that is already used to reset another interrupt controller (APIC) after devices have been reset - by invoking the SynIC reset from the machine reset handler via a new x86_cpu_after_reset() function co-located with the existing x86_cpu_reset() in target/i386/cpu.c. Opportunistically move the APIC reset handler there, too. Fixes: 64ddecc88bcf ("hyperv: SControl is optional to enable SynIc") # exposed the bug Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <cb57cee2e29b20d06f81dce054cbcea8b5d497e8.1664552976.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-27x86: re-enable rng seeding via SetupDataJason A. Donenfeld1-1/+1
This reverts 3824e25db1 ("x86: disable rng seeding via setup_data"), but for 7.2 rather than 7.1, now that modifying setup_data is safe to do. Cc: Laurent Vivier <laurent@vivier.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ard Biesheuvel <ardb@kernel.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-Id: <20220921093134.2936487-4-Jason@zx2c4.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-17x86: disable rng seeding via setup_dataGerd Hoffmann1-1/+1
Causes regressions when doing direct kernel boots with OVMF. At this point in the release cycle the only sensible action is to just disable this for 7.1 and sort it properly in the 7.2 devel cycle. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220817083940.3174933-1-kraxel@redhat.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-07-22hw/i386: pass RNG seed via setup_data entryJason A. Donenfeld1-1/+1
Tiny machines optimized for fast boot time generally don't use EFI, which means a random seed has to be supplied some other way. For this purpose, Linux (≥5.20) supports passing a seed in the setup_data table with SETUP_RNG_SEED, specially intended for hypervisors, kexec, and specialized bootloaders. The linked commit shows the upstream kernel implementation. At Paolo's request, we don't pass these to versioned machine types ≤7.0. Link: https://git.kernel.org/tip/tip/c/68b8e9713c8 Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-Id: <20220721125636.446842-1-Jason@zx2c4.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-19microvm: turn off io reservations for pcie root portsGerd Hoffmann1-0/+11
The pcie host bridge has no io window on microvm, so io reservations will not work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220701091516.43489-1-kraxel@redhat.com>
2022-05-16hw/i386: Make pic a property of common x86 base machine typeXiaoyao Li1-26/+1
Legacy PIC (8259) cannot be supported for TDX guests since TDX module doesn't allow directly interrupt injection. Using posted interrupts for the PIC is not a viable option as the guest BIOS/kernel will not do EOI for PIC IRQs, i.e. will leave the vIRR bit set. Make PIC the property of common x86 machine type. Hence all x86 machines, including microvm, can disable it. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-Id: <20220310122811.807794-3-xiaoyao.li@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16hw/i386: Make pit a property of common x86 base machine typeXiaoyao Li1-26/+1
Both pc and microvm have pit property individually. Let's just make it the property of common x86 base machine type. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-Id: <20220310122811.807794-2-xiaoyao.li@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-03Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingRichard Henderson1-1/+4
* Build system fixes and cleanups * DMA support in the multiboot option ROM * Rename default-bus-bypass-iommu * Deprecate -watchdog and cleanup -watchdog-action * HVF fix for <PAGE_SIZE regions * Support TSC scaling for AMD nested virtualization * Fix for ESP fuzzing bug # gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] * remotes/bonzini/tags/for-upstream: (27 commits) configure: fix --audio-drv-list help message configure: Remove the check for the __thread keyword Move the l2tpv3 test from configure to meson.build meson: remove unnecessary coreaudio test program meson: remove pointless warnings meson.build: Allow to disable OSS again meson: bump submodule to 0.59.3 qtest/am53c974-test: add test for cancelling in-flight requests esp: ensure in-flight SCSI requests are always cancelled KVM: SVM: add migration support for nested TSC scaling hw/i386: fix vmmouse registration watchdog: remove select_watchdog_action vl: deprecate -watchdog watchdog: add information from -watchdog help to -device help hw/i386: Rename default_bus_bypass_iommu hvf: Avoid mapping regions < PAGE_SIZE as ram configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS configure: remove useless NPTL probe target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types optionrom: add a DMA-enabled multiboot ROM ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02microvm: add device tree support.Gerd Hoffmann1-0/+2
Allows edk2 detect virtio-mmio devices and pcie ecam. See comment in hw/i386/microvm-dt.c for more details. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-Id: <20211014193617.2475578-1-kraxel@redhat.com>
2021-11-02target/i386: move linuxboot_dma_enabled to X86MachineStatePaolo Bonzini1-1/+4
This removes a parameter from x86_load_linux, and will avoid code duplication between the linux and multiboot cases once multiboot starts to support DMA. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-26microvm: Drop dead error handling in microvm_machine_state_init()Markus Armbruster1-5/+0
Stillborn in commit 0ebf007dda "hw/i386: Introduce the microvm machine type". Cc: Sergio Lopez <slp@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210720125408.387910-12-armbru@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth1-1/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-22acpi: Move setters/getters of oem fields to X86MachineStateMarian Postevca1-66/+0
The code that sets/gets oem fields is duplicated in both PC and MICROVM variants. This commit moves it to X86MachineState so that all x86 variants can use it and duplication is removed. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210221001737.24499-2-posteuca@mutex.one> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-05acpi: use constants as strncpy limitMichael S. Tsirkin1-2/+2
gcc is not smart enough to figure out length was validated before use as strncpy limit, resulting in this warning: inlined from ‘virt_set_oem_table_id’ at ../../hw/arm/virt.c:2197:5: /usr/include/aarch64-linux-gnu/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=] Simplify things by using a constant limit instead. Fixes: 97fc5d507fca ("acpi: Permit OEM ID and OEM table ID fields to be changed") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-05acpi: Permit OEM ID and OEM table ID fields to be changedMarian Postevca1-0/+66
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI table name. Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID and OEM table ID for the strings "BOCHS" and "BXPC" and if they are found, the game crashes(this may be an intentional detection mechanism to prevent playing the game in a virtualized environment). This patch allows you to override these default values. The feature can be used in this manner: qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN The oem-id string can be up to 6 bytes in size, and the oem-table-id string can be up to 8 bytes in size. If the string are smaller than their respective sizes they will be padded with space. If either of these parameters is not set, the current default values will be used for the one missing. Note that the the OEM Table ID field will not be extended with the name of the table, but will use either the default name or the user provided one. This does not affect the -acpitable option (for user-defined ACPI tables), which has precedence over -machine option. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210119003216.17637-3-posteuca@mutex.one> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-16i386: move kvm accel files into kvm/Claudio Fontana1-1/+1
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201212155530.23098-2-cfontana@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10i386: remove bios_namePaolo Bonzini1-4/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20201026143028.3034018-6-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10microvm: add second ioapicGerd Hoffmann1-5/+51
Create second ioapic, route virtio-mmio IRQs to it, allow more virtio-mmio devices (24 instead of 8). Needs ACPI, enabled by default, can be turned off using -machine ioapic2=off Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20201203105423.10431-8-kraxel@redhat.com
2020-12-10microvm: drop microvm_gsi_handler()Gerd Hoffmann1-13/+1
With the improved gsi_handler() we don't need our private version any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20201203105423.10431-7-kraxel@redhat.com
2020-12-10microvm: make pcie irq base runtime changeableGerd Hoffmann1-5/+6
Allows to move them in case we have enough irq lines available. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20201203105423.10431-6-kraxel@redhat.com
2020-12-10microvm: make number of virtio transports runtime changeableGerd Hoffmann1-2/+7
This will allow to increase the number of transports in case we have enough irq lines available for them all. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20201203105423.10431-5-kraxel@redhat.com
2020-10-21microvm: add usb supportGerd Hoffmann1-0/+13
Wire up "usb=on" machine option, when enabled add a sysbus xhci controller with 8 ports. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20201020074844.5304-6-kraxel@redhat.com
2020-10-21microvm: set pci_irq_maskGerd Hoffmann1-0/+6
Makes sure the PCI interrupt overrides are added to the APIC table in case PCIe is enabled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20201016113835.17465-5-kraxel@redhat.com
2020-10-14i386/kvm: Delete kvm_allows_irq0_override()Eduardo Habkost1-1/+1
As IRQ routing is always available on x86, kvm_allows_irq0_override() will always return true, so we don't need the function anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200922201922.2153598-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.1 at 2025-08-09 14:50:23 +0000