aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi/generic_event_device.c
AgeCommit message (Collapse)AuthorFilesLines
2025-07-15hw/acpi/ged: Support migration of AcpiPciHpStateEric Auger1-0/+20
Add a subsection to migrate the AcpiPciHpState state. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Prasad Pandit <pjp@fedoraproject.org> Message-Id: <20250714080639.2525563-30-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Prepare the device to react to PCI hotplug eventsEric Auger1-0/+35
QEMU will notify the OS about PCI hotplug/hotunplug events through GED interrupts. Let the GED device handle a new PCI hotplug event. On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK mutex held. The GED device uses a dedicated MMIO region that will be mapped by the machine code. At this point the GED still does not support PCI device hotplug in its TYPE_HOTPLUG_HANDLER implementation. This will come in a subsequent patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Call pcihp plug callbacks in hotplug handler implementationEric Auger1-0/+17
Add PCI device related code in the TYPE_HOTPLUG_HANDLER implementation. For a PCI device hotplug/hotunplug event, the code routes to acpi_pcihp_device callbacks (pre_plug_cb, plug_cb, unplug_request_cb, unplug_cb). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-27-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Add a bus link propertyEric Auger1-0/+3
This property will be set by the machine code on the object creation. It will be used by acpi pcihp hotplug code. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Message-Id: <20250714080639.2525563-25-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-07-15hw/acpi/ged: Add a acpi-pci-hotplug-with-bridge-support propertyEric Auger1-0/+2
A new boolean property is introduced. This will be used to turn ACPI PCI hotplug support. By default it is unset. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20250714080639.2525563-7-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2025-05-08hw/acpi/ged: Fix wrong identationEric Auger1-5/+5
Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org> Message-ID: <20250428102628.378046-3-eric.auger@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2025-04-25qom: Make InterfaceInfo[] uses constPhilippe Mathieu-Daudé1-1/+1
Mechanical change using: $ sed -i -E 's/\(InterfaceInfo.?\[/\(const InterfaceInfo\[/g' \ $(git grep -lE '\(InterfaceInfo.?\[\]\)') Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20250424194905.82506-7-philmd@linaro.org>
2025-04-25qom: Have class_init() take a const data argumentPhilippe Mathieu-Daudé1-1/+1
Mechanical change using gsed, then style manually adapted to pass checkpatch.pl script. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20250424194905.82506-4-philmd@linaro.org>
2025-01-15acpi/ghes: better name the offset of the hardware error firmwareMauro Carvalho Chehab1-2/+2
The hardware error firmware is where HEST error structures are stored. Those can be GHESv2, but they can also be other types. Better name the location of the hardware error. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <ddbb94294bafee998f12fede3ba0b05dae5ee45f.1736945236.git.mchehab+huawei@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-12-21Merge tag 'exec-20241220' of https://github.com/philmd/qemu into stagingStefan Hajnoczi1-1/+1
Accel & Exec patch queue - Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander) - Add '-d invalid_mem' logging option (Zoltan) - Create QOM containers explicitly (Peter) - Rename sysemu/ -> system/ (Philippe) - Re-orderning of include/exec/ headers (Philippe) Move a lot of declarations from these legacy mixed bag headers: . "exec/cpu-all.h" . "exec/cpu-common.h" . "exec/cpu-defs.h" . "exec/exec-all.h" . "exec/translate-all" to these more specific ones: . "exec/page-protection.h" . "exec/translation-block.h" . "user/cpu_loop.h" . "user/guest-host.h" . "user/page-protection.h" # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t # wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt # KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K # A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8 # 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe/// # 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r # xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl # VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay # ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP # 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd # +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6 # x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo= # =cjz8 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 20 Dec 2024 11:45:20 EST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits) util/qemu-timer: fix indentation meson: Do not define CONFIG_DEVICES on user emulation system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header system/numa: Remove unnecessary 'exec/cpu-common.h' header hw/xen: Remove unnecessary 'exec/cpu-common.h' header target/mips: Drop left-over comment about Jazz machine target/mips: Remove tswap() calls in semihosting uhi_fstat_cb() target/xtensa: Remove tswap() calls in semihosting simcall() helper accel/tcg: Un-inline translator_is_same_page() accel/tcg: Include missing 'exec/translation-block.h' header accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h' accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h' qemu/coroutine: Include missing 'qemu/atomic.h' header exec/translation-block: Include missing 'qemu/atomic.h' header accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h' exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined target/sparc: Move sparc_restore_state_to_opc() to cpu.c target/sparc: Uninline cpu_get_tb_cpu_state() target/loongarch: Declare loongarch_cpu_dump_state() locally user: Move various declarations out of 'exec/exec-all.h' ... Conflicts: hw/char/riscv_htif.c hw/intc/riscv_aplic.c target/s390x/cpu.c Apply sysemu header path changes to not in the pull request. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2024-12-20include: Rename sysemu/ -> system/Philippe Mathieu-Daudé1-1/+1
Headers in include/sysemu/ are not only related to system *emulation*, they are also used by virtualization. Rename as system/ which is clearer. Files renamed manually then mechanical change using sed tool. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Message-Id: <20241203172445.28576-1-philmd@linaro.org>
2024-12-19include/hw/qdev-properties: Remove DEFINE_PROP_END_OF_LISTRichard Henderson1-1/+0
Now that all of the Property arrays are counted, we can remove the terminator object from each array. Update the assertions in device_class_set_props to match. With struct Property being 88 bytes, this was a rather large form of terminator. Saves 30k from qemu-system-aarch64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-12-15hw/acpi: Constify all PropertyRichard Henderson1-1/+1
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-11-04hw/acpi: Update GED with vCPU Hotplug VMSD for migrationSalil Mehta1-0/+19
The ACPI CPU hotplug states must be migrated along with other vCPU hotplug states to the destination VM. Update the GED's VM State Description (VMSD) table subsection to conditionally include the CPU Hotplug VM State Description (VMSD). Excerpt of GED VMSD State Dump at Source: "acpi-ged (16)": { "ged_state": { "sel": "0x00000000" }, [...] "acpi-ged/cpuhp": { "cpuhp_state": { "selector": "0x00000005", "command": "0x00", "devs": [ { "is_inserting": false, "is_removing": false, "ost_event": "0x00000000", "ost_status": "0x00000000" }, [...] { "is_inserting": false, "is_removing": false, "ost_event": "0x00000000", "ost_status": "0x00000000" } ] } } }, Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Message-Id: <20241103102419.202225-6-salil.mehta@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-10-16acpi: ged: Add macro for acpi sleep control registerBibo Mao1-3/+3
Macro definition is added for acpi sleep control register, ged emulation driver can use the macro , also it can be used in FDT table if ged is exposed with FDT table. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn>
2024-07-22hw/acpi: Update GED _EVT method AML with CPU scanSalil Mehta1-0/+3
OSPM evaluates _EVT method to map the event. The CPU hotplug event eventually results in start of the CPU scan. Scan figures out the CPU and the kind of event(plug/unplug) and notifies it back to the guest. Update the GED AML _EVT method with the call to method \\_SB.CPUS.CSCN (via \\_SB.GED.CSCN) Architecture specific code [1] might initialize its CPUs AML code by calling common function build_cpus_aml() like below for ARM: build_cpus_aml(scope, ms, opts, xx_madt_cpu_entry, memmap[VIRT_CPUHP_ACPI].base, "\\_SB", "\\_SB.GED.CSCN", AML_SYSTEM_MEMORY); [1] https://lore.kernel.org/qemu-devel/20240613233639.202896-13-salil.mehta@huawei.com/ Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> Tested-by: Xianglai Li <lixianglai@loongson.cn> Tested-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Tested-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20240716111502.202344-5-salil.mehta@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-22hw/acpi: Update ACPI GED framework to support vCPU HotplugSalil Mehta1-0/+47
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the _CRS object of GED to intimate OSPM about an event. Later then demultiplexes the notified event by evaluating ACPI _EVT method to know the type of event. Use ACPI GED to also notify the guest kernel about any CPU hot(un)plug events. Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM hotplug and non-hotplug events like system power down event. Each of these can be selected using a bit in the 32 bit GED IO interface. A bit has been reserved for the CPU hotplug event. ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG support has been enabled for particular architecture. Add cpu_hotplug_hw_init() stub to avoid compilation break. Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> Tested-by: Xianglai Li <lixianglai@loongson.cn> Tested-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> Tested-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com>
2023-12-29hw/acpi: Constify VMStateRichard Henderson1-6/+6
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-22-richard.henderson@linaro.org>
2022-09-22hw/acpi: Add ospm_status hook implementation for acpi-gedKeqian Zhu1-0/+8
Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status" causes segmentation fault with following dumpstack: #1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312 #2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63 #3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128 #4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150 #5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178 #6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421 #7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320 #8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0 #9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297 #10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320 #11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596 #12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734 #13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38 #14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47 Fixes: ebb62075021a ("hw/acpi: Add ACPI Generic Event Device Support") Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-03acpi/ged: fix reset causeGerd Hoffmann1-1/+1
Reset requests should use SHUTDOWN_CAUSE_GUEST_RESET not SHUTDOWN_CAUSE_GUEST_SHUTDOWN. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210624110057.2398779-1-kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-12ACPI: Avoid infinite recursion when dump-vmstatePeng Liang1-1/+11
There is a field with vmstate_ghes_state as vmsd in vmstate_ghes_state, which will lead to infinite recursion in dump_vmstate_vmsd. Fixes: a08a64627b ("ACPI: Record the Generic Error Status Block address") Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Peng Liang <liangpeng10@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201112020638.874515-1-liangpeng10@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-17acpi: move acpi_dsdt_add_power_button() to gedGerd Hoffmann1-0/+8
Allow reuse for microvm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-17acpi: ged: add control regsGerd Hoffmann1-0/+44
Add control regs (sleep, reset) for hw-reduced acpi. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-5-kraxel@redhat.com
2020-06-23arm/virt: Add memory hot remove supportShameer Kolothum1-0/+29
This adds support for memory(pc-dimm) hot remove on arm/virt that uses acpi ged device. NVDIMM hot removal is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-12acpi: ged: rename event memory regionGerd Hoffmann1-8/+8
Rename memory region and callbacks and ops to carry "evt" in the name because a second region will be added shortly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200520132003.9492-10-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedow <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-14ACPI: Record the Generic Error Status Block addressDongjiu Geng1-0/+19
Record the GHEB address via fw_cfg file, when recording a error to CPER, it will use this address to find out Generic Error Data Entries and write the error. In order to avoid migration failure, make hardware error table address to a part of GED device instead of global variable, then this address will be migrated to target QEMU. Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm/virt: Add nvdimm hotplug supportShameer Kolothum1-1/+14
This adds support for nvdimm hotplug events through GED and enables nvdimm for the arm/virt. Now Guests with ACPI can have both cold and hot plug of nvdimms. Hot removal functionality is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-27Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-1/+1
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-23hw/acpi: Remove extra indent in ACPI GED hotplug cbKeqian Zhu1-1/+1
There is extra indent in ACPI GED hotplug cb that should be deleted. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-id: 20200120012755.44581-2-zhukeqian1@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-05hw/arm: Use GED for system_powerdown eventShameer Kolothum1-0/+8
For machines 4.2 or higher with ACPI boot use GED for system_powerdown event instead of GPIO. Guest boot with DT still uses GPIO. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-9-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05hw/acpi: Add ACPI Generic Event Device SupportSamuel Ortiz1-0/+303
The ACPI Generic Event Device (GED) is a hardware-reduced specific device[ACPI v6.1 Section 5.6.9] that handles all platform events, including the hotplug ones. This patch generates the AML code that defines GEDs. Platforms need to specify their own GED Event bitmap to describe what kind of events they want to support through GED. Also this uses a a single interrupt for the GED device, relying on IO memory region to communicate the type of device affected by the interrupt. This way, we can support up to 32 events with a unique interrupt. This supports only memory hotplug for now. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20190918130633.4872-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
generated by cgit v1.1 at 2025-08-09 10:01:23 +0000