This reverts commit 46774df3.

Needed at least for -DLLVM_ENABLE_MODULES=On.

On Darwin, we want to limit the parallelism during test execution for
sanitizer tests that use shadow memory.  The reason is explained by this
existing comment:

> Only run up to 3 processes that require shadow memory simultaneously
> on 64-bit Darwin. Using more scales badly and hogs the system due to
> inefficient handling of large mmap'd regions (terabytes) by the
> kernel.

Previously we detected 3 cases:
* on-device: limit to 1 process
* 64-bit: macOS & simulators, limit to 3 processes
* others (32-bit): no limitation

We checked for the 64-bit case like this: `if arch in ['x86_64',
'x86_64h']` which misses macOS running on AS. Additionally, we don't
care about 32-bit anymore, so I've simplified this to 2 cases: on-device
and everything else.

Differential Revision: https://reviews.llvm.org/D122751

Protecting against accidental overwriting of commands is good, but
having to pass a flag to overwrite the command when developing your
commands is pretty annoying.  This adds a setting to defeat the protection
so you can do this once at the start of your session and not have to
worry about it again.

Differential Revision: https://reviews.llvm.org/D122680

Otherwise we may crash because the special member has not been sufficiently set
up yet. Fixes https://github.com/llvm/llvm-project/issues/54537

Differential Revision: https://reviews.llvm.org/D122846

Avoid using getPointerSize and pass through the original value type.

Applied modernize-use-equals-default clang-tidy check over LLDB.

This check is already present in the lldb/.clang-tidy config.

Differential Revision: https://reviews.llvm.org/D121844

To store a byval parameter the existing code would store as many 8 byte elements
as was required to store the full size of the byval parameter.
For example, a paramter of size 16 would store two element of 8 bytes.
A paramter of size 12 would also store two elements of 8 bytes.
This would sometimes store too many bytes as the size of the paramter is not
always a factor of 8.

This patch fixes that issue and now byval paramters are stored with the correct
number of bytes.

Reviewed By: nemanjai, #powerpc, quinnp, amyk

Differential Revision: https://reviews.llvm.org/D121430

(Orignal phab: https://reviews.llvm.org/D116787)

Re-introduce a fully qualified type on teh fir.freemem operation.
Since this is the only operation where the prefix gets elided in fir, this
patch make it fully qualified so the dialect syntax feels more consistent.

Reviewed By: vdonaldson

Differential Revision: https://reviews.llvm.org/D122839

Check that the function will be emitted in the final binary. Preserving
old function address is needed in case it is PLT trampiline, that is
currently not moved by the BOLT.

Differential Revision: https://reviews.llvm.org/D122098

BOLT treats aarch64 objects located in text as empty functions with
contant islands. Emit them with at least 8-byte alignment to the new
text section.

Vladislav Khmelevsky,
Advanced Software Technology Lab, Huawei

Differential Revision: https://reviews.llvm.org/D122097

[llvm-readobj] Fix forward build breakages caused by https://reviews.llvm.org/rG33b3c86afab06ad61d46456c85c0b565cfff8287

Change: use std::function instead of function_ref because it's not safe to store a function_ref

(original phab: https://reviews.llvm.org/D116787)

This avoids accidentally reversing the order of constants during successive
application, e.g. when running the canonicalizer. This helps reduce the number
of iterations, and also avoids unnecessary changes to input IR.

Fixes #51892

Differential Revision: https://reviews.llvm.org/D122692

Add a compiler option and the instructions required to set the
special Data Stream Control Register (DSCR). The special register will
not be set by default.

Original patch by: Muhammad Usman

Reviewed By: nemanjai, #powerpc

Differential Revision: https://reviews.llvm.org/D117013

Note of the functions was marked as _LIBCPP_HIDE_FROM_ABI.

Did some minor formatting fixes to keep consistency. To keep it easy to
review not all odd formatting has been fixed.

Reviewed By: ldionne, #libc

Differential Revision: https://reviews.llvm.org/D122834

Reland  "[llvm-readobj][MachO] Add option to sort the symbol table before dumping (MachO only, for now)."
    https://reviews.llvm.org/D116787

This reverts commit 33b3c86a.

New change: fixed build failures:
 - in stabs-sorted:restore the the ERR-KEY statements, which were accidentally deleted during refactoring
 - in ObjDumper.h/MachODumper.cpp: refactor so that current dumpers which didn't provide an impl that accept a SymCom still works

This reverts commit b50893db.

Post-commit review pointed out that adding this file will require the
entire Python tree (including out-of-tree projects) to come from the
same directory, which might be problematic in non-default installations.
Reverting pending further discussion.

This reverts commit 8378a71b.

It looks like this patch uncovered another issue, e.g. see
https://lab.llvm.org/buildbot/#/builders/168/builds/5518

Just some code clean up.

Reviewed By: #lld-macho, int3

Differential Revision: https://reviews.llvm.org/D122752

A significant number of our tests in C accidentally use functions
without prototypes. This patch converts the function signatures to have
a prototype for the situations where the test is not specific to K&R C
declarations. e.g.,

  void func();

becomes

  void func(void);

Reimplements MisExpect diagnostics from D66324 to reconstruct its
original checking methodology only using MD_prof branch_weights
metadata.

New checks rely on 2 invariants:

1) For frontend instrumentation, MD_prof branch_weights will always be
   populated before llvm.expect intrinsics are lowered.

2) for IR and sample profiling, llvm.expect intrinsics will always be
   lowered before branch_weights are populated from the IR profiles.

These invariants allow the checking to assume how the existing branch
weights are populated depending on the profiling method used, and emit
the correct diagnostics. If these invariants are ever invalidated, the
MisExpect related checks would need to be updated, potentially by
re-introducing MD_misexpect metadata, and ensuring it always will be
transformed the same way as branch_weights in other optimization passes.

Frontend based profiling is now enabled without using LLVM Args, by
introducing a new CodeGen option, and checking if the -Wmisexpect flag
has been passed on the command line.

Reviewed By: tejohnson

Differential Revision: https://reviews.llvm.org/D115907

Latest OpenMP spec says parallel_data is NULL for initial/implicit-task-end.
We nevertheless need to cleanup the ParallelData here, as there is no other
callback for the end of the implicit parallel region. We can use the reference
stored in the TaskData.

Reviewed By: dreachem

Differential Revision: https://reviews.llvm.org/D114005

Whenever a v_cmp, s_and_saveexec instruction sequence shall be
transformed to an equivalent s_mov, v_cmpx sequence, it needs
to be detected if the v_cmp target register is used between
the two instructions as the v_cmp result gets omitted by
using the v_cmpx instruction, resulting in invalid code.

Reviewed By: foad

Differential Revision: https://reviews.llvm.org/D122797

lowerV64I8Shuffle has been extended a lot since this was added.

Shuffle combining will still lower to this with better fast cross lane checks.

Noticed while triaging Issue #54658

Bubble up extract_slice above Linalg operation.

A sequence of operations

    %0 = linalg.<op> ... arg0, arg1, ...
    %1 = tensor.extract_slice %0 ...

can be replaced with

    %0 = tensor.extract_slice %arg0
    %1 = tensor.extract_slice %arg1
    %2 = linalg.<op> ... %0, %1, ...

This results in the reduce computation of the linalg operation.

The implementation uses the tiling utility functions. One difference
from the tiling process is that we don't need to insert the checking
code for the out-of-bound accesses. The use of the slice itself
represents that the code writer is sure about the boundary condition.
To avoid adding the boundary condtion check code, `omitPartialTileCheck`
is introduced for the tiling utility functions.

Differential Revision: https://reviews.llvm.org/D122437

This adds diagnostics for conflicting attributes on the same
declarataion, conflicting attributes on a forward and final
declaration, and defines a more narrowly scoped HLSLEntry attribute
target.

Big shout out to @aaron.ballman for the great feedback and review on
this!

Differential Revision: https://reviews.llvm.org/D122803

Differential Revision: https://reviews.llvm.org/D122818