Add a label property to allow a custom name to be used for identifying
a device on the board. This is useful when multiple devices are present on
the same board. Similar change was done by commit ffae65fb


("dt-bindings: spi: spi-cadence: Add label property") or by commit
a53faa6bfa3b ("dt-bindings: hwmon: ina2xx: Add label property").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Schemas need "unevaluatedProperties" or "additionalProperties" to be
false in order to disallow undefined properties. Only common or
otherwise incomplete schemas should allow undefined properties.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable COMPILE_TEST for the vf610 gpio driver to support test builds on
systems without this hardware.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The vf610 gpio driver is enabled by default for all i.MX machines,
without any option to disable it in a board-specific config file.

Most i.MX chipsets have no hardware for this driver. Change the default
to enable GPIO_VF610 for SOC_VF610 and disable it otherwise.

Add a text description after the bool type, this makes the driver
selectable by make config etc.

Fixes: 30a35c07

 ("gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Document support for GPIO controller blocks in the Renesas R-Car V4M
(R8A779H0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

If a GPIO driver returns a positive integer from one of the direction
setter callbacks, we'll end up propagating it to user-space. Whether we
should sanitize the values returned by callbacks is a different question
but let's first improve the documentation and fortify the contract with
GPIO providers.

Reported-by: José Guilherme de Castro Rodrigues <joseguilhermebh@hotmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>

There are no external users for the irq domain helpers so unexport them
and remove the prototypes from the driver header.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The locking wrappers were replaces with lock guards. These typedefs are
no longer needed.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>

The existing uAPI documentation does not adequately describe how the kernel
handles the case where the underlying hardware or driver does not support
the requested configuration.

Add a Configuration Support section describing that behaviour to both the
v1 and v2 documentation, and better document the errors returned where the
requested configuration cannot be supported.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add Documentation/userspace-api/gpio/ to the GPIO UAPI section.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The num_eics is a default value, but some SoCs support more than 8.
In order to adapt to all projects, the total number of eics is
automatically calculated through dts.

Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The gpio-mockup has been obsoleted by the gpio-sim, so relocate its
documentation into the obsolete section of the admin-guide book.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Update the gpio-mockup documentation to note that is has been
obsoleted by the gpio-sim.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Capitalise the title of the GPIO documentation page to match other
subsystems.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add documentation for v1 of the GPIO character device userspace API
to the obsolete section of both the admin-guide and userspace-api
books.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Update GPIO sysfs interface documentation to reference the new
chardev document rather than gpio.h.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The GPIO sysfs API is long obsolete, so highlight this even further
by moving it into an obsolete APIs section in both the admin-guide
and userspace-api books.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Update the sysfs-gpio interface document to refer to the gpio-cdev
interface that obsoletes it.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Update the gpio-cdev interface document to refer to the new
chardev.rst.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add documentation for the GPIO character device userspace API.

Added to the userspace-api book, but also provide a link from the
admin-guide book, as historically the GPIO documentation has been
there.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The documentation contains notes like
 This struct is part of ABI v1 and is deprecated.
 Use struct gpio_v2_line_info instead.

This could be interpreted to mean the structs can be directly
substituted in v1 calls.  Clarify that the user should use the
corresponding v2 ioctl() and structs.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Clarify the possible values of event id, rather than requiring the
reader to infer.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Make documentation more consistent by using trailing periods only for
multi-sentence field descriptions, not single sentence descriptions.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The full name of the HTE subsystem is "hardware timestamping engine",
so correct references and highlight that this refers to the HTE
subsystem.

Extend the description of struct gpio_v2_line_event to clarify that
the timestamp_ns is sourced from the HTE if the
GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE is set.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Only a successful operation modifies fd fields, but the current
documentation wording could be taken to imply that a positive fd
value after an ioctl() returns indicates a success.

Reword documentation to clarify that the fd is only valid after a
successful operation.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

We've recently had someone try to use of_get_named_gpio() in new code.
Mark legacy interfaces as deprecated in kernel docs to avoid any
confusion.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>