- Oct 03, 2017
-
-
Dick Kennedy authored
Change version to 11.4.0.4 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
The internal cfg flag is actually smaller, by 1 (for a partial page sge), than the sg list maintained by the driver. Thus the check on sg segments errored out when it shouldn't have Ensure the check is +1 Note: having a value that is less than what it really is is bogus. Correcting it now would be a significant rework. Add this item to the list to be refactored in the merge with efct. Signed-off-by:
-
Dick Kennedy authored
When running NVME io as a NVME host, if the driver is unloaded there would be oops in lpfc_sli4_issue_wqe. When unloading, controllers are torn down and the transport initiates set_property commands to reset the controller and issues aborts to terminate existing io. The drivers nvme abort and fcp io submit routines needed to recognize the driver is unloading and fail the new requests. It didn't, resulting in the oops. Revise the ls and fcp io submit routines to detect the unloading state and properly handle their cleanup. Signed-off-by:
-
Dick Kennedy authored
Support RDP and Multiple Frames If the remote Nport is not logged in, the driver would not populate all the descriptors in the RDP response payload. Doing so would create a payload length that requires multiple frames due to exceeding the default rx buffer size without an explicit login. Currently FC-LS explicitly states the RDP response must be a single frame sequence. Thus we did not violate the standard. Recently, a modification to FC-LS was accepted which allows multi-frame sequences and all vendors have indicated they are interoperable with the change. As such, extend RDP support with the additional fields and send a multi-frame sequence. Signed-off-by:
-
Dick Kennedy authored
Before releasing nvme io back to the io stack for possible retry on other paths, ensure the io termination is interlocked with the target device by ensuring the entire ABTS-LS protocol is complete. Additionally, FC-NVME ABTS-LS protocol does not use RRQ. Remove RRQ behavior from ABTS-LS. Signed-off-by:
-
Dick Kennedy authored
Firmware update fails with: status x17 add_status x56 on the final write If multiple DMA buffers are used for the download, some firmware revs have difficulty with signatures and crcs split across the dma buffer boundaries. Resolve by making all writes be a single 4k page in length. Signed-off-by:
-
Dick Kennedy authored
The driver is seeing a NULL pointer in lpfc_nvme_fcp_io_submit. This was ultimately due to a transport AER being sent on a terminated controller, thus some of the values were not set. In case we're in a system without a corrected transport and in case a race condition occurs where we enter the routine as the teardown is happening in a separate thread, validate the parameters before starting the io. Signed-off-by:
-
Dick Kennedy authored
The initial implementation of NVME didn't merge with NPIV support. As such, there are several issues if NPIV is used with NVME. For now, ensure that if NVME is enabled then NPIV is not enabled. Support for NPIV with NVME will be added in the near future. Signed-off-by:
-
Dick Kennedy authored
if nvmet targetport registration fails, the driver encounters a NULL pointer oops in lpfc_hb_timeout_handler. To fix: if registration fails, ensure nvmet_support is cleared on the port structure. Also enhanced the log message on failure. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Dick Kennedy authored
The descriptions for lpfc_xri_split and lpfc_enable_fc4_type were poor. Revise for better understanding: lpfc_xri_split - Percentage of FCP XRI resources versus NVME lpfc_enable_fc4_type - Enable FC4 Protocol support - FCP / NVME Signed-off-by:
-
James Smart authored
Always set ctxp->state to LPFC_NVMET_STE_ABORT if ABORT op gets called Signed-off-by:
-
James Smart authored
There are several log messages that report abnormal terminations that by default are marked warn. These are typically the result of failures due to invalid controller state or abort completions. They are all natural when a controller resets. Unfortunately, as they are logged by default, it makes the admin very concerned. Convert the messages to Info. Signed-off-by:
-
Dick Kennedy authored
The driver is encountering oops in lpfc_sli_calc_ring. The driver is setting hba_wqidx for FCP based on the policy in use for NVME. The two may not be the same. Change to set the wqidx based on the FCP policy. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Dick Kennedy authored
Under heavy target nvme load duration, the lpfc irq handler is encountering cpu lockup warnings. Convert the driver to a shortened ISR handler which identifies the interrupting condition then schedules a workq thread to process the completion queue the interrupt was for. This moves all the real work into the workq element. As nvmet_fc upcalls are no longer in ISR context, don't set the feature flags Signed-off-by:
-
Dick Kennedy authored
Need to make ktime samples more accurate If ktime is turned on in the middle of an IO, the max calculation could be misleading. Base sampling on the start time of the IO as opposed to ktime_on. Make ISR ktime timestamps be from when CQE is read instead of EQE. Added additional sanity checks when deciding whether to accept an IO sample or not. Signed-off-by:
-
Dick Kennedy authored
Local Reject/Invalid RPI errors seen during discovery. Temporary RPI cleanup was occurring regardless of SLI rev. It's only necessary on SLI-4. Adjust the test for whether cleanup is necessary. Signed-off-by:
-
Dick Kennedy authored
Warning messages when NVME_TARGET_FC not defined on ppc builds The lpfc_nvmet_replenish_context() function is only meaningful when NVME target mode enabled. Surround the function body with ifdefs for target mode enablement. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Dick Kennedy authored
In a link bounce scenario, a condition can occur where the discovery engine swaps an ndlp structure (address change for an nport). While the swap was successfully executed by the discovery engine, the driver did not properly detect a change in the ndlp bound to the nvme rport. This error resulted in the nvme host transport issuing an IO to the correct nvme rport, but the lpfc driver addressed a ndlp with an NLP_UNUSED status and failed the io. This resulting it it looking like there were missing namespaces and applications failed due to io errors. To fix, in lpfc_nvme_register_rport, rework the "rebind" case to break the nvme rport<->ndlp association when the ndlp already has an nrport. Then rebind the rport to the correct ndlp data and backpointers. [mkp: typo] Signed-off-by:
-
Dick Kennedy authored
The driver crashes when attempting to use a freed ndpl pointer. The pci_remove_one handler runs on a separate kernel thread. The order of the removal is starting by freeing all of the ndlps and then disabling interrupts. In between these two events the driver can still receive an ELS and process it. When it tries to use the ndlp pointer will be NULL Change the order of the pci_remove_one vs disable interrupts so that interrupts are disabled before the ndlp's are freed. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Dick Kennedy authored
During pci hot plug, the kernel crashes in a list_add_call The lookup by tag function will return null if the IOCB is out of range or does not have the on txcmplq flag set. Fix: Check for null return from lookup by tag. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Dick Kennedy authored
During pci hot plug, the kernel crashes in timer management code. The sli4 remove_one handler is not stoping the timers as it starts to remove the port so that it can be swapped. Fix: Stop the timers early in the handler routine. Note: Fix in SLI-4 only. SLI-3 already stopped the timers properly. Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Don Brace authored
Reviewed-by:
Gerry Morong <gerry.morong@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Kevin Barnett authored
Fix a small cosmetic bug in a very rarely encountered error message that can occur when a LD has a corrupted raid map. Reviewed-by:
-
Kevin Barnett authored
Update the driver's PCI IDs. Reviewed-by:
-
- Sep 28, 2017
-
-
Colin Ian King authored
Remove unused variable sas_ha to clean up build warning "unused variable sas_ha [-Wunused-variable]" Fixes: 042ebd29 ("scsi: libsas: kill useless ha_event and do some cleanup") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
kehuanlin authored
Since the command type of UTRD in UFS 2.1 specification is the same with UFS 2.0. And it assumes the future UFS specification will follow the same definition. Signed-off-by:
kehuanlin <kehuanlin@pinecone.net> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Huanlin Ke authored
Several configurable fields of the Device Descriptor and the Unit Descriptors determine the Boot LUN status. The bBootEnable field and the bBootLunEn attribute is set to zero by default, so the Boot LUN is disabled by default. At which point the scsi device add for Boot LUN will fail, but we can continue to use the ufs device in fact. This failure shouldn't abort the device boot. Signed-off-by:
-
Zang Leigang authored
Signed-off-by:
Zang Leigang <zangleigang@hisilicon.com> Reviewed-by:
-
Zang Leigang authored
Signed-off-by:
-
- Sep 26, 2017
-
-
Meng Xu authored
Since right after the user copy, we are going to memset(&karg, 0, sizeof(karg)), the copy_from_user is redundant Signed-off-by:
Meng Xu <mengxu.gatech@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Thomas Meyer authored
Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0. Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci" Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Thomas Meyer authored
Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0. Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci" Signed-off-by:
-
Hannes Reinecke authored
Device handlers are optional, and for some handlers like ALUA only implemented for certain device types. So suppress any errors for unsupported devices. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Hannes Reinecke authored
Rather than having each device handler implementing their own error mapping, have the ->attach() call return a SCSI_DH_XXX error code and implement the mapping in scsi_dh_handler_attach(). Suggested-by:
-
Damien Le Moal authored
Reporting a maximum number of blocks that is not aligned on the device physical size would cause a large write same request to be split into physically unaligned chunks by __blkdev_issue_write_zeroes() and __blkdev_issue_write_same(), even if the caller of these functions took care to align its request to physical sectors. Make sure the maximum reported is aligned to the device physical block size. This is only an optional optimization for regular disks, but this is mandatory to avoid failure of large write same requests directed at sequential write required zones of host-managed ZBC disks. [mkp: tweaked commit message] Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Varun Prakash authored
Set PCIe relaxed ordering bits in FW_IQ_CMD if relaxed ordering is enabled in the PCIe device. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
- Sep 16, 2017
-
-
Colin Ian King authored
csk is always null on the error return path and so the non-null check and call to cxgbi_sock_closed on csk is redundant and can be removed. Detected by: CoverityScan CID#114329 ("Logically dead code") Signed-off-by: -
chenxiang authored
Events will be added to defer_q list when setting ha->status to SAS_HA_DRAINING. Events will be called after drain workqueue. Those events are added to the head of list, but they are scanned one by one from the head to the tail, which will cause those events be called in the reverse order of being added. So change list_add to list_add_tail in function sas_queue_work. Signed-off-by:
chenxiang <chenxiang66@hisilicon.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
Jason Yan authored
Rename function notify_port_event() to sas_notify_port_event(), which will be consistent with sas_notify_phy_event(). Signed-off-by:
-
Jason Yan authored
No one uses the port_gone_completion in struct asd_sas_port and DISCE_PORT_GONE in enum disover_event, clean them out. Signed-off-by:
-
