- Nov 10, 2022
-
-
Philip Yang authored
Re-take the eviction lock immediately again after the allocation is completed, to fix circular locking warning with drm_buddy allocator. Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are called from multiple files. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Philip Yang authored
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest application. If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the kernel WARNING. Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to cleanup bo_list userptr bo. WARNING: kfdtest/2930 still has locks held! 1 lock held by kfdtest/2930: (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu] stack backtrace: dump_stack_lvl+0x44/0x57 get_signal+0x79f/0xd00 arch_do_signal_or_restart+0x36/0x7b0 exit_to_user_mode_prepare+0xfd/0x1b0 syscall_exit_to_user_mode+0x19/0x40 do_syscall_64+0x40/0x80 Signed-off-by: -
Asher Song authored
This reverts commit 4545ae2e . The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine. Test failure is caused by test case self. Signed-off-by:
Asher Song <Asher.Song@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Dillon Varone authored
[WHY?] Data return times when using lowest memclk can be <= 60us, which can cause underflow on high bandwidth displays with a workload. [HOW?] Enforce a minimum prefetch time during validation for low memclk modes. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alan Liu <HaoPing.Liu@amd.com> Signed-off-by:
Dillon Varone <Dillon.Varone@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Steve Su authored
[Why] 1. Port of gpio has different mapping. [How] 1. Add a dummy entry in mapping table. 2. Fix incorrect mask bit field access. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Steve Su <steve.su@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] The link enablement sequence can end up resetting the encoder while the PHY symclk isn't yet on. This means that waiting for symclk on will timeout, along with the reset bit never asserting high. This causes unnecessary delay when enabling the link and produces a warning affecting multiple IGT tests. [How] Don't wait for the symclk to be on here because firmware already does. Don't wait for reset if we know the symclk isn't on. Split the reset into a helper function that checks the bit and decides whether or not a delay is sufficient. Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Chaitanya Dhere authored
[Why] Recent backports from open source do not have header inclusion pattern that is consistent with inclusion style in the rest of the file. This breaks the internal tool builds as well. A recent commit erronously modified the original DML formula for calculating ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation from the golden values. [How] Change the way in which display_mode_vba.h is included so that it is consistent with the inclusion style in rest of the file which also fixes the tool build. Restore the DML formula to its original state to fix the FCLK deviation. Reviewed-by:
Aurabindo Pillai <Aurabindo.Pillai@amd.com> Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by:
-
Aurabindo Pillai authored
[Why&How] Bug was caused when moving variable from stack to heap because it was reusable and garbage was left over, so we need to zero mem. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why & How] New values requested by hardware after fine-tuning. Update for all memory types. Reviewed-by:
-
Christian König authored
It can happen that we query the sequence value before the callback had a chance to run. Workaround that by grabbing the fence lock and releasing it again. Should be replaced by hw handling soon. Signed-off-by:
Stefan Springer <stefanspr94@gmail.com> Signed-off-by:
-
Felix Kuehling authored
Checkpoint BOs last. That way we don't need to close dmabuf FDs if something else fails later. This avoids problematic access to user mode memory in the error handling code path. criu_checkpoint_bos has its own error handling and cleanup that does not depend on access to user memory. In the private data, keep BOs before the remaining objects. This is necessary to restore things in the correct order as restoring events depends on the events-page BO being restored first. Fixes: be072b06 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects") Reported-by:
Jann Horn <jannh@google.com> CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-and-tested-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
Felix Kuehling authored
mutex_unlock before the exit label because all the error code paths that jump there didn't take that lock. This fixes unbalanced locking errors in case of restore errors. Fixes: 40e8a766 ("drm/amdkfd: CRIU checkpoint and restore events") Signed-off-by:
-
Tim Huang authored
Some of the unused messages that were used earlier in development have been freed up as spare messages, no intended functional changes. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Tim Huang <tim.huang@amd.com> Acked-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
- Nov 04, 2022
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2022-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Add locking around DKL PHY register accesses (Imre Deak) - Stop abusing swiotlb_max_segment (Robert Beckett) - Filter out invalid outputs more sensibly (Ville Syrjälä) - Setup DDC fully before output init (Ville Syrjälä) - Simplify intel_panel_add_edid_alt_fixed_modes() (Ville Syrjälä) - Grab mode_config.mutex during LVDS init to avoid WARNs (Ville Syrjälä) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y2ODlCGM4nACmzsJ@tursulin-desk
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.1-2022-11-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-11-02: amdgpu: - DCN 3.1.4 fixes - DCN 3.2.x fixes - GC 11.x fixes - Virtual display fix - Fail suspend if resources can't be evicted - SR-IOV fix - Display PSR fix amdkfd: - Fix possible NULL pointer deref - GC 11.x trap handler fix Signed-off-by:
-
- Nov 03, 2022
-
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2022-11-02-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.1-rc4: - Small fixes to make rockchip work better. - Fix imx Kconfig. - Small fix to imx' mode_valid. Signed-off-by:
-
Jay Cornwall authored
With corresponding FW change fixes issue where triggering CWSR on a workgroup with waves in s_barrier wouldn't lead to a back-off and therefore cause a hang. Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Tested-by:
Graham Sider <Graham.Sider@amd.com> Acked-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by:
-
Nevenko Stupar authored
[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by:
Jasdeep Dhillon <jdhillon@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by:
Mark Broadworth <mark.broadworth@amd.com> Signed-off-by:
-
George Shen authored
[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by:
George Shen <george.shen@amd.com> Tested-by:
-
George Shen authored
[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by:
-
George Shen authored
[Why] DSC config is calculated separately from DML calculations. DML should use these separately calculated DSC params. The issue is that the calculated bpp is not properly propagated into DML. [How] Correctly used forced_bpp value in DML. Reviewed-by:
-
George Shen authored
[Why] DCN32 DSC delay calculation had an unintentional integer division, resulting in a mismatch against the DML spreadsheet. [How] Cast numerator to double before performing the division. Reviewed-by:
-
Gavin Wan authored
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e779 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by:
Gavin Wan <Gavin.Wan@amd.com> Signed-off-by:
-
Graham Sider authored
Temporary workaround to fix issues observed in some compute applications when GFXOFF is enabled on GFX11. Signed-off-by:
-
Mario Limonciello authored
If a system does not have swap and memory is under 100% usage, amdgpu will fail to evict resources. Currently the suspend carries on proceeding to reset the GPU: ``` [drm] evicting device resources failed [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12 [drm] free PSP TMR buffer [TTM] Failed allocating page table [drm] evicting device resources failed amdgpu 0000:03:00.0: amdgpu: MODE1 reset amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset ``` At this point if the suspend actually succeeded I think that amdgpu would have recovered because the GPU would have power cut off and restored. However the kernel fails to continue the suspend from the memory pressure and amdgpu fails to run the "resume" from the aborted suspend. ``` ACPI: PM: Preparing to enter system sleep state S3 SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO) cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0 node 0: slabs: 22, objs: 1122, free: 0 ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651) [drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed! [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62 amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62). PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62 amdgpu 0000:03:00.0: PM: failed to resume async: error -62 ``` To avoid this series of unfortunate events, fail amdgpu's suspend when the memory eviction fails. This will let the system gracefully recover and the user can try suspend again when the memory pressure is relieved. Reported-by:
<post@davidak.de> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Graham Sider authored
Use mes.sched_version, mes.kiq_version for debugfs as mes.ucode_fw_version does not contain correct versioning information. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Signed-off-by:
-
Yifan Zhang authored
This patch to fix the gdm3 start failure with virual display: /usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument /usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back. Signed-off-by:
-
Max Tseng authored
Missing send cursor_rect width & Height into DMUB. PSR-SU would use these information. But missing these assignment in last refactor commit Reported-by:
Timur Kristóf <timur.kristof@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2227 Fixes: b73353f7 ("drm/amd/display: Use the same cursor info across features") Tested-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Max Tseng <max.tseng@amd.com> Signed-off-by:
-
Alvin Lee authored
Missed enabling timing sync on DCN32 because DCN32 has a different DML param. Tested-by:
-
Dillon Varone authored
[Why] Cannot report 0 memclk levels even when SMU does not provide any. [How] When memclk levels reported by SMU is 0, set levels to 1. Tested-by:
-
Dillon Varone authored
Update DF related latencies based on new measurements. Tested-by:
-
Jun Lei authored
[why] Hardware team recommends we limit dispclock to 1950Mhz for all DCN3.2.x [how] Limit to 1950 when initializing clocks. Tested-by:
-
Fangzhi Zuo authored
Ignore cable ID for DP2 receivers that does not support the feature. Tested-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Leo Chen authored
dcn314 has 4 DSC - conflicted hardware document updated and confirmed. Tested-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Leo Chen <sancchen@amd.com> Signed-off-by:
-
- Nov 01, 2022
-
-
Nathan Huckleberry authored
The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of imx_tve_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by:Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Liu Ying authored
A duplicated line 'select DRM_KMS_HELPER' was introduced in Kconfig file by commit 09717af7 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option"), so remove it. Fixes: 09717af7 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option") Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
- Oct 31, 2022
-
-
Ville Syrjälä authored
drm_mode_probed_add() is unhappy about being called w/o mode_config.mutex. Grab it during LVDS fixed mode setup to silence the WARNs. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b8807 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-4-ville.syrjala@linux.intel.com Reviewed-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit a3cd4f44 ) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Ville Syrjälä authored
Since commit a5810f55 ("drm/i915: Allow more varied alternate fixed modes for panels") intel_panel_add_edid_alt_fixed_modes() no longer considers vrr vs. drrs separately. So no reason to pass them as separate parameters either. Signed-off-by:
-
Ville Syrjälä authored
Call intel_sdvo_select_ddc_bus() before initializing any of the outputs. And before that is functional (assuming no VBT) we have to set up the controlled_outputs thing. Otherwise DDC won't be functional during the output init but LVDS really needs it for the fixed mode setup. Note that the whole multi output support still looks very bogus, and more work will be needed to make it correct. But for now this should at least fix the LVDS EDID fixed mode setup. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b8807 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by:
-
