- Dec 16, 2008
-
-
Ben Dooks authored
Add the second I2C channel on the SMDK6410. Signed-off-by:Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Add common gpio setup for i2c bus 1 on all current S3C64XX architectures. Signed-off-by: -
Ben Dooks authored
Add i2c bus 0 to the configuration Signed-off-by: -
Ben Dooks authored
Add the necessary device initialisation information for I2C device 0. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks N, O, P and Q. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks G, H, I and J. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks D, E and F. Signed-off-by: -
Ben Dooks authored
GPIO register and configuration definitions for GPIO banks A, B and C. Signed-off-by: -
Ben Dooks authored
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: -
Ben Dooks authored
Add device definition and support code for the Samsung HSMMC channel 1 device. Signed-off-by: -
Ben Dooks authored
Add the necessary helper functions for setting up the SDHCI device information. Signed-off-by: -
Ben Dooks authored
Add the specific register definitions for the Samsung SDHCI (HSMMC) block for the S3C2443 and S3C64XX series. Signed-off-by: -
Ben Dooks authored
Add new GPIO configuration calls that mesh with the new gpiolib support. Signed-off-by: -
Ben Dooks authored
Add gpiolib registration for the GPIOs available on the S3C64XX platform Signed-off-by: -
Ben Dooks authored
The gpiolib driver keeps its chip array to itself and having a separate array for s3c-only gpios stops any non-s3c gpio being used in one of the s3c specific configuration calls. Signed-off-by: -
Ben Dooks authored
Move the common parts of the GPIO code into plat-s3c for use with both the s3c24xx and s3c64xx systems. Signed-off-by: -
Ben Dooks authored
Define the gpio numbers for the S3C64XX GPIO banks available on the S3C6400 and S3C6410. Signed-off-by: -
Ben Dooks authored
Add HSMMC0 device to SMDK6410. Signed-off-by: -
Ben Dooks authored
Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: -
Ben Dooks authored
Add definitions for the external interrupt groups which accompany the original IRQ_EINT from the s3c24xx series. Signed-off-by: -
Ben Dooks authored
Discard the 'void *' from the pointers used for the virtual addresses when setting up the .virtual fields of the io map to avoid implicit cast warnings Signed-off-by: -
Ben Dooks authored
Some of the startup output can be reduced to KERN_DEBUG from KERN_INFO as it is only really useful when trying to debug kernel initialisation problems. Signed-off-by: -
Ben Dooks authored
Add a basic defconfig for s3c6400 series machines. Signed-off-by: -
Ben Dooks authored
Initial machine support for the Samsung SMDK6410. Signed-off-by: -
Ben Dooks authored
Add the necessary code to support IRQ_EINT(x) on the S3C64XX series of CPUs. Note, since there is no GPIO configuration support in the kernel, the irq set_type method does not configure the relevant pin to interrupt. Signed-off-by: -
Ben Dooks authored
Add mapping for GPIO block in the static mappings. Signed-off-by: -
Ben Dooks authored
The original arch/arm/include/asm/hardware/vic.h was written for the PL190 ARM VIC implementation, and as such does not have any information about the PL192 version. Add details about the PL192 and PL190 specific registers and any changes between the two units. Signed-off-by: -
Ben Dooks authored
Add demux handling for the UART interrupts generated by the VIC into their seperate IRQs that the serial driver can register. Signed-off-by: -
Ben Dooks authored
The S3C64XX code changes the order of the serial interrupts, so change the registration process to pickup the extra IRQ resources. Signed-off-by: -
Ben Dooks authored
Add support to the Samsung serial driver for the S3C6400 and S3C6410 serial ports. Signed-off-by: -
Ben Dooks authored
Add the PLL clock initialisation and clock registration and include the clocks sourced via CLKDIVx for most of the on-chip peripherals. Signed-off-by: -
Ben Dooks authored
Add TICK_MAX definition for the timer code as the S3C64XX series have 32bit capable PWM timers. Signed-off-by: -
Ben Dooks authored
Add the initial clocks definitions for the s3c6400 and s3c6410. Move the epll and ext clock from the s3c2443 support into the common code. Signed-off-by: -
Ben Dooks authored
Add definitions for the s3c6400 epll and main pll as well as functions to decode the rate. Add Signed-off-by: -
Ben Dooks authored
Add the common initialisation code for both the S3C6400 and S3C6410, the UART registration. Signed-off-by: -
Ben Dooks authored
Add the physical to virtual memory mapping and the necessary interrupt demuxing for the PWM timer blocks. Signed-off-by: -
Ben Dooks authored
The pwm-clock.c needs <mach/map.h> which is included via other means on S3C24XX systems, so ensure it is explicitly included. Remove the includes of regs-clock.h and regs-gpio.h as these are not needed by the build. Signed-off-by: -
Ben Dooks authored
Add the necessary support for the timer on the S3C6400 and S3C6410 by adding <mach/tick.h> Signed-off-by: -
Ben Dooks authored
Add and initialise the two VIC (PL192) found on the S3C64XX series CPUs. Signed-off-by: -
Ben Dooks authored
Initial support for the Samsung S3C6410 SoC. Signed-off-by:
-
