- Aug 03, 2009
-
-
Steve Glendinning authored
The eeprom read & write commands currently check the E2P_CMD_LOADED_ bit is set before allowing any operations. This prevents any reading or writing unless a correctly programmed EEPROM is installed. This patch removes the check, so it is possible to program blank EEPROMS via ethtool. Signed-off-by:
Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This renames away a variable clash: * ipv6_table[] is declared as a static global table; * ipv6_sysctl_net_init() uses ipv6_table to refer/destroy dynamic memory; * ipv6_sysctl_net_exit() also uses ipv6_table for the same purpose; * both the two last functions call kfree() on ipv6_table. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/ ) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/ ) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by:
-
Divy Le Ray authored
Modify control register settings to accommodate the bridge's max read requset size. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Divy Le Ray authored
Fix a cut'n paste error in the AEL2020 twinax EDC file name Signed-off-by:
-
- Aug 02, 2009
-
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for vxge. Signed-off-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for s2io. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for qlge. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for ixgb. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for igbvf. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for bnx2x. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for bnx2. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for atl1e. Signed-off-by:
-
Dean Nelson authored
PCI drivers that implement the struct pci_error_handlers' error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for atl1c. Signed-off-by:
-
Sathya Perla authored
When the driver loads the POST stage of the card is expected to be POST_STAGE_ARMFW_RDY. Signed-off-by:
Sathya Perla <sathyap@serverengines.com> Signed-off-by:
-
Sathya Perla authored
be_mbox_db_ring() has been changed to be_mbox_notify() (to be consistent with be_mcc_notify()) and struct be_mcc_cq_entry changed to be_mcc_compl to be consistent with rx/tx_compl. Signed-off-by:
-
Sathya Perla authored
And get rid of some unnecessary printks. Signed-off-by:
-
Sathya Perla authored
pci function is available as PCI_FUNC(pdev->devfn); no need for a separate field. Signed-off-by:
-
Sathya Perla authored
Currently only the be_ctrl_info struct ptr (instead of adapter) is passed to all the routines in be_cmds.c. Instead pass be_adapter ptr to allow access to all its fields. Merge the contents of struct be_ctrl_info into be_adapter. The resulting code is simpler. Signed-off-by:
-
- Jul 31, 2009
-
-
-
David S. Miller authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
-
Peter P Waskiewicz Jr authored
When a user disables interrupt throttling with ethtool on 82599 devices, the interrupt timer may not be re-enabled if hardware RSC is running. The RSC completions in hardware don't complete before the next ITR event tries to fire, so the ITR timer never gets re-armed. This patch increases the amount of time between interrupts when throttling is disabled (rx-usecs = 0) when the hardware RSC deature is enabled. Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Peter P Waskiewicz Jr authored
A second set of feature flag bits was added, and the hardware RSC engine flags were moved there. However, the code itself didn't make the move completely to use the new bitmap. Signed-off-by:
Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by:
-
Peter P Waskiewicz Jr authored
Our ndo_poll_controller callback is broken for anything but non-multiqueue setups. This fixes that issue. Signed-off-by:
-
Neil Horman authored
Choose saner defaults for xfrm[4|6] gc_thresh values on init Currently, the xfrm[4|6] code has hard-coded initial gc_thresh values (set to 1024). Given that the ipv4 and ipv6 routing caches are sized dynamically at boot time, the static selections can be non-sensical. This patch dynamically selects an appropriate gc threshold based on the corresponding main routing table size, using the assumption that we should in the worst case be able to handle as many connections as the routing table can. For ipv4, the maximum route cache size is 16 * the number of hash buckets in the route cache. Given that xfrm4 starts garbage collection at the gc_thresh and prevents new allocations at 2 * gc_thresh, we set gc_thresh to half the maximum route cache size. For ipv6, its a bit trickier. there is no maximum route cache size, but the ipv6 dst_ops gc_thresh is statically set to 1024. It seems sane to select a simmilar gc_thresh for the xfrm6 code that is half the number of hash buckets in the v6 route cache times 16 (like the v4 code does). Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Hannes Eder authored
While being at it cleanup whitespace. Signed-off-by:
Hannes Eder <heder@google.com> Signed-off-by:
-
Jiajun Wu authored
Parameter order for using mk_ic_value(count, time) was reversed, the patch fixes this. Signed-off-by:
Jiajun Wu <b06378@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Eric Dumazet authored
If a socket is hashed in last slot of pppoe hash table (PPPOE_HASH_SIZE-1) we report it many times (up to filling seq buffer) (Only the last socket of last slot) Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
roel kluin authored
start_code is 69 words, but the code always writes a multiple of 16 words, so the last 11 words written are outside the array. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
roel kluin authored
If arp_format_neigh_entry() can be called with n->dev->addr_len == 0, then a write to hbuffer[-1] occurs. Signed-off-by:
-
roel kluin authored
if dev_alloc_skb() fails on the first iteration, a write to cp->rx_ring[-1] occurs. Signed-off-by:
-
Stephen Hemminger authored
There is no reason for the arbitrary restriction that device must be up to create a vlan. This patch was added to Vyatta kernel to resolve startup ordering issues where vlan's are created but real device was disabled. Note: the vlan already correctly inherits the operstate from real device; so if vlan is created and real device is marked down, the vlan is marked down. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Tobias Klauser authored
Use the %pI4 format string instead of %d.%d.%d.%d and NIPQUAD. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
In some cases with 57711E, depending on the functions unload sequence, other functions MAC address could have been used to wake the system as well. Make sure to block all but the current function if WoL is required by changing the mode to single function WoL. Signed-off-by:
-
Eilon Greenstein authored
Self test used to play with the management FIFO possibly while management was running... Signed-off-by:
-
Eilon Greenstein authored
Due to lack of configuration, if the BMC configures the chip to pass all broadcast/multicast traffic to it, the host will not receive it. On top of fixing it, also make sure that in promiscuous mode, the host will receive the management traffic as well. Signed-off-by:
-
Michael Chan authored
Changing to GFP_ATOMIC because the only caller in cnic/bnx2i may be calling this function while holding spin_lock. This problem was discovered by Mike Christie. Signed-off-by:
Michael Chan <mchan@broadcom.com> Acked-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Julia Lawall authored
The test on map4 should be a test on map6. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/ ) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
-
