Reduces code duplication and adds missing bits for USB variants

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Host time is used to calculate the channel active time on mt7603 and mt7615.
Use the same on mt76x02 and move the lock to core code to get rid of some
duplicated code.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

MT_MIB_STAT_PSCCA only counts rx CCA busy time, which does not include
tx time. MT_MIB_STAT_CCA counts full busy time, including Rx, Tx and NAV

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Poll per-station hardware counters after tx status events

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Report total rx airtime for valid stations as BSS rx time in survey

mt7615 is left out for now, it will be supported later by reading
hardware counters instead of calculating airtime in software

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt76_channel_state() from mt76.h to mac80211.c
Preparation for updating channel state from more places in the drivers/core

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This reduces the struct size and is useful for adding more flags later

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This can be used in monitor mode to figure out which subframes were sent as
part of which A-MPDU

Signed-off-by: Felix Fietkau <nbd@nbd.name>

It is no longer used

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce ampdu_stat entry in mt7603 debugfs in order to dump 802.11
aggr cumulative statistics

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce ampdu_stat entry in mt7615 debugfs in order to dump 802.11
aggr cumulative statistics

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move aggr_stats array from mt76x02_dev to mt76_dev in order to be reused
adding aggregation stats for mt7603/mt7615 drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mt7615_queues_read routine to dump hw queue related info.
Add hw ac queues statistics in mt7615 debugfs

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move queue debugfs entry to driver specific code since mt7615 devices
rely on a different queue layout

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the
code is shared between both drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove mt76x02_mac_reset_counters from mt76x0_init_hardware since
it will be run starting the device

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of
mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Unify mac_reset_counter routine and move it in mt76x02_lib module
since it is shared by all mt76x02 drivers (pci/usb)

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Enable Smart Carrier Sense algorithm by default in order to improve
performances in a noisy environment

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Don't populate the array mt76x0_chan_map on the stack but instead make it
static const. Makes the object code smaller by 80 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   7685	   1192	      0	   8877	   22ad	mediatek/mt76/mt76x0/eeprom.o

After:
   text	   data	    bss	    dec	    hex	filename
   7541	   1256	      0	   8797	   225d	mediatek/mt76/mt76x0/eeprom.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce lockdep_assert_held macro in __mt76u_vendor_request routine
and remove comments regarding usb_ctrl_mtx lock

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove empty flag in mt76_txq_schedule_list and mt76_txq_send_burst
since we just need retry_q length to notify mac80211 to reschedule the
current tx queue

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The workqueue item needs to be fully shut down before the struct can be
freed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

It is unused

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Adjust filters and ensure frames don't get sent to MCU instead of host

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback:
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable]

They are introduced by commit e542e66b

 ("rtl8xxxu:
add bluetooth co-existence support for single antenna"), but never used,
so remove them.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

This fixes a minor WARNING in the cfg80211:
[  130.658034] ------------[ cut here ]------------
[  130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211]

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Keeping interrupts on could result in brcmfmac freeing some resources
and then IRQ handlers trying to use them. That was obviously a straight
path for crashing a kernel.

Example:
CPU0                           CPU1
----                           ----
brcmf_pcie_reset
  brcmf_pcie_bus_console_read
  brcmf_detach
    ...
    brcmf_fweh_detach
    brcmf_proto_detach
                               brcmf_pcie_isr_thread
                                 ...
                                 brcmf_proto_msgbuf_rx_trigger
                                   ...
                                   drvr->proto->pd
    brcmf_pcie_release_irq

[  363.789218] Unable to handle kernel NULL pointer dereference at virtual address 00000038
[  363.797339] pgd = c0004000
[  363.800050] [00000038] *pgd=00000000
[  363.803635] Internal error: Oops: 17 [#1] SMP ARM
(...)
[  364.029209] Backtrace:
[  364.031725] [<bf243838>] (brcmf_proto_msgbuf_rx_trigger [brcmfmac]) from [<bf2471dc>] (brcmf_pcie_isr_thread+0x228/0x274 [brcmfmac])
[  364.043662]  r7:00000001 r6:c8ca0000 r5:00010000 r4:c7b4f800

Fixes: 4684997d

 ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Different interfaces have its own link-related power save mechanism.
Such as PCI can enter L1 state based on the traffic on the link, and
sometimes driver needs to enable/disable it to avoid some issues, like
throughput degrade when PCI trying to enter L1 state even if driver is
having heavy traffic.

For now, rtw88 only supports PCIE chips, and they just need to disable
ASPM L1 when driver is not in power save mode, such as IPS and LPS.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

By Realtek's design, there are two HW modules associated for CLKREQ,
one is responsible to follow the PCIE host settings, and another
is to actually working on it. But the module that is actually working
on it is default disabled, and driver should enable that module if
host and device have successfully sync'ed with each other.

The module is default disabled because sometimes the host does not
support it, and if there is any incorrect settings (ex. CLKREQ# is
not Bi-Direction), device can be lost and disconnected to the host.

So driver should first check after host and device are sync'ed, and
the host does support the function and set it in configuration
space, then driver can turn on the HW module to working on it.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Use a for loop to polling DBI/MDIO read/write flags to avoid
infinite loop happens

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Add some register and bit macros to access DBI/MDIO register. This
should not change the logic.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Pass HE interface type data requests between firmware and driver.

Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Extension information elements have additional field for ID. This
commit adds TLV for such elements and a structure for interface HE
capabilities communication with firmware.

Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Firmware floods all packets that need to be flooded (multicast, broadcast,
unknown unicast) as required. Tell kernel bridge subsystem it does not
need to flood packet itself by marking each incoming frame
with skb->offload_fwd_mark flag.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Use MAC address of the first active radio as a unique device ID.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Add interface ID information to the tail of each transmitted packet
so that firmware can know to which interface the packet belongs to.
This is only needed if device supports HW switch capability.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

If firmware reports that it supports hardware switch capabilities,
driver needs to track and notify device whenever broadcast domain
of a particular network device changes (ie. whenever it's upper
master device changes).

Firmware needs a unique ID to tell broadcast domains from each other
which is an opaque number otherwise. For that purpose we can use
netspace:ifidx pair to uniquely identify each broadcast domain:
 - if netdev is not part of a bridge, then use it's own ifidx
   as a broadcast domain ID
 - if netdev is part of a bridge, then use bridge netdev ifidx
   as broadcast domain ID

Firmware makes sure that packets are only forwarded between
interfaces marked with the same broadcast domain ID.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Currently in case of error when registering network device with the
kernel, we won't properly cleanup VIF state in firmware due to DEL_VIF
command will not be send to wifi card. Make sure it does.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Since read RF register is an indirect access that hardware needs time to
accomplish read action, but there's no ready bit, so delay is required to
guarantee the read value is correct. After investigating internal documents,
these delays are reduced as proper values.

Reported-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>