It use blockpage instead of a pair (block, page). It can also cover a small chunk access. 0x00, 0x20, 0x40 and so on.

And in JFFS2 behavior, sometimes it reads two pages alternatively.
e.g., It first reads A page, B page and A page.
So we check another bufferram to find requested page.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

- Iterations of the patch to add oob auto-placement support to OneNAND left a line of code that was meant to have been deleted.
- read mtd->oobsize in onenand_transfer_auto_oob to optimized memcpy

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Enable the use of oob operation mode MTD_OOB_AUTO with OneNAND.
Note that MTD_OOB_RAW is still not supported.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

- Remove unused fields
- Fix typo

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

When write-verify is enabled (CONFIG_MTD_ONENAND_VERIFY_WRITE),
the data written is read back and compared.  The comparison
was being made between dataRAM buffers, but this does not
verify that the data made it to the dataRAM correctly in
the first place.  This patch amends write-verify to
compare back to the original buffer.  It also now verifies
sub-page writes.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

OneNAND records bad block information in the out-of-band area of either the first or second page of a block.  Due to a logic error, only the first page was being checked.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

OneNAND does 2 memory allocations for bad block information.
Only one of them was being freed.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Update copyrights and code cleanup

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

- DDP code clean-up
- Reduce block & bufferram operations in DDP

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

If OneNAND is operating within specification, all operations should easily be
completed within the 20 millisecond timeout.
This patch faithlessly adds a check for the timeout and returns an error in
that case.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

We have to set ONENAND_REG_START_BLOCK_ADDRESS to avoid status error

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Currently we issue a bounce trace when __blk_queue_bounce() is called,
but that merely means that the device has a lower dma mask than the
higher pages in the system. The bio itself may still be lower pages. So
move the bounce trace into __blk_queue_bounce(), when we know there will
actually be page bouncing.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix DRIVER_DESC macro
  HID: mousepoll parameter makes no sense for generic HID
  HID: tiny patch to remove a kmalloc cast
  HID: fix mappings for DiNovo Edge Keyboard - Logitech USB BT receiver

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Revert "ACPI: ibm-acpi: make non-generic bay support optional"
  ACPI: update MAINTAINERS
  ACPI: schedule obsolete features for deletion
  ACPI: delete two spurious ACPI messages
  ACPI: rename cstate_entry_s to cstate_entry
  ACPI: ec: enable printk on cmdline use
  ACPI: Altix: ACPI _PRT support

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  i915: Fix a DRM_ERROR that should be DRM_DEBUG.

Setting .ConfigBase and .Present is now done at the pcmcia core.

The driver cleanup missed a few places where the driver did set .Present
to PRESENT_OPTION and later to the values from the CIS.  Setting to
PRESENT_OPTION now overrides the values from the CIS.  So just remove
those lines.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

unionfs managed to hit this on s390.  Some architectures use __ptr_t in their
FD_ZERO implementation.  We don't have a __ptr_t.  Switch them over to plain
old void*.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We write back the wrong register when configuring the Geode processor.
Instead of storing to CCR4, it stores to CCR3.

Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This changes all HWRNG driver initcalls to module_init().  We must probe
the RNGs after the major kernel subsystems are already up and running (like
PCI).

This fixes Bug 7730.
http://bugzilla.kernel.org/show_bug.cgi?id=7730



Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a load option to intel-rng to allow skipping the FWH detection,
necessary in case the BIOS has locked read-only the firmware hub space.
Also prevent any attempt to write to firmware space if it cannot be write
enabled (apparently caused hangs on some systems not having an FWH and thus
also not having a respective RNG).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert bd_mount_mutex back to a semaphore so that xfs_freeze -f /mnt/newtest;
xfs_freeze -u /mnt/newtest works safely and doesn't produce lockdep warnings.

(XFS unlocks the semaphore from a different task, by design.  The mutex
code warns about this)

Signed-off-by: Dave Chinner <dgc@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix void cast and re-enable on sparc.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

    NFS: Fix race in nfs_release_page()

    invalidate_inode_pages2() may find the dirty bit has been set on a page
    owing to the fact that the page may still be mapped after it was locked.
    Only after the call to unmap_mapping_range() are we sure that the page
    can no longer be dirtied.
    In order to fix this, NFS has hooked the releasepage() method and tries
    to write the page out between the call to unmap_mapping_range() and the
    call to remove_mapping(). This, however leads to deadlocks in the page
    reclaim code, where the page may be locked without holding a reference
    to the inode or dentry.

    Fix is to add a new address_space_operation, launder_page(), which will
    attempt to write out a dirty page without releasing the page lock.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

    Also, the bare SetPageDirty() can skew all sort of accounting leading to
    other nasties.

[akpm@osdl.org: cleanup]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This adds the profile=kvm boot option, which enables KVM to profile VM
exits.

Use: "readprofile -m ./System.map | sort -n" to see the resulting
output:

   [...]
   18246 serial_out                               148.3415
   18945 native_flush_tlb                         378.9000
   23618 serial_in                                212.7748
   29279 __spin_unlock_irq                        622.9574
   43447 native_apic_write                        2068.9048
   52702 enable_8259A_irq                         742.2817
   54250 vgacon_scroll                             89.3740
   67394 ide_inb                                  6126.7273
   79514 copy_page_range                           98.1654
   84868 do_wp_page                                86.6000
  140266 pit_read                                 783.6089
  151436 ide_outb                                 25239.3333
  152668 native_io_delay                          21809.7143
  174783 mask_and_ack_8259A                       783.7803
  362404 native_set_pte_at                        36240.4000
 1688747 total                                      0.5009

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

md raidX make_request functions strip off the BIO_RW_SYNC flag, thus
introducing additional latency.

Fixing this in raid1 and raid10 seems to be straightforward enough.

For our particular usage case in DRBD, passing this flag improved some
initialization time from ~5 minutes to ~5 seconds.

Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Lars Ellenberg <lars@linbit.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

o sched_clock() a non-init function is using init data tsc_disable. This
  is flagged by MODPOST on i386 if CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.data:tsc_disable from .text between 'sched_clock' (at offset 0xc0109d58) and 'tsc_update_callback'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

o Kdump documentation update.
	- Update details for using relocatable kernel.
	- Start using kexec-tools-testing release as it is latest and old
	  kexec-tools can't load relocatable bzImage file.
	- Also add kdump on ia64 specific details.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Horms <horms@verge.net.au>
Cc: Mohan Kumar M <mohan@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Compiling the kernel with CONFIG_HOTPLUG = y and CONFIG_HOTPLUG_CPU = n
with CONFIG_RELOCATABLE = y generates the following modpost warnings

WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141b7d) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141b9c) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.text:__cpu_up
from .text between '_cpu_up' (at offset 0xc0141bd8) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c05) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c26) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c37) and 'cpu_up'

This is because cpu_up, _cpu_up and __cpu_up (in some architectures) are
defined as __devinit
AND
__cpu_up calls some __cpuinit functions.

Since __cpuinit would map to __init with this kind of a configuration,
we get a .text refering .init.data warning.

This patch solves the problem by converting all of __cpu_up, _cpu_up
and cpu_up from __devinit to __cpuinit. The approach is justified since
the callers of cpu_up are either dependent on CONFIG_HOTPLUG_CPU or
are of __init type.

Thus when CONFIG_HOTPLUG_CPU=y, all these cpu up functions would land up
in .text section, and when CONFIG_HOTPLUG_CPU=n, all these functions would
land up in .init section.

Tested on a i386 SMP machine running linux-2.6.20-rc3-mm1.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes the SH rtc driver to
  (a) correctly report 'enabled' status with other alarm status;
  (b) not duplicate that status in its procfs dump

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Back out the recent fix for this bug, fix it by correctly initialising
ConfigInfoView.sym.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix an oops experienced on the Cell architecture when init-time functions,
early_*(), are called at runtime.  It alters the call paths to make sure
that the callers explicitly say whether the call is being made on behalf of
a hotplug even, or happening at boot-time.

It has been compile tested on ppc64, ia64, s390, i386 and x86_64.

Acked-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

While testing 2.6.20-rc3 on a machine with some CK804 chipsets, we noticed
that quirk_nvidia_ck804_msi_ht_cap() was not detecting HT MSI capabilities
anymore.  It is actually caused by the MSI mapping on the root chipset
being the 2nd HT capability in the chain.  pci_find_ht_capability() does
not seem to find anything but the first HT cap correctly, because it
forgets to increment the position before looking for the next cap.  The
following patch seems to fix it.

At least, this proves that having a ttl is good idea since the machine
would have been stucked in an infinite loop if we didn't have a ttl :)

We have to pass pos + PCI_CAP_LIST_NEXT to __pci_find_next_cap_ttl to
get the next HT cap instead of the same one again.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew J. Gallatin <gallatin@myri.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Commit 5c1e1767 ("sched: force /sbin/init
off isolated cpus") sets init's cpus_allowed to a subset of cpu_online_map
at boot time, which means that tasks won't be scheduled on cpus that are
added to the system later.

Make init's cpus_allowed a subset of cpu_possible_map instead.  This should
still preserve the behavior that Nick's change intended.

Thanks to Giuliano Pochini for reporting this and testing the fix:

http://ozlabs.org/pipermail/linuxppc-dev/2006-December/029397.html



Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It might save a few bytes after bootup, but it causes the string to be
linked in at the end of the final vmlinux image, which defeats the whole
point of doing all this, namely allowing some broken user-space binaries
to search for the kernel version string in the kernel binary.

So just remove the __init specifier.

Cc: Olaf Hering <olaf@aepfle.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This reverts commit 2df910b4

.

ACPI_BAY has not been merged into mainline yet, so the changes to ibm-acpi
related Kconfig entries that depend on ACPI_BAY were permanently disabling
ibm-acpi bay support.  This is a serious regression for ThinkPad users.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>