Merge tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt

Actions Semi ARM64 DT for v5.10:

- Fix the memory region used by pinctrl and sps drivers on the S700 SoC.
  The issue is fixed by limiting the address space used by pinctrl driver.
  In hardware these two are separate subsystems but the hw engineers somehow
  merged the registers space into one. So we now limit the address space with
  appropriate offsets for the two drivers.

- Add DMA controller support for S700 SoC. The relevant driver changes are
  picked up by DMA Engine mainatainer. The DMA on this SoC can be used for
  mem-to-mem and mem-to-peripheral transfers.

* tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
  arm64: dts: actions: Add DMA Controller for S700
  arm64: dts: actions: limit address range for pinctrl node

Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt

Actions Semi ARM DT for v5.10:

- Add devicetree support for Caninos Loucos Labrador SBC manufactured
  by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil.
  This board is based on Actions Semi S500 SoC. More information about
  this board can be found in their website: https://caninosloucos.org/en/

- Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU

- Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi
  team in Taiwan. This board is based on Actions Semi S500 SoC.
  More information about this board can be found in their website:
  http://roseapplepi.org/

* tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
  ARM: dts: owl-s500: Add RoseapplePi
  ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
  ARM: dts: Add Caninos Loucos Labrador v2

Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt

Actions Semi bindings for v5.10

- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/

- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
  This board is based on Actions Semi S500 SoC. More information about
  this board can be found in their website:
  http://roseapplepi.org/index.php/spec/

- Add vendor prefix for Caninos Loucos Program:
  https://caninosloucos.org/en/program-en/

- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
  Integrated Technological Systems (LSI-TEC), Brazil. This board is based
  on Actions Semi S500 SoC. More information about this board can be found
  in their website: https://caninosloucos.org/en/labrador-32-en/

* tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
  dt-bindings: arm: actions: Document RoseapplePi
  dt-bindings: Add vendor prefix for RoseapplePi.org
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  dt-bindings: Add vendor prefix for Caninos Loucos

Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
  - Allwinner A100 initial support
  - Mali, DMA, cedrus and IR Support for the R40
  - Crypto support for the v3s
  - New board: Allwinner A100 Perf1

* tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits)
  ARM: dts: sun8i: v3s: Enable crypto engine
  dt-bindings: crypto: Add compatible for V3s
  dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset
  arm64: dts: allwinner: a64: Update the audio codec compatible
  arm64: dts: allwinner: a64: Update codec widget names
  ARM: dts: sun8i: a33: Update codec widget names
  ARM: dts: sun8i: r40: Add video engine node
  ARM: dts: sun8i: r40: Add node for system controller
  dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR
  ARM: dts: sun8i: r40: Add IR nodes
  dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible
  ARM: dts: sun8i: r40: Add DMA node
  dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible
  arm64: allwinner: A100: add support for Allwinner Perf1 board
  dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
  arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
  dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller
  dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi
  ARM: dts: sun4i: Enable HDMI support on the Mele A1000
  ...

Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: amlogic updates for v5.10 (round 2)
- GPU: remove invalid interrupt lines

* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node

Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org
Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org
Link: https://lore.kernel.org/r/7hsgawl9h2.fsf@baylibre.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt

Second and final device tree updates towards 5.10-rc1 for TI K3 platform.

* tag 'ti-k3-dt-for-v5.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits)
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema
  arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card
  arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes
  arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node
  arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node
  arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
  arm64: dts: ti: k3-j7200: Add I2C nodes
  arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs
  arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
  arm64: dts: ti: k3-j7200-main: add main navss cpts node
  arm64: dts: ti: k3-j7200: add DMA support
  arm64: dts: ti: Add support for J7200 Common Processor Board
  arm64: dts: ti: Add support for J7200 SoC
  dt-bindings: arm: ti: Add bindings for J7200 SoC
  ...

Link: https://lore.kernel.org/r/20201002134559.orvmgbns57qlyn3i@akan


Signed-off-by: Olof Johansson <olof@lixom.net>

The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
  #define INT_MALI_GP                 AM_IRQ(160)
  #define INT_MALI_GP_MMU             AM_IRQ(161)
  #define INT_MALI_PP                 AM_IRQ(162)
  #define INT_MALI_PMU                AM_IRQ(163)
  #define INT_MALI_PP0                AM_IRQ(164)
  #define INT_MALI_PP0_MMU            AM_IRQ(165)
  #define INT_MALI_PP1                AM_IRQ(166)
  #define INT_MALI_PP1_MMU            AM_IRQ(167)
  #define INT_MALI_PP2                AM_IRQ(168)
  #define INT_MALI_PP2_MMU            AM_IRQ(169)
  #define INT_MALI_PP3                AM_IRQ(170)
  #define INT_MALI_PP3_MMU            AM_IRQ(171)
  #define INT_MALI_PP4                AM_IRQ(172)
  #define INT_MALI_PP4_MMU            AM_IRQ(173)
  #define INT_MALI_PP5                AM_IRQ(174)
  #define INT_MALI_PP5_MMU            AM_IRQ(175)
  #define INT_MALI_PP6                AM_IRQ(176)
  #define INT_MALI_PP6_MMU            AM_IRQ(177)
  #define INT_MALI_PP7                AM_IRQ(178)
  #define INT_MALI_PP7_MMU            AM_IRQ(179)

However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU

Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).

Fixes: 7d3f6b53

 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com

The board uses lane 3 of SERDES for USB. Set the mux
accordingly.

The USB controller and EVM supports super-speed for USB0
on the Type-C port. However, the SERDES has a limitation
that upto 2 protocols can be used at a time. The SERDES is
wired for PCIe, QSGMII and USB super-speed. It has been
chosen to use PCI2 and QSGMII as default. So restrict
USB0 to high-speed mode.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-7-rogerq@ti.com

First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-6-rogerq@ti.com

j7200 has on USB controller instance. Add that.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-5-rogerq@ti.com

The USB controller can be connected to one of the 2 lanes
of SERDES0 using a MUX. Add a MUX controller node for that.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-4-rogerq@ti.com

The SERDES lane control mux registers are present in the
CTRLMMR space.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-3-rogerq@ti.com

There are 4 lanes in each J7200 SERDES. Each SERDES lane mux can
select upto 4 different IPs. Define all the possible functions.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200930122032.23481-2-rogerq@ti.com

Merge fix up for TI serdes mux definition introduced in 5.9 as
dependency for 5.10 series on J7200 USB.

Signed-off-by: Nishanth Menon <nm@ti.com>

Merge tag 'tegra-for-5.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Changes for v5.10-rc1

These changes extend support on the Nexus 7 and Acer A500 devices.

* tag 'tegra-for-5.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: nexus7: Add SMB347 battery charger
  ARM: tegra: nexus7: Add touchscreen
  ARM: tegra: nexus7: Use PLLC for WiFi MMC clock parent
  ARM: tegra: acer-a500: Use PLLC for WiFi MMC clock parent
  ARM: tegra: acer-a500: Set WiFi MMC clock rate to 50 MHz
  ARM: tegra: acer-a500: Correct PINCTRL configuration
  ARM: tegra: acer-a500: Remove atmel,cfg_name property
  ARM: tegra: acer-a500: Add aliases for MMC
  ARM: tegra: nexus7: Add aliases for MMC
  dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
  dt-bindings: tegra: pmc: Add Tegra234 support
  dt-bindings: fuse: tegra: Add Tegra234 support
  dt-bindings: tegra: Add Tegra234 VDK compatible
  dt-bindings: misc: tegra186-misc: Add Tegra234 support
  dt-bindings: misc: tegra186-misc: Add missing compatible string
  dt-bindings: misc: tegra-apbmisc: Add missing compatible strings

Link: https://lore.kernel.org/r/20200918150303.3938852-4-thierry.reding@gmail.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.9-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt2701:
- add jpeg enconder node
mt7623:
- refactor dts and add hdmi support

* tag 'v5.9-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mt7623: add missing pause for switchport
  arm: dts: mt7623: add lima related regulator
  arm: dts: mt7623: add display subsystem related device nodes
  arm: dts: mt7623: move display nodes to separate mt7623n.dtsi
  arm: dts: mt2701: Add jpeg enc device tree node

Link: https://lore.kernel.org/r/641d4d47-b7ad-42dd-f7a8-e028a1f64d70@gmail.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- make nor flash work
- fix da9211 regulator modes

mt8183:
- add support for system companion processor

mt8516:
- set reset gpio for gpio expander in pumpkin board

* tag 'v5.9-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: update watchdog device node
  arm64: dts: mt8173: elm: Fix nor_flash node property
  arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin
  arm64: dts: mt8183: add scp node
  arm64: dts: mt8173-elm: fix supported values for regulator-allowed-modes of da9211

Link: https://lore.kernel.org/r/1580bc76-b05a-ad29-1854-d2aca657c775@gmail.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: initial support for aml-s905x-cc v2
  dt-bindings: arm: amlogic: add support for libretch s905x cc v2
  arm64: dts: meson: add support for the ODROID-N2+
  dt-bindings: arm: amlogic: add support for the ODROID-N2+
  arm64: dts: meson: convert ODROID-N2 to dtsi
  arm64: dts: meson: vim3l: remove sound card definition
  arm64: dts: meson: vim3: make sound card common to all variants
  arm64: dts: meson: vim3: correct led polarity

Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: amlogic updates for v5.10
- minor cleanup

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: move the L2 cache-controller inside the SoC node

Link: https://lore.kernel.org/r/7h7dsikjyt.fsf@baylibre.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.10, round 1

Highlights:
----------

MCU part:
 -Some changes on stm32h743: enable display controler, add SPI resets,
  use "st,stm32h7-uart" compatible.

MPU part:
 -Add new Odyssey SOM board based on STM32MP157CAC. It embeds 4GB eMMC, 512
  MB DDR3 RAM, USB and ETH connectors and a combo wifi/BT (AP6236 chip).
 -Add FMC2 EBI support on EV1 board.
 -Add arm-pmu node.
 -LXA:
  -Change ethernet phy delays to avoid kernel warnings.
  -Enable DDR50 eMMC mode.
 -DH:
  -Add new DH DRC02 unit board.
  -Add USB OTG support on PDK2 board.
  -Use uart8 RTS/CTS on PDK2 board.
  -Fix display PWM channel on PDK2 board.
  -Swap phy reset line and touchscreen irq on DHCOM SOM.
  -Drop QSPI CS2 on DHCOM SOM.
  -Update SDMMC pin config on AV96.
  -Enable uart7 RTS/CTS on AV96.

* tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: add arm-pmu node on stm32mp15
  ARM: dts: stm32: add FMC2 EBI support for stm32mp157c
  ARM: dts: stm32: lxa-mc1: enable DDR50 mode on eMMC
  ARM: dts: stm32: Fix DH PDK2 display PWM channel
  ARM: dts: stm32: Enable RTS/CTS for DH AV96 UART7
  ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
  ARM: dts: stm32: use stm32h7 usart compatible string for stm32h743
  ARM: dts: stm32: add resets property to spi device nodes on stm32h743
  ARM: dts: stm32: add display controller node to stm32h743
  ARM: dts: stm32: Enable RTS/CTS for DH PDK2 UART8
  ARM: dts: stm32: Drop QSPI CS2 pinmux on DHCOM
  ARM: dts: stm32: Add STM32MP1 UART8 RTS/CTS pinmux
  ARM: dts: stm32: add initial support for stm32mp157-odyssey board
  dt-bindings: arm: stm32: document Odyssey compatible
  dt-bindings: vendor-prefixes: add Seeed Studio
  ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays
  ARM: dts: stm32: Add USB OTG support to DH PDK2
  ARM: dts: stm32: Fix sdmmc2 pins on AV96
  ARM: dts: stm32: Add DHSOM based DRC02 board
  ARM: dts: stm32: Move ethernet PHY into DH SoM DT

Link: https://lore.kernel.org/r/7e2a93c9-cf37-bc93-ed6e-d9cb1808b7a3@st.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.10

Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.

Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.

Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.

Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.

Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.

Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.

Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.

* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
  arm64: dts: qcom: sm8250: Add thermal zones and throttling support
  arm64: dts: qcom: sm8250: Add cpufreq hw node
  arm64: dts: qcom: sdm845: Add interconnects property for display
  arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
  arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
  arm64: dts: qcom: sm8250: add interconnect nodes
  arm64: dts: qcom: sm8150: add interconnect nodes
  arm64: dts: qcom: sc7180: Increase the number of interconnect cells
  arm64: dts: qcom: sdm845: Increase the number of interconnect cells
  arm64: dts: qcom: Makefile: Sort lines
  arm64: dts: qcom: pm8916: Sort nodes
  arm64: dts: qcom: msm8916: Sort nodes
  arm64: dts: qcom: msm8916: Pad addresses
  arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
  arm64: dts: qcom: msm8916: Use more generic node names
  arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
  arm64: dts: qcom: msm8916: Minor style fixes
  arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
  arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
  arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
  ...

Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.

* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
  arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
  arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
  dt-bindings: Add doc for FriendlyARM NanoPi R2S
  arm64: dts: rockchip: replace status value "ok" by "okay"
  arm64: dts: rockchip: fix cpu-supply for rk3328-evb
  arm64: dts: rockchip: add rk3318 A95X Z2 board
  dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
  dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
  arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
  arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
  arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
  dt-bindings: arm: rockchip: Update ROCKPi 4 binding
  arm64: dts: rockchip: change spdif fallback compatible on rk3308
  arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc

Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree change for 5.10:

- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
  VAR-SOM-MX8MN SoM and Symphony board.
- Add NWL MIPI DSI controller support for i.MX8MQ.
- Several series from Krzysztof Kozlowski to clean and fix up i.MX8
  based device trees according to DT schema.
- A series from Michael Walle to add sl28cpld support for Kontron sl28
  device based on LS1028A.
- Add two parameters for Samsung picophy tuning on imx8mm-evk and
  imx8mn-evk boards.
- Add more thermal zones for Layerscape SoCs.
- Various random update and minor fix-ups.

* tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
  arm64: dts: imx8mq-librem5: correct GPIO hog property
  arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC
  arm64: dts: imx8mq: correct interrupt flags
  arm64: dts: imx8mn: correct interrupt flags
  arm64: dts: imx8mm: correct interrupt flags
  arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts
  arm64: dts: layerscape: correct watchdog clocks for LS1088A
  arm64: dts: freescale: sl28: enable fan support
  arm64: dts: freescale: sl28: enable LED support
  arm64: dts: freescale: sl28: map GPIOs to input events
  arm64: dts: freescale: sl28: enable sl28cpld
  arm64: dts: imx8mq-evk: Add MIPI DSI support
  arm64: dts: layerscape: Add label to pcie nodes
  arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN
  arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module
  arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration
  arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration
  arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties
  arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp
  arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x
  ...

Link: https://lore.kernel.org/r/20200923073009.23678-5-shawnguo@kernel.org


Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX arm32 device tree change for 5.10:

- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
  Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
  schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
  adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
  i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
  imx6sll-evk board, add headphone detection for sound card on a few NXP
  development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.

* tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
  ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
  ARM: dts: imx6q-logicpd: Use GPIO chipselect
  ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
  ARM: dts: imx6q-logicpd: Add a specific board compatible string
  ARM: dts: imx6q: align GPIO hog names with dtschema
  ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
  ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
  ARM: dts: imx6qdl-tqma6: fix indentation
  ARM: dts: imx28-m28: Align GPMI NAND node name with schema
  ARM: dts: imx6qdl: add enet_out clk support
  ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node
  ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1
  ARM: dts: imx: add devicetree for Tolino Shine 2 HD
  ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells
  ARM: dts: imx6sll-evk: Add audio sound card node
  ARM: dts: imx6sl-evk: Add headphone detection for sound card
  ARM: dts: imx6sx-sdb: Add headphone detection for sound card
  ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects
  ARM: dts: imx: Fix the SPI chipselect polarity
  ARM: dts: imx25-pinfunc: Fix GPT function names
  ...

Link: https://lore.kernel.org/r/20200923073009.23678-4-shawnguo@kernel.org


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-bindings-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.10:

- Various board compatible string additions to fsl.ymal.
- Update Vybrid OCOTP binding for syscon compatible string, which is
  required to access the UID.

* tag 'imx-bindings-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MN
  dt-bindings: arm: fsl: Add PHYTEC i.MX6 devicetree bindings
  dt-bindings: arm: fsl: Add PHYTEC i.MX6 UL/ULL devicetree bindings
  dt-bindings: arm: fsl: Add an entry for the i.MX6 LogicPD board
  dt-bindings: arm: fsl: Fix matching Purism Librem5 phones
  dt-bindings: arm: fsl: Add imx8mm ddr4 evk board
  dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD
  dt-bindings: nvmem: Add syscon to Vybrid OCOTP driver
  dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MM
  dt-bindings: arm: fsl: Add binding for Variscite VAR-SOM-MX8MM module
  dt-bindings: arm: fsl: Add ZII Ultra boards binding
  dt-bindings: arm: fsl: Fix Toradex Colibri i.MX 8 binding
  dt-bindings: arm: fsl: Add Beacon i.MX8M Mini Development Kit binding
  dt-bindings: arm: fsl: Add the librem 5 phone
  dt-bindings: arm: fsl: Add Y Soft IOTA Orion board

Link: https://lore.kernel.org/r/20200923073009.23678-3-shawnguo@kernel.org


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt

Device tree updates towards 5.10-rc1 for TI K3 platform.

* tag 'ti-k3-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (23 commits)
  arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances
  arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
  arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings
  arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name
  arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640
  arm64: dts: ti: k3-*: Use generic pinctrl for node names
  arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names
  arm64: dts: ti: k3-am65*: Use generic gpio for node names
  arm64: dts: ti: k3-am65-main: Use lower case hexadecimal
  arm64: dts: ti: k3-j721e: Use lower case hexadecimal
  arm64: dts: ti: k3-am65: restrict PCIe to Gen2 speed
  arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS cores
  arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSP
  arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP
  arm64: dts: ti: k3-j721e-main: Add C71x DSP node
  arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs
  arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs
  arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes
  arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts file
  arm64: dts: ti: k3-j721e-main: Add crypto accelerator node
  ...

Link: https://lore.kernel.org/r/20200922134722.2y5kqxu4lghbwp5u@akan


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.10, part two

Minor cleanups: removal of undocumented I2S properties, alignment of OPP
table node name with dtschema.

* tag 'samsung-dt64-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Align OPP table name with dt-schema
  arm64: dts: exynos: Remove undocumented i2s properties in Exynos5433

Link: https://lore.kernel.org/r/20200920160705.9651-4-krzk@kernel.org


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.10, part two

1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
   This fixes many minor dtschema violations, adds few missing
   functionalities (like clock for RTC) and improves the code
   maintainability in few places. Except the RTC clock, this should not
   have visible impact.
2. Fix few remaining Exynos dtschema violations.

* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
  ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
  ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
  ARM: dts: s5pv210: move fixed regulators under root node in Goni
  ARM: dts: s5pv210: move fixed regulators under root node in Aquila
  ARM: dts: exynos: Align OPP table name with dt-schema
  ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
  ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
  ARM: dts: exynos: add input clock to CMU in Exynos3250
  ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
  ARM: dts: s3c24xx: add address to CPU node
  ARM: dts: s3c24xx: align PWM/timer node name with dtschema
  ARM: dts: s3c24xx: override nodes by label
  ARM: dts: s3c24xx: fix number of PWM cells
  ARM: dts: s3c6410: remove additional CPU compatible
  ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
  ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
  ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
  ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
  ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
  ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
  ...

Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Changes for v5.10-rc1

This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.

It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.

* tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Initial Tegra234 VDK support
  arm64: tegra: Populate EEPROMs for Jetson Xavier NX
  arm64: tegra: Add label properties for EEPROMs
  arm64: tegra: Add DT binding for AHUB components
  arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
  arm64: tegra: Properly size register regions for GPU on Tegra194
  arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
  arm64: tegra: Describe display controller outputs for Tegra210
  arm64: tegra: Disable SD card write-protection on Jetson Nano
  arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
  arm64: tegra: Wire up pinctrl states for all DPAUX controllers
  arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier

Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.10-rc1

This set of changes adds compatible strings for Tegra234 to existing
device tree bindings.

* tag 'tegra-for-5.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
  dt-bindings: tegra: pmc: Add Tegra234 support
  dt-bindings: fuse: tegra: Add Tegra234 support
  dt-bindings: tegra: Add Tegra234 VDK compatible
  dt-bindings: misc: tegra186-misc: Add Tegra234 support
  dt-bindings: misc: tegra186-misc: Add missing compatible string
  dt-bindings: misc: tegra-apbmisc: Add missing compatible strings

Link: https://lore.kernel.org/r/20200918150303.3938852-1-thierry.reding@gmail.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.10

  - Document core support for the R-Car V3U (R8A779A0) SoC and the
    Renesas Falcon CPU and BreakOut boards.

* tag 'renesas-dt-bindings-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: arm: renesas: Document Renesas Falcon boards
  dt-bindings: reset: renesas,rst: Document r8a779a0 reset module
  dt-bindings: power: renesas,rcar-sysc: Document r8a779a0 SYSC bindings
  dt-bindings: arm: renesas: Document R-Car V3U SoC DT bindings

Link: https://lore.kernel.org/r/20200918124800.15555-5-geert+renesas@glider.be


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.10 (take two)

  - PCIe endpoint support for the RZ/G2H SoC,
  - SATA support for the HopeRun HiHope RZ/G2H board,
  - Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
    the iWave Qseven board (G21D), and its camera add-on board,
  - Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
    boards,
  - HDMI display and sound support for the R-Car M3-W+ SoC on the
    Salvator-XS board,
  - Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
  - Minor fixes and cleanups.

* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
  arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
  arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
  arm64: dts: renesas: r8a77990: Add DRIF support
  ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
  ARM: dts: r8a7742: Add VSP support
  arm64: dts: renesas: Drop superfluous pin configuration containers
  arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
  arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
  arm64: dts: renesas: r8a77961: Add HDMI device nodes
  arm64: dts: renesas: r8a77961: Add DU device nodes
  arm64: dts: renesas: r8a77961: Add VSP device nodes
  arm64: dts: renesas: r8a77961: Add FCP device nodes
  arm64: dts: renesas: Fix pin controller node names
  ARM: dts: renesas: Fix pin controller node names
  arm64: dts: renesas: Add Renesas Falcon boards support
  arm64: dts: renesas: Add Renesas R8A779A0 SoC support
  ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
  ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
  ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
  ARM: dts: r8a7742: Add VIN DT nodes
  ...

Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be


Signed-off-by: Olof Johansson <olof@lixom.net>

The Synopsys DesignWare APB GPIO controller port must have gpio-cells
property, as pointed by dtschema:

  arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000: gpio-controller@0: '#gpio-cells' is a required property

Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org


Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:

  arch/arm64/boot/dts/apm/apm-mustang.dt.yaml: gpio@1c024000:
    'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'

Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org


Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:

  arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dt.yaml: gpio@20000:
    'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'

Link: https://lore.kernel.org/r/20200917164909.22490-1-krzk@kernel.org


Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add ARCH_PICOXCELL entries to Makefil so the DTBs get built with
`make dtbs`.

Link: https://lore.kernel.org/r/20200917163957.21895-1-krzk@kernel.org


Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

AT91 DT for 5.10

 - New board: GARDENA smart Gateway (Art. 19000)
 - dtbs_check warnings fixes

* tag 'at91-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d2: add missing flexcom spi node properties
  ARM: dts: at91: add unit-address to memory node
  ARM: dts: at91: move mmc pinctrl-names property to board dts
  ARM: dts: at91: fix sram nodes
  ARM: dts: at91: fix cpu node
  ARM: at91: Add GARDENA smart Gateway (Art. 19000) support
  dt-bindings: arm: at91: Add GARDENA smart Gateway (Art. 19000) board

Link: https://lore.kernel.org/r/20200916211348.GA275895@piout.net


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.10
- Increase shared-dma-pool size to 32MB
- Add ptp_ref clock properties to the ethernet nodes on Stratix10 and Agilex

* tag 'socfpga_dts_update_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: stratix10/agilex: add the ptp_ref clock
  arm64: dts: agilex: increase shared memory size to 32Mb

Link: https://lore.kernel.org/r/20200916204422.30897-1-dinguyen@kernel.org


Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dts-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS updates for the v5.10 kernel cycle:

- Add the s6e63m0 display to the Golden device
- Add the KTD253 backlight to the Skomer device
- Update the LP5521 LED DTS entries for binding changes

* tag 'ux500-dts-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  ARM: dts: ux500-skomer: Add KTD253 backlight
  ARM: dts: ux500-golden: Add S6E63M0 DSI display

Link: https://lore.kernel.org/r/CACRpkda=-cgFjN7K2vBU5x4uSYrohrZSbjqMnSFb3Qe2Az1W5g@mail.gmail.com


Signed-off-by: Olof Johansson <olof@lixom.net>

Sparx5 DT updates for Linux 5.10

- Add public repo to MAINTAINERS
- Add SPI controller and devices
- Add eMMC controller and devices
- Add temperature sensor

* tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream:
  arm64: dts: sparx5: Add spi-nand devices
  arm64: dts: sparx5: Add spi-nor support
  arm64: dts: sparx5: Add SPI controller and associated mmio-mux
  MAINTAINERS: Add git tree for Sparx5
  arm64: dts: sparx5: Add hwmon temperature sensor
  arm64: dts: sparx5: Add Sparx5 eMMC support

Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com


Signed-off-by: Olof Johansson <olof@lixom.net>