- May 11, 2022
-
-
Matt Roper authored
Add the reset support for new copy engines in PVC. Bspec: 52549 Original-author: CQ Tang Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-11-matthew.d.roper@intel.com
-
Matt Roper authored
Add the interrupt handler support for new copy engines. Bspec: 54030 Original-author: CQ Tang Signed-off-by:
-
Matt Roper authored
This patch adds the basic definitions needed to support new copy engines. Also updating the cmd_info to accommodate new engines, as the engine id's of legacy engines have been changed. v2: - Add _BCS(n) definition, similar to other engines. (Tvrtko) - Add I915_MAX_BCS definition, similar to other engnes. (Prathap) - Move GVT change to avoid u16 overflow to its own patch. (Tvrtko) Original-author: CQ Tang Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
-
Matt Roper authored
When i915 adds additional PVC blitter instances (in an upcoming patch), the definition of VECS0 will change from bit(10) to bit(18), causing GVT's R_ALL mask to overflow the u16 storage that's currently used. Let's replace the u16 with an intel_engine_mask_t to ensure we avoid this. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-8-matthew.d.roper@intel.com
-
John Harrison authored
PVC adds extra blitter engines (in the following patch). The reset selftest has a local array on the stack which is sized by the number of engines. The increase pushes the size of this array to the point where it trips the 'stack too large' compile warning. This patch takes the allocation of the stack and makes it dynamic instead. v2 (MattR): - Minor cosmetic changes: re-sort definition and allocate using kmalloc_array(). (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Matt Roper authored
The SoC registers, including RP_STATE_CAP, have moved to a new location in GTTMMADR on Ponte Vecchio. We need to update the register offset accordingly. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220505213812.3979301-5-matthew.d.roper@intel.com
-
Ayaz A Siddiqui authored
v2 (MattR): - Clarify comment above RING_CMD_CCTL programming. - Remove bspec reference from field definition. (Lucas) - Add WARN if we try to use a (presumably uninitialized) wb_index of 0. On most platforms 0 is an invalid MOCS entry and even on the ones where it isn't, it isn't the right setting for wb_index. (Lucas) Bspec: 45101, 72161 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Ayaz A Siddiqui <ayaz.siddiqui@intel.com> Signed-off-by:
Fei Yang <fei.yang@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Commit e4e80625 ("drm/i915: Change shrink ordering to use locking around unbinding.") changed the return type to int without changing the return values or their meaning to "0 is success". Move it back to boolean. Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220503061556.513175-1-lucas.demarchi@intel.com
-
- May 09, 2022
-
-
Tvrtko Ursulin authored
If i915 does not want to use huge pages there is a) no point in setting up the private mount and b) should former fail, it is misleading to log THP support is disabled in the caller, which does not even know if callee tried to enable it. Fix both by restructuring the flow in i915_gemfs_init and at the same time note the failure to set it up in all cases. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429100414.647857-2-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
We have a statement from HW designers that the GPU read regression when using 2M pages was fixed from Icelake onwards, which was also confirmed by bencharking Eero did last year: """ When IOMMU is disabled, enabling THP causes following perf changes on TGL-H (GT1): 10-15% SynMark Batch[0-3] 5-10% MemBW GPU texture, SynMark ShMapVsm 3-5% SynMark TerrainFly* + Geom* + Fill* + CSCloth + Batch4 1-3% GpuTest Triangle, SynMark TexMem* + DeferredAA + Batch[5-7] + few others -7% MemBW GPU blend In the above 3D benchmark names, * means all the variants of tests with the same prefix. For example "SynMark TexMem*", means both TexMem128 & TexMem512 tests in the synthetic (Intel internal) SynMark test suite. In the (public, but proprietary) GfxBench & GLB(enchmark) test suites, there are both onscreen and offscreen variants of each test. Unless explicitly stated otherwise, numbers are for both variants. All tests are run with FullHD monitor. All tests are fullscreen except for GLB and GpuTest ones, which are run in 1/2 screen window (GpuTest triangle is run both in fullscreen and 1/2 screen window). """ Since the only regression is MemBW GPU blend, against many more gains, it sounds it is time to enable THP on Gen11+. Signed-off-by:
-
- May 07, 2022
-
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as all platforms with display version 9 or newer has this feature. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as the requirement to support it is the DDI support. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as all platforms with display version 9 or newer, haswell or broadwell supports it. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as all platforms with graphics version 11 or newer has this feature. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as all platforms with graphics version 7 or newer can reset engines. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as all platforms with graphics version 6 or newer have software support for this feature. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
José Roberto de Souza authored
No need to have this parameter in intel_device_info struct as all platforms with graphics version 9 or newer has graphics microcontroller. As a side effect of the of removal this flag, it will not be printed in dmesg during driver load anymore and developers will have to rely on to check the macro and compare with platform being used and IP versions of it. Reviewed-by:
-
- May 06, 2022
-
-
YueHaibing authored
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’: drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration] 276 | u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Move sysfs_gt_attribute_* macros out of #ifdef block to fix this. Fixes: 56a709cf ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Tvrtko Ursulin authored
DRM_DEBUG_WARN_ON should only be used when we are certain CI is guaranteed to exercise a certain code path, so in case of values coming from MMIO reads we cannot be sure CI will have all the possible SKUs and parts, or that it will catch all possible error conditions. Use drm_warn instead. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220505110007.943449-2-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
DRM_DEBUG_WARN_ON should only be used when we are certain CI is guaranteed to exercise a certain code path, so in case of values coming from MMIO reads we cannot be sure CI will have all the possible SKUs and parts. Use drm_warn instead and move logging to init phase while at it. v2: * GEM_WARN_ON in intel_gt_get_valid_steering. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The previous patch introduced new failure cases in the HuC init flow that can be hit by simply changing the config, so we want to avoid failing the probe in those scenarios. HuC load failure is already considered a non-fatal error and we have a way to report to userspace if the HuC is not available via a dedicated getparam, so no changes in expectation there. The error message in the HuC init code has also been lowered to info to avoid throwing error message for an expected behavior. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
HuC loading via GSC is performed via a PXP command sent through the mei modules, so we need both MEI_GSC and MEI_PXP to be available. Given that the GSC will do both the transfer and the authentication, the legacy HuC loading paths can be safely skipped. Also note that the GSC-loaded HuC survives GT reset. v2: move the huc_is_authenticated() function to this patch. Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-4-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
On newer platforms (starting DG2 G10 B-step and G11 A-step), ownership of HuC loading has been moved from the GuC to the GSC. As part of the change, the header format of the HuC binary has been updated and does not match the GuC anymore. The GSC will perform all the required checks on the binary size, so we only need to check that the version matches. Note that since we still haven't added any gsc-loaded FWs, the loaded_via_gsc variable will always be kept to its initialization value of zero. v2: Add a note about loaded_via_gsc being zero (Alan) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The function name is confusing, because it doesn't check the actual auth status in HW but the SW status. Given that there is only one user (the huc_auth function itself), just get rid of it and use the FW status checker directly. Signed-off-by:
-
Matthew Brost authored
In GuC submission mode the EU priority must be updated by the GuC rather than the driver as the GuC owns the programming of the context descriptor. Given that the GuC code uses the GuC priorities, we can't use a generic function using i915 priorities for both execlists and GuC submission. The existing function has therefore been pushed to the execlists back-end while a new one has been added for GuC. v2: correctly use the GuC prio. Cc: John Harrison <john.c.harrison@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by:
-
- May 04, 2022
-
-
Karol Herbst authored
i915_vma_reopen checked if the vma is closed before without taking the lock. So multiple threads could attempt removing the vma. Instead the lock needs to be taken before actually checking. v2: move struct declaration Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.3+ Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5732 Signed-off-by:
Karol Herbst <kherbst@redhat.com> Fixes: 155ab883 ("drm/i915: Move object close under its own lock") Reviewed-by:
-
Kefeng Wang authored
Use IOMEM_ERR_PTR() instead of self defined IO_ERR_PTR(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Stuart Summers authored
Additional blitter and media engines will be enabled later. Bspec: 44481, 44482 Signed-off-by:
-
- May 03, 2022
-
-
Tvrtko Ursulin authored
Use lockdep_assert_not_held to simplify and correct the code. Otherwise false positive are hit if lock state is uknown like after a previous taint. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Remove the duplicate and incorrect (uses "" instead of <>) linux/string_helpers.h include. Fixes: cc1338f2 ("drm/i915/xehp: Update topology dumps for Xe_HP") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Ramalingam C authored
Capture the eviction details for Flat-CCS capable, lmem objects. v2: Fix the Flat-ccs capbility of lmem obj with smem residency possibility [Thomas] v3: Fixed the suggestions [Matt] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Ramalingam C authored
Calculate the ccs_sz that needs to be emitted based on the src and dst pages emitted per chunk. And handle the return value of emit_pte for the ccs pages. v2: ccs_sz moved to the reduced scope [Matt] Signed-off-by:
-
- May 02, 2022
-
-
Chris Wilson authored
Userspace may leave predication enabled upon return from the batch buffer, which has the consequent of preventing all operation from the ring from being executed, including all the synchronisation, coherency control, arbitration and user signaling. This is more than just a local gpu hang in one client, as the user has the ability to prevent the kernel from applying critical workarounds and can cause a full GT reset. We could simply execute MI_SET_PREDICATE upon return from the user batch, but this has the repercussion of modifying the user's context state. Instead, we opt to execute a fixup batch which by mixing predicated operations can determine the state of the SET_PREDICATE_RESULT register and restore it prior to the next userspace batch. This allows us to protect the kernel's ring without changing the uABI. Suggested-by:
Zbigniew Kempczynski <zbigniew.kempczynski@intel.com> Signed-off-by:
Chris Wilson <chris.p.wilson@intel.com> Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com> Cc: Thomas Hellstrom <thomas.hellstrom@intel.com> Signed-off-by:
-
Chris Wilson authored
When predication is enabled all commands baring a few (such as MI_BB_END) are nop'ed. If we accidentally enable predication while poisoning the context, not only is the rest of the poisoning skipped (thus disabling the test), but the closing instructions of the poison request are nop'ed. Not only do we then not signal the waiting context, but we even prevent re-enabling arbitration and the GPU will not perform a context switch at the end of the request. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Suggested-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
When bit 19 of MI_LOAD_REGISTER_IMM instruction opcode is set on tgl+ devices, HW does not care about certain register address offsets, but instead check the following for valid address ranges on specific engines: RCS && CCS: BITS(0 - 10) BCS: BITS(0 - 11) VECS && VCS: BITS(0 - 13) Also, tgl+ now support relative addressing for BCS engine - So, this patch fixes issue with live_gt_lrc selftest that is failing where there is mismatch between LRC register layout generated during init and HW default register offsets. Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
-
- Apr 30, 2022
-
-
Daniele Ceraolo Spurio authored
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Jordan Justen <jordan.l.justen@intel.com> Tested-by: Jordan Justen <jordan.l.justen@intel.com> # mesa anvil & iris Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-5-matthew.d.roper@intel.com
-
Matt Roper authored
We're now ready to start exposing compute engines to userspace. v2: - Move kerneldoc for other engine classes to a separate patch. (Andi) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Szymon Morek <szymon.morek@intel.com> UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14395 Signed-off-by:
-
Matt Roper authored
Compute engines have a separate register that the driver should use to perform MMIO-based TLB invalidation. Note that the term "context" in this register's bspec description is used to refer to the engine instance (in the same way "context" is used on bspec 46167). Bspec: 43930 Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-3-matthew.d.roper@intel.com
-
Matt Roper authored
We'll be adding a new type of engine soon. Let's document the existing engine classes first to help make it clear what each type of engine is used for. Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
- Apr 29, 2022
-
-
Umesh Nerlige Ramappa authored
Use intel_uncore_read64_2x32 to read upper and lower fields of the GPM timestamp. v2: Fix compile error Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
-
