- Jul 17, 2022
-
-
Christian Marangi authored
Add speedbin efuse nvmem cell needed for the opp table for the CPU freqs. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Tested-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220707010943.20857-10-ansuelsmth@gmail.com
-
Christian Marangi authored
Add some tag for gsbi to make them usable for ipq8064 SoC. Add missing gsbi7 i2c node and gsbi1 node. Signed-off-by:
-
Christian Marangi authored
The current value for pci IO is problematic for ath10k wifi card commonly connected to ipq8064 SoC. The current value is probably a typo and is actually uncommon to find 1MB IO space even on a x86 arch. Also with recent changes to the pci driver, pci1 and pci2 now fails to function as any connected device fails any reg read/write. Reduce this to 64K as it should be more than enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT hardcoded for the ARM arch. Signed-off-by:
-
Christian Marangi authored
Disable usb phy by default. When the usb phy were pushed, half of them were flagged as disabled by mistake. Correctly disable all usb phy and enable them only if a device actually use them. Signed-off-by:
-
Christian Marangi authored
Add missing snps,dwmac compatible for gmac ipq8064 dtsi. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
-
Christian Marangi authored
Add specific ipq8064 dtsi with smb208 rpm regulators. Qcom advise to use this configuration but it's not mandatory and OEM can decide to implement their own regulators. smb208 regulators are used to scale CPU voltage, L2 cache voltage and Ubi32 cores. There regulators are controlled by rpm and to correctly works gsbi4-i2c require to be NEVER disabled or rpm will reject any regulator change request. Signed-off-by:
-
Christian Marangi authored
Add gsbi6 missing definition for ipq8064. Signed-off-by:
-
Christian Marangi authored
Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4 pins and rgmii2 pins for ipq8064. Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064 dtsi. Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to ipq8064 dtsi. Signed-off-by:
-
André Almeida authored
Nexus 5 has a RGB LED connected to the TRILED and hence channels 7, 6 and 5 of the LPG. Add a node describing this. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Signed-off-by:
André Almeida <andrealmeid@collabora.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Luca Weiss authored
FP2 has a RGB LED connected to the TRILED and hence channels 7, 6 and 5 of the LPG. Add a node describing this. Signed-off-by:
-
Bjorn Andersson authored
Both Castor and Honami has RGB LEDs driven by the PM8941 LPG, define these. Signed-off-by:
-
Bjorn Andersson authored
The PM8941 contains 8 LPG channels, as well as TRILED and LUT blocks. Add a node for these. Signed-off-by:
-
Johan Hovold authored
Three SoCs did not follow the interrupt order specified by the USB controller binding. While keeping the non-SuperSpeed interrupts together seems natural, reorder the interrupts to match the binding. Acked-by:
Johan Hovold <johan+linaro@kernel.org> [bjorn: Split out from arm64 patch] Signed-off-by:
-
- Jul 14, 2022
-
-
Dmitry Baryshkov authored
Create separate device node for thermal sensors on apq8064 platform. Move related properties to the newly created device tree node. This harmonizes apq8064 and ipq8064 device trees and allows gcc device to be probed earlier by removing dependency on QFPROM nodes. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
- Jul 07, 2022
-
-
Dmitry Baryshkov authored
Rename the GPU's opp table node to make it follow the display/msm/gpu.yaml schema. Signed-off-by:
-
Dmitry Baryshkov authored
Disable DSI and DSI PHY devices by default. The only actual user, Nexus 7, already contains `status = "okay"` property in the respective devices nodes. Signed-off-by:
-
Dmitry Baryshkov authored
Follow the usual scheme and use name 'iface' rather than 'iface_clk' for the interface clock. The DSI PHY driver can cope with both of them, so there is no breakage. Signed-off-by:
-
David Heidelberg authored
First device specific compatible, then general one. Reviewed-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
-
- Jul 03, 2022
-
-
Bhupesh Sharma authored
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports issues with inconsistent 'sdhci@' convention used for specifying the sdhci nodes. The generic mmc bindings expect 'mmc@' format instead. Fix the same. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> [bjorn: Extracted from combined arm64 patch] Signed-off-by:
-
- Jul 01, 2022
-
-
Dmitry Baryshkov authored
The HDMI driver doesn't use the phy-names to identify the PHY. Different Qualcomm platforms have used different names for the PHY. So, we are deprecating phy-names propertty of the HDMI device and dropping them from existing DTs. Signed-off-by:
-
Dmitry Baryshkov authored
The HDMI circuitry on the IFC6410 is not powered by the 3v3. Drop the hdmi-mux-supply property. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The PM8841 temperature sensor has to define thermal-sensor-cells. Fixes: dab8134c ("ARM: dts: qcom: Add PM8841 functions device nodes") Signed-off-by:
-
Krzysztof Kozlowski authored
The OCMEM bindings require ranges property. Fixes: a2cc991e ("ARM: dts: qcom: msm8974: add ocmem node") Signed-off-by:
-
Krzysztof Kozlowski authored
Add proper compatibles to the IMEM device node: 1. syscon to allow accessing memory from other devices, 2. dedicated compatible as required for syscon and simple-mfd nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
syscon compatible must be preceded with a specific compatible, to accurately describe the device. Signed-off-by:
-
Krzysztof Kozlowski authored
syscon compatible must be preceded with a specific compatible, to accurately describe the device. Signed-off-by:
-
Krzysztof Kozlowski authored
According to Devicetree specification, the device nodes should be generic, reflecting the function of the device. The typical name for memory regions is "sram". Signed-off-by:
-
Krzysztof Kozlowski authored
Add common LED property - the function - to LED nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Add common LED property - the color - to LED node. Signed-off-by:
-
Krzysztof Kozlowski authored
Add common LED properties - the function and color - to LED nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Add common LED property - the color - to LED node. Signed-off-by:
-
Krzysztof Kozlowski authored
Add common LED properties - the function and color - to LED nodes. Signed-off-by:
-
Manivannan Sadhasivam authored
The trigger type should be LEVEL_HIGH. So fix it! Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Luca Weiss authored
IRQ_TYPE_NONE is invalid, so use the correct interrupt type. Signed-off-by:
-
Luca Weiss authored
BAM DMUX is used as the network interface to the modem. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
- Jun 30, 2022
-
-
Krzysztof Kozlowski authored
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by:
-
Krzysztof Kozlowski authored
Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by:
-
Krzysztof Kozlowski authored
The proper compatible for Micron n25q128a11 SPI NOR flash should include vendor-prefix and use jedec,spi-nor fallback. Signed-off-by:
-
Krzysztof Kozlowski authored
QFPROM children have 'reg' so they must have unit address. Signed-off-by:
-
Krzysztof Kozlowski authored
Cleanup coding style of QFPROM nodes - put compatible as first property and drop tabs before '=' character. Signed-off-by:
-
