- Oct 06, 2017
-
-
Emmanuel Grumbach authored
When we have an AP which supports HT and a single HT station is connected, we change the min_width from NL80211_CHAN_WIDTH_20_NOHT to NL80211_CHAN_WIDTH_20. This of course has no implication on the channel width but still sends a command to the firmware. Remember the last width that was sent and refrain from sending unnecessary commands to the firmware. Sending a PHY_CTXT_CMD to the firmware has a cost since it recalculates the presence on the medium and because of that it closes the transmit queues for a short while. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Chaya Rachel Ivgi authored
The driver reads xtal_calib from NVM file, but actually never uses it. This is only used in dvm driver. Signed-off-by:
Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Devices in the A000 family can use a different size for the command queue. To allow this, make the command queue size configurable and set the size for A000 devices to 32. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
-
Ilan Peer authored
This would enable to better catch timing issues with cases that WRT dump takes too much time. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
The trigger that collects data when a frame is released because of the timer of the reordering buffer was not implemented for 9000 devices. Fix this. Signed-off-by:
-
Emmanuel Grumbach authored
This was never used by any product. Remove it. Signed-off-by:
-
David Spinadel authored
New quota command adds a field indicating low latency direction per quota. A TLV API bit was added to indicate the new API. Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
-
Oren Givon authored
Add a new a000 device with PCI ID (0x2720, 0x0030). Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Oren Givon authored
The PCI ID (0x2720, 0x0070) was set with the config struct iwla000_2ax_cfg_hr instead of iwla000_2ac_cfg_hr_cdb. Fixes: 175b87c6 ("iwlwifi: add the new a000_2ax series") Signed-off-by:
-
Luca Coelho authored
De-inline iwl_trans_ref/unref and move it to common transport code in preparation for more common code to come to these functions. Signed-off-by: -
Liad Kaufman authored
Add a dbgfs entry for an easy way during runtime to check what FW file was loaded, and get some general FW-related data. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
- Oct 02, 2017
-
-
Kevin Cernekee authored
brcmf_fweh_process_event() sets event->datalen to the endian-swapped value of event_packet->msg.datalen, which is the same as emsg.datalen. This length is already validated in brcmf_fweh_process_event(), so there is no need to check it again upon dequeuing the event. Suggested-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Kevin Cernekee authored
In brcmf_p2p_notify_rx_mgmt_p2p_probereq(), chanspec is assigned before the length of rxframe is validated. This could lead to uninitialized data being accessed (but not printed). Since we already have a perfectly good endian-swapped copy of rxframe->chanspec in ch.chspec, and ch.chspec is not modified by decchspec(), avoid the extra assignment and use ch.chspec in the debug print. Suggested-by:
Mattias Nissler <mnissler@chromium.org> Signed-off-by:
-
- Sep 25, 2017
-
-
Colin Ian King authored
Don't populate const arrays on the stack, instead make them static. Makes the object code smaller by over 60 bytes: Before: text data bss dec hex filename 14816 1296 0 16112 3ef0 b43/phy_ht.o After: text data bss dec hex filename 14551 1496 0 16047 3eaf b43/phy_ht.o (gcc 6.3.0, x86-64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate const array ac_to_fifo on the stack in an inlined function, instead make it static. Makes the object code smaller by over 800 bytes: text data bss dec hex filename 159029 33154 1216 193399 2f377 4965-mac.o text data bss dec hex filename 158122 33250 1216 192588 2f04c 4965-mac.o (gcc version 7.2.0 x86_64) Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Igor Mitsyanko authored
Wireless device may send "channel changed" event before driver registered this device with wireless core, which will result in warnings. Once device is registered, higher layer will query channel info manually using .get_channel callback. Signed-off-by:
Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by:
-
Igor Mitsyanko authored
There are no users of this field and it can safely be removed. Signed-off-by:
-
Igor Mitsyanko authored
It is never used for anything useful, and all logic is handled by either WiFi card or higher layers. Signed-off-by:
-
Igor Mitsyanko authored
Do not assume whether wireless device can or can not handle switching several interfaces on a single radio to different channels. Device will handle it itself and will return appropriate error code. Signed-off-by:
-
Igor Mitsyanko authored
No reason to verify channel switch request in driver, it can simply be forwarded to wireless device. Device can perform required checks and return appropriate error code, and driver may not even have information on current operational channel. Signed-off-by:
-
Igor Mitsyanko authored
This makes no sense because real operational channel is choosen based on AP operation, not on what STA is configured to. Signed-off-by:
-
Igor Mitsyanko authored
Do not try to cache current operational channel info in driver, this is a potential source of synchronization issues + driver does not really need that info. Introduce GET_CHANNEL command and process it appropriately. Signed-off-by:
-
Igor Mitsyanko authored
Specifically, it has to report center frequency, secondary center frequency (for 80+80) and BW. Introduce channel definition structure to qlink and modify channel change event processing function accordingly. Signed-off-by:
-
Igor Mitsyanko authored
This will allow to use qlink channel width values to specify BW setting corresponding to enum nl80211_chan_width. Current user is converted to apply BIT() macro manually to each individual qlink_channel_width enumeration value. Signed-off-by:
-
Karun Eagalapati authored
SDIO suspend and resume handlers are implemented and verified that device works after suspend/resume cycle. Signed-off-by:
Karun Eagalapati <karun256@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
-
Pavani Muthyala authored
We will dump information about firmware version, firmware file name and operating mode during initialization. Signed-off-by:
Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only const array tos_to_ac on the stack, instead make it static. Makes the object code smaller by 250 bytes: Before: text data bss dec hex filename 26104 2720 128 28952 7118 wmm.o After: text data bss dec hex filename 25758 2816 128 28702 701e wmm.o Signed-off-by:
-
Adam Borowski authored
I assume that a blank efuse comes with all ones, thus I did not bother recognizing other possible junk values. This matches 100% of dongles I've seen (a single Gembird 8192eu). Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
-
Colin Ian King authored
Don't populate const array ucode_ofdm_rates on the stack, instead make it static. Makes the object code smaller by 100 bytes: Before: text data bss dec hex filename 39482 564 0 40046 9c6e phy_cmn.o After text data bss dec hex filename 39326 620 0 39946 9c0a phy_cmn.o (gcc 6.3.0, x86-64) Signed-off-by:
-
Allen Pais authored
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Signed-off-by:
-
- Sep 20, 2017
-
-
Ganapathi Bhat authored
Avoid calculating random MAC address in driver. Instead make use of 'get_random_mask_addr()' function. Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Ganapathi Bhat authored
Application will keep track of whether MAC address randomization is enabled or not during scan. But at present driver is storing 'random_mac' in mwifiex_private which implies even after scan is done driver has some reference to the earlier 'scan request'. To avoid this, make use of 'mac_addr' variable in 'scan_request' to store 'random_mac'. This structure will be freed by cfg80211 once scan is done. Signed-off-by:
-
Colin Ian King authored
Don't populate const arrays on the stack, instead make them static Makes the object code smaller by nearly 300 bytes: Before: text data bss dec hex filename 69260 16149 576 85985 14fe1 cfg80211.o After: text data bss dec hex filename 68385 16725 576 85686 14eb6 cfg80211.o Signed-off-by:
-
Himanshu Jha authored
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Ganapathi Bhat authored
If driver is loaded with 'mfg_mode' enabled, then the sending commands are not allowed. So, skip sending commands, to firmware in mwifiex_add_virtual_intf if 'mfg_mode' is enabled. Fixes: 7311ea85 ("mwifiex: fix AP start problem for newly added interface") Signed-off-by:
-
Ganapathi Bhat authored
Driver sends a series of scan commands to firmware to serve a user scan request. If an intermediate scan command fails, driver aborts the scan but it is not being informed to cfg80211. This will cause issues in applications performing periodic scans. Fix this by informing scan abort. Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
-
Larry Finger authored
In routine rtl92ee_set_fw_rsvdpagepkt(), the driver allocates an skb, but never calls rtl_cmd_send_packet(), which will free the buffer. All other rtlwifi drivers perform this operation correctly. This problem has been in the driver since it was included in the kernel. Fortunately, each firmware load only leaks 4 buffers, which likely explains why it has not previously been detected. Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
A typo led to this issue, which was detected with the help of Coccinelle. In addition to fixing the error, the code is refactored to eliminate an if statement. Addresses-Coverity-ID: 1226788 Reported-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Colin Ian King authored
The u8 char array ret is not being initialized and elements outside the range start to end contain just garbage values from the stack. This results in a later scan of the array to read potentially uninitialized values. Fix this by initializing the array to zero. This seems to have been an issue since the very first commit. Detected by CoverityScan CID#139653 ("Uninitialized scalar variable") Signed-off-by:Michael Buesch <m@bues.ch> Signed-off-by:
-
Colin Ian King authored
The u8 char array ret is not being initialized and elements outside the range start to end contain just garbage values from the stack. This results in a later scan of the array to read potentially uninitialized values. Fix this by initializing the array to zero. This seems to have been an issue since the very first commit. Detected by CoverityScan CID#139652 ("Uninitialized scalar variable") Signed-off-by:
-
