- May 04, 2007
-
-
Michael Chan authored
Update version to 1.5.10. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Fix the code to print PCI or PCIE bus information for all devices. Signed-off-by:
-
Michael Chan authored
The 5709 supports the one-shot MSI handler similar to some of the tg3 chips. In this mode, the MSI disables itself automatically until it is re-enabled at the end of NAPI poll. Put the request_irq/free_irq logic in common procedures. Signed-off-by:
-
Michael Chan authored
Restructure by adding bnx2_phy_event_is_set() to make code cleaner and easier to understand. Signed-off-by:
-
Michael Chan authored
The indirect register access method will be used by more than one caller in BH context (NAPI poll and timer), so a spinlock is required. Signed-off-by:
-
Michael Chan authored
Add PCI ID and code to support the 5709 Serdes PHY. Signed-off-by:
-
Michael Chan authored
Add some common procedures to handle enabling and disabling 2.5G. Add some missing code to resolve flow control. Signed-off-by:
-
Michael Chan authored
The 5709 Serdes device uses non-standard MII register offsets. This re-structuring will make it easier to support 5709 Serdes. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
Add ipv6 TSO support in firmware. Signed-off-by:
-
Michael Chan authored
This fixes the problem of not counting all dropped multicast packets. Signed-off-by:
-
Michael Chan authored
This is needed to save the MSI state which will be lost during suspend. Signed-off-by:
-
Michael Chan authored
Hot-plug scripts can call bnx2_open() as soon as register_netdev() is called in bnx2_init_one(). We need to call pci_set_drvdata() and setup everything before calling register_netdev(). netif_carrier_off() also needs to be moved to bnx2_open() to avoid race conditions with the irq. Signed-off-by: -
Michael Chan authored
The internal PCIE-to-PCIX bridge of the 5708 has the same 40-bit DMA limitation as some of the tg3 chips. Set dma_mask and persistent DMA mask to 40-bit to workaround. Signed-off-by:
-
Michael Chan authored
Tweak registers and memory test range for 5709. Signed-off-by:
-
Michael Chan authored
The device may be in D3hot state and should not allow MII register access. Signed-off-by:
-
Michael Chan authored
Add 2.5G supported and advertising bit definitions. 2.5G is supported by the bnx2 driver. Signed-off-by:
-
- May 03, 2007
-
-
Patrick McHardy authored
Consolidate the common push/pull sequences into a few helper functions. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Herbert Xu authored
I needed to use this recently to talk to a Cisco server. In my case I only did SNAT while the Cisco server used a different address for RTP traffic than the one for SIP. I discovered that nf_nat_sip NATed the RTP address to the SIP one which was unnecessary but OK. However, in doing so it did not DNAT the destination address on the RTP traffic to the Cisco back to the original RTP address. This patch corrects this by noting down the RTP address and using it when the expectation fires. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jorge Boncompte authored
While porting some changes of the 2.6.21-rc7 pptp/proto_gre conntrack and nat modules to a 2.4.32 kernel I noticed that the gre_key function returns a wrong pointer to the GRE key of a version 0 packet thus corrupting the packet payload. The intended behaviour for GREv0 packets is to act like nf_conntrack_proto_generic/nf_nat_proto_unknown so I have ripped the offending functions (not used anymore) and modified the nf_nat_proto_gre modules to not touch version 0 (non PPTP) packets. Signed-off-by:
Jorge Boncompte <jorge@dti2.net> Signed-off-by:
-
Patrick McHardy authored
Also accept the --random option for DNAT to allow randomly selecting a destination port from the given range. Signed-off-by:
-
Ilpo Järvinen authored
TCP has a transitional state when SACK is not in use during which this invariant is temporarily broken. Without SACK, tcp_clean_rtx_queue does not decrement sacked_out. Therefore calls to tcp_sync_left_out before sacked_out is again corrected by tcp_fastretrans_alert can trigger this trap as sacked_out still has couple of segments that are already out of window. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
David Howells authored
Adjust the new netdevice scanning code provided by Patrick McHardy: (1) Restore the function banner comments that were dropped. (2) Rather than using an array size of 6 in some places and an array size of ETH_ALEN in others, pass a pointer instead and pass the array size through so that we can actually check it. (3) Do the buffer fill count check before checking the for_primary_ifa condition again. This permits us to skip that check should maxbufs be reached before we run out of interfaces. Signed-off-by:David Howells <dhowells@redhat.com> Signed-off-by:
-
Patrick McHardy authored
Replace the large and complicated rtnetlink client by two simple functions for getting the MAC address for the first ethernet device and building a list of IPv4 addresses. Signed-off-by:
-
Patrick McHardy authored
Add __dev_getfirstbyhwtype for callers that don't want a reference but some data from the device and thus need to take the rtnl anyway. Signed-off-by:
-
Patrick McHardy authored
The interface array is not freed on exit. Signed-off-by:
-
Patrick McHardy authored
When the user passes in MSG_TRUNC the skb is used after getting freed. Signed-off-by:
-
Herbert Xu authored
Since we can still receive packets until all references to the socket are gone, we don't need to kill the CB until that happens. This also aligns ourselves with the receive queue purging which happens at that point. Signed-off-by:
-
Randy Dunlap authored
Fix skbuff.h kernel-doc: linux-2.6.21-git4//include/linux/skbuff.h:316): No description found for parameter 'transport_header' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Robert P. J. Day authored
Delete the apparently unused header file net/ipv4/tcp_yeah.h. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
David Howells authored
Fix use of __exit functions from __init path. Signed-off-by:
-
David Howells authored
Make miscellaneous fixes to AFS and AF_RXRPC: (*) Make AF_RXRPC select KEYS rather than RXKAD or AFS_FS in Kconfig. (*) Don't use FS_BINARY_MOUNTDATA. (*) Remove a done 'TODO' item in a comemnt on afs_get_sb(). (*) Don't pass a void * as the page pointer argument of kmap_atomic() as this breaks on m68k. Patch from Geert Uytterhoeven <geert@linux-m68k.org>. (*) Use match_*() functions rather than doing my own parsing. Signed-off-by: -
David Howells authored
Make the match_*() functions take a const pointer to the options table and make strings pointers in the options table const too. Signed-off-by:
-
Eric Dumazet authored
__HAVE_ARCH_ADDR_SET seems unused these days, just get rid of it. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
- May 01, 2007
-
-
Linus Torvalds authored
The Marvell IDE interface on my machine would hit a BUG_ON() in lib/iomem.c because it was calling ata_pci_init_one() specifying just a single port on the host, but that would actually end up trying to initialize two ports, the second one with bogus information. This fixes "ata_pci_init_one()" so that it actually passes down the n_ports variable that it got from the low-level driver to the host allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA layer actually having the correct port number information. And in order to make it all work, I also needed to fix a few places that had incorrectly hard-coded the fact that a host always had exactly two ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would just always iterate over both ports). Acked-by:Jeff Garzik <jeff@garzik.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
For backwards compatibility, call_platform_enable_wakeup() can return 0 instead of -EIO since we aren't guaranteed to have errno defined. Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
David Rientjes <rientjes@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jeremy Fitzhardinge authored
Add a kvasprintf() function to complement kasprintf(). No in-tree users yet, but I have some coming up. [akpm@linux-foundation.org: EXPORT it] Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Keir Fraser <keir@xensource.com> Signed-off-by:
-
Johannes Berg authored
This patch changes the docs and behaviour from "all states valid" to "no states valid" if no .valid callback is assigned. Users of pm_ops that only need mem sleep can assign pm_valid_only_mem without any overhead, others will require more elaborate callbacks. Now that all users of pm_ops have a .valid callback this is a safe thing to do and prevents things from getting messy again as they were before. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Pavel Machek <pavel@ucw.cz> Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl> Cc: <linux-pm@lists.linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Johannes Berg authored
Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Johannes Berg authored
This patch removes the firmware disk suspend mode which is the wrong approach, it is supposed to be used for implementing firmware-based disk suspend but cannot actually be used for that. Signed-off-by:
-
