- Oct 25, 2013
-
-
Anssi Hannula authored
ATI/AMD HDMI codecs do not include standard HDA HDMI HBR support (which is required for bitstreaming DTS-HD and Dolby TrueHD), instead they have custom verbs for checking and enabling it. Add support for the ATI/AMD HDMI HBR verbs. The specification is available at: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf v2: adapted to hdmi_ops infrastructure Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Peter Frühberger <fritsch@xbmc.org> # v1 Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Anssi Hannula authored
ATI/AMD HDMI/DP codecs do not include standard HDA ELD (EDID-like data) support. In place of providing access to an ELD buffer, various vendor-specific verbs are provided to provide the relevant information. Revision ID 3 and later (0x100300 as reported by procfs codec#X) have support for providing more information than the previous revisions (but only if supported by the display driver). Generate ELD from the information provided by the vendor-specific verbs on ATI/AMD codecs. The specification is available at: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf v2: moved code to hda_eld.c and cleaned it up v3: adapted to hdmi_ops infrastructure Signed-off-by:
-
Anssi Hannula authored
ATI/AMD codecs do not support all the standard HDA HDMI/DP functions, instead various vendor-specific verbs are provided. This commit addresses these missing functions: - standard channel mapping support - standard infoframe configuration support ATI/AMD provides their own verbs that allow the following: - setting CA for infoframe - setting down-mix information for infoframe - channel pair remapping - individual channel remapping (revision ID 3+, 0x100300+) The documentation for the verbs has now been released by AMD: http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf Add support for the ATI/AMD specific verbs and use them instead of the generic methods on ATI/AMD codecs. This allows multi-channel PCM audio to work. Channel remapping is restricted to pairwise mapping on codecs with revision ID 2 (0x100200 as reported by procfs codec#X) or lower. This means cards up to Radeon HD7670 as far as I know. This will not affect standard multi-channel modes since these codecs support automatic FC-LFE swapping for HDMI. ATI/AMD codecs do not advertise all of their supported rates, formats and channel counts, therefore that information is forced accordingly so that all HDMI 1.x PCM parameters are marked as supported. Support for multiple ports is also added to patch_atihdmi so that 0x1002aa01 codecs with multiple ports will work properly when switched back to that patch. v2: splitted ELD emulation to a separate patch, tlv fixes v3: adapted to the new hdmi_ops infrastructure, fixed rev3+ vendor id Signed-off-by:
-
Anssi Hannula authored
Upcoming AMD multichannel support requires many customized operations (channel mapping, ELD, HBR) but can otherwise share most of its code with the generic patch. Add a local struct hdmi_ops containing customizable HDMI-specific callbacks and move the current code to those callbacks. Functionality is unaltered. Signed-off-by:
-
- Oct 24, 2013
-
-
Kailang Yang authored
Some machine with 85ms delay might be happen pop noise when codec enter to D3. Raise up to 100ms delay will be match for more machine. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Vinod Koul authored
The drain and drain_notify callback were blocked by low level driver untill the draining was complete. Due to this being invoked with big fat mutex held, others ops like reading timestamp, calling pause, drop were blocked. So to fix this we add a new snd_compr_drain_notify() API. This would be required to be invoked by low level driver when drain or partial drain has been completed by the DSP. Thus we make the drain and partial_drain callback as non blocking and driver returns immediately after notifying DSP. The waiting is done while relasing the lock so that other ops can go ahead. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> CC: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
It turned out that we can't use gen_pool_*() functions on archs without CONFIG_GENERIC_ALLOCATOR (resulting in missing symbols), since linux/genalloc.h doesn't provide dummy functions for all. We'd be able to fix linux/genalloc.h size, but I take an easier path for now... Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Takashi Iwai authored
When HP laptops with mute and mic-record LEDs go to runtime suspend, these LEDs are turned on forcibly no matter whether GPIO pis are on or off. This strange behavior seems triggered by resetting the HD-audio bus link at azx_rutime_suspend(). So, just add a new hda_bus flag to avoid the link reset at runtime suspend and set it for these HP machines. Signed-off-by: -
Kailang Yang authored
Yet another variants of ALC269. Signed-off-by:
-
Kailang Yang authored
It's just another variant of ALC269 & co. Signed-off-by:
-
Joe Perches authored
Emitting an OOM message isn't necessary after input_allocate_device as there's a generic OOM and a dump_stack already done. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Nicolin Chen authored
Now it's quite common that an SoC contains its on-chip internal RAM. By using this RAM space for DMA buffer during audio playback/record, we can shutdown the voltage for external RAM to save power. So add new DEV type with iram malloc()/free() and accordingly modify current default mmap() for the iram circumstance. Signed-off-by:
Nicolin Chen <b42378@freescale.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
- Oct 22, 2013
-
-
- Oct 21, 2013
-
-
Takashi Iwai authored
... which was introduced by the previous commit a4e9a38b , causing build errors without CONFIG_PROC_FS. Reported-by:
-
Mengdong Lin authored
This patch adds codec ID (0x80862882) and module alias for Valleyview2 display codec. Signed-off-by:
Mengdong Lin <mengdong.lin@intel.com> Signed-off-by:
-
Clemens Ladisch authored
At the moment, this driver supports only playback, while FFADO supports (only) full-duplex devices. So, prevent conflicts by not claiming devices that would be better handled by FFADO. Signed-off-by:Clemens Ladisch <clemens@ladisch.de>
-
Clemens Ladisch authored
While most DICE devices keep TCAT's default category ID of 0x04, Weiss devices identify themselves with 0x00. Reported-by:
Rolf Anderegg <rolf.anderegg@weiss.ch> Signed-off-by:
-
Clemens Ladisch authored
Remove a wrong typecast that resulted from a copy-and-paste error. Signed-off-by: -
Clemens Ladisch authored
Doing accesses without quadlet alignment is a bad idea because the firmware's byte-swapping would garble the data; clarify this in the documentation. Signed-off-by: -
Clemens Ladisch authored
For easier debugging, add a proc file to show the device's capabilities and current status. Signed-off-by: -
Clemens Ladisch authored
Output a warning if the wait for the clock change notification times out. Signed-off-by: -
Clemens Ladisch authored
Instead of relying of some control panel application to configure some fixed sample rate, allow applications to set it automatically. Signed-off-by: -
Clemens Ladisch authored
In preparation for sample rate selection support, read the stream parameters that might change when running at different sample rates. Signed-off-by: -
Clemens Ladisch authored
Reorganize the initialization order so that the driver can receive notifications earlier. Signed-off-by: -
Clemens Ladisch authored
In preparation for sample rate selection support, ensure that the driver knows about the device's clock capabilities. Signed-off-by: -
Clemens Ladisch authored
Signed-off-by: -
Stefan Richter authored
Avoid a lock inversion between dice->mutex and pcm->open_mutex. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Clemens Ladisch authored
The pcm field was not actually used. Signed-off-by: -
Clemens Ladisch authored
Since commit f2b3614c (Don't check DMA time-out too shortly), we need no longer to restrict the period length to less than 10 s. Signed-off-by:
-
Clemens Ladisch authored
When a bus reset happens, the enable register is automatically cleared, so we do not need to clear it manually when stopping the stream. Signed-off-by: -
Clemens Ladisch authored
Add a flag to snd_fw_transaction() to allow it to abort when a bus reset happens. This removes most of the duplicated error handling loops that were required around calls to the low-level fw_run_transaction(). Also add a flag to suppress error messages; errors are expected when we attempt to clean up after the device was unplugged. Signed-off-by: -
Clemens Ladisch authored
Instead of reading two consecutive register with two quadlet requests, use one block read request. Signed-off-by: -
Clemens Ladisch authored
Change the AMDTP streaming code to handle the non-standard stream format that DICE devices use at sample rates greater than 96 kHz. Signed-off-by: -
Clemens Ladisch authored
DICE devices do not have a unique specifier ID in their unit directory (it's always the same as the device vendor's ID), so rely on just the version ID for driver loading, and use a heuristic in the probe callback to detect actual DICE devices. Signed-off-by: -
Clemens Ladisch authored
Move the DICE interface symbols into a separate header file, and add more documentation. Signed-off-by: -
Clemens Ladisch authored
Introduce the helper function amdtp_out_stream_running(). This makes many checks in amdtp.c clearer and frees the device drivers from having to track this with a separate variable. Signed-off-by: -
Clemens Ladisch authored
Ensure that misbehaving or aborted userspace programs do not accidentally keep the lock. Signed-off-by: -
Clemens Ladisch authored
Implement the hwdep locking and notification mechanisms. Signed-off-by: -
Clemens Ladisch authored
When aborting a PCM stream, the xrun is signaled only if the stream is running. When disconnecting a PCM stream, calling snd_card_disconnect() too early would change the stream into a non-running state and thus prevent the xrun from being noticed by user space. To prevent this, move the snd_card_disconnect() call after the xrun. Signed-off-by: -
Clemens Ladisch authored
Allow AMDTP output streams to use blocking mode. Use it for DICE devices, because the old DICE-II chip will in some cases not be able to lock to non-blocking streams (erratum E7). Signed-off-by:
-
