CPU notifier register functions also exist if CONFIG_SMP is
disabled. This change is part of hotplug code rework and also
necessary for later patches.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>

This fixes a NULL pointer dereference that is triggered when taking a
cpu offline after oprofile was initialized, e.g.:

 $ opcontrol --init
 $ opcontrol --start-daemon
 $ opcontrol --shutdown
 $ opcontrol --deinit
 $ echo 0 > /sys/devices/system/cpu/cpu1/online

See the crash dump below. Though the counter has been disabled the cpu
notifier is still active and trying to use already freed counter data.

This fix is for linux-stable. To proper fix this, the hotplug code
must be rewritten. Thus I will leave a WARN_ON_ONCE() message with
this patch.

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/online
CPU 1
Modules linked in:

Pid: 0, comm: swapper Not tainted 2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16 Anaheim/Anaheim
RIP: 0010:[<ffffffff8132ad57>]  [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e
RSP: 0018:ffff880001843f28  EFLAGS: 00010006
RAX: 0000000000000000 RBX: 0000000000000000 RCX: dead000000200200
RDX: ffff880001843f68 RSI: dead000000100100 RDI: 0000000000000000
RBP: ffff880001843f48 R08: 0000000000000000 R09: ffff880001843f08
R10: ffffffff8102c9a5 R11: ffff88000184ea80 R12: 0000000000000000
R13: ffff88000184f6c0 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fec6a92e6f0(0000) GS:ffff880001840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000000163b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff88042fcd8000, task ffff88042fcd51d0)
Stack:
 ffff880001843f48 0000000000000001 ffff88042e9f7d38 ffff880001843f68
<0> ffff880001843f58 ffffffff8132a602 ffff880001843f98 ffffffff810521b3
<0> ffff880001843f68 ffff880001843f68 ffff880001843f88 ffff88042fcd9fd8
Call Trace:
 <IRQ>
 [<ffffffff8132a602>] nmi_cpu_stop+0x21/0x23
 [<ffffffff810521b3>] generic_smp_call_function_single_interrupt+0xdf/0x11b
 [<ffffffff8101804f>] smp_call_function_single_interrupt+0x22/0x31
 [<ffffffff810029f3>] call_function_single_interrupt+0x13/0x20
 <EOI>
 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff81008701>] ? default_idle+0x22/0x37
 [<ffffffff8100896d>] c1e_idle+0xdf/0xe6
 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810012fb>] cpu_idle+0x4b/0x7e
 [<ffffffff813e8a4e>] start_secondary+0x1ae/0x1b2
Code: 89 e5 41 55 49 89 fd 41 54 45 31 e4 53 31 db 48 83 ec 08 89 df e8 be f8 ff ff 48 98 48 83 3c c5 10 67 7a 81 00 74 1f 49 8b 45 08 <42> 8b 0c 20 0f 32 48 c1 e2 20 25 ff ff bf ff 48 09 d0 48 89 c2
RIP  [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e
 RSP <ffff880001843f28>
CR2: 0000000000000000
---[ end trace 679ac372d674b757 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G      D    2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16
Call Trace:
 <IRQ>  [<ffffffff813ebd6a>] panic+0x9e/0x10c
 [<ffffffff810474b0>] ? up+0x34/0x39
 [<ffffffff81031ccc>] ? kmsg_dump+0x112/0x12c
 [<ffffffff813eeff1>] oops_end+0x81/0x8e
 [<ffffffff8101efee>] no_context+0x1f3/0x202
 [<ffffffff8101f1b7>] __bad_area_nosemaphore+0x1ba/0x1e0
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff810264dc>] ? activate_task+0x42/0x53
 [<ffffffff8102c967>] ? try_to_wake_up+0x272/0x284
 [<ffffffff8101f1eb>] bad_area_nosemaphore+0xe/0x10
 [<ffffffff813f0f3f>] do_page_fault+0x1c8/0x37c
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff813ee55f>] page_fault+0x1f/0x30
 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff8132ad57>] ? op_amd_stop+0x2d/0x8e
 [<ffffffff8132ad46>] ? op_amd_stop+0x1c/0x8e
 [<ffffffff8132a602>] nmi_cpu_stop+0x21/0x23
 [<ffffffff810521b3>] generic_smp_call_function_single_interrupt+0xdf/0x11b
 [<ffffffff8101804f>] smp_call_function_single_interrupt+0x22/0x31
 [<ffffffff810029f3>] call_function_single_interrupt+0x13/0x20
 <EOI>  [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff81008701>] ? default_idle+0x22/0x37
 [<ffffffff8100896d>] c1e_idle+0xdf/0xe6
 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810012fb>] cpu_idle+0x4b/0x7e
 [<ffffffff813e8a4e>] start_secondary+0x1ae/0x1b2
------------[ cut here ]------------
WARNING: at /local/rrichter/.source/linux/arch/x86/kernel/smp.c:118 native_smp_send_reschedule+0x27/0x53()
Hardware name: Anaheim
Modules linked in:
Pid: 0, comm: swapper Tainted: G      D    2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16
Call Trace:
 <IRQ>  [<ffffffff81017f32>] ? native_smp_send_reschedule+0x27/0x53
 [<ffffffff81030ee2>] warn_slowpath_common+0x77/0xa4
 [<ffffffff81030f1e>] warn_slowpath_null+0xf/0x11
 [<ffffffff81017f32>] native_smp_send_reschedule+0x27/0x53
 [<ffffffff8102634b>] resched_task+0x60/0x62
 [<ffffffff8102653a>] check_preempt_curr_idle+0x10/0x12
 [<ffffffff8102c8ea>] try_to_wake_up+0x1f5/0x284
 [<ffffffff8102c986>] default_wake_function+0xd/0xf
 [<ffffffff810a110d>] pollwake+0x57/0x5a
 [<ffffffff8102c979>] ? default_wake_function+0x0/0xf
 [<ffffffff81026be5>] __wake_up_common+0x46/0x75
 [<ffffffff81026ed0>] __wake_up+0x38/0x50
 [<ffffffff81031694>] printk_tick+0x39/0x3b
 [<ffffffff8103ac37>] update_process_times+0x3f/0x5c
 [<ffffffff8104dc63>] tick_periodic+0x5d/0x69
 [<ffffffff8104dc90>] tick_handle_periodic+0x21/0x71
 [<ffffffff81018fd0>] smp_apic_timer_interrupt+0x82/0x95
 [<ffffffff81002853>] apic_timer_interrupt+0x13/0x20
 [<ffffffff81030cb5>] ? panic_blink_one_second+0x0/0x7b
 [<ffffffff813ebdd6>] ? panic+0x10a/0x10c
 [<ffffffff810474b0>] ? up+0x34/0x39
 [<ffffffff81031ccc>] ? kmsg_dump+0x112/0x12c
 [<ffffffff813eeff1>] ? oops_end+0x81/0x8e
 [<ffffffff8101efee>] ? no_context+0x1f3/0x202
 [<ffffffff8101f1b7>] ? __bad_area_nosemaphore+0x1ba/0x1e0
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff810264dc>] ? activate_task+0x42/0x53
 [<ffffffff8102c967>] ? try_to_wake_up+0x272/0x284
 [<ffffffff8101f1eb>] ? bad_area_nosemaphore+0xe/0x10
 [<ffffffff813f0f3f>] ? do_page_fault+0x1c8/0x37c
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff813ee55f>] ? page_fault+0x1f/0x30
 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff8132ad57>] ? op_amd_stop+0x2d/0x8e
 [<ffffffff8132ad46>] ? op_amd_stop+0x1c/0x8e
 [<ffffffff8132a602>] ? nmi_cpu_stop+0x21/0x23
 [<ffffffff810521b3>] ? generic_smp_call_function_single_interrupt+0xdf/0x11b
 [<ffffffff8101804f>] ? smp_call_function_single_interrupt+0x22/0x31
 [<ffffffff810029f3>] ? call_function_single_interrupt+0x13/0x20
 <EOI>  [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff81008701>] ? default_idle+0x22/0x37
 [<ffffffff8100896d>] ? c1e_idle+0xdf/0xe6
 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810012fb>] ? cpu_idle+0x4b/0x7e
 [<ffffffff813e8a4e>] ? start_secondary+0x1ae/0x1b2
---[ end trace 679ac372d674b758 ]---

Cc: Andi Kleen <andi@firstfloor.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>

The check is already done in ibs_exit().

Signed-off-by: Robert Richter <robert.richter@amd.com>

Moving code to make future changes easier. This groups all IBS code
together.

Signed-off-by: Robert Richter <robert.richter@amd.com>

In case a counter is already reserved by the watchdog or perf_event
subsystem, oprofile ignored this counters silently. This case is
handled now and oprofile_setup() now reports an error.

Signed-off-by: Robert Richter <robert.richter@amd.com>

Moving some code in preparation of the next patch.

Signed-off-by: Robert Richter <robert.richter@amd.com>

For AMD's and Intel's P6 generic performance counters have pairwise
counter and control msrs. This patch changes the counter reservation
in a way that both msrs must be registered. It joins some counter
loops and also removes the unnecessary NUM_CONTROLS macro in the AMD
implementation.

Signed-off-by: Robert Richter <robert.richter@amd.com>

This patch improves the error handler in nmi_setup(). Most parts of
the code are moved to allocate_msrs(). In case of an error
allocate_msrs() also frees already allocated memory. nmi_setup()
becomes easier and better extendable.

Signed-off-by: Robert Richter <robert.richter@amd.com>

File list now catches:

 $ xargs | eval ls -d $(cat) | sort -u
 arch/*/include/asm/oprofile*.h
 arch/*/oprofile/
 drivers/oprofile/
 include/linux/oprofile.h

 arch/alpha/oprofile/
 arch/arm/oprofile/
 arch/avr32/oprofile/
 arch/blackfin/oprofile/
 arch/ia64/oprofile/
 arch/m32r/oprofile/
 arch/microblaze/oprofile/
 arch/mips/oprofile/
 arch/mn10300/oprofile/
 arch/parisc/oprofile/
 arch/powerpc/include/asm/oprofile_impl.h
 arch/powerpc/oprofile/
 arch/s390/oprofile/
 arch/sh/oprofile/
 arch/sparc/oprofile/
 arch/x86/oprofile/
 drivers/oprofile/
 include/linux/oprofile.h

Signed-off-by: Robert Richter <robert.richter@amd.com>

http://lkml.org/lkml/2010/4/27/285



Protect against dereferencing regs when it's NULL, and
force a magic number into pc to prevent too deep processing.
This approach permits the dropped samples to be tallied as
invalid Instruction Pointer events.

e.g. output from about 15mins at 10kHz sample rate:
Nr. samples received: 2565380
Nr. samples lost invalid pc: 4

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

Conflicts:
	drivers/oprofile/cpu_buffer.c

Signed-off-by: Robert Richter <robert.richter@amd.com>

oprofile used a double buffer scheme for its cpu event buffer
to avoid races on reading with the old locked ring buffer.

But that is obsolete now with the new ring buffer, so simply
use a single buffer. This greatly simplifies the code and avoids
a lot of sample drops on large runs, especially with call graph.

Based on suggestions from Steven Rostedt

For stable kernels from v2.6.32, but not earlier.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>

The recent anon_vma fixes cause many anonymous pages to end up
in the parent process anon_vma, even when the page is exclusively
owned by the current process.

Adding exclusively owned anonymous pages to the top anon_vma
reduces rmap scanning overhead, especially in workloads with
forking servers.

This patch adds a parameter to __page_set_anon_rmap that can
be used to indicate whether or not the added page is exclusively
owned by the current process.

Pages added through page_add_new_anon_rmap are exclusively
owned by the current process, and can be added to the top
anon_vma.

Pages added through page_add_anon_rmap can be either shared
or exclusively owned, so we do the conservative thing and
add it to the oldest anon_vma.

A next step would be to add the exclusive parameter to
page_add_anon_rmap, to be used from functions where we do
know for sure whether a page is exclusively owned.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Joha...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Turn lower lookup error messages into debug messages
  eCryptfs: Copy lower directory inode times and size on link
  ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inode
  ecryptfs: fix error code for missing xattrs in lower fs
  eCryptfs: Decrypt symlink target for stat size
  eCryptfs: Strip metadata in xattr flag in encrypted view
  eCryptfs: Clear buffer before reading in metadata xattr
  eCryptfs: Rename ecryptfs_crypt_stat.num_header_bytes_at_front
  eCryptfs: Fix metadata in xattr feature regression

Vaugue warnings about ENAMETOOLONG errors when looking up an encrypted
file name have caused many users to become concerned about their data.
Since this is a rather harmless condition, I'm moving this warning to
only be printed when the ecryptfs_verbosity module param is 1.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

The timestamps and size of a lower inode involved in a link() call was
being copied to the upper parent inode.  Instead, we should be
copying lower parent inode's timestamps and size to the upper parent
inode.  I discovered this bug using the POSIX test suite at Tuxera.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Since tmpfs has no persistent storage, it pins all its dentries in memory
so they have d_count=1 when other file systems would have d_count=0.
->lookup is only used to create new dentries. If the caller doesn't
instantiate it, it's freed immediately at dput(). ->readdir reads
directly from the dcache and depends on the dentries being hashed.

When an ecryptfs mount is mounted, it associates the lower file and dentry
with the ecryptfs files as they're accessed. When it's umounted and
destroys all the in-memory ecryptfs inodes, it fput's the lower_files and
d_drop's the lower_dentries. Commit 4981e081 added this and a d_delete in
2008 and several months later commit caeeeecf removed the d_delete. I
believe the d_drop() needs to be removed as well.

The d_drop effectively hides any file that has been accessed via ecryptfs
from the underlying tmpfs since it depends on it being hashed for it to
be accessible. I've removed the d_drop on my development node and see no
ill effects with basic testing on both tmpfs and persistent storage.

As a side effect, after ecryptfs d_drops the dentries on tmpfs, tmpfs
BUGs on umount. This is due to the dentries being unhashed.
tmpfs->kill_sb is kill_litter_super which calls d_genocide to drop
the reference pinning the dentry. It skips unhashed and negative dentries,
but shrink_dcache_for_umount_subtree doesn't. Since those dentries
still have an elevated d_count, we get a BUG().

This patch removes the d_drop call and fixes both issues.

This issue was reported at:
https://bugzilla.novell.com/show_bug.cgi?id=567887



Reported-by: Árpád Bíró <biroa@demasz.hu>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

If the lower file system driver has extended attributes disabled,
ecryptfs' own access functions return -ENOSYS instead of -EOPNOTSUPP.
This breaks execution of programs in the ecryptfs mount, since the
kernel expects the latter error when checking for security
capabilities in xattrs.

Signed-off-by: Christian Pulvermacher <pulvermacher@gmx.de>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Create a getattr handler for eCryptfs symlinks that is capable of
reading the lower target and decrypting its path.  Prior to this patch,
a stat's st_size field would represent the strlen of the encrypted path,
while readlink() would return the strlen of the decrypted path.  This
could lead to confusion in some userspace applications, since the two
values should be equal.

https://bugs.launchpad.net/bugs/524919



Reported-by: Loïc Minier <loic.minier@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Commit b91ecb00

 ("gigaset: include cleanup cleanup") removed an implicit
sched.h inclusion that came in via slab.h, and caused various compile
problems as a result.

This should fix it.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Make RCU lockdep check the lockdep_recursion variable
  rcu: Update docs for rcu_access_pointer and rcu_dereference_protected
  rcu: Better explain the condition parameter of rcu_dereference_check()
  rcu: Add rcu_access_pointer and rcu_dereference_protected

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  gigaset: include cleanup cleanup
  packet : remove init_net restriction
  WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver.
  ip: Fix ip_dev_loopback_xmit()
  net: dev_pick_tx() fix
  fib: suppress lockdep-RCU false positive in FIB trie.
  tun: orphan an skb on tx
  forcedeth: fix tx limit2 flag check
  iwlwifi: work around bogus active chains detection

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add FireMV 2400 PCI ID.
  drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET
  drivers/gpu/radeon: Add MSPOS regs to safe list.
  drm/radeon/kms: disable the tv encoder when tv/cv is not in use
  drm/radeon/kms: adjust pll settings for tv
  drm/radeon/kms: fix tv dac conflict resolver
  drm/radeon/kms/evergreen: don't enable hdmi audio stuff
  drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0
  drm/radeon/kms: fix rs600 tlb flush
  drm/radeon/kms: print GPU family and device id when loading
  drm/radeon/kms: fix calculation of mipmapped 3D texture sizes
  drm/radeon/kms: only change mode when coherent value changes.
  drm/radeon/kms: more atom parser fixes (v2)

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.
  ARM: 6052/1: kdump: make kexec work in interrupt context
  ARM: 6051/1: VFP: preserve the HW context when calling signal handlers
  ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstate
  ARM: 6007/1: fix highmem with VIPT cache and DMA
  ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs off

This is an M24/X600 chip.

From RH# 581927

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The lockdep facility temporarily disables lockdep checking by
incrementing the current->lockdep_recursion variable.  Such
disabling happens in NMIs and in other situations where lockdep
might expect to recurse on itself.

This patch therefore checks current->lockdep_recursion, disabling RCU
lockdep splats when this variable is non-zero.  In addition, this patch
removes the "likely()", as suggested by Lai Jiangshan.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: David Miller <davem@davemloft.net>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: eric.dumazet@gmail.com
LKML-Reference: <20100415195039.GA22623@linux.vne...

[airlied: fix V_A_N_V to not be safe and fix check to make sure only r500
 - bump userspace version]

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Permits MSAA and D3D-style rasterization.

[airlied: add rs600]

Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Switching between TV and VGA caused VGA to break on some systems
since the TV encoder was left enabled when VGA was used.

fixes fdo bug 25520.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

May fix fdo bug 26582.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

On systems with the tv dac shared between DVI and TV,
we can only use the dac for one of the connectors.
However, when using a digital monitor on the DVI port,
you can use the dac for the TV connector just fine.
Check the use_digital status when resolving the conflict.

Fixes fdo bug 27649, possibly others.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Got broken during the evergreen merge.
Fixes fdo bug 27001.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Typo in in flush leaded to no flush of the RS600 tlb which
ultimately leaded to massive system ram corruption, with
this patch everythings seems to work properly.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This will help figuring out GPU when looking at bugs log.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Commit 5a0e3ad6

 causes slab.h to be included twice in many of the
Gigaset driver's source files, first via the common include file
gigaset.h and then a second time directly. Drop the spares, and
use the opportunity to clean up a few more similar cases.

Impact: cleanup, no functional change
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
CC: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Ignore LVDS EDID when it is unavailabe or invalid
  drm/i915: Add no_lvds entry for the Clientron U800
  drm/i915: Rename many remaining uses of "output" to encoder or connector.
  drm/i915: Rename intel_output to intel_encoder.
  agp/intel: intel_845_driver is an agp driver!
  drm/i915: introduce to_intel_bo helper
  drm/i915: Disable FBC on 915GM and 945GM.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: EC: Limit burst to 64 bits