Commit deebb9ba authored by David Jander's avatar David Jander Committed by Shawn Guo
Browse files

ARM: dts: imx6dl-victgo.dts: update gpio names 



Following changes was made:
- Add MDIO signal names
- Add missing ISB_IN2 name. Also correct ISB_nIN1. These two signals were used
  together in older HW revisions. Later ISB_IN2 was removed. Software should
  still be able to use both.
- Add missing CAN1 and UART line names
- Add missing ON1/2_CTRL line names
- fix CPU_* line names. The real signal names are without the CPU_ prefix, like
  on imx6qdl-vicut1.dtsi
- Fix ETH_INT signal name

Signed-off-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 4eef8cb7

arch/arm/boot/dts/imx6dl-victgo.dts

+31 −10
Original line number Diff line number Diff line
@@ -408,8 +408,8 @@ &gpio1 { 
			"CAM2_MIRROR", "", "", "SMBALERT",

		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",

		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",

			"SD1_DATA3", "", "",

		"", "", "", "", "", "", "", "";

			"SD1_DATA3", "ETH_MDIO", "",

		"", "", "", "", "", "", "", "ETH_MDC";

};



&gpio2 {
@@ -417,7 +417,7 @@ &gpio2 { 
		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",

		"", "LED_PWM", "", "", "",

			"", "", "",

		"", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",

		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",

		"POWER_LED", "", "", "", "", "", "", "";

};
@@ -426,18 +426,20 @@ &gpio3 { 
		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",

			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",

			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",

		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",

			"YACO_RESET";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",

		"", "", "DIP1_FB", "", "VCAM_EN", "", "", "",

		"CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",

			"BL_PWM", "ETH_INTRP", "ISB_LED";

		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",

		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",

			"CAN2_SR", "CAN2_TX", "CAN2_RX",

		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",

			"HITCH_IN_OUT",

		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",

			"BL_PWM", "ETH_INT", "ISB_LED";

};



&gpio5 {
@@ -445,11 +447,30 @@ &gpio5 { 
		"", "", "", "", "", "", "", "",

		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",

			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",

			"I2S_BITCLK", "I2S_DOUT",

		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",

			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";

};



&gpio6 {

	gpio-line-names =

		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",

			"ITU656_D6", "ITU656_D7", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "";

};



&gpio7 {

	gpio-line-names =

		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",

			"EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",

		"EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",

		"", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",

		"", "", "", "", "", "", "", "";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default";