Commit 1288cfe0 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by Guenter Roeck
Browse files

docs: hwmon: asc7621: convert to ReST format 



Convert asc7621 to ReST format, in order to allow it to
be parsed by Sphinx.

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent a4710b72

Documentation/hwmon/asc7621

+88 −58
Original line number Diff line number Diff line 
=====================

Kernel driver asc7621

==================

=====================



Supported chips:



    Andigilog aSC7621 and aSC7621a



    Prefix: 'asc7621'



    Addresses scanned: I2C 0x2c, 0x2d, 0x2e



    Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf



Author:
@@ -73,8 +78,10 @@ Finally, we have added a tach disable function that turns off the tach 
measurement system for individual tachs in order to save power. That is

in register 75h.



--

--------------------------------------------------------------------------



aSC7621 Product Description

===========================



The aSC7621 has a two wire digital interface compatible with SMBus 2.0.

Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
@@ -102,6 +109,8 @@ System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are 
monitored efficiently with internal scaling resistors.



Features

--------



- Supports PECI interface and monitors internal and remote thermal diodes

- 2-wire, SMBus 2.0 compliant, serial interface

- 10-bit ADC
@@ -123,6 +132,7 @@ Except where noted below, the sysfs entries created by this driver follow 
the standards defined in "sysfs-interface".



temp1_source

	=	===============================================

	0 	(default) peci_legacy = 0, Remote 1 Temperature

		peci_legacy = 1, PECI Processor Temperature 0

	1 	Remote 1 Temperature
@@ -132,8 +142,10 @@ temp1_source 
	5 	PECI Processor Temperature 1

	6 	PECI Processor Temperature 2

	7	PECI Processor Temperature 3

	=	===============================================



temp2_source

	=	===============================================

	0 	(default) Internal Temperature

	1 	Remote 1 Temperature

	2 	Remote 2 Temperature
@@ -142,8 +154,10 @@ temp2_source 
	5 	PECI Processor Temperature 1

	6 	PECI Processor Temperature 2

	7 	PECI Processor Temperature 3

	=	===============================================



temp3_source

	=	===============================================

	0 	(default) Remote 2 Temperature

	1 	Remote 1 Temperature

	2 	Remote 2 Temperature
@@ -152,8 +166,10 @@ temp3_source 
	5 	PECI Processor Temperature 1

	6 	PECI Processor Temperature 2

	7 	PECI Processor Temperature 3

	=	===============================================



temp4_source

	=	===============================================

	0 	(default) peci_legacy = 0, PECI Processor Temperature 0

		peci_legacy = 1, Remote 1 Temperature

	1 	Remote 1 Temperature
@@ -163,58 +179,65 @@ temp4_source 
	5 	PECI Processor Temperature 1

	6 	PECI Processor Temperature 2

	7 	PECI Processor Temperature 3

	=	===============================================



temp[1-4]_smoothing_enable

temp[1-4]_smoothing_time

temp[1-4]_smoothing_enable / temp[1-4]_smoothing_time

	Smooths spikes in temp readings caused by noise.

	Valid values in milliseconds are:

	35000

	17600

	11800

	 7000

	 4400

	 3000

	 1600

	  800



	* 35000

	* 17600

	* 11800

	*  7000

	*  4400

	*  3000

	*  1600

	*   800



temp[1-4]_crit

	When the corresponding zone temperature reaches this value,

	ALL pwm outputs will got to 100%.



temp[5-8]_input

temp[5-8]_enable

temp[5-8]_input / temp[5-8]_enable

	The aSC7621 can also read temperatures provided by the processor

	via the PECI bus.  Usually these are "core" temps and are relative

	to the point where the automatic thermal control circuit starts

	throttling.  This means that these are usually negative numbers.



pwm[1-3]_enable

	=============== ========================================================

	0		Fan off.

	1		Fan on manual control.

	2		Fan on automatic control and will run at the minimum pwm

			if the temperature for the zone is below the minimum.

	3		Fan on automatic control but will be off if the temperature

				for the zone is below the minimum.

	3		Fan on automatic control but will be off if the

			temperature for the zone is below the minimum.

	4-254		Ignored.

	255		Fan on full.

	=============== ========================================================



pwm[1-3]_auto_channels

	Bitmap as described in sysctl-interface with the following

	exceptions...



	Only the following combination of zones (and their corresponding masks)

	are valid:

	1

	2

	3

	2,3

	1,2,3

	4

	1,2,3,4



	Special values:



	* 1

	* 2

	* 3

	* 2,3

	* 1,2,3

	* 4

	* 1,2,3,4



	* Special values:



	  ==		======================

	  0		Disabled.

	  16		Fan on manual control.

	  31		Fan on full.

	  ==		======================





pwm[1-3]_invert
@@ -226,22 +249,22 @@ pwm[1-3]_freq 
	PWM frequency in Hz

	Valid values in Hz are:



	10

	15

	23

	30  (default)

	38

	47

	62

	94

	23000

	24000

	25000

	26000

	27000

	28000

	29000

	30000

	* 10

	* 15

	* 23

	* 30  (default)

	* 38

	* 47

	* 62

	* 94

	* 23000

	* 24000

	* 25000

	* 26000

	* 27000

	* 28000

	* 29000

	* 30000



	Setting any other value will be ignored.
@@ -251,17 +274,17 @@ peci_enable 
peci_avg

	Input filter average time.



	0 	0 Sec. (no Smoothing) (default)

	1 	0.25 Sec.

	2 	0.5 Sec.

	3 	1.0 Sec.

	4 	2.0 Sec.

	5 	4.0 Sec.

	6 	8.0 Sec.

	7 	0.0 Sec.

	* 0 	0 Sec. (no Smoothing) (default)

	* 1 	0.25 Sec.

	* 2 	0.5 Sec.

	* 3 	1.0 Sec.

	* 4 	2.0 Sec.

	* 5 	4.0 Sec.

	* 6 	8.0 Sec.

	* 7 	0.0 Sec.



peci_legacy



	=	============================================

	0	Standard Mode (default)

		Remote Diode 1 reading is associated with

		Temperature Zone 1, PECI is associated with
@@ -270,10 +293,12 @@ peci_legacy 
	1	Legacy Mode

		PECI is associated with Temperature Zone 1,

		Remote Diode 1 is associated with Zone 4

	=	============================================



peci_diode

	Diode filter



	=	====================

	0	0.25 Sec.

	1 	1.1 Sec.

	2 	2.4 Sec.  (default)
@@ -282,15 +307,20 @@ peci_diode 
	5 	6.8 Sec.

	6 	10.2 Sec.

	7 	16.4 Sec.

	=	====================



peci_4domain

	Four domain enable



	=	===============================================

	0 	1 or 2 Domains for enabled processors (default)

	1 	3 or 4 Domains for enabled processors

	=	===============================================



peci_domain

	Domain



	=	==================================================

	0 	Processor contains a single domain (0) 	 (default)

	1 	Processor contains two domains (0,1)

	=	==================================================