blob: bbc824b2af34de571e0318a091651f6546a2b1dc (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
# SPDX-License-Identifier: GPL-2.0-or-later
# OMAP4460
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME omap4460
}
# Although the OMAP4430 supposedly has an ICEpick-D, only the
# ICEpick-C router commands seem to work.
# See http://processors.wiki.ti.com/index.php/ICEPICK
source [find target/icepick.cfg]
#
# A9 DAP
#
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x3BA00477
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_DAP_TAPID -disable
jtag configure $_CHIPNAME.cpu -event tap-enable \
"icepick_c_tapenable $_CHIPNAME.jrc 9"
#
# M3 DAPs, one per core
#
if { [info exists M3_DAP_TAPID] } {
set _M3_DAP_TAPID $M3_DAP_TAPID
} else {
set _M3_DAP_TAPID 0x4BA00477
}
jtag newtap $_CHIPNAME m31 -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M3_DAP_TAPID -disable
jtag configure $_CHIPNAME.m31 -event tap-enable \
"icepick_c_tapenable $_CHIPNAME.jrc 5"
jtag newtap $_CHIPNAME m30 -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M3_DAP_TAPID -disable
jtag configure $_CHIPNAME.m30 -event tap-enable \
"icepick_c_tapenable $_CHIPNAME.jrc 4"
#
# ICEpick-D JRC (JTAG route controller)
#
if { [info exists JRC_TAPID] } {
set _JRC_TAPID $JRC_TAPID
} else {
set _JRC_TAPID 0x2b94e02f
set _JRC_TAPID2 0x1b85202f
}
# PandaBoard REV EA1 (PEAP platforms)
if { [info exists JRC_TAPID2] } {
set _JRC_TAPID2 $JRC_TAPID2
} else {
set _JRC_TAPID2 0x1b85202f
}
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
-expected-id $_JRC_TAPID -expected-id $_JRC_TAPID2
# Required by ICEpick to power-up the debug domain
jtag configure $_CHIPNAME.jrc -event post-reset "runtest 200"
#
# GDB target: Cortex-A9, using DAP
#
# The debugger can connect to either core of the A9, but currently
# not both simultaneously. Change -coreid to 1 to connect to the
# second core.
#
set _TARGETNAME $_CHIPNAME.cpu
# APB DBGBASE reads 0x80040000, but this points to an empty ROM table.
# 0x80000000 is cpu0 coresight region
#
#
# CORTEX_A8_PADDRDBG_CPU_SHIFT 13
# 0x80000000 | (coreid << CORTEX_A8_PADDRDBG_CPU_SHIFT)
set _coreid 0
set _dbgbase [expr {0x80000000 | ($_coreid << 13)}]
echo "Using dbgbase = [format 0x%x $_dbgbase]"
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
target create $_TARGETNAME cortex_a -dap $_CHIPNAME.dap \
-coreid 0 -dbgbase $_dbgbase
# SRAM: 56KiB at 0x4030.0000
$_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x1000
#
# M3 targets, separate TAP/DAP for each core
#
dap create $_CHIPNAME.m30_dap -chain-position $_CHIPNAME.m30
dap create $_CHIPNAME.m31_dap -chain-position $_CHIPNAME.m31
target create $_CHIPNAME.m30 cortex_m -dap $_CHIPNAME.m30_dap
target create $_CHIPNAME.m31 cortex_m -dap $_CHIPNAME.m31_dap
# Once the JRC is up, enable our TAPs
jtag configure $_CHIPNAME.jrc -event setup "
jtag tapenable $_CHIPNAME.cpu
jtag tapenable $_CHIPNAME.m30
jtag tapenable $_CHIPNAME.m31
"
# Assume SRST is unavailable (e.g. TI-14 JTAG), so we must assert reset
# ourselves using PRM_RSTCTRL. 1 is a warm reset, 2 a cold reset.
set PRM_RSTCTRL 0x4A307B00
$_TARGETNAME configure -event reset-assert "$_TARGETNAME mww phys $PRM_RSTCTRL 0x1"
$_CHIPNAME.m30 configure -event reset-assert { }
$_CHIPNAME.m31 configure -event reset-assert { }
# Soft breakpoints don't currently work due to broken cache handling
gdb_breakpoint_override hard
|
