blob: 5720071343e51132fddec6689d6390b1db84fe49 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
#
# Target configuration for the Silicon Labs EM357 chips
#
#
# em357 family supports JTAG and SWD transports
#
source [find target/swj-dp.tcl]
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME em357
}
# Work-area is a space in RAM used for flash programming
# By default use 4kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x1000
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
if { [using_jtag] } {
set _CPUTAPID 0x3ba00477
} else {
set _CPUTAPID 0x1ba00477
}
}
if { [info exists BSTAPID] } {
set _BSTAPID $BSTAPID
} else {
set _BSTAPID 0x069a962b
}
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME em358
}
if { [info exists FLASHSIZE] } {
set _FLASHSIZE $FLASHSIZE
} else {
set _FLASHSIZE 0x30000
}
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
if { [using_jtag] } {
swj_newdap $_CHIPNAME bs -irlen 4 -expected-id $_BSTAPID -ircapture 0xe -irmask 0xf
}
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME em357 0x08000000 $_FLASHSIZE 0 0 $_TARGETNAME
if { ![using_hla]} {
# according to errata, we need to use vectreset rather than sysresetreq to avoid lockup
# There is a bug in the chip, which means that when using external debuggers the chip
# may lock up in certain CPU clock modes. Affected modes are operating the CPU at
# 24MHz derived from the 24MHz crystal, or 12MHz derived from the high frequency RC
# oscillator. If an external debugger tool asserts SYSRESETREQ, the chip will lock up and
# require a pin reset or power cycle.
#
# for details, refer to:
# http://www.silabs.com/Support%20Documents/TechnicalDocs/EM35x-Errata.pdf
cortex_m reset_config vectreset
}
|
