aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2023-08-12jtag/drivers: Add new driver for ANGIE USB-JTAG AdapterAhmed BOUDJELIDA1-0/+9
This is the driver code for NanoXplore's ANGIE USB-JTAG Adapter. The driver is based on the openULINK project. This driver communicate with ANGIE's firmware in order to establish JTAG protocol to debug the target chip. Since the ANGIE Adapter has a Spartan-6 FPGA in addition to the FX2 microcontroller, the driver adds two functions, one to download the firmware (embedded C) to the FX2, and the second to program the FPGA with its bitstream. Add ANGIE's configuration file to tcl/interface/ Add the device VID/PID to 60-openocd.rules file. Add ANGIE to OpenOCD's documentation Change-Id: Id17111c74073da01450d43d466e11b0cc086691f Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7702 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-31Merge pull request #884 from riscv/from_upstreamTim Newsome5-8/+66
Merge up to a3ed12401 from upstream.
2023-07-19tcl/board: add Espressif board configs with builtin usb jtagErhan Kurubas3-0/+45
Board config files, to allow communication with the builtin USB-JTAG adapter. Change-Id: I80fb0c36b3cc164940ff266f1eaa287d870da94d Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
2023-07-19tcl/target: add Espressif riscv targets (ESP32-C6, ESP32-H2)Erhan Kurubas2-0/+264
ESP32-C6 and ESP32-H2 are single core riscv targets. Change-Id: If92429de4fb67a040f303a54177d61b70e1ea281 Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
2023-07-19tcl/target: update esp32c2.cfg to reference shared functions in the ↵Erhan Kurubas1-62/+68
esp_common.cfg This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Change-Id: I825dd4fddb88e5514429d49ab13869ee6b9a28fc Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
2023-07-19tcl/target: update esp32c3.cfg to reference shared functions in the ↵Erhan Kurubas2-65/+52
esp_common.cfg This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Ie3413d3149388b17bc0199409ce86d3eb7cf5ee2
2023-07-19tcl/board: add esp32s3-builtin.cfg fileErhan Kurubas1-0/+15
Board config file for ESP32-S3, to allow communication with the builtin USB-JTAG adapter. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I1310f5db30f7df38fe9344f7ba2334611b53863e Reviewed-on: https://review.openocd.org/c/openocd/+/7749 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-19tcl/interface: add Espressif builtin usb_jtag config file.Erhan Kurubas1-0/+9
This config file enables communication over USB-JTAG with ESP32-C3, ESP32-S3, ESP32-H2 and ESP32-C6 chips Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Iceea26972588d8c4919d1f3248684ece48ca9121 Reviewed-on: https://review.openocd.org/c/openocd/+/7748 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-19tcl/target: update esp32s3.cfg to reference shared functions in the ↵Erhan Kurubas1-92/+12
esp_common.cfg This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Ifb0122f3b98a767f27746409499733b70fb7d0e8 Reviewed-on: https://review.openocd.org/c/openocd/+/7747 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-19tcl/target: update esp32s2.cfg to reference shared functions in the ↵Erhan Kurubas1-50/+12
esp_common.cfg This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I36c86fe4ebc99928ce48a5bff8cb9580a0fa3ac0 Reviewed-on: https://review.openocd.org/c/openocd/+/7746 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-19tcl/target: update esp32.cfg to reference shared functions in the esp_common.cfgErhan Kurubas1-79/+15
This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I9181737d83eeba4e983b6a455b8a1523f2576dd2 Reviewed-on: https://review.openocd.org/c/openocd/+/7745 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-19tcl/target: move Espressif shared functions to esp_common.cfgErhan Kurubas1-5/+178
Consolidate commonly used commands and variables from chip config files into functions in esp_common.cfg. This includes "jtag newtap," "target create,"and "configure -event." Enhances code reusability and simplifies maintenance. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I9e8bf07a4a15d4544ceb564607dea66837381d70 Reviewed-on: https://review.openocd.org/c/openocd/+/7744 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14tcl/board: add esp32s3-builtin.cfg fileErhan Kurubas1-0/+15
Board config file for ESP32-S3, to allow communication with the builtin USB-JTAG adapter. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I1310f5db30f7df38fe9344f7ba2334611b53863e Reviewed-on: https://review.openocd.org/c/openocd/+/7749 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-14tcl/interface: add Espressif builtin usb_jtag config file.Erhan Kurubas1-0/+9
This config file enables communication over USB-JTAG with ESP32-C3, ESP32-S3, ESP32-H2 and ESP32-C6 chips Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Iceea26972588d8c4919d1f3248684ece48ca9121 Reviewed-on: https://review.openocd.org/c/openocd/+/7748 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14tcl/target: update esp32s3.cfg to reference shared functions in the ↵Erhan Kurubas1-92/+12
esp_common.cfg This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Ifb0122f3b98a767f27746409499733b70fb7d0e8 Reviewed-on: https://review.openocd.org/c/openocd/+/7747 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14tcl/target: update esp32s2.cfg to reference shared functions in the ↵Erhan Kurubas1-50/+12
esp_common.cfg This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I36c86fe4ebc99928ce48a5bff8cb9580a0fa3ac0 Reviewed-on: https://review.openocd.org/c/openocd/+/7746 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14tcl/target: update esp32.cfg to reference shared functions in the esp_common.cfgErhan Kurubas1-79/+15
This commit enhances code reusability, simplifies maintenance, and ensures consistency across all chip configurations by consolidating commonly used commands and variables into the common config file. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I9181737d83eeba4e983b6a455b8a1523f2576dd2 Reviewed-on: https://review.openocd.org/c/openocd/+/7745 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-14tcl/target: move Espressif shared functions to esp_common.cfgErhan Kurubas1-3/+182
Consolidate commonly used commands and variables from chip config files into functions in esp_common.cfg. This includes "jtag newtap," "target create,"and "configure -event." Enhances code reusability and simplifies maintenance. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I9e8bf07a4a15d4544ceb564607dea66837381d70 Reviewed-on: https://review.openocd.org/c/openocd/+/7744 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14tcl/ultrascale: add more ultrascale devicesDaniel Anselmi1-26/+73
Add more ultrascale devices. Set instruction codes for SSI devices such that refresh/program read_stat and user registers will work. Change-Id: Id0a0706f4016eb8a4732725a5b72ae61efd73421 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7716 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14tcl/cpld: add config files for virtex-7 devices with ir-length > 6Daniel Anselmi4-9/+90
Adding a single file for each different ir-length. Change-Id: Iba3dd55b91c28fdb4d0cafa1ededd939fe61a267 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7715 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-12Merge commit 'a3ed12401b1f7d9578fb7da881d3504e07acfc27' into from_upstreamTim Newsome5-8/+66
Conflicts: src/target/riscv/riscv-013.c src/target/riscv/riscv.c Change-Id: I65bdb4d28c91e9022ce811de976c9bf474a0b590
2023-07-08jtag/stlink: add STLINK-V3PWR supportLaurent LEMELE2-2/+2
STLINK-V3PWR is both a standalone debugger probe compatible with STLINK-V3 and a source measurement unit (SMU). Link: http://www.st.com/stlink-v3pwr This code adds support for the debugger probe functionality. Change-Id: Ib056e55722528f922c5574bb6fbf77e2f2b2b0c1 Signed-off-by: Laurent LEMELE <laurent.lemele@st.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7755 Tested-by: jenkins
2023-07-08ipdbg/pld: ipdbg can get tap and hub/ir from pld driver.Daniel Anselmi2-2/+2
To start a ipdbg server one needs to know the tap and the instruction code to reach the IPDBG-Hub. This instruction is vendor/family specific. Knowledge which can be provided by the pld driver. Change-Id: I13eeb9fee895d65cd48544da4704fcc9b528b869 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7369 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-08pld/virtex2: add program/refresh commandDaniel Anselmi4-0/+5
Change-Id: If6d237a6f27c4232849f73d08e7ca74276e6d464 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7714 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-08tcl/cpld: add config files for more xilinx fpga familiesDaniel Anselmi9-1/+194
Use configurable virtex pld driver to add support for more xilinx fpga families. Change-Id: Iff10c8c511787734fa289bdba15f03131d51e071 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7352 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-08pld: give devices a name for referencing in scriptsDaniel Anselmi17-17/+17
Change-Id: I05e8596ffacdb6cd8da4dd8a40bb460183f4930a Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7728 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-08tcl/board/bemicro: source cycloneiii.cfg from correct pathDaniel Anselmi1-1/+1
Change-Id: Ib1d1be1067107633949a202a05f7fd06831ba84b Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7751 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-10target/ti-cjtag: make switching to JTAG more reliableLorenz Brun1-0/+1
The current cJTAG to JTAG switching commands for TI chips are not particularly reliable, especially on chips with accurate timing. On a Raspberry Pi the existing sequence has (depending on cabling and chip) a ~50% chance of working, on a much better-behaved FT2232H it doesn't manage to enable full JTAG at all. This change runs a bunch of test-idle cycles before actually attempting to switch to full JTAG. This makes the switch reliable even at high clock speeds (>100kHz) and from precise sources like the FT2232H. Change-Id: I9293e884bf3e9606d529756ae4483b844d3c39db Reported-by: Phil Wiggum <p1mail2015@mail.com> Fixes: https://sourceforge.net/p/openocd/tickets/375/ Signed-off-by: Lorenz Brun <lorenz@brun.one> Reviewed-on: https://review.openocd.org/c/openocd/+/7419 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-10flash/nor: add support for NXP QN908xiosabi1-0/+38
This patch adds support for the NXP QN908x family of Bluetooth microcontrollers, such as the QN9080. This chip features a Cortex-M4F with 512 KiB of flash on all the available versions, although the documentation suggests that there might be 256 kB versions as well. The initial support allows to read, erase and write the whole user flash area. Three new sub-commands under the new "qn908x" command are added in this patch as well: disable_wdog to disabled the watchdog, mass_erase to perform a mass erase and allow_brick to allow programming images that disable the SWD interface. Disabling the watchdog is required after a "reset halt" in order to run the CRC algorithm from RAM when verifying the chip. However, this is not done automatically on probing or other initialization since disabling the watchdog might interfere with debugging real applications. The "mass_erase" command allows to erase the whole flash without probing it, since in some scenarios the chip can be locked such that no flash or ram can be accessed from the SWD interface, allowing only to run a mass_erase to be able to flash the program. The flashing process allows to compute a checksum, similar to the lpc2000 driver "calc_checksum" but done over a different region of the memory. This checksum is required to be present for the QN908x bootloader ROM to boot, and otherwise is useless. As with the lpc2000 design, verification when using "calc_checksum" is expected to fail if the checksum was not valid in the image being verified. This was manually tested on a QN9080, including the scan-view, AddressSanitizer/UBSan and test coverage configurations. Change-Id: Ibd6d8f3608654294795085fcaaffb448b77cc58b Co-developed-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de> Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de> Signed-off-by: iosabi <iosabi@protonmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/5584 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-06-02jtag/vdebug: adding xtensa configJacek Wuwer3-27/+194
This change adds the extensa sample target and board configurations. it removes the obsoleted vd_xtensa_jtag.cfg from targets. Change-Id: I9d4d25abde46c0b15e5211a973012447872cb405 Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7723 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-06-02tcl/board/calao-usb-a9g20-c01: add proper initializationWolfram Sang1-0/+158
Initialize clocks to max speed and setup SDRAM. NAND support is still incomplete. Originally found at: elinux.org/index.php?title=Calao_Atmel_AT91_development_board&oldid=73933 Updated the code from 2011 and improved it a bit. Signed-off-by: Wolfram Sang <wsa@kernel.org> Change-Id: I83474e07c8de8cc3b5d058029551935549693ef9 Reviewed-on: https://review.openocd.org/c/openocd/+/7578 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-06-02Add/Correct STM8L15xx2/3/4/6/8 devicesDominik Wernberger7-2/+170
Change-Id: I83fe1e50821ec15e1853aca96ebb32fe1ff5328f Signed-off-by: Dominik Wernberger <dominik.wernberger@gmx.de> Reviewed-on: https://review.openocd.org/c/openocd/+/7690 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-05-27flash/jtagspi: sending command and setting parameters without probing.Daniel Anselmi1-1/+11
Change-Id: I6b9d90265ca5112b9ab2aae97bb4c6cf3ebc4112 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7432 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2023-05-24flash/stm32l4x: support STM32C0x devicesTarek BOCHKATI1-0/+74
this new STM32 series family introduces 2 devices: STM32C011xx (0x443) and STM32C031xx (0x453) both devices have 32 Kbytes single flash bank. Change-Id: I4e890789e44e3b174c0e9c0e1068383ecdbb865f Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6874 Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Tested-by: jenkins Reviewed-by: zapb <dev@zapb.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-05-18tcl/target: Add support for TMS570LC43xxPhil Kirkpatrick2-9/+9
Added support for TMS570LC43xx series parts. This uses the pre-existing ti_tms570.cfg parent config. In ti_tms570.cfg, dbgbase was changed. Note 1: Based on the following TI E2E post, the previous dbgbase was wrong and the new value isn't due to a difference in parts. Link: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1106954/tms570ls3137-debugging-with-openocd Note 2: Both the previous dbgbase and the one suggested in the TI E2E post have the 2 LSB set. In the current version of OpenOCD, this will cause cortex_a_read_cpu_memory_fast and cortex_a_write_cpu_memory_fast to fail due to an alignment checks in mem_ap_<read/write>_buf_noincr()->mem_ap_<read/write>(). In all other uses of dbgbase for arm cortex parts, the 2 LSB are masked and ignored. Change-Id: Ic936722e5a4cfc7161b0df1fe3325ee12fd901c6 Signed-off-by: Phil Kirkpatrick <p.kirkpatrick@reflexaerospace.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7682 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-05-04Merge commit '228fe7300c7df7aa05ba2c0bc19edde6d0156401' into from_upstreamTim Newsome18-272/+245
Conflicts: doc/openocd.texi src/jtag/aice/aice_pipe.c src/jtag/aice/aice_usb.c src/rtos/FreeRTOS.c src/rtos/hwthread.c src/rtos/rtos_standard_stackings.c src/target/riscv/riscv.c Change-Id: I0c6228c499d60274325be895fbcd8007ed1699bc
2023-04-30pld: add support for cologne chip gatemate fpgasDaniel Anselmi2-0/+32
Change-Id: I0bf5a52ee6a7f0287524619114eba0cfccf6ac81 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7565 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-04-30pld: add support for gowin devicesDaniel Anselmi2-0/+48
Change-Id: Idd1a09514bbbbe0a7b54d69010f6c2f91215fd1d Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7368 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-04-30pld: add support for altera/intel devicesDaniel Anselmi13-49/+304
Change-Id: I7977d39c9037ae71139f78c8d381f5f925dc3489 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7355 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-04-30pld: add support for efinix devicesDaniel Anselmi3-0/+64
Change-Id: Ie520e761c255ba1335d5aab9c6825f160a6151d9 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7288 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-04-30pld: add support for lattice certus devicesDaniel Anselmi3-0/+50
Change-Id: Ic50a724e5793000fca11f35ba848c2d317c3cbab Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7398 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-04-30pld: add support for lattice ecp5 devicesDaniel Anselmi2-0/+21
Change-Id: Ib2f0933da3abe7429abca86d6aaa50ad85ce72c7 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7397 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-04-30pld: add support for lattice ecp2 and ecp3 devicesDaniel Anselmi2-0/+53
Change-Id: I29c227c37be464f7ecc97a30d9cf3da1442e2b7f Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7396 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-04-30tcl/target: renesas gen3 Set target to armv8r for Cortex-R52Julien Massot1-8/+13
Cortex-R52 is an ARMv8-R processor supporting only AArch32 Profile. Signed-off-by: Julien Massot <julien.massot@iot.bzh> Change-Id: I663ae4bf1d3026d7c9e4c5950a79e7ddf1bd6564 Reviewed-on: https://review.openocd.org/c/openocd/+/6805 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-04-14tcl: cpld/xilinx-xc7: remove virtex-7 devices with ir-length > 6Daniel Anselmi1-8/+10
They have an ir length of 22, 24 or 38 bit and different command codes. Change-Id: I488e8613f1c4d017e1590111f60b2725ec62964b Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7387 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-04-14tcl: zynq_7000: add missing id codesDaniel Anselmi1-4/+20
Add missing ID codes and ignore the version in the ID. Change-Id: Idd2d3a5eddb6995f3af1c45afd2adf76ce3442bf Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7386 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-03-28tcl/board: add Calao USB-A9G20Wolfram Sang1-0/+14
Add a basic config. Signed-off-by: Wolfram Sang <wsa@kernel.org> Change-Id: Ie68e5fbb26b1c2f3028e561af0255fa71ec61828 Reviewed-on: https://review.openocd.org/c/openocd/+/7524 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-03-28tcl/board/calao-usb-a9260: fix and refactor broken supportWolfram Sang4-60/+14
The old configuration files did not work because of a missing 'at91sam9260minimal.cfg' file. Also, the config files were placed wrongly. Update them, put them to the proper location, merge the two supported boards into one, remove now superfluous include, remove defunct web page, etc.. Tested with a Calao USB-A9G20 and a hacked 'device_desc' to match. Native support for it will come next. Signed-off-by: Wolfram Sang <wsa@kernel.org> Change-Id: Iec578c8777c5a6134e132dbac17c2988c7634742 Reviewed-on: https://review.openocd.org/c/openocd/+/7522 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-03-18tcl: remove exec permission to tcl config filesAntonio Borneo2-0/+0
With the new checkpatch we will not get this type of issues anymore. In mean time, let's fix what we have missed during the review process. Change-Id: Iecebf9d43f51a29ee09505d360792793afd24b40 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: 53556fcded05 ("tcl/interface: add Ashling Opella-LD FTDI config files") Reviewed-on: https://review.openocd.org/c/openocd/+/7530 Tested-by: jenkins
2023-03-18tcl/tools/test_cpu_speed: Fix register nameMarc Schink1-1/+1
Use correct register name after it has beed changed in commit 11ee500bffe4 ("target/armv7m: Rename xPSR to xpsr") Change-Id: I3648848f4b47af2d20d60c3e0ecef78f75f6d605 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/7473 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
generated by cgit v1.1 at 2025-09-19 00:42:18 +0000