aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2013-03-13doc: opendous interface based on ft2232HRodrigo Melo1-1/+9
It was listed in the ft2232 based cables supported. Moreover, the ft2232_channel option, which was added to support this cable, was explained. Change-Id: I82ebc7bc10d6472f96ab150e78d623a617edccd2 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1098 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13doc: Added MIPS target documentDrasko DRASKOVIC3-0/+538
This document explains MIPS EJTAG operations implementations within OpenOCD. Change-Id: Ieaf01f8bc5a97d7b0f2c847bac5fbb2ccf8ba088 Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Reviewed-on: http://openocd.zylin.com/904 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-12tcl: add flash programming helperSpencer Oliver1-0/+42
This adds a program proc that simplifies using OpenOCD as a standalone programmer. Change-Id: I6ece492cd878c170b734e8bb2e09fe8c4557d5a6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1199 Tested-by: jenkins Reviewed-by: Jörg Fischer <turboj@gmx.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2013-02-25stm32: enable flash bank size overrideSpencer Oliver1-0/+31
It has been seen on some stm32 targets that the flash size register that is probed by the driver may contain an invalid size. This change enables the user to override the probed value. Change-Id: I09359e59a96f9133d3d939670957d32a830a944e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1132 Tested-by: jenkins Reviewed-by: Johan Almquist <johan.almquist@assaabloy.com>
2013-01-21docs: update stm32f1x/stm32f2x driver infoSpencer Oliver1-5/+17
As we use the two ST flash drivers for multiple stm32 variants update the docs as to which targets use which driver. Change-Id: I84943ff45482a22b3d3dd8491bb4242d79415939 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/990 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-01-14flash: EFM32 flash implementationRoman D1-3/+15
Limited (no page unprotect, no block writes) implementation of EFM32 flash support. Verified with EFM32 development kit and STLink V2 adapter using SWD. Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c Signed-off-by: Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1106 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-01-03doc: Add documentation for the ftdi driverAndreas Fritiofson1-0/+117
Change-Id: I1ade2eb187b404141051d9f59ba06e8e6e5d51aa Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1099 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-12-23doc: replace luminary with TI urls'sSpencer Oliver1-5/+5
Change-Id: Ic8a768f5a498e78b96421c6137238593c159fd72 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/970 Tested-by: jenkins
2012-12-23docs: update docs to include info on TI ICDISpencer Oliver1-9/+18
Change-Id: I3009920f512f76901d187318ee50284db34ab6f7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/924 Tested-by: jenkins
2012-12-10jtag: add connect_type reset_config mode flagSpencer Oliver1-4/+15
This adds the ability to request to the adapter how we want to connect to the target, eg. while srst is asserted or not. This ability can very handy for connecting to unresponsive targets. A prerequisite is that the target supports srst_nogate. Change-Id: I0f7c9475160048e8a963e16077754f5403ac8325 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/976 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-18docs: mention extended-remote supportSpencer Oliver1-0/+5
Change-Id: Idd7cc0364856082cbbfee5015e49cd7d237d68ef Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/913 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-16rtos: Add ChibiOS/RT supportMatthias Blaicher1-1/+1
This patch adds ChibiOS/RT support. This patch requires at least ChibiOS/RT development version starting from SVN revision 4734. Note, that the Thread structures depend not only on the target but also on the ChibiOS configuration at build time. To correct this ChibiOS includes a new "memory signature" which specifies the offsets. Special thanks go to Peter Stuge and Spencer Oliver for their continous input and feedback to this patch. Change-Id: I842bf7ba6c2309a4efe93d29ea6cd0784a8b22a3 Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/901 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris1-0/+24
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-06docs: add user mailing list and irc infoSpencer Oliver1-1/+12
Change-Id: I7000b5ab2967f8dc4cea8983978fce824ea1f98e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/807 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30doc: add missing ulink v1 to supported interfacesSpencer Oliver1-0/+7
Change-Id: Ic497a3f9076ec1799ca715a99bc2e634bd1af40d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/761 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-06-26docs: J-Link commands added to the manualLiviu Ionescu1-27/+50
The J-Link related commands and configuration commands were added to the "8.2 Interface Drivers" section of the manual. (previously they were enumerated as comments). The 'jlink pid' was marked as Config all other as Command. A draft of a compatibility note was added, but probably a table would be more appropriate. Change-Id: Ifbe230706815196aaad4e3729ed5089d5088b769 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/680 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-21target: enable TARGET_EVENT_EXAMINE_* eventsSpencer Oliver1-6/+3
Change-Id: I33efc0994b7bfe0faa2f4e8457fcc3c8e43d3571 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/635 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: remove legacy target eventsSpencer Oliver1-6/+0
These events have been deprecated for a number of years, update any remaining scripts to the new events. Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/634 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: remove duplicate target eventsSpencer Oliver1-2/+0
Change-Id: Iba9ae441f3e6d48a7dfafe59ed093fef56a34723 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/633 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21UserGuide: Updated list of supported interfaces, boards, and targets.Bill Traynor1-63/+155
User Guide: Chapter 6 'Config File Guidelines'. The directory listings of interfaces, boards, and targets has been brought up to date. Change-Id: I53f218a94cb81c5e90298b367259e833192af5f3 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/646 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14docs: Fix incorrect -rtos option valuesPeter Stuge1-2/+2
Commit 9ca1592cb9fe4e61ee5bc327345fdfc254c9fe13 started on documentation for the -rtos option, but some of the documented values were incorrect so we'll clean up the mess here. Many thanks to Freddie Chopin for spotting this! Change-Id: Iaa633bd40ff5f75dd6a69e74e79dafc1643ee21a Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/642 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-05-14docs: add initial target rtos support infoSpencer Oliver1-0/+4
Change-Id: Idd39ce17922602aedd4626496ed8f5422bb76e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/641 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-14jtag: add opendous and estick supportSpencer Oliver1-0/+10
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/611 Tested-by: jenkins
2012-05-14stlink: add stlink_api cmdSpencer Oliver1-0/+20
This enables the manual selection of the stlink api version. Change-Id: I0ec8c5b0a101b6456f426d2fec65971da56db4e7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/617 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-04-26topic: Added support for the SAM4S variantsOlivier Schonken1-0/+8
Atmel introduced 6 new Cortex-M4 processors on 2011-10-26 SAM4S16C - 1024KB flash LQFP100/BGA100 SAM4S16B - 1024KB flash LQFP64/QFN64 SAM4S16A - 1024KB flash LQFP48/QFN48 SAM4S8C - 512KB flash LQFP100/BGA100 SAM4S8B - 512KB flash LQFP64/QFN64 SAM4S8A - 512KB flash LQFP48/QFN48 The SAM4S processors still suffer from the "6 waitstates needed to program device" errata. Other relevant changes are: 1. Address of flash memory starts at 0x400000. 2. EWP (Erase page and write page) only works for the first two 8KB "sectors" 3. Because of the EWP not working for all the sectors, normal page writes have to be used. The default_flash_blank_check is used to check if lockregions should be erased. 4. The EA (Erase All) command takes 7.3s to complete. (Previous timeout was 500 ms) 5. There are 128 lockable regions of 8KB each. Implemented default blank checking, and page erase for load_image scenarios. This is to compensate for the EWP flash commands only working on the first 2 8KB sectors. Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/528 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23UserGuide: Fixing link to USBprog tool.Bill Traynor1-1/+1
In section '2.8 USB Other' updated the link to the USBprog tool: http://shop.embedded-projects.net/ Change-Id: I7fa453934ac6a7889e01b22b7e0cb07f42ee168d Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/591 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23UserGuide: Updated link to Versaloon-Link tool.Bill Traynor1-1/+1
In section '2.8 USB Other' updated the URL to the Versaloon-Link to: http://www.versaloon.com Change-Id: Idd92333cb3d87d1b89dfb282134332387df5a0fc Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/592 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23UserGuide: Fixed link to Wiggler2 project.Bill Traynor1-3/+2
In section '2.9 IBM PC Parallel Printer Port based' fixed link to the Wiggler2 project and removed the alternate URL text to retain style consistency with the other URLs in the document: http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag Change-Id: I879db1c6eaf683ca6475a0f466f987087c9d60d0 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/593 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23UserGuide: Fixed link to ST flashlink.Bill Traynor1-2/+1
In section '2.9 IBM PC Parallel Printer Port Based' fixed link to ST's flashlink PDF and removed alternate URL text: http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/ DATA_BRIEF/DM00039500.pdf Change-Id: I99702dd00d4145784baee1f63b5998bf79e06678 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/594 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23UserGuide: Fixing two typos.Bill Traynor1-2/+2
In Section 2.7 USB ST-LINK based made these two changes: "they only works with" to "they only work with" "following method's" to "following methods" Change-Id: Idfe6c11c3fa6f2157d01697cd7f480a9d495c8e2 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/590 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20UserGuide: Fixed link to Raisonance RLINK.Bill Traynor1-1/+1
In section 2.6 USB JLINK based, fixed link to RLINK: http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool ~tool__T018:4cn9ziz4bnx6.html Change-Id: I15f7a1b68b851054e07eefc07a50b4590ebce677 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/588 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20UserGuide: Update Section 2.3 USB FT2232 BasedBill Traynor1-2/+3
Updated the link for the usbjtag project to the correct URL: http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html Added a NOTE to indicate the axm0432_jtag as no longer being available from the axman.com page. Change-Id: I70727303dad58d9dc0c5f9b7cce219288b762042 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/583 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20UserGuide: Add ref. to Flyswatter2Bill Traynor1-1/+1
Added the Flyswatter2 to section 2.3 USB FT2232 Based hardware list. Change-Id: I6a382644b5a0313d30afb5a97d0a9ea00f01efa9 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/584 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20UserGuide: Fixed link to USB-JTAG project.Bill Traynor1-1/+1
Updated the URL to Kolja Waschk's USB-Blaster compatible adapter: http://ixo-jtag.sourceforge.net/ Change-Id: If9d2875b5ba5d3bfaaf524cd253a5fab53e05371 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/585 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20UserGuide: Fixed link to IAR J-Link.Bill Traynor1-1/+1
In Section 2.5 USB JLINK based, fixed the URL for IAR J-Link: http://www.iar.com/en/products/hardware-debug-probes/iar-j-link/ Change-Id: If613d2e915a0a704569d74094e612e34bcc849d3 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/586 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-18zy1000: fixed link to Zylin ZY1000 JTAG ProbeBill Traynor1-1/+1
This patch fixes the link to the Zylin ZY1000 JTAG Probe webpage. The ZY1000 product line was acquired by Ultimate Solutions, Inc. in May 2011. Change-Id: If68cd45a0c47aa20b2e4bb62939b2c505c8c8c2e Signed-off-by: Bill Traynor <wmat@alphatroop.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/571 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10ft2232: Support for Digilent HS1 USB adapterStephane Bonnet1-0/+2
* Added support to the FT2232 driver for the FT2232H-based Digilent HS1 adapter. Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27 Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr> Reviewed-on: http://openocd.zylin.com/558 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-04docs: remove unused primer refSpencer Oliver1-1/+0
we already have a link to the patch primer in the main index. Change-Id: Ib90ade76a17f5d99da8fe481d8f87c68eca38f1c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/546 Tested-by: jenkins
2012-03-30docs: update release docs to use configure.acSpencer Oliver1-7/+7
Change-Id: I7b52ad1c3744a82832c5b55898bf47607e24d03e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/538 Tested-by: jenkins
2012-03-13docs: add stm32 dual bank exampleSpencer Oliver1-0/+6
Change-Id: I1dfe134e2c7694fc978d14b4b21bdf9c82ca4b16 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/507 Tested-by: jenkins
2012-03-11flash: retire unused eCos flash driverØyvind Harboe1-7/+0
even the AT91EB40a's flash is covered by CFI and nobody ever submitted any other drivers based on eCos code. It's just possible that this idea was missing documentation and "marketing", but it's in git if somebody wants to resurrect it. Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-26jtag: use correct tap -ignore-version maskSpencer Oliver1-1/+1
when -ignore-version is used we should mask of the upper 4bits not 8bits. Change-Id: I9ffe24c2aeeb414677357a647609fdf018890194 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/473 Tested-by: jenkins
2012-02-22docs: fix more texinfo warningsSpencer Oliver1-1/+1
A period or comma must follow the closing brace of an @xref. Change-Id: Ida5dc3600eca328d95b0a8f6b5c9fe0a0f3ba820 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/475 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-16docs: fix texinfo warningsSpencer Oliver1-5/+5
A period or comma must follow the closing brace of an @xref. Change-Id: I272f1e7fac8f1fee4844f485b0b8e2e4e9cf352d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/456 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-13docs: correct small typoSpencer Oliver1-1/+1
Change-Id: I5e8bea591274b4032d3e04c4be7e9110138d5bc2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/447 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-13Add init_board documentationFreddie Chopin1-0/+43
This patch adds init_board concept information to OpenOCD manual. Additionally a link from init_targets chapter to new chapter about init_board is added. Change-Id: I09b9aaa1cf68b94f35701224f641cae9811a5bcf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/440 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-09Add missing init_targets documentationFreddie Chopin1-0/+40
Add init_targets procedure documentation to OpenOCD manual explaining the concept. Change-Id: I82933ed90397cbcdc5c72801182573ca69b1d265 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/439 Reviewed-by: Chris Morgan <chmorgan@gmail.com> Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07docs: add original stlink (STLINK-V1) usage noteSpencer Oliver1-0/+8
Add a note to the docs about the original stlink being broken under linux. Change-Id: Ib440d78e5c7d31eeace99f611a76fcf701bfb8bc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/433 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-01-18doc: Update patch procedureTimo Ketola2-173/+1
Change-Id: I3e50357b4ddaf483712bbac68b6427b31529f666 Signed-off-by: Timo Ketola <timo@exertus.fi> Reviewed-on: http://openocd.zylin.com/387 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-09docs: add initial st-link infoSpencer Oliver1-0/+17
Change-Id: I213bf26dec582fd8e273e604d43a6e849599dd50 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/340 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
generated by cgit v1.1 at 2024-10-31 15:27:23 +0000