aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2024-03-16ipdbg: configurable queue size used between JTAG-Host and JTAG-HubDaniel Anselmi1-0/+14
Change-Id: I7941de02a968ccab730bfebd3483b8c3b84d7e53 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7980 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2024-03-16ipdbg: split ipdbg command into multiple commandsDaniel Anselmi1-23/+52
To simplify the ipdbg start/stop command and be able to add additional commands in the future, we introduce the concept of a hub which has to be created before a ipdbg server can be started. The hub was created on the fly in previous versions. Change-Id: I55f317542d01a7324990b2cacd496a41fa5ff875 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7979 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2024-03-09target/mips32: add dsp access supportWalter Ji1-0/+5
Add access to dsp registers and a command for dsp related operations. Checkpatch-ignore: MACRO_ARG_REUSE Change-Id: I30aec0b9e4984896965edb1663f74216ad41101e Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7867 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-03-09flash/nor/nrf5: drop nrf5 info commandTomas Vanek1-4/+0
The command substantially complicates support of nRF53/91 series. It was not even properly ported to nRF52. The informative value is disputable. Who wants to see e.g. override trim values for radio or unique device ID? Drop it and simplify the driver. Change-Id: Ia7fb20ce2ebf16065705c5d18deaf934e58db426 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/8108 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-02-11helper/log: report the file in `log_output` commandEvgeniy Naydanov1-3/+4
Prior to the change when calling `log_output` without any arguments it was unclear where the log was redirected. Change-Id: Iaa3ecea8166f9c7ec8aad7adf5bd412799f719a1 Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8071 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-02-11jtag/drivers: Add vid_pid command to OpenJTAGN S1-0/+9
Enable support for USB vid and pid combinations other than 0x0403/0x6001 on OpenJTAG adapters. Change-Id: Ibb5fb14a6f33abbc011dbf3179df20d79ed74a7a Signed-off-by: N S <nlshipp@yahoo.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8100 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-01-13jtag/drivers: Add GPIO extender configuration function to ANGIE driverAhmed BOUDJELIDA1-11/+2
Add GPIO extender initial configuration that is needed to configure some important GPIOs and ensure that the dev board is ready to work. Add i2c_write function that make a write transfer to any slave device. Give a new Product ID to ANGIE to make it different than the non programmed ANGIE. Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8072 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-01-13helper/command: pass command arguments also as Jim_ObjAntonio Borneo1-0/+2
Some OpenOCD command gets fragment of TCL scripts as command-line argument, fragments that will be kept and executed later on. E.g. the command 'configure' gets the body of an OpenOCD event: $TARGET configure -event halted {TCL code} These commands store the argument as a Jim_Obj and pass it to the jimtcl interpreter when the TCL fragment has to be executed. Using Jim_Obj as storage is relevant to let the jimtcl interpreter to recover extra info of the TCL fragment, like the file-name and the line-number that contain the fragment, that will be printed out in case of run-time errors. While converting the commands to COMMAND_HANDLER, we should avoid storing the argument as C strings otherwise we will loose precious info in case of run-time errors making challenging the debugging of such TCL fragments. Extend the struct command_invocation to contain the array that points to the Jim_Obj of the command arguments. This will be used while converting commands to COMMAND_HANDLER. Change-Id: If37c5f20e9a71349f77ba1571baf1e6778e28aa5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8057 Tested-by: jenkins
2024-01-13target/xtensa: extra debug info for "xtensa exe" failuresianst1-4/+5
- Read and display EXCCAUSE on exe error - Clean up error messages - Clarify "xtensa exe" documentation Signed-off-by: ianst <ianst@cadence.com> Change-Id: I90ed39f6afb6543c0c873301501435384b4dccbe Reviewed-on: https://review.openocd.org/c/openocd/+/7982 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-01-06flash/nor/kinetis: add support for NXP S32K seriesDavid Vidrie Leon1-4/+12
S32K General-Purpose Microcontrollers Scalable, low-power Arm® Cortex®-M series-based microcontrollers AEC-Q100 qualified with advanced safety and security and software support for industrial and automotive ASIL B/D applications in body, zone control, and electrification. Change-Id: I4143258535437c18b81802436267bfd561de9d31 Signed-off-by: David Vidrie Leon <davidvidrie@geotab.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8012 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2024-01-06doc: `address` is optional in `*_image` commandsEvgeniy Naydanov1-7/+15
Change-Id: I3d4320634bf59be18bbcb22c9e4b13a3ccd7a45a Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8061 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
2024-01-06target/mips32: add mips ejtag commandWalter Ji1-1/+8
Add mips32 ejtag_reg command for inspecting ejtag status. Add description for mips32 ejtag_reg command. Change-Id: Icd173d3397d568b0c004a8cc3f45518d7b48ce43 Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7906 Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2024-01-06target/mips32: update coprocessor 0 commandWalter Ji1-5/+7
Update mips32 cp0 command, it accepts cp0 reg names now. Updated mips32 cp0 description. Change-Id: Ib23dd13519def77a657c9c5bb039276746207b9b Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7905 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: jenkins
2024-01-06target/mips32: add cpu info detectionWalter Ji1-0/+58
Add detection for mips cpu types by using prid. Add cpuinfo command for inspecting more verbose info. Add MIPS Architecture specs in openocd docs. Change-Id: I28573b7c51783628db986bad0e226dcc399b4fa6 Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7912 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2024-01-06doc: usb_adapters: update the script for unavailable reportsAntonio Borneo1-0/+18
When Linux HID driver binds the USB endpoints of the adapter, 'lsusb' fails to read all the reports and prints ** UNAVAILABLE ** Detect this case and alert the user, providing also the proper command to unbind the driver before running the script again. Put this test at the end of the output, so user can easily see it. Change-Id: Iaca00040e666b62ceebe4b842a24932799bde56a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/8046 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-12-30doc/openocd: Mention APM32F1 and APM32F4 seriesMarc Schink1-1/+2
Change-Id: I2ff28b0fdf4923a58771a44ad6e83ac871d6fa9e Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/8018 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-12-30flash/nor/stm32f1x: Add support for Geehy APM32F0 seriesMarc Schink1-6/+4
Tested with APM32F030C8T. Change-Id: I63cd8b66424135dae481a96ba560e6f0b1f9544e Suggested-by: Christian U <info@cu-tec.de> Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/8014 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-12-30jtag: add -ir-bypass option to newtapHenrik Nordström1-0/+4
Some devices with an internal multi-tap JTAG router require a vendor specific bypass instruction to bypass the master TAP when addressing slave taps internal to the same device. On these devices the standard bypass instruction bypasses the whole device. Change-Id: I4506f0e67c9e4dfe39b7fa18c63d67900313e594 Signed-off-by: Henrik Nordström <henrik.nordstrom@addiva.se> Reviewed-on: https://review.openocd.org/c/openocd/+/8041 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-12-24doc: usb_adapters: fix HID report in lsusb dump of few adaptersAntonio Borneo5-12/+137
Real dumps from adapters I have access to. Serial numbers have been manually edited but are still consistent. While there, rename a file to correct the USB PID. Change-Id: I4fd0b6661d55294c2ce0ecbead765def1143880c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: e0059dfffae4 ("doc: usb_adapters: add lsusb dump of few adapters") Reviewed-on: https://review.openocd.org/c/openocd/+/8047 Tested-by: jenkins
2023-12-16remote_bitbang: add use_remote_sleep option to send delays to remoteJeremy Herbert2-2/+30
If the remote_bitbang host does not execute requests immediately, delays performed inside OpenOCD can be lost. This option allows the delays to be sent to the remote host so that they can be queued and executed in order. Signed-off-by: Jeremy Herbert <jeremy.006@gmail.com> Signed-off-by: David Ryskalczyk <david.rysk@gmail.com> Change-Id: Ie1b09e09ea132dd528139618e4305154819cbc9e Reviewed-on: https://review.openocd.org/c/openocd/+/7472 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-12-16doc/usb_adapters: add dumps of two versions of Atmel EDBGTomas Vanek2-0/+422
USB HS based CMSIS-DAP v1 (HID) adapters found on Atmel/Microchip Xplained Pro development boards. Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Change-Id: I62a4b656dc6dce27da386e906d87088befc2bcbf Reviewed-on: https://review.openocd.org/c/openocd/+/8038 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-12-10target: Increase maximum profile sample count to 1000000Karl Palsson1-1/+1
Change-Id: I38276dd1af011ce5781b0264b7cbb08c31a0a2ad Signed-off-by: Paul Reimer <paul@zaber.com> Signed-off-by: Karl Palsson <karlp@tweak.au> Reviewed-on: https://review.openocd.org/c/openocd/+/6099 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-12-06drivers/cmsis_dap: use quirk workarounds optionallyTomas Vanek1-0/+12
Introduce 'cmsis-dap quirk' command to enable and disable quirk mode. If enabled, disconnect and connect before a switch sequence and do not use multiple packets pipelining. Change-Id: I6576f7de9f6c98a25c3cf9eec9a456a23610d00d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/7966 Tested-by: jenkins
2023-12-03remote_bitbang: Add SWD supportManuel Wick2-11/+31
This adds new command characters to make SWD work with the new split jtag and swd operations of bitbang. The command characters are as follows: O - SWDIO drive 1 o - SWDIO drive 0 c - SWDIO read request d - SWD write 0 0 e - SWD write 0 1 f - SWD write 1 0 g - SWD write 1 1 Documentation has been updated accordingly. The new commands will be used by an adapted version of the jtag-openocd applet of the "Glasgow Debug Tool" (https://github.com/glasgowEmbedded/Glasgow). It has been tested against an stm32f103 and an at91samd21 target. contrib/remote/bitbang/remote_bitbang_sysfsgpio.c has also been adapted to support SWD via the new command set. Some limited testing has been done using a Raspberry Pi 2 with an stm32f103 and an at91samd21 target attached. Change-Id: I8e998a2cb36905142cb16e534483094cd99e8fa7 Signed-off-by: Manuel Wick <manuel@matronix.de> Signed-off-by: David Ryskalczyk <david.rysk@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6044 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-12-01target/target: Fix 'wp' command usageMarc Schink1-1/+1
While at it, fix the 'wp' command documentation. Change-Id: I70f3110e8ce286051f8f810260f1857b2285e634 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/8022 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
2023-11-24rtt_server: Add option for a message when client connectsThiemo van Engelen1-2/+3
This is useful when using the SEGGER RTT tooling, as the SEGGER RTT tool J-Link RTT Viewer version 7.84f requires that it receives a messages immediately after connecting. Otherwise it will give a timeout and it will not connect. Change-Id: I9240a1b6a93cd5c0fbd18292afb33b89013d78bf Signed-off-by: Thiemo van Engelen <tvanengelen@victronenergy.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7752 Tested-by: jenkins Reviewed-by: zapb <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-11-18jtag/drivers/kitprog: Restructure commandsMarc Schink1-3/+3
Use a command group 'kitprog' with subcommands instead of individual commands with 'kitprog_' prefix. The old command is still available to ensure backwards compatibility, but is marked as deprecated. Change-Id: I7f0d447939819ffc488a3d7a8de672b58887127f Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/7967 Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-11-18jtag/drivers/cmsis-dap: Restructure commandsMarc Schink1-5/+5
Use a command group 'cmsis-dap' with subcommands instead of individual commands with 'cmsis_dap_' prefix. The old commands are still available to ensure backwards compatibility, but are marked as deprecated. Change-Id: I75facb7572a86354c2ce6144aa7fadf3b5a6db4e Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/7963 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-11-18xtensa: update XDM register map for TRAX supportianst1-0/+6
- Include additional debug module registers - Add translation function for DM reg addr -> ID - Add DM read/write commands Signed-off-by: ianst <ianst@cadence.com> Change-Id: If95419d24a9f27a40fa695c8c15326cdfd127ef1 Reviewed-on: https://review.openocd.org/c/openocd/+/7973 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-11-18doc: xtensa architecture clarifications/fixesianst1-6/+13
- Fix Xtensa .cfg file references for NXP EVK - Add clarification note for "xtensa xtmem" command - Resolve TEX build warnings Signed-off-by: ianst <ianst@cadence.com> Change-Id: I0f2b56d0d084d86f557fadf3ac35fd04bf99650c Reviewed-on: https://review.openocd.org/c/openocd/+/7972 Tested-by: jenkins Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-11-11target: Add a debug_reason commandPeter Collingbourne1-0/+12
This allows programmatically determining the debug reason. Change-Id: I0c3e85cebb6dc28fc0fc212beca84a484ac654a5 Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7952 Reviewed-by: Jan Matyas <jan.matyas@codasip.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-10-14breakpoints: add rwp all commandMarek Vrbka1-2/+2
This patch adds the "all" option to the rwp command. It removes all watchpoints, much like rbp all removes all breakpoints. Change-Id: Id58dd103085e558f17afa4a287888cf085566ca9 Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7907 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-10-14command: Prepend logs during command captureMarek Vrbka1-1/+1
Previously, if you ran a tcl command in capture like so: "capture { reg 0x1000 hw }" Such command did overwrite the tcl result if LOG_LVL_INFO or lower was logged during it. This patch changes it by prepending the log to the tcl result instead. As the tcl results should not be lost during capture. Change-Id: I37381b45e15c931ba2844d65c9d38f6ed2f6e4fd Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7902 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
2023-09-23pld: harmonize refresh commandsDaniel Anselmi1-4/+8
add refresh command for lattice devices rename gowin reprogram to refresh rename virtex2 program to refresh Change-Id: I9da83a614b96da3e947ac4608b0a291b1d126914 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7839 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-09-23jtagspi/pld: add interface to get support from pld driversDaniel Anselmi1-13/+43
Jtagspi is using a proxy bitstream to "connect" JTAG to the SPI pins. This is not possible with all FPGA vendors/families. In this cases a dedicated procedure is needed to establish such a connection. This patch adds a jtagspi-mode for these cases. It also adds the needed interfaces to jtagspi and the pld-driver so the driver can select the mode and provide the necessary procedures. For the cases where a proxy bitstream is needed, the pld driver will select the mode and provide instruction code needed in this case. Change-Id: I9563f26739589157b39a3664a73d91152cd13f77 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7822 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-09-08flash/nor: add support for Nuvoton NPCX4/K3 series flashLuca Hung1-1/+7
Added NPCX flash driver to support the Nuvoton NPCX4/K3 series microcontrollers. Add config file for these series. Change-Id: I0b6e128fa51146b561f422e23a98260594b1f138 Signed-off-by: Luca Hung <YCHUNG0@nuvoton.com> Signed-off-by: Mulin CHao <mlchao@nuvoton.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7794 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-09-08doc/style: clarify default case for enumeratorsAntonio Borneo1-2/+2
Enumerator's case were not specified in the coding style. Add enumerators together with macros for upper-case preference. While there, add the word CamelCase beside the less common, but already used, MixedCaps. This could help linking this chapter to the output of checkpatch script. Change-Id: I6d4af06cc6f4bc46f525e99e9a74ecc167606c49 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7875 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2023-08-26contrib/firmware: add new i2c bit-banging feature to angie's firmwareAhmed BOUDJELIDA1-10/+49
add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-26jtag/drivers: dmem: Add Emulated AP modeJason Peck1-0/+13
This emulation mode supports software translation of an AP request into an address mapped transaction that does not rely on physical AP hardware. This is necessary in some hardware such as K3 SoCs since the hardware architecture anticipates a potential race condition between AP doing direct memory access generating transactions back to system bus and firewalls that data path out. This emulation mode allows direct memory driver to emulate CoreSight Access Port (AP) and reuse the SoC configuration meant for JTAG debuggers. Since the address ranges are flat in nature, the requisite memory base and size will need to be provided a-priori to the driver for mapping. The other design alternative would be to map requested memory map for every register operation, but, that would defeat our intent of getting max debug performance. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Peck <jpeck@ti.com> Change-Id: I2d3c5f7833f1973e90b4f6b247827f62fc2905d0 Reviewed-on: https://review.openocd.org/c/openocd/+/7089 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-26jtag/drivers: Add dmem driverNishanth Menon1-0/+60
Direct memory driver support for CoreSight Access Port(AP). Even though we emulate SWD (serial wire debug), we aren't actually using swd. Instead, we are using a direct memory access to get to the register set. This is similar in approach to other fast access native drivers such as am335xgpio drivers. Example operation on Texas Instrument's AM62x K3 SoC: +-----------+ | OpenOCD | SoC mem map | on |--------------+ | Cortex-A53| | +-----------+ | | +-----------+ +-----v-----+ |Cortex-M4F |<───────| | +-----------+ | | | DebugSS | +-----------+ | | |Cortex-M4F |<───────| | +-----------+ +-----------+ Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jason Peck <jpeck@ti.com> Change-Id: I8470cb15348863dd844b2c0e3f63a9063cb032c6 Reviewed-on: https://review.openocd.org/c/openocd/+/7088 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-12jtag/drivers: Add new driver for ANGIE USB-JTAG AdapterAhmed BOUDJELIDA1-0/+7
This is the driver code for NanoXplore's ANGIE USB-JTAG Adapter. The driver is based on the openULINK project. This driver communicate with ANGIE's firmware in order to establish JTAG protocol to debug the target chip. Since the ANGIE Adapter has a Spartan-6 FPGA in addition to the FX2 microcontroller, the driver adds two functions, one to download the firmware (embedded C) to the FX2, and the second to program the FPGA with its bitstream. Add ANGIE's configuration file to tcl/interface/ Add the device VID/PID to 60-openocd.rules file. Add ANGIE to OpenOCD's documentation Change-Id: Id17111c74073da01450d43d466e11b0cc086691f Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7702 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-08-12contrib/firmware: add new adapter ANGIE's firmware/bitstream codeAhmed BOUDJELIDA1-0/+68
This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-05doc: port "0" requests any available port for usage by OpenOCD serverParshintsev Anatoly1-0/+3
Change-Id: I0d38533748898516dce44e81d0bff6bd35ee4aec Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7842 Reviewed-by: Jan Matyas <jan.matyas@codasip.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-07-14doc:usb_adapters: add lsusb dump of STLINK-V3PWRAntonio Borneo2-0/+324
Add USB VID:PID 0483:3755 and 0483:3757. Change-Id: Iace29fa97f1b8e9d86078b9775561ca525635523 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7768 Tested-by: jenkins
2023-07-08jtag/stlink: add STLINK-V3PWR supportLaurent LEMELE1-1/+7
STLINK-V3PWR is both a standalone debugger probe compatible with STLINK-V3 and a source measurement unit (SMU). Link: http://www.st.com/stlink-v3pwr This code adds support for the debugger probe functionality. Change-Id: Ib056e55722528f922c5574bb6fbf77e2f2b2b0c1 Signed-off-by: Laurent LEMELE <laurent.lemele@st.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7755 Tested-by: jenkins
2023-07-08ipdbg/pld: ipdbg can get tap and hub/ir from pld driver.Daniel Anselmi1-5/+26
To start a ipdbg server one needs to know the tap and the instruction code to reach the IPDBG-Hub. This instruction is vendor/family specific. Knowledge which can be provided by the pld driver. Change-Id: I13eeb9fee895d65cd48544da4704fcc9b528b869 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7369 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-08pld/virtex2: add program/refresh commandDaniel Anselmi1-0/+4
Change-Id: If6d237a6f27c4232849f73d08e7ca74276e6d464 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7714 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-08pld/gowin: add missing documentationDaniel Anselmi1-0/+15
Add short description for gowin {read_status/read_user/reload} commands. Change-Id: Ib441f3a2c0f00346decdeb505c27afa2630e9b5d Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7736 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-07-08pld/xilinx: make instruction codes configurableDaniel Anselmi1-0/+17
Change-Id: I4d2c1fbd4d6007ba8d5c8c687a7c13e25fb6a474 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7713 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-08pld: give devices a name for referencing in scriptsDaniel Anselmi1-32/+34
Change-Id: I05e8596ffacdb6cd8da4dd8a40bb460183f4930a Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Reviewed-on: https://review.openocd.org/c/openocd/+/7728 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
generated by cgit v1.1 at 2024-10-12 14:32:32 +0000