aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29doc: replace example command "interface" with "adapter driver"Antonio Borneo1-4/+4
Keep documentation consisted after commands renaming. Change-Id: I97b43887cae9d7c224b07e4ba0b7d04915a19fc4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5285 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29jtag: adapter: rework adapter related commandsOleksij Rempel1-22/+23
currently we have different types of same command group: - starting with adapter_* - starting with interface* - without adapter or interface prefix. Since interface name is already used, we can only use "adapter" command group by keeping old commands as well. Change-Id: Id0a1cb63a2ea6860c67ae1e7a3a06a37ddf464f4 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4774 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-17jtag: drivers: xlnx-pcie-xvc: Add support for Xilinx XVC/PCIeMoritz Fischer1-0/+22
Add support for Xilinx Virtual Cable over PCIe JTAG controller. It is commonly used in Xilinx based PCI Express designs with JTAG IP in the FPGA fabric. Access to the JTAG registers happens via the PCI Express extended configuration space. This can be used to debug soft-cores instantiated in the FPGA fabric. The clang static checker doesn't find any new problems with this change. Change-Id: Ib12ede0d1f26dacfda808d5e05b947b640c5bde7 Signed-off-by: Moritz Fischer <moritzf@google.com> Reviewed-on: http://openocd.zylin.com/5314 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Marex Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-16flash/nor: add support of STM32WB on top STM32L4 flash driverTarek BOCHKATI1-2/+4
Change-Id: I9fb6700085d817d35a691f6484193f67939a4e0f Signed-off-by: Laurent LEMELE <laurent.lemele@st.com> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/4933 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-14stlink: add DAP direct driverAntonio Borneo1-6/+31
STLINK-V3 and the new firmware V2J24 for ST-LINK/V2 provide API to directly access the DAP registers. This mode permits to use the native target in cortex_m.c, with no need to override it with the target in hla_target.c. Other advantages wrt HLA are: support for Cortex-A cores, support for SoC multi-core and/or multi AP, support for OpenOCD commands "dap" thus including control of CSW. This obsoletes the existing HLA driver for ST-Link, that should anyway be kept for those cases where it's not possible to update the ST-Link firmware. This commit introduces the minimal implementation for direct DAP access. The implementation is much slower than the HLA because every memory transfer requires several USB packets. Further commits will close the performance gap. The whole ST-Link driver is compiled under BUILD_HLADAPTER, to remove the need to split the driver between the two modes. This has to be reworked, but it's quite invasive! A new interface file stlink-dap.cfg is added and should be used in place of stlink.cfg to enable the DAP mode. Documentation is updated and reports limitation on the maximum AP number that can be accessed by ST-Link for some firmware already tested. Change-Id: I932ffe16bc81d00b1fe489e2944fda13470cce9b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4904 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-02jtag: replace command "jtag_reset" with "adapter [de]assert"Antonio Borneo1-26/+35
Replace the JTAG transport specific command with a more generic one. Deprecate "jtag_reset" and update the documentation. While there, fix an error in the documentation, where the command "jtag_reset" was used in place of command "reset_config". Change-Id: I41a988d37ce69f7b35a960cbaf5306aab0299b99 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5286 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-01-02target/arm_cti: add new 'ack' and 'channel' commandsTarek BOCHKATI1-0/+9
these commands have been introduced to ease the manipulation of CTI trough script files, these commands are: - $cti_name ack $event : to acknowledge a CTI event - $cti_name channel $channel_number $operation: to perform an operation on a specific channel, the possible operations are: gate, ungate, set, clear and pulse Change-Id: I35463867a3c85072f3776c3aeb1e5788953ec435 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5315 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2019-11-27flash/nor/stm32h7x: remove options cache and some driver enhancementsTarek BOCHKATI1-0/+31
functions managing option bytes cache (stm32x_read/write_options) have bee removed, and a new functions to modify a single option byte have been introduced (stm32x_write/modify_option). by the way, some helpers have been introduced to access flash registers: - stm32x_read_flash_reg(bank, offset, *value): int - stm32x_write_flash_reg(bank, offset, value): int and a new commands to read and write a single flash option register: - stm32h7x option_read <bank> <option_reg offset> - stm32h7x option_write <bank> <option_reg offset> <value> [mask] also lock and unlock handlers' have been reduced by using the same routine (stm32x_set_rdp) and have been optimized to not write options unless there is a change in RDP level. finally, several functions have been fixed to lock flash / options in case of failure. Change-Id: I75057949ab9f5b4e0f602bafb76f9f80d53a522b Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5293 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-11-26flash/nor/nrf5: detect newer devices without HWID tableTomas Vanek1-0/+4
nrf5 flash driver detected devices by looking up the HWID in the table of known devices. Unfortunately chips are produced with many different HWIDs for each type. All nRF52 devices have FICR INFO field suitable for device identification without need of HWID lookup. Some newer nRF51 devices have FICR INFO too although undocumented. Use this information to identify the device. nrf5_info() is reworked to show just concise info. Decoding FICR and UICR registers was moved from nrf5_info() to a new command 'nrf5 info' without functional changes. The flash bank for UICR page has the same size as program flash sector. Change-Id: I900095b9ae23ee995f8e2bef8539b75d00300da5 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4848 Tested-by: jenkins
2019-10-15src/flash/startup.tcl: Add preverify to program commandMoritz 'Morty' Strübe1-1/+2
The preverify option allows to check whether flashing is necessary. If the target is flashed often/automatically this can save time and preserve the flash. This is expecially helpful in CI environments. Change-Id: Iead0a269e1a772b751d4dd9e8b53b2fecc874624 Signed-off-by: Moritz 'Morty' Strübe <moritz.struebe@redheads.de> Reviewed-on: http://openocd.zylin.com/5292 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2019-10-15doc: emphasize the role of 'reset init' before flash commandsTomas Vanek1-1/+15
Change-Id: I4a4061ad0fa6e5dfb1e33f01d62145ca9bf12148 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/5304 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-09-08flash/nor: flash driver for Synwit SWM050 MCUsCaleb Szalacinski1-0/+17
SWM050 is a series of MCU product by Foshan Synwit Tech, which is available in TSSOP-8 or SSOP-16 packages. Adds flash driver for the internal 8KiB flash of the MCU. The registers are based on reverse engineering the J-Flash blob provided by the vendor. Also adds a pre-made cfg file. Change-Id: I0b29f0c0d062883542ee743e0750a4c6b6609ebd Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Caleb Szalacinski <contact@skiboy.net> Reviewed-on: http://openocd.zylin.com/4927 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2019-07-28mflash: Remove this broken flash driverAndreas Fritiofson1-61/+0
This is causing repeated build failures. Its design is so fundamentally broken that if someone actually wants to use it, a full rewrite is the only option. So it's not even worth deprecating in the hope that someone will notice and fix it, just get rid of it. Change-Id: I513069919a3873bd69253110f7fb6f622ee7d061 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/5243 Tested-by: jenkins Reviewed-by: Jeffrey Booher-Kaeding <Jeff.Booher-Kaeding@arm.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2019-06-20doc: makeinfo extra whitespaceKevin Gillespie1-1/+1
Extra whitespace in file creating build errors with makeinfo. Change-Id: Ib764850c1c8ff596d3c753eadd8e27f8c5982d20 Signed-off-by: Kevin Gillespie <kgills@gmail.com> Reviewed-on: http://openocd.zylin.com/5229 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-05-22doc/openocd.texi: fix bad aarch64 mergeSteven Stallion1-9/+9
The documentation added for commit b3d29cb5441ee5d38e8f7b561a58f03eb269dbe4 was merged after the end of the eSi-RISC section rather than AARCH64. This patch relocates this hunk to the correct location. Change-Id: I46a2d24442556e9e8000b46a5e1af03b83de6d98 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/5181 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-05-16Fix 'adapter usb location' documentationMarc Schink1-2/+2
Change-Id: Ifd1d21f2a3cc25ee25e3c7dd04dbb8190d41a1ea Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/5156 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-05-14doc: remove references to "ocd_" prefixed commandsAntonio Borneo1-14/+6
The commands prefixed with "ocd_" are removed. Remove any reference in the documentation. Change-Id: I27cebaa4752752ec8700757bf1c98b267c24f15b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5088 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2019-05-14helper/command: change prototype of command_print/command_print_samelineAntonio Borneo1-1/+1
To prepare for handling TCL return values consistently, all calls to command_print/command_print_sameline should switch to CMD as first parameter. Change prototype of command_print() and command_print_sameline() to pass CMD instead of CMD_CTX. Since the first parameter is currently not used, the change can be done though scripts without manual coding. This patch is created using the command: sed -i PATTERN $(find src/ doc/ -type f) with all the following patters: 's/\(command_print(cmd\)->ctx,/\1,/' 's/\(command_print(CMD\)_CTX,/\1,/' 's/\(command_print(struct command_\)context \*context,/\1invocation *cmd,/' 's/\(command_print_sameline(cmd\)->ctx,/\1,/' 's/\(command_print_sameline(CMD\)_CTX,/\1,/' 's/\(command_print_sameline(struct command_\)context \*context,/\1invocation *cmd,/' This change is inspired by http://openocd.zylin.com/1815 from Paul Fertser but is now done through scripting. Change-Id: I3386d8f96cdc477e7a2308dd18269de3bed04385 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/5081 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-05-14target: unify memory read/write commandsAntonio Borneo1-13/+29
Current code provides two independent implementations for the memory read/write commands: a) jim_target_md()/jim_target_mw() for the target specific commands "<target> m[dw][bhw]" b) handle_md_command()/handle_mw_command() for the current target commands "m[dw][bhwd]" The case a) misses the handling of doubleword and calls functions command_print_sameline() with first parameter NULL because defined as jim handler. Remove the code in jim_target_md()/jim_target_mw() and use the same code in b) for the target specific memory read/write. This approach also provides support for 64-bit data size, not present in the implementation in a). The only drawback is that the implementation of memory read in b) prints the data also as human readable ASCII characters, feature missing in the implementation in a). This could introduced later if it's really needed. Update the documentation to: - add 64-bit support - add phys parameter - add the count parameter Add attribute "unused" to target_buffer_get_u8(), now not used anymore. Change-Id: Ib11ff924c409ad87e77fe708d628b2cc82b74d6a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5050 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-04-24doc/openocd.texi: fix cross referencingAntonio Borneo1-1/+1
Commit b04c7c2ca587feebd6506716cd84297212350608 adds the cross reference target "adapter_usb_location", but references it with the command @xref inside a text, where command @ref should be used. This triggers a compile warning: doc/openocd.texi:2517: warning: `.' or `,' must follow @xref, not c Replace @xref with @ref and adapt both the text and the command syntax. Change-Id: I1520ffecb7d1d375f924492b1884d5b47f399007 Fixes: b04c7c2ca587 ("ftdi: use "adapter usb location" instead of ftdi_location command") Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5045 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10target/cortex_m: Implement maskisr steponly optionChristopher Head1-1/+6
`maskisr steponly` disables interrupts during single-stepping but enables them during normal execution. This can be used as a partial workaround for 702596 erratum in Cortex-M7 r0p1. See "Cortex-M7 (AT610) and Cortex-M7 with FPU (AT611) Software Developer Errata Notice" from ARM for further details. Change-Id: I797a14e4d43f6dcb3706528ee4ab452846ebf133 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4673 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2019-04-10jtag: tcl: Add cget -idcodeLeonard Crestez1-1/+5
This can be used to dynamically distinguish between similar chips in tcl code. Change-Id: Ic4dfb61693e78616355173142dc7f9b9683a9f73 Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5033 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10Fix incorrect commas in URLsChristopher Head1-3/+3
In Texinfo, a comma inside an @url separates parameters to the @url function rather than being included as part of a parameter. Use @comma{} instead to resolve this. Change-Id: I8b38939462cf4452e5bc2582ee484220aaf83ae0 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5028 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-10Document the mem_ap target typeChristopher Head1-0/+1
Change-Id: I56e971b38f20db8c4ad0cdee5cc42b42a25319ea Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5029 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-03-27smp: replace commands smp_on/smp_off with "smp [on|off]"Antonio Borneo1-10/+7
Seams over-engineered having two separate commands to turn SMP on/off. Plus it is missing the possibility to dump the current status of SMP and would be weird adding an additional command for it. Moreover, such commands are replicated in few targets so it would make sense centralizing them. - Deprecate the commands "smp_on" and "smp_off". - Add a new command "smp" that accepts optional parameters "[on|off]" and prints the SMP status when run without parameters. This replaces the two commands above. - Put the deprecated and the new command handlers in smp.c - Update the documentation, except for mips_m4k, since it is not available yet. - Promote the macro foreach_smp_target to global context and use it where possible. Change-Id: Ia72841c1a3bd6edd4db4cc809046322f498617e6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4615 Tested-by: jenkins Reviewed-by: Graham Sanderson <graham.sanderson@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-03-27Lots of RISC-V improvements.Tim Newsome1-0/+19
This represents months of continuing RISC-V work, with too many changes to list individually. Some improvements: * Fixed memory leaks. * Better handling of dbus timeouts. * Add `riscv expose_custom` command. * Somewhat deal with cache coherency. * Deal with more timeouts during block memory accesses. * Basic debug compliance test. * Tell gdb which watchpoint hit. * SMP support for use with -rtos hwthread * Add `riscv set_ir` Change-Id: Ica507ee2a57eaf51b578ab1d9b7de71512fdf47f Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/4922 Tested-by: jenkins Reviewed-by: Philipp Guehring <pg@futureware.at> Reviewed-by: Liviu Ionescu <ilg@livius.net> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-03-08rtos/hwthread: add hardware-thread pseudo rtosMatthias Welwarsky1-51/+67
This patch adds "hwthread", a pseudo rtos that represents cpu cores in an SMP system as threads to gdb. This allows to debug SMP system kernels in a more sensible manner and removes the current atrocities of switching gdb manually between CPU cores to update the context. Change-Id: Ib781c6c34097689d21d9e02011e4d74a4a742379 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3999 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Graham Sanderson <graham.sanderson@gmail.com>
2019-03-04armv8: allow halt on exceptionMatthias Welwarsky1-0/+8
add command 'catch_exc' to halt a core on entering any of Secure EL1 or EL3 or Non-Secure EL1 or EL2. Change-Id: I0c68e247af68dd96616855a9bc1063c277d222e5 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4479 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-02-27flash: stm32f2/f4/f7: Add One-Time-Porgrammable (OTP) supportMoritz Fischer1-0/+11
The OTP is part of the flash memory. It has 512 (1024 for F7) bytes and is organized in 16 sectors with 32 (64 for F7) bytes each. The OTP is exposed as separate flash bank 1 and can be used with the usual flash commands. Writing the OTP can be done as follows: > stm32f2x otp 1 enable > flash write bank 1 foo.bin 0 > mdw 0x1fff7800 4 > verify_image foo.bin 0x1fff7800 > stm32f2x otp 1 disable Note: This patch is largely a rebase/cleanup of a patch from 2012 by Laurent Charpentier and he did most of the work. No new Clang-Analyzer warnings. Change-Id: I5e6371f6a7c7a9929c1d7907d6ba4724f9d20d97 Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-on: http://openocd.zylin.com/829 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-02-19ftdi: use "adapter usb location" instead of ftdi_location commandOleksij Rempel1-1/+5
Use unified "adapter usb location" instead of driver specific command. Change-Id: I568a76b87d09cea0f40f1580cf81f7c51402f6f1 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4771 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-02-14doc: fix typo in "adapter usb location" commandOleksij Rempel1-1/+1
Change-Id: If959c5461904cdf4bcdf1887a9afaa9c2c94282b Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4907 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-02-14doc/openocd.texi: fix xref warningTomas Vanek1-1/+1
Xref without trailing '.' or ',' was introduced in deaf3d264123391d8fe5c4cccbf8fb8852e1be23 Change-Id: I99afd40e1ffeddd1298b7b07e4deba3dcc41799f Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4905 Tested-by: jenkins
2019-02-07doc: add documentation for "adapter usb location" commandOleksij Rempel1-0/+10
Change-Id: Ia3fbe0c3894b1b96464bbfda5d4101123827b761 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4769 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-02-07flash/nor/stm32f1x: Ability to change user option bytes.Jan Vojtech1-1/+2
Adds ability to change the user data in STM32F1x/STM32F3x MCU's option byte. Since OpenOCD prints the content of user data in option byte registers, it is seems logical to also provide a way how to change this data. Change-Id: Ie6cb756b4f11b5c6dabd34bc89434a358eb758ff Signed-off-by: Jan Vojtech <honza.vojtech@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4663 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2019-02-05flash/nor: flash driver and cfg for SAM E54, E53, E51 and D51Tomas Vanek1-3/+73
The new Microchip (former Atmel) series powered by Cortex-M4 looks very similar to older M0+ powered SAM D2x at the first sight. Unfortunately the new series differs a lot in important details. NVMCTRL has different register addresses, moved important bits and even changed binary command set. An universal driver for all SAM D/E would be very complicated. That's why a new driver was derived. Tested on Microchip SAM E54 Xplained Pro kit (board cfg included). Adjusted for the restructured dap support. Checked by valgrind and clang static analyzer. Change-Id: I26c67047a552076f4b207b9b89285a53d69b4ca4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4272 Tested-by: jenkins Reviewed-by: Andres Vahter <andres.vahter@gmail.com>
2019-01-11Add flash support for SiFive's Freedom E platformsTim Newsome1-0/+11
Valgrind and Clang Static Analyzer have no complaints about this change. Change-Id: I7757615ec52448372bdc57729cdf97c7016d97e8 Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/4656 Tested-by: jenkins Reviewed-by: Philipp Guehring <pg@futureware.at> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-08drivers: xds110: Add support for XDS110 stand-alone probeEdward Fewell1-0/+6
The XDS110 stand-alone version has the ability to supply voltage to the target board via it's AUX FUNCTIONS port. Added command to enable setting the voltage on the XDS110 stand-alone. Change-Id: I2f21c4a3d15ed99e649f3a83973c5e724c4bfeb6 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4793 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2019-01-02NOR: lpc2000 Add support for LPC84x devicesRod Boyce1-1/+3
These devices differ from LPC8xx devices in that they have a different IAP entry point, but everything else is the same. Using Tcl to pass different IAP entry point. no new Clang analyser warnings and no new build sanitizers issues. Change-Id: I2d654dd250f416e74262c0228cad8713a283402f Signed-off-by: Rod Boyce <developer@teamboyce.co.uk> Reviewed-on: http://openocd.zylin.com/4684 Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-02flash: nor: ath79: remove base calculationOleksij Rempel1-2/+2
Currently it is impossible to flash ELF with correct offsets. The reason is a bogus offset calculation extracted from base. Since any other spi drivers do not care about base, do the same for ath79 as well. Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4821 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-23Add LPC8Nxx and NHS3xx support.Jean-Christian de Rivaz1-3/+3
Change-Id: I0bdbca8dd9b234aca355230af7269463c9f70bd1 Signed-off-by: Jean-Christian de Rivaz <jcamdr70@gmail.com> Reviewed-on: http://openocd.zylin.com/4515 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-21add w600 supportSimon Qian1-0/+11
w600 is a wifi soc from winner micro(www.winnermicro.com). Change-Id: Ib8ccd6e52baefca6547fb97d29db75db0ee73948 Signed-off-by: Simon Qian <versaloon@simonqian.com> Reviewed-on: http://openocd.zylin.com/4801 Tested-by: jenkins Reviewed-by: yichen <wdyichen@wdyichen.cn> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-19target/cortex_m: fix cortex_m reset_config help and check for syntax errorTomas Vanek1-6/+7
Remove option 'srst' which is not recognized from on-line help and texi. Check parameter and return syntax error if wrong option is entered. Change-Id: I87daa423a9f53193a0b015080594820b933628f5 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4795 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-12-19target/cortex_m: do not use VECTRESET on Cortex-M0, M0+ and M1Tomas Vanek1-3/+7
Cortex-M0, M0+ and M1 do not support VECTRESET bit in AIRCR. Without this change the 'reset' command silently fails if VECTRESET is requested. Detect these cores, show warning if VECTRESET is about to use and use SYSRESETREQ instead. Change-Id: Ief174373e3ef0e6b287c57911c0aca4dfa8209f2 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4794 Tested-by: jenkins Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-12-12esirisc: support eSi-TraceSteven Stallion1-12/+167
This patch adds support for instruction tracing to eSi-RISC targets. The command interface is borrowed heavily from ETM; eSi-Trace uses a less sophisticated model for tracing, however the setup and usage is similar. This patch also cleans up the command interfaces of the other esirisc command groups and adds additional debugging information to log messages when dealing with CSRs. This patch "finalizes" support for 32-bit eSi-RISC targets. Change-Id: Ia2a9de79a3c7c066240b5212721fb1b7584a9a45 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4780 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-11flash/nor: update CC26xx/CC13xx supportEdward Fewell1-1/+1
Added fixes found in additional code reviews. Remove inappropriate use of bank_number field and updated documentation to reflect the change. Restored functionality to cc2538.cfg file because previous change removed the cc26xx.cfg file because the flash support changes made it obsolete. Rolled the previous cc26xx.cfg file into cc2538.cfg and updated it to work with other recent changes. Tested using a SmartRF06 Evaluation board with embedded XDS100v3 and external XDs110. Change-Id: Ia19d00cf8055c5c0f1acc53aa23fd06a80fd2ebc Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4787 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-06doc: add ARMv6-M info regarding TAP DeclarationSpencer Oliver1-3/+3
Change-Id: I89095fd0c830fdc2ce40e5d23f8af98502b0ff50 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/4782 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2018-12-06doc: fix some typo about STMicroelectronics nameAntonio Borneo1-12/+12
s/ST/STMicroelectronics/ s/ST Micro/STMicroelectronics/ s/ST Microelectronics/STMicroelectronics/ Change-Id: I62aef331d172db22a70841a089c1889e37997cde Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4718 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-12-06stlink: add support for STLINK-V3Antonio Borneo1-0/+3
Extend the driver to include the minimal functionality to support the HLA model. Due to the small change in the name (ST-LINK/V2 => STLINK-V3), fix the existing names in the comments in udev rules. Change-Id: Ied33e38063a6da81d9bf249ed195444d7cdf4f03 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4717 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-12-06jtag: drivers: ft232r: unhardcodedEMARD1-3/+66
FT232R: introducing configurable parameters for pinout, initial buffer size, state of RS232 signals at exit with option to reattach kernel driver. All this was hardcoded before. New parameters are documented in "openocd.texi" file. Allows hopfully self-explainable and user-friendly adaptation to various pinouts and similar chips like FT230X and FT231X. Change-Id: Ib807f2ea3d4c1a164d351d65aeacd1978318d217 Signed-off-by: EMARD <vordah@gmail.com> Reviewed-on: http://openocd.zylin.com/4681 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-11-08armv7a: ARMv7-A MMU toolsMatthias Welwarsky1-0/+6
factor out mmu-related code from armv7a.c, add a 'dump' command for page tables. Change-Id: Ic1ac3c645d7fd097e9d625c7c8302e7065875dd4 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4327 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
generated by cgit v1.1 at 2024-10-31 20:15:41 +0000