diff options
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/target/stm32f4x.cfg | 36 | ||||
-rw-r--r-- | tcl/target/stm32h7x.cfg | 19 | ||||
-rw-r--r-- | tcl/target/stm32mp15x.cfg | 11 |
3 files changed, 54 insertions, 12 deletions
diff --git a/tcl/target/stm32f4x.cfg b/tcl/target/stm32f4x.cfg index 1587533..e94837f 100644 --- a/tcl/target/stm32f4x.cfg +++ b/tcl/target/stm32f4x.cfg @@ -38,6 +38,8 @@ if { [info exists CPUTAPID] } { swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu +tpiu create $_CHIPNAME.tpiu -dap stm32f4x.dap -ap-num 0 -baseaddr 0xE0040000 + if {[using_jtag]} { jtag newtap $_CHIPNAME bs -irlen 5 } @@ -89,13 +91,37 @@ $_TARGETNAME configure -event examine-end { mmw 0xE0042008 0x00001800 0 } -$_TARGETNAME configure -event trace-config { - # Set TRACE_IOEN; TRACE_MODE is set to async; when using sync - # change this value accordingly to configure trace pins - # assignment - mmw 0xE0042004 0x00000020 0 +proc proc_post_enable {_chipname} { + targets $_chipname.cpu + + if { [$_chipname.tpiu cget -protocol] eq "sync" } { + switch [$_chipname.tpiu cget -port-width] { + 1 { + mmw 0xE0042004 0x00000060 0x000000c0 + mmw 0x40021020 0x00000000 0x0000ff00 + mmw 0x40021000 0x000000a0 0x000000f0 + mmw 0x40021008 0x000000f0 0x00000000 + } + 2 { + mmw 0xE0042004 0x000000a0 0x000000c0 + mmw 0x40021020 0x00000000 0x000fff00 + mmw 0x40021000 0x000002a0 0x000003f0 + mmw 0x40021008 0x000003f0 0x00000000 + } + 4 { + mmw 0xE0042004 0x000000e0 0x000000c0 + mmw 0x40021020 0x00000000 0x0fffff00 + mmw 0x40021000 0x00002aa0 0x00003ff0 + mmw 0x40021008 0x00003ff0 0x00000000 + } + } + } else { + mmw 0xE0042004 0x00000020 0x000000c0 + } } +$_CHIPNAME.tpiu configure -event post-enable "proc_post_enable $_CHIPNAME" + $_TARGETNAME configure -event reset-init { # Configure PLL to boost clock to HSI x 4 (64 MHz) mww 0x40023804 0x08012008 ;# RCC_PLLCFGR 16 Mhz /8 (M) * 128 (N) /4(P) diff --git a/tcl/target/stm32h7x.cfg b/tcl/target/stm32h7x.cfg index 8258e50..26d0d93 100644 --- a/tcl/target/stm32h7x.cfg +++ b/tcl/target/stm32h7x.cfg @@ -77,6 +77,8 @@ if {![using_hla]} { # STM32H7 provides an APB-AP at access port 2, which allows the access to # the debug and trace features on the system APB System Debug Bus (APB-D). target create $_CHIPNAME.ap2 mem_ap -dap $_CHIPNAME.dap -ap-num 2 + swo create $_CHIPNAME.swo -dap $_CHIPNAME.dap -ap-num 2 -baseaddr 0xE00E3000 + tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 2 -baseaddr 0xE00F5000 } target create $_CHIPNAME.cpu0 cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap -ap-num 0 @@ -178,13 +180,20 @@ $_CHIPNAME.cpu0 configure -event examine-end { stm32h7x_dbgmcu_mmw 0x03C 0x00000800 0 # DBGMCU_APB4FZ1 |= WDGLSD1 | WDGLSD2 stm32h7x_dbgmcu_mmw 0x054 0x000C0000 0 -} -$_CHIPNAME.cpu0 configure -event trace-config { - # Set TRACECLKEN; TRACE_MODE is set to async; when using sync - # change this value accordingly to configure trace pins - # assignment + # Enable clock for tracing + # DBGMCU_CR |= TRACECLKEN stm32h7x_dbgmcu_mmw 0x004 0x00100000 0 + + # RM0399 (id 0x450) M7+M4 with SWO Funnel + # RM0433 (id 0x450) M7 with SWO Funnel + # RM0455 (id 0x480) M7 without SWO Funnel + # RM0468 (id 0x483) M7 without SWO Funnel + # Enable CM7 and CM4 slave ports in SWO trace Funnel + # Works ok also on devices single core and without SWO funnel + # Hack, use stm32h7x_dbgmcu_mmw with big offset to control SWTF + # SWTF_CTRL |= ENS0 | ENS1 + stm32h7x_dbgmcu_mmw 0x3000 0x00000003 0 } $_CHIPNAME.cpu0 configure -event reset-init { diff --git a/tcl/target/stm32mp15x.cfg b/tcl/target/stm32mp15x.cfg index 4a8bc86..1b2ae7d 100644 --- a/tcl/target/stm32mp15x.cfg +++ b/tcl/target/stm32mp15x.cfg @@ -64,6 +64,9 @@ cti create $_CHIPNAME.cti.cpu0 -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE00D800 cti create $_CHIPNAME.cti.cpu1 -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE00D9000 cti create $_CHIPNAME.cti.cm4 -dap $_CHIPNAME.dap -ap-num 2 -baseaddr 0xE0043000 +swo create $_CHIPNAME.swo -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE0083000 +tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE0093000 + # interface does not work while srst is asserted # this is target specific, valid for every board # Errata "2.3.5 Incorrect reset of glitch-free kernel clock switch" requires @@ -108,9 +111,13 @@ proc detect_cpu1 {} { if {! $dual_core} {$::_CHIPNAME.cpu1 configure -defer-examine} } +proc rcc_enable_traceclk {} { + $::_CHIPNAME.ap2 mww 0x5000080c 0x301 +} + # FIXME: most of handler below will be removed once reset framework get merged $_CHIPNAME.ap1 configure -event reset-deassert-pre {adapter deassert srst deassert trst;dap init;catch {$::_CHIPNAME.dap apid 1}} -$_CHIPNAME.ap2 configure -event reset-deassert-pre {dbgmcu_enable_debug} +$_CHIPNAME.ap2 configure -event reset-deassert-pre {dbgmcu_enable_debug;rcc_enable_traceclk} $_CHIPNAME.cpu0 configure -event reset-deassert-pre {$::_CHIPNAME.cpu0 arp_examine} $_CHIPNAME.cpu1 configure -event reset-deassert-pre {$::_CHIPNAME.cpu1 arp_examine allow-defer} $_CHIPNAME.cpu0 configure -event reset-deassert-post {toggle_cpu0_dbg_claim0} @@ -118,4 +125,4 @@ $_CHIPNAME.cm4 configure -event reset-deassert-post {$::_CHIPNAME.cm4 arp_exami $_CHIPNAME.ap1 configure -event examine-start {dap init} $_CHIPNAME.ap2 configure -event examine-start {dbgmcu_enable_debug} $_CHIPNAME.cpu0 configure -event examine-end {detect_cpu1} -$_CHIPNAME.ap2 configure -event examine-end {$::_CHIPNAME.cm4 arp_examine} +$_CHIPNAME.ap2 configure -event examine-end {rcc_enable_traceclk;$::_CHIPNAME.cm4 arp_examine} |