diff options
Diffstat (limited to 'tcl/interface')
| -rw-r--r-- | tcl/interface/angie.cfg | 9 | ||||
| -rw-r--r-- | tcl/interface/ftdi/sipeed-rv-debugger.cfg | 13 | ||||
| -rw-r--r-- | tcl/interface/stlink-dap.cfg | 2 | ||||
| -rw-r--r-- | tcl/interface/stlink.cfg | 2 |
4 files changed, 24 insertions, 2 deletions
diff --git a/tcl/interface/angie.cfg b/tcl/interface/angie.cfg new file mode 100644 index 0000000..26cbe39 --- /dev/null +++ b/tcl/interface/angie.cfg @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright (C) 2023 by NanoXplore, France - all rights reserved +# +# configuration file for ANGIE Adapter from NanoXplore. +# + +adapter driver angie +adapter speed 10000 +reset_config trst_and_srst trst_push_pull srst_open_drain diff --git a/tcl/interface/ftdi/sipeed-rv-debugger.cfg b/tcl/interface/ftdi/sipeed-rv-debugger.cfg new file mode 100644 index 0000000..ca65398 --- /dev/null +++ b/tcl/interface/ftdi/sipeed-rv-debugger.cfg @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +# +# Interface file for BL702-based SIPEED RV Debugger +# + +adapter driver ftdi +adapter speed 6000 + +ftdi device_desc "JTAG Debugger" +ftdi vid_pid 0x0403 0x6010 +ftdi layout_init 0x0008 0x001b +ftdi layout_signal nSRST -oe 0x0020 -data 0x0020 diff --git a/tcl/interface/stlink-dap.cfg b/tcl/interface/stlink-dap.cfg index 5c24cbd..99c81c1 100644 --- a/tcl/interface/stlink-dap.cfg +++ b/tcl/interface/stlink-dap.cfg @@ -11,7 +11,7 @@ # adapter driver st-link -st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 +st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757 # transport select dapdirect_jtag # transport select dapdirect_swd diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg index e4906b7..8578bf2 100644 --- a/tcl/interface/stlink.cfg +++ b/tcl/interface/stlink.cfg @@ -8,7 +8,7 @@ adapter driver hla hla_layout stlink hla_device_desc "ST-LINK" -hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 +hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757 # Optionally specify the serial number of ST-LINK/V2 usb device. ST-LINK/V2 # devices seem to have serial numbers with unreadable characters. ST-LINK/V2 |