13 files changed, 125 insertions, 61 deletions
diff --git a/tcl/interface/ftdi/sipeed-usb-jtag-debugger.cfg b/tcl/interface/ftdi/sipeed-usb-jtag-debugger.cfg
new file mode 100644
index 0000000..8a804ec
--- /dev/null
+++ b/tcl/interface/ftdi/sipeed-usb-jtag-debugger.cfg
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Sipeed USB-JTAG/TTL RISC-V Debugger
+#
+# https://www.seeedstudio.com/Sipeed-USB-JTAG-TTL-RISC-V-Debugger-p-2910.html
+#
+
+adapter driver ftdi
+ftdi device_desc "Dual RS232"
+ftdi vid_pid 0x0403 0x6010
+ftdi channel 0
+
+# Every pin set as high impedance except TCK, TDI, TDO, TMS and RST
+ftdi layout_init 0x0028 0x002b
+
+transport select jtag
+
+# nSRST defined on pin RST of the Debugger (pin ADBUS5 [AD5] on the FT2232D chip)
+ftdi layout_signal nSRST -data 0x0020 -oe 0x0020
diff --git a/tcl/interface/nulink.cfg b/tcl/interface/nulink.cfg
index 2a4bc0b..48dc20e 100644
--- a/tcl/interface/nulink.cfg
+++ b/tcl/interface/nulink.cfg
@@ -5,9 +5,9 @@
 #
 
 adapter driver hla
-hla_layout nulink
-hla_device_desc "Nu-Link"
-hla_vid_pid 0x0416 0x511b 0x0416 0x511c 0x0416 0x511d 0x0416 0x5200 0x0416 0x5201
+hla layout nulink
+hla device_desc "Nu-Link"
+hla vid_pid 0x0416 0x511b 0x0416 0x511c 0x0416 0x511d 0x0416 0x5200 0x0416 0x5201
 
 # Only swd is supported
 transport select hla_swd
diff --git a/tcl/interface/parport.cfg b/tcl/interface/parport.cfg
index b9fceeb..8fb1c14 100644
--- a/tcl/interface/parport.cfg
+++ b/tcl/interface/parport.cfg
@@ -5,17 +5,6 @@
 #
 # Addresses: 0x378/LPT1 or 0x278/LPT2 ...
 #
+echo "DEPRECATED: use interface/parport/wiggler.cfg instead of deprecated interface/parport.cfg"
 
-if { [info exists PARPORTADDR] } {
-   set _PARPORTADDR $PARPORTADDR
-} else {
-   if {$tcl_platform(platform) eq "windows"} {
-      set _PARPORTADDR 0x378
-   } {
-      set _PARPORTADDR 0
-   }
-}
-
-adapter driver parport
-parport port $_PARPORTADDR
-parport cable wiggler
+source [find interface/parport/wiggler.cfg]
diff --git a/tcl/interface/parport/dlc5.cfg b/tcl/interface/parport/dlc5.cfg
new file mode 100644
index 0000000..24acea7
--- /dev/null
+++ b/tcl/interface/parport/dlc5.cfg
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Xilinx Parallel Cable III 'DLC 5' (and various clones)
+#
+# http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html
+#
+
+if { [info exists PARPORTADDR] } {
+   set _PARPORTADDR $PARPORTADDR
+} else {
+   set _PARPORTADDR 0
+}
+
+adapter driver parport
+parport port $_PARPORTADDR
+parport cable dlc5
diff --git a/tcl/interface/parport/wiggler.cfg b/tcl/interface/parport/wiggler.cfg
new file mode 100644
index 0000000..b9fceeb
--- /dev/null
+++ b/tcl/interface/parport/wiggler.cfg
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Parallel port wiggler (many clones available) on port 0x378
+#
+# Addresses: 0x378/LPT1 or 0x278/LPT2 ...
+#
+
+if { [info exists PARPORTADDR] } {
+   set _PARPORTADDR $PARPORTADDR
+} else {
+   if {$tcl_platform(platform) eq "windows"} {
+      set _PARPORTADDR 0x378
+   } {
+      set _PARPORTADDR 0
+   }
+}
+
+adapter driver parport
+parport port $_PARPORTADDR
+parport cable wiggler
diff --git a/tcl/interface/parport_dlc5.cfg b/tcl/interface/parport_dlc5.cfg
index 24acea7..83f3b56 100644
--- a/tcl/interface/parport_dlc5.cfg
+++ b/tcl/interface/parport_dlc5.cfg
@@ -5,13 +5,6 @@
 #
 # http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html
 #
+echo "DEPRECATED: use interface/parport/dlc5.cfg instead of deprecated interface/parport_dlc5.cfg"
 
-if { [info exists PARPORTADDR] } {
-   set _PARPORTADDR $PARPORTADDR
-} else {
-   set _PARPORTADDR 0
-}
-
-adapter driver parport
-parport port $_PARPORTADDR
-parport cable dlc5
+source [find interface/parport/dlc5.cfg]
diff --git a/tcl/interface/raspberrypi5-gpiod.cfg b/tcl/interface/raspberrypi5-gpiod.cfg
index f3fdde0..03f3fdb 100644
--- a/tcl/interface/raspberrypi5-gpiod.cfg
+++ b/tcl/interface/raspberrypi5-gpiod.cfg
@@ -18,12 +18,19 @@ proc read_file { name } {
 	return $result
 }
 
+proc find_rp1_alias {} {
+	foreach f [glob -directory "/proc/device-tree/aliases" "gpio\[0-9\]"] {
+		if {[string match "*/rp1/*" [read_file $f]]} {
+			return $f
+		}
+	}
+}
+
 set pcie_aspm [read_file /sys/module/pcie_aspm/parameters/policy]
-# escaping [ ] characters in string match pattern does not work in Jim-Tcl
-if {![string match "*<performance>*" [string map { "\[" < "\]" > } $pcie_aspm]]} {
+if {![string match {*\[performance\]*} $pcie_aspm]} {
 	echo "Warn : Switch PCIe power saving off or the first couple of pulses gets clocked as fast as 20 MHz"
 	echo "Warn : Issue 'echo performance | sudo tee /sys/module/pcie_aspm/parameters/policy'"
 }
 
-set GPIO_CHIP 4
+set GPIO_CHIP [string index [find_rp1_alias] end]
 source [find interface/raspberrypi-gpio-connector.cfg]
diff --git a/tcl/interface/spidev_example.cfg b/tcl/interface/spidev_example.cfg
new file mode 100644
index 0000000..2354c78
--- /dev/null
+++ b/tcl/interface/spidev_example.cfg
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Example config for using Linux spidev as a SWD adapter.
+
+adapter driver linuxspidev
+adapter speed 3000
+spidev path "/dev/spidev0.0"
+spidev mode 3
+spidev queue_entries 64
diff --git a/tcl/interface/stlink-dap.cfg b/tcl/interface/stlink-dap.cfg
index 99c81c1..009fdb7 100644
--- a/tcl/interface/stlink-dap.cfg
+++ b/tcl/interface/stlink-dap.cfg
@@ -1,22 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-or-later
 
-#
-# STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
-# debugger/programmer
-#
-# This new interface driver creates a ST-Link wrapper for ARM-DAP named "dapdirect"
-# Old ST-LINK/V1 and ST-LINK/V2 pre version V2J24 don't support "dapdirect"
-#
-# SWIM transport is natively supported
-#
+echo "WARNING: interface/stlink-dap.cfg is deprecated, please switch to interface/stlink.cfg"
+source [find interface/stlink.cfg]
 
-adapter driver st-link
-st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757
-
-# transport select dapdirect_jtag
-# transport select dapdirect_swd
-# transport select swim
-
-# Optionally specify the serial number of usb device
-# e.g.
-# adapter serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
diff --git a/tcl/interface/stlink-hla.cfg b/tcl/interface/stlink-hla.cfg
new file mode 100644
index 0000000..5c4adb8
--- /dev/null
+++ b/tcl/interface/stlink-hla.cfg
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
+# debugger/programmer
+#
+
+echo "DEPRECATED: OpenOCD support for ST-Link HLA transport will be dropped soon!"
+echo "Consider updating your ST-Link firmware to a version >= V2J24 (2015)"
+
+adapter driver hla
+hla layout stlink
+hla device_desc "ST-LINK"
+hla vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757
+
+# Optionally specify the serial number of ST-LINK/V2 usb device.  ST-LINK/V2
+# devices seem to have serial numbers with unreadable characters.  ST-LINK/V2
+# firmware version >= V2.J21.S4 recommended to avoid issues with adapter serial
+# number reset issues.
+# eg.
+# adapter serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg
index 8578bf2..99c81c1 100644
--- a/tcl/interface/stlink.cfg
+++ b/tcl/interface/stlink.cfg
@@ -4,15 +4,19 @@
 # STMicroelectronics ST-LINK/V1, ST-LINK/V2, ST-LINK/V2-1, STLINK-V3 in-circuit
 # debugger/programmer
 #
+# This new interface driver creates a ST-Link wrapper for ARM-DAP named "dapdirect"
+# Old ST-LINK/V1 and ST-LINK/V2 pre version V2J24 don't support "dapdirect"
+#
+# SWIM transport is natively supported
+#
+
+adapter driver st-link
+st-link vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757
 
-adapter driver hla
-hla_layout stlink
-hla_device_desc "ST-LINK"
-hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754 0x0483 0x3755 0x0483 0x3757
+# transport select dapdirect_jtag
+# transport select dapdirect_swd
+# transport select swim
 
-# Optionally specify the serial number of ST-LINK/V2 usb device.  ST-LINK/V2
-# devices seem to have serial numbers with unreadable characters.  ST-LINK/V2
-# firmware version >= V2.J21.S4 recommended to avoid issues with adapter serial
-# number reset issues.
-# eg.
+# Optionally specify the serial number of usb device
+# e.g.
 # adapter serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f"
diff --git a/tcl/interface/ti-icdi.cfg b/tcl/interface/ti-icdi.cfg
index db4e1e0..c13d27e 100644
--- a/tcl/interface/ti-icdi.cfg
+++ b/tcl/interface/ti-icdi.cfg
@@ -10,8 +10,8 @@
 #
 
 adapter driver hla
-hla_layout ti-icdi
-hla_vid_pid 0x1cbe 0x00fd
+hla layout ti-icdi
+hla vid_pid 0x1cbe 0x00fd
 
 # Optionally specify the serial number of TI-ICDI devices, for when using
 # multiple devices. Serial numbers can be obtained using lsusb -v
diff --git a/tcl/interface/vdebug.cfg b/tcl/interface/vdebug.cfg
index 7350bb9..63a5955 100644
--- a/tcl/interface/vdebug.cfg
+++ b/tcl/interface/vdebug.cfg
@@ -22,9 +22,9 @@ vdebug server $_VDEBUGHOST:$_VDEBUGPORT
 
 # example config listen on all interfaces, disable tcl/telnet server
 bindto 0.0.0.0
-#gdb_port 3333
-#telnet_port disabled
-tcl_port disabled
+#gdb port 3333
+#telnet port disabled
+tcl port disabled
 
 # transaction batching: 0 - no batching, 1 - (default) wr, 2 - rw
 vdebug batching 1