diff options
Diffstat (limited to 'src/flash')
39 files changed, 320 insertions, 320 deletions
diff --git a/src/flash/mflash.c b/src/flash/mflash.c index 1ad7290..acf1441 100644 --- a/src/flash/mflash.c +++ b/src/flash/mflash.c @@ -423,7 +423,7 @@ COMMAND_HANDLER(mg_probe_cmd) ret = mg_mflash_probe(); if (ret == ERROR_OK) { - command_print(CMD_CTX, + command_print(CMD, "mflash (total %" PRIu32 " sectors) found at 0x%8.8" PRIx32 "", mflash_bank->drv_info->tot_sects, mflash_bank->base); @@ -799,7 +799,7 @@ COMMAND_HANDLER(mg_write_cmd) } if (duration_measure(&bench) == ERROR_OK) { - command_print(CMD_CTX, "wrote %zu bytes from file %s " + command_print(CMD, "wrote %zu bytes from file %s " "in %fs (%0.3f kB/s)", filesize, CMD_ARGV[1], duration_elapsed(&bench), duration_kbps(&bench, filesize)); } @@ -866,7 +866,7 @@ COMMAND_HANDLER(mg_dump_cmd) } if (duration_measure(&bench) == ERROR_OK) { - command_print(CMD_CTX, "dump image (address 0x%8.8" PRIx32 " " + command_print(CMD, "dump image (address 0x%8.8" PRIx32 " " "size %" PRIu32 ") to file %s in %fs (%0.3f kB/s)", address, size, CMD_ARGV[1], duration_elapsed(&bench), duration_kbps(&bench, size)); diff --git a/src/flash/nand/at91sam9.c b/src/flash/nand/at91sam9.c index 0af12b2..47c0505 100644 --- a/src/flash/nand/at91sam9.c +++ b/src/flash/nand/at91sam9.c @@ -547,14 +547,14 @@ COMMAND_HANDLER(handle_at91sam9_cle_command) unsigned num, address_line; if (CMD_ARGC != 2) { - command_print(CMD_CTX, "incorrect number of arguments for 'at91sam9 cle' command"); + command_print(CMD, "incorrect number of arguments for 'at91sam9 cle' command"); return ERROR_OK; } COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_OK; } @@ -582,7 +582,7 @@ COMMAND_HANDLER(handle_at91sam9_ale_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -610,7 +610,7 @@ COMMAND_HANDLER(handle_at91sam9_rdy_busy_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -641,7 +641,7 @@ COMMAND_HANDLER(handle_at91sam9_ce_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } diff --git a/src/flash/nand/core.c b/src/flash/nand/core.c index 7428d22..b9ac793 100644 --- a/src/flash/nand/core.c +++ b/src/flash/nand/core.c @@ -217,7 +217,7 @@ COMMAND_HELPER(nand_command_get_device, unsigned name_index, COMMAND_PARSE_NUMBER(uint, str, num); *nand = get_nand_device_by_num(num); if (!*nand) { - command_print(CMD_CTX, "NAND flash device '%s' not found", str); + command_print(CMD, "NAND flash device '%s' not found", str); return ERROR_COMMAND_SYNTAX_ERROR; } return ERROR_OK; diff --git a/src/flash/nand/fileio.c b/src/flash/nand/fileio.c index 76f6e10..f65f957 100644 --- a/src/flash/nand/fileio.c +++ b/src/flash/nand/fileio.c @@ -59,7 +59,7 @@ int nand_fileio_start(struct command_invocation *cmd, struct nand_fileio_state *state) { if (state->address % nand->page_size) { - command_print(cmd->ctx, "only page-aligned addresses are supported"); + command_print(cmd, "only page-aligned addresses are supported"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -69,7 +69,7 @@ int nand_fileio_start(struct command_invocation *cmd, int retval = fileio_open(&state->fileio, filename, filemode, FILEIO_BINARY); if (ERROR_OK != retval) { const char *msg = (FILEIO_READ == filemode) ? "read" : "write"; - command_print(cmd->ctx, "failed to open '%s' for %s access", + command_print(cmd, "failed to open '%s' for %s access", filename, msg); return retval; } @@ -131,7 +131,7 @@ COMMAND_HELPER(nand_fileio_parse_args, struct nand_fileio_state *state, return retval; if (NULL == nand->device) { - command_print(CMD_CTX, "#%s: not probed", CMD_ARGV[0]); + command_print(CMD, "#%s: not probed", CMD_ARGV[0]); return ERROR_NAND_DEVICE_NOT_PROBED; } @@ -139,7 +139,7 @@ COMMAND_HELPER(nand_fileio_parse_args, struct nand_fileio_state *state, if (need_size) { COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], state->size); if (state->size % nand->page_size) { - command_print(CMD_CTX, "only page-aligned sizes are supported"); + command_print(CMD, "only page-aligned sizes are supported"); return ERROR_COMMAND_SYNTAX_ERROR; } } @@ -155,7 +155,7 @@ COMMAND_HELPER(nand_fileio_parse_args, struct nand_fileio_state *state, else if (sw_ecc && !strcmp(CMD_ARGV[i], "oob_softecc_kw")) state->oob_format |= NAND_OOB_SW_ECC_KW; else { - command_print(CMD_CTX, "unknown option: %s", CMD_ARGV[i]); + command_print(CMD, "unknown option: %s", CMD_ARGV[i]); return ERROR_COMMAND_SYNTAX_ERROR; } } diff --git a/src/flash/nand/lpc3180.c b/src/flash/nand/lpc3180.c index d15fdce..436580e 100644 --- a/src/flash/nand/lpc3180.c +++ b/src/flash/nand/lpc3180.c @@ -1290,7 +1290,7 @@ COMMAND_HANDLER(handle_lpc3180_select_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); struct nand_device *nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "nand device '#%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "nand device '#%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -1310,10 +1310,10 @@ COMMAND_HANDLER(handle_lpc3180_select_command) } if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER) - command_print(CMD_CTX, "%s controller selected", + command_print(CMD, "%s controller selected", selected[lpc3180_info->selected_controller]); else - command_print(CMD_CTX, + command_print(CMD, lpc3180_info->is_bulk ? "%s controller selected bulk mode is available" : "%s controller selected bulk mode is not available", selected[lpc3180_info->selected_controller]); diff --git a/src/flash/nand/lpc32xx.c b/src/flash/nand/lpc32xx.c index 1ed16df..6febe16 100644 --- a/src/flash/nand/lpc32xx.c +++ b/src/flash/nand/lpc32xx.c @@ -1760,7 +1760,7 @@ COMMAND_HANDLER(handle_lpc32xx_select_command) COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num); struct nand_device *nand = get_nand_device_by_num(num); if (!nand) { - command_print(CMD_CTX, "nand device '#%s' is out of bounds", + command_print(CMD, "nand device '#%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -1778,7 +1778,7 @@ COMMAND_HANDLER(handle_lpc32xx_select_command) return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, "%s controller selected", + command_print(CMD, "%s controller selected", selected[lpc32xx_info->selected_controller]); return ERROR_OK; diff --git a/src/flash/nand/mxc.c b/src/flash/nand/mxc.c index 6069c62..b541157 100644 --- a/src/flash/nand/mxc.c +++ b/src/flash/nand/mxc.c @@ -157,7 +157,7 @@ COMMAND_HANDLER(handle_mxc_biswap_command) int retval = CALL_COMMAND_HANDLER(nand_command_get_device, 0, &nand); if (retval != ERROR_OK) { - command_print(CMD_CTX, "invalid nand device number or name: %s", CMD_ARGV[0]); + command_print(CMD, "invalid nand device number or name: %s", CMD_ARGV[0]); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -169,9 +169,9 @@ COMMAND_HANDLER(handle_mxc_biswap_command) mxc_nf_info->flags.biswap_enabled = false; } if (mxc_nf_info->flags.biswap_enabled) - command_print(CMD_CTX, "BI-swapping enabled on %s", nand->name); + command_print(CMD, "BI-swapping enabled on %s", nand->name); else - command_print(CMD_CTX, "BI-swapping disabled on %s", nand->name); + command_print(CMD, "BI-swapping disabled on %s", nand->name); return ERROR_OK; } diff --git a/src/flash/nand/tcl.c b/src/flash/nand/tcl.c index 8a7022a..5480e0d 100644 --- a/src/flash/nand/tcl.c +++ b/src/flash/nand/tcl.c @@ -37,20 +37,20 @@ COMMAND_HANDLER(handle_nand_list_command) int i; if (!nand_devices) { - command_print(CMD_CTX, "no NAND flash devices configured"); + command_print(CMD, "no NAND flash devices configured"); return ERROR_OK; } for (p = nand_devices, i = 0; p; p = p->next, i++) { if (p->device) - command_print(CMD_CTX, "#%i: %s (%s) " + command_print(CMD, "#%i: %s (%s) " "pagesize: %i, buswidth: %i,\n\t" "blocksize: %i, blocks: %i", i, p->device->name, p->manufacturer->name, p->page_size, p->bus_width, p->erase_size, p->num_blocks); else - command_print(CMD_CTX, "#%i: not probed", i); + command_print(CMD, "#%i: not probed", i); } return ERROR_OK; @@ -87,7 +87,7 @@ COMMAND_HANDLER(handle_nand_info_command) return retval; if (NULL == p->device) { - command_print(CMD_CTX, "#%s: not probed", CMD_ARGV[0]); + command_print(CMD, "#%s: not probed", CMD_ARGV[0]); return ERROR_OK; } @@ -97,7 +97,7 @@ COMMAND_HANDLER(handle_nand_info_command) if (last >= p->num_blocks) last = p->num_blocks - 1; - command_print(CMD_CTX, + command_print(CMD, "#%i: %s (%s) pagesize: %i, buswidth: %i, erasesize: %i", i++, p->device->name, @@ -123,7 +123,7 @@ COMMAND_HANDLER(handle_nand_info_command) else bad_state = " (block condition unknown)"; - command_print(CMD_CTX, + command_print(CMD, "\t#%i: 0x%8.8" PRIx32 " (%" PRId32 "kB) %s%s", j, p->blocks[j].offset, @@ -147,7 +147,7 @@ COMMAND_HANDLER(handle_nand_probe_command) retval = nand_probe(p); if (retval == ERROR_OK) { - command_print(CMD_CTX, "NAND flash device '%s (%s)' found", + command_print(CMD, "NAND flash device '%s (%s)' found", p->device->name, p->manufacturer->name); } @@ -189,7 +189,7 @@ COMMAND_HANDLER(handle_nand_erase_command) retval = nand_erase(p, offset, offset + length - 1); if (retval == ERROR_OK) { - command_print(CMD_CTX, "erased blocks %lu to %lu " + command_print(CMD, "erased blocks %lu to %lu " "on NAND flash device #%s '%s'", offset, offset + length - 1, CMD_ARGV[0], p->device->name); @@ -233,7 +233,7 @@ COMMAND_HANDLER(handle_nand_check_bad_blocks_command) retval = nand_build_bbt(p, first, last); if (retval == ERROR_OK) { - command_print(CMD_CTX, "checked NAND flash device for bad blocks, " + command_print(CMD, "checked NAND flash device for bad blocks, " "use \"nand info\" command to list blocks"); } @@ -253,7 +253,7 @@ COMMAND_HANDLER(handle_nand_write_command) while (s.size > 0) { int bytes_read = nand_fileio_read(nand, &s); if (bytes_read <= 0) { - command_print(CMD_CTX, "error while reading file"); + command_print(CMD, "error while reading file"); nand_fileio_cleanup(&s); return ERROR_FAIL; } @@ -262,7 +262,7 @@ COMMAND_HANDLER(handle_nand_write_command) retval = nand_write_page(nand, s.address / nand->page_size, s.page, s.page_size, s.oob, s.oob_size); if (ERROR_OK != retval) { - command_print(CMD_CTX, "failed writing file %s " + command_print(CMD, "failed writing file %s " "to NAND flash %s at offset 0x%8.8" PRIx32, CMD_ARGV[1], CMD_ARGV[0], s.address); nand_fileio_cleanup(&s); @@ -272,7 +272,7 @@ COMMAND_HANDLER(handle_nand_write_command) } if (nand_fileio_finish(&s) == ERROR_OK) { - command_print(CMD_CTX, "wrote file %s to NAND flash %s up to " + command_print(CMD, "wrote file %s to NAND flash %s up to " "offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", CMD_ARGV[1], CMD_ARGV[0], s.address, duration_elapsed(&s.bench), duration_kbps(&s.bench, total_bytes)); @@ -302,7 +302,7 @@ COMMAND_HANDLER(handle_nand_verify_command) retval = nand_read_page(nand, dev.address / dev.page_size, dev.page, dev.page_size, dev.oob, dev.oob_size); if (ERROR_OK != retval) { - command_print(CMD_CTX, "reading NAND flash page failed"); + command_print(CMD, "reading NAND flash page failed"); nand_fileio_cleanup(&dev); nand_fileio_cleanup(&file); return retval; @@ -310,7 +310,7 @@ COMMAND_HANDLER(handle_nand_verify_command) int bytes_read = nand_fileio_read(nand, &file); if (bytes_read <= 0) { - command_print(CMD_CTX, "error while reading file"); + command_print(CMD, "error while reading file"); nand_fileio_cleanup(&dev); nand_fileio_cleanup(&file); return ERROR_FAIL; @@ -318,7 +318,7 @@ COMMAND_HANDLER(handle_nand_verify_command) if ((dev.page && memcmp(dev.page, file.page, dev.page_size)) || (dev.oob && memcmp(dev.oob, file.oob, dev.oob_size))) { - command_print(CMD_CTX, "NAND flash contents differ " + command_print(CMD, "NAND flash contents differ " "at 0x%8.8" PRIx32, dev.address); nand_fileio_cleanup(&dev); nand_fileio_cleanup(&file); @@ -330,7 +330,7 @@ COMMAND_HANDLER(handle_nand_verify_command) } if (nand_fileio_finish(&file) == ERROR_OK) { - command_print(CMD_CTX, "verified file %s in NAND flash %s " + command_print(CMD, "verified file %s in NAND flash %s " "up to offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", CMD_ARGV[1], CMD_ARGV[0], dev.address, duration_elapsed(&file.bench), duration_kbps(&file.bench, dev.size)); @@ -354,7 +354,7 @@ COMMAND_HANDLER(handle_nand_dump_command) retval = nand_read_page(nand, s.address / nand->page_size, s.page, s.page_size, s.oob, s.oob_size); if (ERROR_OK != retval) { - command_print(CMD_CTX, "reading NAND flash page failed"); + command_print(CMD, "reading NAND flash page failed"); nand_fileio_cleanup(&s); return retval; } @@ -374,7 +374,7 @@ COMMAND_HANDLER(handle_nand_dump_command) return retval; if (nand_fileio_finish(&s) == ERROR_OK) { - command_print(CMD_CTX, "dumped %zu bytes in %fs (%0.3f KiB/s)", + command_print(CMD, "dumped %zu bytes in %fs (%0.3f KiB/s)", filesize, duration_elapsed(&s.bench), duration_kbps(&s.bench, filesize)); } @@ -392,7 +392,7 @@ COMMAND_HANDLER(handle_nand_raw_access_command) return retval; if (NULL == p->device) { - command_print(CMD_CTX, "#%s: not probed", CMD_ARGV[0]); + command_print(CMD, "#%s: not probed", CMD_ARGV[0]); return ERROR_OK; } @@ -400,7 +400,7 @@ COMMAND_HANDLER(handle_nand_raw_access_command) COMMAND_PARSE_ENABLE(CMD_ARGV[1], p->use_raw); const char *msg = p->use_raw ? "enabled" : "disabled"; - command_print(CMD_CTX, "raw access is %s", msg); + command_print(CMD, "raw access is %s", msg); return ERROR_OK; } @@ -502,13 +502,13 @@ COMMAND_HANDLER(handle_nand_init_command) static int nand_list_walker(struct nand_flash_controller *c, void *x) { struct command_invocation *cmd = x; - command_print(cmd->ctx, " %s", c->name); + command_print(cmd, " %s", c->name); return ERROR_OK; } COMMAND_HANDLER(handle_nand_list_drivers) { - command_print(CMD_CTX, "Available NAND flash controller drivers:"); + command_print(CMD, "Available NAND flash controller drivers:"); return nand_driver_walk(&nand_list_walker, CMD); } diff --git a/src/flash/nor/ambiqmicro.c b/src/flash/nor/ambiqmicro.c index a536d54..b1e3e72 100644 --- a/src/flash/nor/ambiqmicro.c +++ b/src/flash/nor/ambiqmicro.c @@ -791,9 +791,9 @@ COMMAND_HANDLER(ambiqmicro_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "ambiqmicro mass erase complete"); + command_print(CMD, "ambiqmicro mass erase complete"); } else - command_print(CMD_CTX, "ambiqmicro mass erase failed"); + command_print(CMD, "ambiqmicro mass erase failed"); return ERROR_OK; } @@ -815,9 +815,9 @@ COMMAND_HANDLER(ambiqmicro_handle_page_erase_command) return retval; if (ambiqmicro_erase(bank, first, last) == ERROR_OK) - command_print(CMD_CTX, "ambiqmicro page erase complete"); + command_print(CMD, "ambiqmicro page erase complete"); else - command_print(CMD_CTX, "ambiqmicro page erase failed"); + command_print(CMD, "ambiqmicro page erase failed"); return ERROR_OK; } @@ -838,7 +838,7 @@ COMMAND_HANDLER(ambiqmicro_handle_program_otp_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], offset); COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], count); - command_print(CMD_CTX, "offset=0x%08x count=%d", offset, count); + command_print(CMD, "offset=0x%08x count=%d", offset, count); CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); diff --git a/src/flash/nor/at91sam3.c b/src/flash/nor/at91sam3.c index 616c3fe..2457c15 100644 --- a/src/flash/nor/at91sam3.c +++ b/src/flash/nor/at91sam3.c @@ -256,7 +256,7 @@ static struct sam3_chip *get_current_sam3(struct command_invocation *cmd) t = get_current_target(cmd->ctx); if (!t) { - command_print(cmd->ctx, "No current target?"); + command_print(cmd, "No current target?"); return NULL; } @@ -264,7 +264,7 @@ static struct sam3_chip *get_current_sam3(struct command_invocation *cmd) if (!p) { /* this should not happen */ /* the command is not registered until the chip is created? */ - command_print(cmd->ctx, "No SAM3 chips exist?"); + command_print(cmd, "No SAM3 chips exist?"); return NULL; } @@ -273,7 +273,7 @@ static struct sam3_chip *get_current_sam3(struct command_invocation *cmd) return p; p = p->next; } - command_print(cmd->ctx, "Cannot find SAM3 chip?"); + command_print(cmd, "Cannot find SAM3 chip?"); return NULL; } @@ -3549,7 +3549,7 @@ COMMAND_HANDLER(sam3_handle_info_command) if (pChip->details.bank[0].pBank == NULL) { x = 0; need_define: - command_print(CMD_CTX, + command_print(CMD, "Please define bank %d via command: flash bank %s ... ", x, at91sam3_flash.name); @@ -3608,7 +3608,7 @@ COMMAND_HANDLER(sam3_handle_gpnvm_command) } if (pChip->details.bank[0].pBank == NULL) { - command_print(CMD_CTX, "Bank0 must be defined first via: flash bank %s ...", + command_print(CMD, "Bank0 must be defined first via: flash bank %s ...", at91sam3_flash.name); return ERROR_FAIL; } @@ -3647,22 +3647,22 @@ showall: r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v); if (r != ERROR_OK) break; - command_print(CMD_CTX, "sam3-gpnvm%u: %u", x, v); + command_print(CMD, "sam3-gpnvm%u: %u", x, v); } return r; } if ((who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms)) { r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), who, &v); - command_print(CMD_CTX, "sam3-gpnvm%u: %u", who, v); + command_print(CMD, "sam3-gpnvm%u: %u", who, v); return r; } else { - command_print(CMD_CTX, "sam3-gpnvm invalid GPNVM: %u", who); + command_print(CMD, "sam3-gpnvm invalid GPNVM: %u", who); return ERROR_COMMAND_SYNTAX_ERROR; } } if (who == -1) { - command_print(CMD_CTX, "Missing GPNVM number"); + command_print(CMD, "Missing GPNVM number"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -3672,7 +3672,7 @@ showall: (0 == strcmp("clear", CMD_ARGV[0]))) /* quietly accept both */ r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who); else { - command_print(CMD_CTX, "Unknown command: %s", CMD_ARGV[0]); + command_print(CMD, "Unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } return r; @@ -3697,7 +3697,7 @@ COMMAND_HANDLER(sam3_handle_slowclk_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v); if (v > 200000) { /* absurd slow clock of 200Khz? */ - command_print(CMD_CTX, "Absurd/illegal slow clock freq: %d\n", (int)(v)); + command_print(CMD, "Absurd/illegal slow clock freq: %d\n", (int)(v)); return ERROR_COMMAND_SYNTAX_ERROR; } pChip->cfg.slow_freq = v; @@ -3705,11 +3705,11 @@ COMMAND_HANDLER(sam3_handle_slowclk_command) } default: /* error */ - command_print(CMD_CTX, "Too many parameters"); + command_print(CMD, "Too many parameters"); return ERROR_COMMAND_SYNTAX_ERROR; break; } - command_print(CMD_CTX, "Slowclk freq: %d.%03dkhz", + command_print(CMD, "Slowclk freq: %d.%03dkhz", (int)(pChip->cfg.slow_freq / 1000), (int)(pChip->cfg.slow_freq % 1000)); return ERROR_OK; diff --git a/src/flash/nor/at91sam4.c b/src/flash/nor/at91sam4.c index 719da2b..621754c 100644 --- a/src/flash/nor/at91sam4.c +++ b/src/flash/nor/at91sam4.c @@ -235,7 +235,7 @@ static struct sam4_chip *get_current_sam4(struct command_invocation *cmd) t = get_current_target(cmd->ctx); if (!t) { - command_print(cmd->ctx, "No current target?"); + command_print(cmd, "No current target?"); return NULL; } @@ -243,7 +243,7 @@ static struct sam4_chip *get_current_sam4(struct command_invocation *cmd) if (!p) { /* this should not happen */ /* the command is not registered until the chip is created? */ - command_print(cmd->ctx, "No SAM4 chips exist?"); + command_print(cmd, "No SAM4 chips exist?"); return NULL; } @@ -252,7 +252,7 @@ static struct sam4_chip *get_current_sam4(struct command_invocation *cmd) return p; p = p->next; } - command_print(cmd->ctx, "Cannot find SAM4 chip?"); + command_print(cmd, "Cannot find SAM4 chip?"); return NULL; } @@ -3029,7 +3029,7 @@ COMMAND_HANDLER(sam4_handle_info_command) if (pChip->details.bank[0].pBank == NULL) { x = 0; need_define: - command_print(CMD_CTX, + command_print(CMD, "Please define bank %d via command: flash bank %s ... ", x, at91sam4_flash.name); @@ -3088,7 +3088,7 @@ COMMAND_HANDLER(sam4_handle_gpnvm_command) } if (pChip->details.bank[0].pBank == NULL) { - command_print(CMD_CTX, "Bank0 must be defined first via: flash bank %s ...", + command_print(CMD, "Bank0 must be defined first via: flash bank %s ...", at91sam4_flash.name); return ERROR_FAIL; } @@ -3127,23 +3127,23 @@ showall: r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v); if (r != ERROR_OK) break; - command_print(CMD_CTX, "sam4-gpnvm%u: %u", x, v); + command_print(CMD, "sam4-gpnvm%u: %u", x, v); } return r; } if ((who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms)) { r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), who, &v); if (r == ERROR_OK) - command_print(CMD_CTX, "sam4-gpnvm%u: %u", who, v); + command_print(CMD, "sam4-gpnvm%u: %u", who, v); return r; } else { - command_print(CMD_CTX, "sam4-gpnvm invalid GPNVM: %u", who); + command_print(CMD, "sam4-gpnvm invalid GPNVM: %u", who); return ERROR_COMMAND_SYNTAX_ERROR; } } if (who == -1) { - command_print(CMD_CTX, "Missing GPNVM number"); + command_print(CMD, "Missing GPNVM number"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -3153,7 +3153,7 @@ showall: (0 == strcmp("clear", CMD_ARGV[0]))) /* quietly accept both */ r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who); else { - command_print(CMD_CTX, "Unknown command: %s", CMD_ARGV[0]); + command_print(CMD, "Unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } return r; @@ -3178,7 +3178,7 @@ COMMAND_HANDLER(sam4_handle_slowclk_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v); if (v > 200000) { /* absurd slow clock of 200Khz? */ - command_print(CMD_CTX, "Absurd/illegal slow clock freq: %d\n", (int)(v)); + command_print(CMD, "Absurd/illegal slow clock freq: %d\n", (int)(v)); return ERROR_COMMAND_SYNTAX_ERROR; } pChip->cfg.slow_freq = v; @@ -3186,11 +3186,11 @@ COMMAND_HANDLER(sam4_handle_slowclk_command) } default: /* error */ - command_print(CMD_CTX, "Too many parameters"); + command_print(CMD, "Too many parameters"); return ERROR_COMMAND_SYNTAX_ERROR; break; } - command_print(CMD_CTX, "Slowclk freq: %d.%03dkhz", + command_print(CMD, "Slowclk freq: %d.%03dkhz", (int)(pChip->cfg.slow_freq / 1000), (int)(pChip->cfg.slow_freq % 1000)); return ERROR_OK; diff --git a/src/flash/nor/at91sam7.c b/src/flash/nor/at91sam7.c index 15b93a2..232260b 100644 --- a/src/flash/nor/at91sam7.c +++ b/src/flash/nor/at91sam7.c @@ -1067,7 +1067,7 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command) if (bank == NULL) return ERROR_FLASH_BANK_INVALID; if (strcmp(bank->driver->name, "at91sam7")) { - command_print(CMD_CTX, "not an at91sam7 flash bank '%s'", CMD_ARGV[0]); + command_print(CMD, "not an at91sam7 flash bank '%s'", CMD_ARGV[0]); return ERROR_FLASH_BANK_INVALID; } if (bank->target->state != TARGET_HALTED) { @@ -1091,7 +1091,7 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command) COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], bit); if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits)) { - command_print(CMD_CTX, + command_print(CMD, "gpnvm bit '#%s' is out of bounds for target %s", CMD_ARGV[0], at91sam7_info->target_name); diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c index c325194..b6cff9a 100644 --- a/src/flash/nor/at91samd.c +++ b/src/flash/nor/at91samd.c @@ -947,9 +947,9 @@ COMMAND_HANDLER(samd_handle_chip_erase_command) * perform the erase. */ res = target_write_u8(target, SAMD_DSU + SAMD_DSU_CTRL_EXT, (1<<4)); if (res == ERROR_OK) - command_print(CMD_CTX, "chip erase started"); + command_print(CMD, "chip erase started"); else - command_print(CMD_CTX, "write to DSU CTRL failed"); + command_print(CMD, "write to DSU CTRL failed"); } return res; @@ -961,7 +961,7 @@ COMMAND_HANDLER(samd_handle_set_security_command) struct target *target = get_current_target(CMD_CTX); if (CMD_ARGC < 1 || (CMD_ARGC >= 1 && (strcmp(CMD_ARGV[0], "enable")))) { - command_print(CMD_CTX, "supply the \"enable\" argument to proceed."); + command_print(CMD, "supply the \"enable\" argument to proceed."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -975,9 +975,9 @@ COMMAND_HANDLER(samd_handle_set_security_command) /* Check (and clear) error conditions */ if (res == ERROR_OK) - command_print(CMD_CTX, "chip secured on next power-cycle"); + command_print(CMD, "chip secured on next power-cycle"); else - command_print(CMD_CTX, "failed to secure chip"); + command_print(CMD, "failed to secure chip"); } return res; @@ -1008,7 +1008,7 @@ COMMAND_HANDLER(samd_handle_eeprom_command) } if (code > 6) { - command_print(CMD_CTX, "Invalid EEPROM size. Please see " + command_print(CMD, "Invalid EEPROM size. Please see " "datasheet for a list valid sizes."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1022,10 +1022,10 @@ COMMAND_HANDLER(samd_handle_eeprom_command) uint32_t size = ((val >> 4) & 0x7); /* grab size code */ if (size == 0x7) - command_print(CMD_CTX, "EEPROM is disabled"); + command_print(CMD, "EEPROM is disabled"); else { /* Otherwise, 6 is 256B, 0 is 16KB */ - command_print(CMD_CTX, "EEPROM size is %u bytes", + command_print(CMD, "EEPROM size is %u bytes", (2 << (13 - size))); } } @@ -1038,7 +1038,7 @@ COMMAND_HANDLER(samd_handle_eeprom_command) static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value) { if (num >= CMD_ARGC) { - command_print(CMD_CTX, "Too few Arguments."); + command_print(CMD, "Too few Arguments."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1049,12 +1049,12 @@ static COMMAND_HELPER(get_u64_from_hexarg, unsigned int num, uint64_t *value) *value = strtoull(&(CMD_ARGV[num][2]), &check, 16); if ((value == 0 && errno == ERANGE) || check == NULL || *check != 0) { - command_print(CMD_CTX, "Invalid 64-bit hex value in argument %d.", + command_print(CMD, "Invalid 64-bit hex value in argument %d.", num + 1); return ERROR_COMMAND_SYNTAX_ERROR; } } else { - command_print(CMD_CTX, "Argument %d needs to be a hex value.", num + 1); + command_print(CMD, "Argument %d needs to be a hex value.", num + 1); return ERROR_COMMAND_SYNTAX_ERROR; } return ERROR_OK; @@ -1067,7 +1067,7 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command) if (target) { if (CMD_ARGC > 2) { - command_print(CMD_CTX, "Too much Arguments given."); + command_print(CMD, "Too much Arguments given."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1105,7 +1105,7 @@ COMMAND_HANDLER(samd_handle_nvmuserrow_command) uint64_t value; res = read_userrow(target, &value); if (res == ERROR_OK) - command_print(CMD_CTX, "NVMUSERROW: 0x%016"PRIX64, value); + command_print(CMD, "NVMUSERROW: 0x%016"PRIX64, value); else LOG_ERROR("NVMUSERROW could not be read."); } @@ -1145,7 +1145,7 @@ COMMAND_HANDLER(samd_handle_bootloader_command) } if (code > 6) { - command_print(CMD_CTX, "Invalid bootloader size. Please " + command_print(CMD, "Invalid bootloader size. Please " "see datasheet for a list valid sizes."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1166,7 +1166,7 @@ COMMAND_HANDLER(samd_handle_bootloader_command) nb = (2 << (8 - size)) * page_size; /* There are 4 pages per row */ - command_print(CMD_CTX, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)", + command_print(CMD, "Bootloader size is %" PRIu32 " bytes (%" PRIu32 " rows)", nb, (uint32_t)(nb / (page_size * 4))); } } diff --git a/src/flash/nor/atsame5.c b/src/flash/nor/atsame5.c index 4a114a3..eac7847 100644 --- a/src/flash/nor/atsame5.c +++ b/src/flash/nor/atsame5.c @@ -765,9 +765,9 @@ COMMAND_HANDLER(same5_handle_chip_erase_command) * perform the erase. */ int res = target_write_u8(target, SAMD_DSU + SAMD_DSU_CTRL_EXT, (1<<4)); if (res == ERROR_OK) - command_print(CMD_CTX, "chip erase started"); + command_print(CMD, "chip erase started"); else - command_print(CMD_CTX, "write to DSU CTRL failed"); + command_print(CMD, "write to DSU CTRL failed"); return res; } @@ -781,7 +781,7 @@ COMMAND_HANDLER(same5_handle_userpage_command) return ERROR_FAIL; if (CMD_ARGC > 2) { - command_print(CMD_CTX, "Too much Arguments given."); + command_print(CMD, "Too much Arguments given."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -806,7 +806,7 @@ COMMAND_HANDLER(same5_handle_userpage_command) int res2 = target_read_memory(target, SAMD_USER_ROW, 4, 2, buffer); if (res2 == ERROR_OK) { uint64_t value = target_buffer_get_u64(target, buffer); - command_print(CMD_CTX, "USER PAGE: 0x%016"PRIX64, value); + command_print(CMD, "USER PAGE: 0x%016"PRIX64, value); } else { LOG_ERROR("USER PAGE could not be read."); } @@ -829,7 +829,7 @@ COMMAND_HANDLER(same5_handle_bootloader_command) unsigned long size = strtoul(CMD_ARGV[0], NULL, 0); uint32_t code = (size + 8191) / 8192; if (code > 15) { - command_print(CMD_CTX, "Invalid bootloader size. Please " + command_print(CMD, "Invalid bootloader size. Please " "see datasheet for a list valid sizes."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -842,7 +842,7 @@ COMMAND_HANDLER(same5_handle_bootloader_command) if (res2 == ERROR_OK) { uint32_t code = (val >> 26) & 0xf; /* grab size code */ uint32_t size = (15 - code) * 8192; - command_print(CMD_CTX, "Bootloader protected in the first %" + command_print(CMD, "Bootloader protected in the first %" PRIu32 " bytes", size); } diff --git a/src/flash/nor/atsamv.c b/src/flash/nor/atsamv.c index 5beeefc..d6f1a0a 100644 --- a/src/flash/nor/atsamv.c +++ b/src/flash/nor/atsamv.c @@ -672,22 +672,22 @@ showall: r = samv_get_gpnvm(target, x, &v); if (r != ERROR_OK) break; - command_print(CMD_CTX, "samv-gpnvm%u: %u", x, v); + command_print(CMD, "samv-gpnvm%u: %u", x, v); } return r; } if ((who >= 0) && (((unsigned)who) < SAMV_NUM_GPNVM_BITS)) { r = samv_get_gpnvm(target, who, &v); - command_print(CMD_CTX, "samv-gpnvm%u: %u", who, v); + command_print(CMD, "samv-gpnvm%u: %u", who, v); return r; } else { - command_print(CMD_CTX, "invalid gpnvm: %u", who); + command_print(CMD, "invalid gpnvm: %u", who); return ERROR_COMMAND_SYNTAX_ERROR; } } if (who == -1) { - command_print(CMD_CTX, "missing gpnvm number"); + command_print(CMD, "missing gpnvm number"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -696,7 +696,7 @@ showall: else if (!strcmp("clr", CMD_ARGV[0]) || !strcmp("clear", CMD_ARGV[0])) r = samv_clear_gpnvm(target, who); else { - command_print(CMD_CTX, "unknown command: %s", CMD_ARGV[0]); + command_print(CMD, "unknown command: %s", CMD_ARGV[0]); r = ERROR_COMMAND_SYNTAX_ERROR; } return r; diff --git a/src/flash/nor/avrf.c b/src/flash/nor/avrf.c index 6969f77..178567e 100644 --- a/src/flash/nor/avrf.c +++ b/src/flash/nor/avrf.c @@ -433,9 +433,9 @@ COMMAND_HANDLER(avrf_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "avr mass erase complete"); + command_print(CMD, "avr mass erase complete"); } else - command_print(CMD_CTX, "avr mass erase failed"); + command_print(CMD, "avr mass erase failed"); LOG_DEBUG("%s", __func__); return ERROR_OK; diff --git a/src/flash/nor/efm32.c b/src/flash/nor/efm32.c index d2ac3a8..83d133f 100644 --- a/src/flash/nor/efm32.c +++ b/src/flash/nor/efm32.c @@ -1093,7 +1093,7 @@ COMMAND_HANDLER(efm32x_handle_debuglock_command) return retval; } - command_print(CMD_CTX, "efm32x debug interface locked, reset the device to apply"); + command_print(CMD, "efm32x debug interface locked, reset the device to apply"); return ERROR_OK; } diff --git a/src/flash/nor/em357.c b/src/flash/nor/em357.c index e6b2728..38fb731 100644 --- a/src/flash/nor/em357.c +++ b/src/flash/nor/em357.c @@ -776,7 +776,7 @@ COMMAND_HANDLER(em357_handle_lock_command) } if (em357_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to erase options"); + command_print(CMD, "em357 failed to erase options"); return ERROR_OK; } @@ -784,11 +784,11 @@ COMMAND_HANDLER(em357_handle_lock_command) em357_info->option_bytes.RDP = 0; if (em357_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to lock device"); + command_print(CMD, "em357 failed to lock device"); return ERROR_OK; } - command_print(CMD_CTX, "em357 locked"); + command_print(CMD, "em357 locked"); return ERROR_OK; } @@ -813,16 +813,16 @@ COMMAND_HANDLER(em357_handle_unlock_command) } if (em357_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to unlock device"); + command_print(CMD, "em357 failed to unlock device"); return ERROR_OK; } if (em357_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "em357 failed to lock device"); + command_print(CMD, "em357 failed to lock device"); return ERROR_OK; } - command_print(CMD_CTX, "em357 unlocked.\n" + command_print(CMD, "em357 unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -886,9 +886,9 @@ COMMAND_HANDLER(em357_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "em357 mass erase complete"); + command_print(CMD, "em357 mass erase complete"); } else - command_print(CMD_CTX, "em357 mass erase failed"); + command_print(CMD, "em357 mass erase failed"); return retval; } diff --git a/src/flash/nor/esirisc_flash.c b/src/flash/nor/esirisc_flash.c index 948d001..4e33b94 100644 --- a/src/flash/nor/esirisc_flash.c +++ b/src/flash/nor/esirisc_flash.c @@ -516,7 +516,7 @@ COMMAND_HANDLER(handle_esirisc_flash_mass_erase_command) retval = esirisc_flash_mass_erase(bank); - command_print(CMD_CTX, "mass erase %s", + command_print(CMD, "mass erase %s", (retval == ERROR_OK) ? "successful" : "failed"); return retval; @@ -536,7 +536,7 @@ COMMAND_HANDLER(handle_esirisc_flash_ref_erase_command) retval = esirisc_flash_ref_erase(bank); - command_print(CMD_CTX, "erase reference cell %s", + command_print(CMD, "erase reference cell %s", (retval == ERROR_OK) ? "successful" : "failed"); return retval; diff --git a/src/flash/nor/fm3.c b/src/flash/nor/fm3.c index f2da2af..eeefa3f 100644 --- a/src/flash/nor/fm3.c +++ b/src/flash/nor/fm3.c @@ -958,9 +958,9 @@ COMMAND_HANDLER(fm3_handle_chip_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "fm3 chip erase complete"); + command_print(CMD, "fm3 chip erase complete"); } else { - command_print(CMD_CTX, "fm3 chip erase failed"); + command_print(CMD, "fm3 chip erase failed"); } return ERROR_OK; diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c index 8475135..687a337 100644 --- a/src/flash/nor/kinetis.c +++ b/src/flash/nor/kinetis.c @@ -2895,7 +2895,7 @@ COMMAND_HANDLER(kinetis_nvm_partition) flex_nvm_partition_code = (uint8_t)((sim_fcfg1 >> 8) & 0x0f); switch (flex_nvm_partition_code) { case 0: - command_print(CMD_CTX, "No EEPROM backup, data flash only"); + command_print(CMD, "No EEPROM backup, data flash only"); break; case 1: case 2: @@ -2903,10 +2903,10 @@ COMMAND_HANDLER(kinetis_nvm_partition) case 4: case 5: case 6: - command_print(CMD_CTX, "EEPROM backup %d KB", 4 << flex_nvm_partition_code); + command_print(CMD, "EEPROM backup %d KB", 4 << flex_nvm_partition_code); break; case 8: - command_print(CMD_CTX, "No data flash, EEPROM backup only"); + command_print(CMD, "No data flash, EEPROM backup only"); break; case 0x9: case 0xA: @@ -2914,13 +2914,13 @@ COMMAND_HANDLER(kinetis_nvm_partition) case 0xC: case 0xD: case 0xE: - command_print(CMD_CTX, "data flash %d KB", 4 << (flex_nvm_partition_code & 7)); + command_print(CMD, "data flash %d KB", 4 << (flex_nvm_partition_code & 7)); break; case 0xf: - command_print(CMD_CTX, "No EEPROM backup, data flash only (DEPART not set)"); + command_print(CMD, "No EEPROM backup, data flash only (DEPART not set)"); break; default: - command_print(CMD_CTX, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code); + command_print(CMD, "Unsupported EEPROM backup size code 0x%02" PRIx8, flex_nvm_partition_code); } return ERROR_OK; @@ -2986,7 +2986,7 @@ COMMAND_HANDLER(kinetis_nvm_partition) if (result != ERROR_OK) return result; - command_print(CMD_CTX, "FlexNVM partition set. Please reset MCU."); + command_print(CMD, "FlexNVM partition set. Please reset MCU."); if (k_chip) { first_nvm_bank = k_chip->num_pflash_blocks; @@ -2996,7 +2996,7 @@ COMMAND_HANDLER(kinetis_nvm_partition) k_chip->probed = false; } - command_print(CMD_CTX, "FlexNVM banks will be re-probed to set new data flash size."); + command_print(CMD, "FlexNVM banks will be re-probed to set new data flash size."); return ERROR_OK; } @@ -3015,12 +3015,12 @@ COMMAND_HANDLER(kinetis_fcf_source_handler) } if (allow_fcf_writes) { - command_print(CMD_CTX, "Arbitrary Flash Configuration Field writes enabled."); - command_print(CMD_CTX, "Protection info writes to FCF disabled."); + command_print(CMD, "Arbitrary Flash Configuration Field writes enabled."); + command_print(CMD, "Protection info writes to FCF disabled."); LOG_WARNING("BEWARE: incorrect flash configuration may permanently lock the device."); } else { - command_print(CMD_CTX, "Protection info writes to Flash Configuration Field enabled."); - command_print(CMD_CTX, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device."); + command_print(CMD, "Protection info writes to Flash Configuration Field enabled."); + command_print(CMD, "Arbitrary FCF writes disabled. Mode safe from unwanted locking of the device."); } return ERROR_OK; @@ -3035,7 +3035,7 @@ COMMAND_HANDLER(kinetis_fopt_handler) fcf_fopt = (uint8_t)strtoul(CMD_ARGV[0], NULL, 0); fcf_fopt_configured = true; } else { - command_print(CMD_CTX, "FCF_FOPT 0x%02" PRIx8, fcf_fopt); + command_print(CMD, "FCF_FOPT 0x%02" PRIx8, fcf_fopt); } return ERROR_OK; diff --git a/src/flash/nor/lpc2000.c b/src/flash/nor/lpc2000.c index cb3f58e..2a69af6 100644 --- a/src/flash/nor/lpc2000.c +++ b/src/flash/nor/lpc2000.c @@ -1579,11 +1579,11 @@ COMMAND_HANDLER(lpc2000_handle_part_id_command) int status_code = get_lpc2000_part_id(bank, &part_id); if (status_code != 0x0) { if (status_code == ERROR_FLASH_OPERATION_FAILED) { - command_print(CMD_CTX, "no sufficient working area specified, can't access LPC2000 IAP interface"); + command_print(CMD, "no sufficient working area specified, can't access LPC2000 IAP interface"); } else - command_print(CMD_CTX, "lpc2000 IAP returned status code %i", status_code); + command_print(CMD, "lpc2000 IAP returned status code %i", status_code); } else - command_print(CMD_CTX, "lpc2000 part id: 0x%8.8" PRIx32, part_id); + command_print(CMD, "lpc2000 part id: 0x%8.8" PRIx32, part_id); return retval; } diff --git a/src/flash/nor/lpc2900.c b/src/flash/nor/lpc2900.c index c798e44..5412c93 100644 --- a/src/flash/nor/lpc2900.c +++ b/src/flash/nor/lpc2900.c @@ -501,7 +501,7 @@ COMMAND_HANDLER(lpc2900_handle_signature_command) if (status != ERROR_OK) return status; - command_print(CMD_CTX, "signature: 0x%8.8" PRIx32 + command_print(CMD, "signature: 0x%8.8" PRIx32 ":0x%8.8" PRIx32 ":0x%8.8" PRIx32 ":0x%8.8" PRIx32, @@ -595,11 +595,11 @@ COMMAND_HANDLER(lpc2900_handle_password_command) lpc2900_info->risky = !strcmp(CMD_ARGV[1], ISS_PASSWORD); if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Wrong password (use '%s')", ISS_PASSWORD); + command_print(CMD, "Wrong password (use '%s')", ISS_PASSWORD); return ERROR_COMMAND_ARGUMENT_INVALID; } - command_print(CMD_CTX, + command_print(CMD, "Potentially dangerous operation allowed in next command!"); return ERROR_OK; @@ -622,7 +622,7 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command) /* Check if command execution is allowed. */ if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Command execution not allowed!"); + command_print(CMD, "Command execution not allowed!"); return ERROR_COMMAND_ARGUMENT_INVALID; } lpc2900_info->risky = 0; @@ -721,7 +721,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) /* Check if command execution is allowed. */ if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Command execution not allowed! " + command_print(CMD, "Command execution not allowed! " "(use 'password' command first)"); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -734,7 +734,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) if ((first >= bank->num_sectors) || (last >= bank->num_sectors) || (first > last)) { - command_print(CMD_CTX, "Illegal sector range"); + command_print(CMD, "Illegal sector range"); return ERROR_COMMAND_ARGUMENT_INVALID; } @@ -773,7 +773,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_sector_command) } } - command_print(CMD_CTX, + command_print(CMD, "Sectors security will become effective after next power cycle"); /* Update the sector security status */ @@ -803,7 +803,7 @@ COMMAND_HANDLER(lpc2900_handle_secure_jtag_command) /* Check if command execution is allowed. */ if (!lpc2900_info->risky) { - command_print(CMD_CTX, "Command execution not allowed! " + command_print(CMD, "Command execution not allowed! " "(use 'password' command first)"); return ERROR_COMMAND_ARGUMENT_INVALID; } diff --git a/src/flash/nor/max32xxx.c b/src/flash/nor/max32xxx.c index f51f6e2..3bf4b22 100644 --- a/src/flash/nor/max32xxx.c +++ b/src/flash/nor/max32xxx.c @@ -772,7 +772,7 @@ COMMAND_HANDLER(max32xxx_handle_mass_erase_command) int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank); if (CMD_ARGC < 1) { - command_print(CMD_CTX, "max32xxx mass_erase <bank>"); + command_print(CMD, "max32xxx mass_erase <bank>"); return ERROR_OK; } @@ -784,9 +784,9 @@ COMMAND_HANDLER(max32xxx_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "max32xxx mass erase complete"); + command_print(CMD, "max32xxx mass erase complete"); } else - command_print(CMD_CTX, "max32xxx mass erase failed"); + command_print(CMD, "max32xxx mass erase failed"); return ERROR_OK; } @@ -799,7 +799,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) uint32_t addr, len; if (CMD_ARGC != 3) { - command_print(CMD_CTX, "max32xxx protection_set <bank> <addr> <size>"); + command_print(CMD, "max32xxx protection_set <bank> <addr> <size>"); return ERROR_OK; } @@ -811,7 +811,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) /* Convert the range to the page numbers */ if (1 != sscanf(CMD_ARGV[1], "0x%"SCNx32, &addr)) { LOG_WARNING("Error parsing address"); - command_print(CMD_CTX, "max32xxx protection_set <bank> <addr> <size>"); + command_print(CMD, "max32xxx protection_set <bank> <addr> <size>"); return ERROR_FAIL; } /* Mask off the top portion on the address */ @@ -819,7 +819,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) if (1 != sscanf(CMD_ARGV[2], "0x%"SCNx32, &len)) { LOG_WARNING("Error parsing length"); - command_print(CMD_CTX, "max32xxx protection_set <bank> <addr> <size>"); + command_print(CMD, "max32xxx protection_set <bank> <addr> <size>"); return ERROR_FAIL; } @@ -840,9 +840,9 @@ COMMAND_HANDLER(max32xxx_handle_protection_set_command) len = addr + (len / info->sector_size) - 1; if (max32xxx_protect(bank, 1, addr, len) == ERROR_OK) - command_print(CMD_CTX, "max32xxx protection set complete"); + command_print(CMD, "max32xxx protection set complete"); else - command_print(CMD_CTX, "max32xxx protection set failed"); + command_print(CMD, "max32xxx protection set failed"); return ERROR_OK; } @@ -855,7 +855,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) uint32_t addr, len; if (CMD_ARGC != 3) { - command_print(CMD_CTX, "max32xxx protection_clr <bank> <addr> <size>"); + command_print(CMD, "max32xxx protection_clr <bank> <addr> <size>"); return ERROR_OK; } @@ -867,7 +867,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) /* Convert the range to the page numbers */ if (1 != sscanf(CMD_ARGV[1], "0x%"SCNx32, &addr)) { LOG_WARNING("Error parsing address"); - command_print(CMD_CTX, "max32xxx protection_clr <bank> <addr> <size>"); + command_print(CMD, "max32xxx protection_clr <bank> <addr> <size>"); return ERROR_FAIL; } /* Mask off the top portion on the address */ @@ -875,7 +875,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) if (1 != sscanf(CMD_ARGV[2], "0x%"SCNx32, &len)) { LOG_WARNING("Error parsing length"); - command_print(CMD_CTX, "max32xxx protection_clr <bank> <addr> <size>"); + command_print(CMD, "max32xxx protection_clr <bank> <addr> <size>"); return ERROR_FAIL; } @@ -896,9 +896,9 @@ COMMAND_HANDLER(max32xxx_handle_protection_clr_command) len = addr + (len / info->sector_size) - 1; if (max32xxx_protect(bank, 0, addr, len) == ERROR_OK) - command_print(CMD_CTX, "max32xxx protection clear complete"); + command_print(CMD, "max32xxx protection clear complete"); else - command_print(CMD_CTX, "max32xxx protection clear failed"); + command_print(CMD, "max32xxx protection clear failed"); return ERROR_OK; } @@ -911,7 +911,7 @@ COMMAND_HANDLER(max32xxx_handle_protection_check_command) int i; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "max32xxx protection_check <bank>"); + command_print(CMD, "max32xxx protection_check <bank>"); return ERROR_OK; } diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c index b034ee1..62549f2 100644 --- a/src/flash/nor/niietcm4.c +++ b/src/flash/nor/niietcm4.c @@ -425,7 +425,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_read_byte_command) retval = target_read_u32(target, UFMD, &uflash_data); if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "Read userflash %s region:\n" + command_print(CMD, "Read userflash %s region:\n" "address = 0x%04x,\n" "value = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data); return retval; @@ -467,7 +467,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command) int page_num = uflash_addr/USERFLASH_PAGE_SIZE; - command_print(CMD_CTX, "Write userflash %s region:\n" + command_print(CMD, "Write userflash %s region:\n" "address = 0x%04x,\n" "value = 0x%02x.\n" "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data); @@ -483,7 +483,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, page_num, mem_type); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -520,7 +520,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_full_erase_command) retval = niietcm4_uopstatus_check(bank); if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "Userflash full erase done!"); + command_print(CMD, "Userflash full erase done!"); return retval; } @@ -563,7 +563,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_erase_command) return retval; } - command_print(CMD_CTX, "Erase %s userflash pages %d through %d done!", CMD_ARGV[0], first, last); + command_print(CMD, "Erase %s userflash pages %d through %d done!", CMD_ARGV[0], first, last); return retval; } @@ -621,9 +621,9 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_check_command) return retval; if (uflash_data & INFOWORD3_LOCK_IFB_UF) - command_print(CMD_CTX, "All sectors of info userflash are not protected!"); + command_print(CMD, "All sectors of info userflash are not protected!"); else - command_print(CMD_CTX, "All sectors of info userflash are protected!"); + command_print(CMD, "All sectors of info userflash are protected!"); } else { uflash_addr = UF_LOCK_ADDR; uflash_cmd = UFMC_MAGIC_KEY | UFMC_READ_IFB; @@ -645,10 +645,10 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_check_command) for (j = 0; j < 8; j++) { if (uflash_data & 0x1) - command_print(CMD_CTX, "Userflash sector #%03d: 0x%04x (0x100) is not protected!", + command_print(CMD, "Userflash sector #%03d: 0x%04x (0x100) is not protected!", i*8+j, (i*8+j)*USERFLASH_PAGE_SIZE); else - command_print(CMD_CTX, "Userflash sector #%03d: 0x%04x (0x100) is protected!", + command_print(CMD, "Userflash sector #%03d: 0x%04x (0x100) is protected!", i*8+j, (i*8+j)*USERFLASH_PAGE_SIZE); uflash_data = uflash_data >> 1; } @@ -693,11 +693,11 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_command) int set; if (strcmp("on", CMD_ARGV[3]) == 0) { - command_print(CMD_CTX, "Try to enable %s userflash sectors %d through %d protection. Please wait ... ", + command_print(CMD, "Try to enable %s userflash sectors %d through %d protection. Please wait ... ", CMD_ARGV[0], first, last); set = 1; } else if (strcmp("off", CMD_ARGV[3]) == 0) { - command_print(CMD_CTX, "Try to disable %s userflash sectors %d through %d protection. Please wait ... ", + command_print(CMD, "Try to disable %s userflash sectors %d through %d protection. Please wait ... ", CMD_ARGV[0], first, last); set = 0; } else @@ -707,7 +707,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -733,10 +733,10 @@ COMMAND_HANDLER(niietcm4_handle_bflash_info_remap_command) int set; if (strcmp("on", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to enable bootflash info region remap. Please wait ..."); + command_print(CMD, "Try to enable bootflash info region remap. Please wait ..."); set = 1; } else if (strcmp("off", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to disable bootflash info region remap. Please wait ..."); + command_print(CMD, "Try to disable bootflash info region remap. Please wait ..."); set = 0; } else return ERROR_COMMAND_SYNTAX_ERROR; @@ -756,7 +756,7 @@ COMMAND_HANDLER(niietcm4_handle_bflash_info_remap_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, 0, 1); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -814,7 +814,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command) else return ERROR_COMMAND_SYNTAX_ERROR; - command_print(CMD_CTX, "Try to configure external memory boot interface:\n" + command_print(CMD, "Try to configure external memory boot interface:\n" "port = %s\n" "pin = %s\n" "func = %s\n" @@ -833,7 +833,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, 0, 1); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -861,10 +861,10 @@ COMMAND_HANDLER(niietcm4_handle_extmem_boot_command) int set; if (strcmp("on", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to enable boot from external memory. Please wait ..."); + command_print(CMD, "Try to enable boot from external memory. Please wait ..."); set = 1; } else if (strcmp("off", CMD_ARGV[0]) == 0) { - command_print(CMD_CTX, "Try to disable boot from external memory. Please wait ..."); + command_print(CMD, "Try to disable boot from external memory. Please wait ..."); set = 0; } else return ERROR_COMMAND_SYNTAX_ERROR; @@ -884,7 +884,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_boot_command) /* write dump to userflash */ niietcm4_load_uflash_page(bank, uflash_dump, 0, 1); - command_print(CMD_CTX, "done!"); + command_print(CMD, "done!"); return retval; } @@ -900,7 +900,7 @@ COMMAND_HANDLER(niietcm4_handle_service_mode_erase_command) return retval; struct target *target = bank->target; - command_print(CMD_CTX, "Try to perform service mode erase. Please wait ..."); + command_print(CMD, "Try to perform service mode erase. Please wait ..."); retval = target_write_u32(target, SERVICE_MODE_ERASE_ADDR, 1); if (retval != ERROR_OK) @@ -923,7 +923,7 @@ COMMAND_HANDLER(niietcm4_handle_service_mode_erase_command) } busy_sleep(1); /* can use busy sleep for short times. */ } - command_print(CMD_CTX, "done! All data erased."); + command_print(CMD, "done! All data erased."); return retval; } @@ -938,7 +938,7 @@ COMMAND_HANDLER(niietcm4_handle_driver_info_command) if (retval != ERROR_OK) return retval; - command_print(CMD_CTX, "niietcm4 flash driver\n" + command_print(CMD, "niietcm4 flash driver\n" "version: %d.%d\n" "author: Bogdan Kolbov\n" "mail: kolbov@niiet.ru", diff --git a/src/flash/nor/numicro.c b/src/flash/nor/numicro.c index 47f9a88..c62af04 100644 --- a/src/flash/nor/numicro.c +++ b/src/flash/nor/numicro.c @@ -1827,11 +1827,11 @@ COMMAND_HANDLER(numicro_handle_chip_erase_command) retval = numicro_fmc_cmd(target, ISPCMD_CHIPERASE, 0, 0, &rdat); if (retval != ERROR_OK) { - command_print(CMD_CTX, "numicro chip_erase failed"); + command_print(CMD, "numicro chip_erase failed"); return retval; } - command_print(CMD_CTX, "numicro chip_erase complete"); + command_print(CMD, "numicro chip_erase complete"); return ERROR_OK; } diff --git a/src/flash/nor/pic32mx.c b/src/flash/nor/pic32mx.c index 5ad4cb7..81ffdc4 100644 --- a/src/flash/nor/pic32mx.c +++ b/src/flash/nor/pic32mx.c @@ -858,7 +858,7 @@ COMMAND_HANDLER(pic32mx_handle_pgm_word_command) return retval; if (address < bank->base || address >= (bank->base + bank->size)) { - command_print(CMD_CTX, "flash address '%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "flash address '%s' is out of bounds", CMD_ARGV[0]); return ERROR_OK; } @@ -870,9 +870,9 @@ COMMAND_HANDLER(pic32mx_handle_pgm_word_command) res = ERROR_FLASH_OPERATION_FAILED; if (res == ERROR_OK) - command_print(CMD_CTX, "pic32mx pgm word complete"); + command_print(CMD, "pic32mx pgm word complete"); else - command_print(CMD_CTX, "pic32mx pgm word failed (status = 0x%x)", status); + command_print(CMD, "pic32mx pgm word failed (status = 0x%x)", status); return ERROR_OK; } @@ -885,7 +885,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) int timeout = 10; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "pic32mx unlock <bank>"); + command_print(CMD, "pic32mx unlock <bank>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -907,7 +907,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) mips_ejtag_drscan_8(ejtag_info, &mchip_cmd); if (mchip_cmd & (1 << 7)) { /* device is not locked */ - command_print(CMD_CTX, "pic32mx is already unlocked, erasing anyway"); + command_print(CMD, "pic32mx is already unlocked, erasing anyway"); } /* unlock/erase device */ @@ -931,7 +931,7 @@ COMMAND_HANDLER(pic32mx_handle_unlock_command) /* select ejtag tap */ mips_ejtag_set_instr(ejtag_info, MTAP_SW_ETAP); - command_print(CMD_CTX, "pic32mx unlocked.\n" + command_print(CMD, "pic32mx unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); diff --git a/src/flash/nor/psoc4.c b/src/flash/nor/psoc4.c index 0058f2d..1eb6a26 100644 --- a/src/flash/nor/psoc4.c +++ b/src/flash/nor/psoc4.c @@ -913,9 +913,9 @@ COMMAND_HANDLER(psoc4_handle_mass_erase_command) retval = psoc4_mass_erase(bank); if (retval == ERROR_OK) - command_print(CMD_CTX, "psoc mass erase complete"); + command_print(CMD, "psoc mass erase complete"); else - command_print(CMD_CTX, "psoc mass erase failed"); + command_print(CMD, "psoc mass erase failed"); return retval; } diff --git a/src/flash/nor/psoc5lp.c b/src/flash/nor/psoc5lp.c index 66e2b07..7f801f2 100644 --- a/src/flash/nor/psoc5lp.c +++ b/src/flash/nor/psoc5lp.c @@ -1501,9 +1501,9 @@ COMMAND_HANDLER(psoc5lp_handle_mass_erase_command) retval = psoc5lp_spc_erase_all(bank->target); if (retval == ERROR_OK) - command_print(CMD_CTX, "PSoC 5LP erase succeeded"); + command_print(CMD, "PSoC 5LP erase succeeded"); else - command_print(CMD_CTX, "PSoC 5LP erase failed"); + command_print(CMD, "PSoC 5LP erase failed"); return retval; } diff --git a/src/flash/nor/stellaris.c b/src/flash/nor/stellaris.c index 6b6f6e8..9c4c4bc 100644 --- a/src/flash/nor/stellaris.c +++ b/src/flash/nor/stellaris.c @@ -1336,9 +1336,9 @@ COMMAND_HANDLER(stellaris_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stellaris mass erase complete"); + command_print(CMD, "stellaris mass erase complete"); } else - command_print(CMD_CTX, "stellaris mass erase failed"); + command_print(CMD, "stellaris mass erase failed"); return ERROR_OK; } diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c index d5d59c6..cf10e37 100644 --- a/src/flash/nor/stm32f1x.c +++ b/src/flash/nor/stm32f1x.c @@ -1186,7 +1186,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) return retval; if (stm32x_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to erase options"); + command_print(CMD, "stm32x failed to erase options"); return ERROR_OK; } @@ -1194,11 +1194,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command) stm32x_info->option_bytes.rdp = 0; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to lock device"); + command_print(CMD, "stm32x failed to lock device"); return ERROR_OK; } - command_print(CMD_CTX, "stm32x locked"); + command_print(CMD, "stm32x locked"); return ERROR_OK; } @@ -1227,16 +1227,16 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) return retval; if (stm32x_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to erase options"); + command_print(CMD, "stm32x failed to erase options"); return ERROR_OK; } if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to unlock device"); + command_print(CMD, "stm32x failed to unlock device"); return ERROR_OK; } - command_print(CMD_CTX, "stm32x unlocked.\n" + command_print(CMD, "stm32x unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -1281,30 +1281,30 @@ COMMAND_HANDLER(stm32x_handle_options_read_command) return retval; if (optionbyte & (1 << OPT_ERROR)) - command_print(CMD_CTX, "option byte complement error"); + command_print(CMD, "option byte complement error"); - command_print(CMD_CTX, "option byte register = 0x%" PRIx32 "", optionbyte); - command_print(CMD_CTX, "write protection register = 0x%" PRIx32 "", protection); + command_print(CMD, "option byte register = 0x%" PRIx32 "", optionbyte); + command_print(CMD, "write protection register = 0x%" PRIx32 "", protection); - command_print(CMD_CTX, "read protection: %s", + command_print(CMD, "read protection: %s", (optionbyte & (1 << OPT_READOUT)) ? "on" : "off"); /* user option bytes are offset depending on variant */ optionbyte >>= stm32x_info->option_offset; - command_print(CMD_CTX, "watchdog: %sware", + command_print(CMD, "watchdog: %sware", (optionbyte & (1 << OPT_RDWDGSW)) ? "soft" : "hard"); - command_print(CMD_CTX, "stop mode: %sreset generated upon entry", + command_print(CMD, "stop mode: %sreset generated upon entry", (optionbyte & (1 << OPT_RDRSTSTOP)) ? "no " : ""); - command_print(CMD_CTX, "standby mode: %sreset generated upon entry", + command_print(CMD, "standby mode: %sreset generated upon entry", (optionbyte & (1 << OPT_RDRSTSTDBY)) ? "no " : ""); if (stm32x_info->has_dual_banks) - command_print(CMD_CTX, "boot: bank %d", (optionbyte & (1 << OPT_BFB2)) ? 0 : 1); + command_print(CMD, "boot: bank %d", (optionbyte & (1 << OPT_BFB2)) ? 0 : 1); - command_print(CMD_CTX, "user data = 0x%02" PRIx16 "", user_data); + command_print(CMD, "user data = 0x%02" PRIx16 "", user_data); return ERROR_OK; } @@ -1383,7 +1383,7 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) } if (stm32x_erase_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to erase options"); + command_print(CMD, "stm32x failed to erase options"); return ERROR_OK; } @@ -1391,11 +1391,11 @@ COMMAND_HANDLER(stm32x_handle_options_write_command) stm32x_info->option_bytes.data = useropt; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32x failed to write options"); + command_print(CMD, "stm32x failed to write options"); return ERROR_OK; } - command_print(CMD_CTX, "stm32x write options complete.\n" + command_print(CMD, "stm32x write options complete.\n" "INFO: %spower cycle is required " "for the new settings to take effect.", stm32x_info->can_load_options @@ -1504,9 +1504,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32x mass erase complete"); + command_print(CMD, "stm32x mass erase complete"); } else - command_print(CMD_CTX, "stm32x mass erase failed"); + command_print(CMD, "stm32x mass erase failed"); return retval; } diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c index 23f0030..b49e76e 100644 --- a/src/flash/nor/stm32f2x.c +++ b/src/flash/nor/stm32f2x.c @@ -1415,7 +1415,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", bank->driver->name); + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -1423,11 +1423,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command) stm32x_info->option_bytes.RDP = 0; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to lock device", bank->driver->name); + command_print(CMD, "%s failed to lock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s locked", bank->driver->name); + command_print(CMD, "%s locked", bank->driver->name); return ERROR_OK; } @@ -1454,7 +1454,7 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", bank->driver->name); + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -1466,11 +1466,11 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) } if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name); + command_print(CMD, "%s failed to unlock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s unlocked.\n" + command_print(CMD, "%s unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect.", bank->driver->name); @@ -1525,7 +1525,7 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) int i; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32x mass_erase <bank>"); + command_print(CMD, "stm32x mass_erase <bank>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1540,9 +1540,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32x mass erase complete"); + command_print(CMD, "stm32x mass erase complete"); } else { - command_print(CMD_CTX, "stm32x mass erase failed"); + command_print(CMD, "stm32x mass erase failed"); } return retval; @@ -1555,7 +1555,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_read_command) struct stm32x_flash_bank *stm32x_info = NULL; if (CMD_ARGC != 1) { - command_print(CMD_CTX, "stm32f2x options_read <bank>"); + command_print(CMD, "stm32f2x options_read <bank>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1572,20 +1572,20 @@ COMMAND_HANDLER(stm32f2x_handle_options_read_command) if (stm32x_info->has_boot_addr) { uint32_t boot_addr = stm32x_info->option_bytes.boot_addr; - command_print(CMD_CTX, "stm32f2x user_options 0x%03X," + command_print(CMD, "stm32f2x user_options 0x%03X," " boot_add0 0x%04X, boot_add1 0x%04X", stm32x_info->option_bytes.user_options, boot_addr & 0xffff, (boot_addr & 0xffff0000) >> 16); if (stm32x_info->has_optcr2_pcrop) { - command_print(CMD_CTX, "stm32f2x optcr2_pcrop 0x%08X", + command_print(CMD, "stm32f2x optcr2_pcrop 0x%08X", stm32x_info->option_bytes.optcr2_pcrop); } } else { - command_print(CMD_CTX, "stm32f2x user_options 0x%03X", + command_print(CMD, "stm32f2x user_options 0x%03X", stm32x_info->option_bytes.user_options); } } else { - command_print(CMD_CTX, "stm32f2x user_options 0x%02X", + command_print(CMD, "stm32f2x user_options 0x%02X", stm32x_info->option_bytes.user_options); } @@ -1601,7 +1601,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) uint16_t user_options, boot_addr0, boot_addr1, options_mask; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32f2x options_write <bank> ..."); + command_print(CMD, "stm32f2x options_write <bank> ..."); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1616,7 +1616,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) stm32x_info = bank->driver_priv; if (stm32x_info->has_boot_addr) { if (CMD_ARGC != 4) { - command_print(CMD_CTX, "stm32f2x options_write <bank> <user_options>" + command_print(CMD, "stm32f2x options_write <bank> <user_options>" " <boot_addr0> <boot_addr1>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1625,7 +1625,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) stm32x_info->option_bytes.boot_addr = boot_addr0 | (((uint32_t) boot_addr1) << 16); } else { if (CMD_ARGC != 2) { - command_print(CMD_CTX, "stm32f2x options_write <bank> <user_options>"); + command_print(CMD, "stm32f2x options_write <bank> <user_options>"); return ERROR_COMMAND_SYNTAX_ERROR; } } @@ -1634,14 +1634,14 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) options_mask = !stm32x_info->has_extra_options ? ~0xfc : ~(((0xf00 << (stm32x_info->protection_bits - 12)) | 0xff) & 0xffc); if (user_options & options_mask) { - command_print(CMD_CTX, "stm32f2x invalid user_options"); + command_print(CMD, "stm32f2x invalid user_options"); return ERROR_COMMAND_ARGUMENT_INVALID; } stm32x_info->option_bytes.user_options = user_options; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32f2x failed to write options"); + command_print(CMD, "stm32f2x failed to write options"); return ERROR_OK; } @@ -1649,7 +1649,7 @@ COMMAND_HANDLER(stm32f2x_handle_options_write_command) /* ... and reprogramming of whole flash */ stm32x_info->probed = false; - command_print(CMD_CTX, "stm32f2x write options complete.\n" + command_print(CMD, "stm32f2x write options complete.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); return retval; @@ -1663,7 +1663,7 @@ COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command) uint32_t optcr2_pcrop; if (CMD_ARGC != 2) { - command_print(CMD_CTX, "stm32f2x optcr2_write <bank> <optcr2_value>"); + command_print(CMD, "stm32f2x optcr2_write <bank> <optcr2_value>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1673,11 +1673,11 @@ COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command) stm32x_info = bank->driver_priv; if (!stm32x_info->has_optcr2_pcrop) { - command_print(CMD_CTX, "no optcr2 register"); + command_print(CMD, "no optcr2 register"); return ERROR_COMMAND_ARGUMENT_INVALID; } - command_print(CMD_CTX, "INFO: To disable PCROP, set PCROP_RDP" + command_print(CMD, "INFO: To disable PCROP, set PCROP_RDP" " with PCROPi bits STILL SET, then\nlock device and" " finally unlock it. Clears PCROP and mass erases flash."); @@ -1689,18 +1689,18 @@ COMMAND_HANDLER(stm32f2x_handle_optcr2_write_command) stm32x_info->option_bytes.optcr2_pcrop = optcr2_pcrop; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "stm32f2x failed to write options"); + command_print(CMD, "stm32f2x failed to write options"); return ERROR_OK; } - command_print(CMD_CTX, "stm32f2x optcr2_write complete."); + command_print(CMD, "stm32f2x optcr2_write complete."); return retval; } COMMAND_HANDLER(stm32x_handle_otp_command) { if (CMD_ARGC < 2) { - command_print(CMD_CTX, "stm32x otp <bank> (enable|disable|show)"); + command_print(CMD, "stm32x otp <bank> (enable|disable|show)"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1714,7 +1714,7 @@ COMMAND_HANDLER(stm32x_handle_otp_command) } else if (strcmp(CMD_ARGV[1], "disable") == 0) { stm32x_otp_disable(bank); } else if (strcmp(CMD_ARGV[1], "show") == 0) { - command_print(CMD_CTX, + command_print(CMD, "OTP memory bank #%d is %s for write commands.", bank->bank_number, stm32x_is_otp_unlocked(bank) ? "enabled" : "disabled"); @@ -1722,7 +1722,7 @@ COMMAND_HANDLER(stm32x_handle_otp_command) return ERROR_COMMAND_SYNTAX_ERROR; } } else { - command_print(CMD_CTX, "Failed: not an OTP bank."); + command_print(CMD, "Failed: not an OTP bank."); } return retval; diff --git a/src/flash/nor/stm32h7x.c b/src/flash/nor/stm32h7x.c index 90bc8f3..cb96cf2 100644 --- a/src/flash/nor/stm32h7x.c +++ b/src/flash/nor/stm32h7x.c @@ -952,7 +952,7 @@ COMMAND_HANDLER(stm32x_handle_lock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -960,11 +960,11 @@ COMMAND_HANDLER(stm32x_handle_lock_command) stm32x_info->option_bytes.RDP = 0; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to lock device", + command_print(CMD, "%s failed to lock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s locked", bank->driver->name); + command_print(CMD, "%s locked", bank->driver->name); return ERROR_OK; } @@ -998,7 +998,7 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) } if (stm32x_read_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to read options", bank->driver->name); + command_print(CMD, "%s failed to read options", bank->driver->name); return ERROR_OK; } @@ -1007,10 +1007,10 @@ COMMAND_HANDLER(stm32x_handle_unlock_command) stm32x_info->option_bytes.RDP = 0xAA; if (stm32x_write_options(bank) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name); + command_print(CMD, "%s failed to unlock device", bank->driver->name); return ERROR_OK; } - command_print(CMD_CTX, "%s unlocked.\n", bank->driver->name); + command_print(CMD, "%s unlocked.\n", bank->driver->name); return ERROR_OK; } @@ -1056,7 +1056,7 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) int i; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32h7x mass_erase <bank>"); + command_print(CMD, "stm32h7x mass_erase <bank>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -1071,9 +1071,9 @@ COMMAND_HANDLER(stm32x_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32h7x mass erase complete"); + command_print(CMD, "stm32h7x mass erase complete"); } else { - command_print(CMD_CTX, "stm32h7x mass erase failed"); + command_print(CMD, "stm32h7x mass erase failed"); } return retval; diff --git a/src/flash/nor/stm32l4x.c b/src/flash/nor/stm32l4x.c index 3d4303b..f680542 100644 --- a/src/flash/nor/stm32l4x.c +++ b/src/flash/nor/stm32l4x.c @@ -835,7 +835,7 @@ COMMAND_HANDLER(stm32l4_handle_mass_erase_command) uint32_t action; if (CMD_ARGC < 1) { - command_print(CMD_CTX, "stm32l4x mass_erase <STM32L4 bank>"); + command_print(CMD, "stm32l4x mass_erase <STM32L4 bank>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -851,9 +851,9 @@ COMMAND_HANDLER(stm32l4_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32l4x mass erase complete"); + command_print(CMD, "stm32l4x mass erase complete"); } else { - command_print(CMD_CTX, "stm32l4x mass erase failed"); + command_print(CMD, "stm32l4x mass erase failed"); } return retval; @@ -862,7 +862,7 @@ COMMAND_HANDLER(stm32l4_handle_mass_erase_command) COMMAND_HANDLER(stm32l4_handle_option_read_command) { if (CMD_ARGC < 2) { - command_print(CMD_CTX, "stm32l4x option_read <STM32L4 bank> <option_reg offset>"); + command_print(CMD, "stm32l4x option_read <STM32L4 bank> <option_reg offset>"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -880,7 +880,7 @@ COMMAND_HANDLER(stm32l4_handle_option_read_command) if (ERROR_OK != retval) return retval; - command_print(CMD_CTX, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value); + command_print(CMD, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value); return retval; } @@ -888,7 +888,7 @@ COMMAND_HANDLER(stm32l4_handle_option_read_command) COMMAND_HANDLER(stm32l4_handle_option_write_command) { if (CMD_ARGC < 3) { - command_print(CMD_CTX, "stm32l4x option_write <STM32L4 bank> <option_reg offset> <value> [mask]"); + command_print(CMD, "stm32l4x option_write <STM32L4 bank> <option_reg offset> <value> [mask]"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -906,7 +906,7 @@ COMMAND_HANDLER(stm32l4_handle_option_write_command) if (CMD_ARGC > 3) mask = strtoul(CMD_ARGV[3], NULL, 16); - command_print(CMD_CTX, "%s Option written.\n" + command_print(CMD, "%s Option written.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect.", bank->driver->name); @@ -937,7 +937,7 @@ COMMAND_HANDLER(stm32l4_handle_option_load_command) /* Write the OBLLAUNCH bit in CR -> Cause device "POR" and option bytes reload */ retval = target_write_u32(target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), FLASH_OBLLAUNCH); - command_print(CMD_CTX, "stm32l4x option load (POR) completed."); + command_print(CMD, "stm32l4x option load (POR) completed."); return retval; } @@ -962,7 +962,7 @@ COMMAND_HANDLER(stm32l4_handle_lock_command) /* set readout protection level 1 by erasing the RDP option byte */ if (stm32l4_write_option(bank, STM32_FLASH_OPTR, 0, 0x000000FF) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to lock device", bank->driver->name); + command_print(CMD, "%s failed to lock device", bank->driver->name); return ERROR_OK; } @@ -989,7 +989,7 @@ COMMAND_HANDLER(stm32l4_handle_unlock_command) } if (stm32l4_write_option(bank, STM32_FLASH_OPTR, RDP_LEVEL_0, 0x000000FF) != ERROR_OK) { - command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name); + command_print(CMD, "%s failed to unlock device", bank->driver->name); return ERROR_OK; } diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c index 2778010..e6473f8 100644 --- a/src/flash/nor/stm32lx.c +++ b/src/flash/nor/stm32lx.c @@ -324,9 +324,9 @@ COMMAND_HANDLER(stm32lx_handle_mass_erase_command) for (i = 0; i < bank->num_sectors; i++) bank->sectors[i].is_erased = 1; - command_print(CMD_CTX, "stm32lx mass erase complete"); + command_print(CMD, "stm32lx mass erase complete"); } else { - command_print(CMD_CTX, "stm32lx mass erase failed"); + command_print(CMD, "stm32lx mass erase failed"); } return retval; @@ -345,9 +345,9 @@ COMMAND_HANDLER(stm32lx_handle_lock_command) retval = stm32lx_lock(bank); if (retval == ERROR_OK) - command_print(CMD_CTX, "STM32Lx locked, takes effect after power cycle."); + command_print(CMD, "STM32Lx locked, takes effect after power cycle."); else - command_print(CMD_CTX, "STM32Lx lock failed"); + command_print(CMD, "STM32Lx lock failed"); return retval; } @@ -365,9 +365,9 @@ COMMAND_HANDLER(stm32lx_handle_unlock_command) retval = stm32lx_unlock(bank); if (retval == ERROR_OK) - command_print(CMD_CTX, "STM32Lx unlocked, takes effect after power cycle."); + command_print(CMD, "STM32Lx unlocked, takes effect after power cycle."); else - command_print(CMD_CTX, "STM32Lx unlock failed"); + command_print(CMD, "STM32Lx unlock failed"); return retval; } diff --git a/src/flash/nor/str9xpec.c b/src/flash/nor/str9xpec.c index 37d8053..6e1ecf3 100644 --- a/src/flash/nor/str9xpec.c +++ b/src/flash/nor/str9xpec.c @@ -746,7 +746,7 @@ COMMAND_HANDLER(str9xpec_handle_part_id_command) idcode = buf_get_u32(buffer, 0, 32); - command_print(CMD_CTX, "str9xpec part id: 0x%8.8" PRIx32 "", idcode); + command_print(CMD, "str9xpec part id: 0x%8.8" PRIx32 "", idcode); free(buffer); @@ -780,33 +780,33 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_read_command) /* boot bank */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1)) - command_print(CMD_CTX, "CS Map: bank1"); + command_print(CMD, "CS Map: bank1"); else - command_print(CMD_CTX, "CS Map: bank0"); + command_print(CMD, "CS Map: bank0"); /* OTP lock */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_OTPBIT, 1)) - command_print(CMD_CTX, "OTP Lock: OTP Locked"); + command_print(CMD, "OTP Lock: OTP Locked"); else - command_print(CMD_CTX, "OTP Lock: OTP Unlocked"); + command_print(CMD, "OTP Lock: OTP Unlocked"); /* LVD Threshold */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1)) - command_print(CMD_CTX, "LVD Threshold: 2.7v"); + command_print(CMD, "LVD Threshold: 2.7v"); else - command_print(CMD_CTX, "LVD Threshold: 2.4v"); + command_print(CMD, "LVD Threshold: 2.4v"); /* LVD reset warning */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1)) - command_print(CMD_CTX, "LVD Reset Warning: VDD or VDDQ Inputs"); + command_print(CMD, "LVD Reset Warning: VDD or VDDQ Inputs"); else - command_print(CMD_CTX, "LVD Reset Warning: VDD Input Only"); + command_print(CMD, "LVD Reset Warning: VDD Input Only"); /* LVD reset select */ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1)) - command_print(CMD_CTX, "LVD Reset Selection: VDD or VDDQ Inputs"); + command_print(CMD, "LVD Reset Selection: VDD or VDDQ Inputs"); else - command_print(CMD_CTX, "LVD Reset Selection: VDD Input Only"); + command_print(CMD, "LVD Reset Selection: VDD Input Only"); return ERROR_OK; } @@ -885,7 +885,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_options_write_command) if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS) return ERROR_FLASH_OPERATION_FAILED; - command_print(CMD_CTX, "str9xpec write options complete.\n" + command_print(CMD, "str9xpec write options complete.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -1017,7 +1017,7 @@ COMMAND_HANDLER(str9xpec_handle_flash_unlock_command) if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS) return ERROR_FLASH_OPERATION_FAILED; - command_print(CMD_CTX, "str9xpec unlocked.\n" + command_print(CMD, "str9xpec unlocked.\n" "INFO: a reset or power cycle is required " "for the new settings to take effect."); @@ -1045,19 +1045,19 @@ COMMAND_HANDLER(str9xpec_handle_flash_enable_turbo_command) tap0 = str9xpec_info->tap; if (tap0 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX, "**STR9FLASH** (tap0) invalid chain?"); + command_print(CMD, "**STR9FLASH** (tap0) invalid chain?"); return ERROR_FAIL; } tap1 = tap0->next_tap; if (tap1 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX, "**STR9FLASH** (tap1) invalid chain?"); + command_print(CMD, "**STR9FLASH** (tap1) invalid chain?"); return ERROR_FAIL; } tap2 = tap1->next_tap; if (tap2 == NULL) { /* things are *WRONG* */ - command_print(CMD_CTX, "**STR9FLASH** (tap2) invalid chain?"); + command_print(CMD, "**STR9FLASH** (tap2) invalid chain?"); return ERROR_FAIL; } diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c index 87d599a..0daa531 100644 --- a/src/flash/nor/tcl.c +++ b/src/flash/nor/tcl.c @@ -111,7 +111,7 @@ COMMAND_HANDLER(handle_flash_info_command) if (retval == ERROR_FLASH_OPER_UNSUPPORTED) LOG_WARNING("Flash protection check is not implemented."); - command_print(CMD_CTX, + command_print(CMD, "#%d : %s at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32 ", buswidth %i, chipwidth %i", p->bank_number, @@ -140,7 +140,7 @@ COMMAND_HANDLER(handle_flash_info_command) else if (!show_sectors || !prot_block_available) protect_state = "protection state unknown"; - command_print(CMD_CTX, + command_print(CMD, "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", j, block_array[j].offset, @@ -152,7 +152,7 @@ COMMAND_HANDLER(handle_flash_info_command) if (p->driver->info != NULL) { retval = p->driver->info(p, buf, sizeof(buf)); if (retval == ERROR_OK) - command_print(CMD_CTX, "%s", buf); + command_print(CMD, "%s", buf); else LOG_ERROR("error retrieving flash info"); } @@ -176,12 +176,12 @@ COMMAND_HANDLER(handle_flash_probe_command) if (p) { retval = p->driver->probe(p); if (retval == ERROR_OK) - command_print(CMD_CTX, + command_print(CMD, "flash '%s' found at " TARGET_ADDR_FMT, p->driver->name, p->base); } else { - command_print(CMD_CTX, "flash bank '#%s' is out of bounds", CMD_ARGV[0]); + command_print(CMD, "flash bank '#%s' is out of bounds", CMD_ARGV[0]); retval = ERROR_FAIL; } @@ -202,9 +202,9 @@ COMMAND_HANDLER(handle_flash_erase_check_command) int j; retval = p->driver->erase_check(p); if (retval == ERROR_OK) - command_print(CMD_CTX, "successfully checked erase state"); + command_print(CMD, "successfully checked erase state"); else { - command_print(CMD_CTX, + command_print(CMD, "unknown error when checking erase state of flash bank #%s at " TARGET_ADDR_FMT, CMD_ARGV[0], @@ -222,7 +222,7 @@ COMMAND_HANDLER(handle_flash_erase_check_command) erase_state = "erase state unknown"; blank = false; - command_print(CMD_CTX, + command_print(CMD, "\t#%3i: 0x%8.8" PRIx32 " (0x%" PRIx32 " %" PRIi32 "kB) %s", j, p->sectors[j].offset, @@ -232,7 +232,7 @@ COMMAND_HANDLER(handle_flash_erase_check_command) } if (blank) - command_print(CMD_CTX, "\tBank is erased"); + command_print(CMD, "\tBank is erased"); return retval; } @@ -267,7 +267,7 @@ COMMAND_HANDLER(handle_flash_erase_address_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length); if (length <= 0) { - command_print(CMD_CTX, "Length must be >0"); + command_print(CMD, "Length must be >0"); return ERROR_COMMAND_SYNTAX_ERROR; } @@ -289,7 +289,7 @@ COMMAND_HANDLER(handle_flash_erase_address_command) retval = flash_erase_address_range(target, do_pad, address, length); if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "erased address " TARGET_ADDR_FMT " (length %" + command_print(CMD, "erased address " TARGET_ADDR_FMT " (length %" PRIi32 ")" " in %fs (%0.3f KiB/s)", address, length, duration_elapsed(&bench), duration_kbps(&bench, length)); @@ -320,13 +320,13 @@ COMMAND_HANDLER(handle_flash_erase_command) COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], last); if (!(first <= last)) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "first sector must be <= last"); return ERROR_FAIL; } if (!(last <= (uint32_t)(p->num_sectors - 1))) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "last sector must be <= %" PRIu32, p->num_sectors - 1); return ERROR_FAIL; @@ -338,7 +338,7 @@ COMMAND_HANDLER(handle_flash_erase_command) retval = flash_driver_erase(p, first, last); if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "erased sectors %" PRIu32 " " + command_print(CMD, "erased sectors %" PRIu32 " " "through %" PRIu32 " on flash bank %d " "in %fs", first, last, p->bank_number, duration_elapsed(&bench)); } @@ -377,14 +377,14 @@ COMMAND_HANDLER(handle_flash_protect_command) COMMAND_PARSE_ON_OFF(CMD_ARGV[3], set); if (!(first <= last)) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "first %s must be <= last", (p->num_prot_blocks) ? "block" : "sector"); return ERROR_FAIL; } if (!(last <= (uint32_t)(num_blocks - 1))) { - command_print(CMD_CTX, "ERROR: " + command_print(CMD, "ERROR: " "last %s must be <= %" PRIu32, (p->num_prot_blocks) ? "block" : "sector", num_blocks - 1); @@ -393,7 +393,7 @@ COMMAND_HANDLER(handle_flash_protect_command) retval = flash_driver_protect(p, set, first, last); if (retval == ERROR_OK) { - command_print(CMD_CTX, "%s protection for %s %" PRIu32 + command_print(CMD, "%s protection for %s %" PRIu32 " through %" PRIu32 " on flash bank %d", (set) ? "set" : "cleared", (p->num_prot_blocks) ? "blocks" : "sectors", @@ -421,12 +421,12 @@ COMMAND_HANDLER(handle_flash_write_image_command) auto_erase = 1; CMD_ARGV++; CMD_ARGC--; - command_print(CMD_CTX, "auto erase enabled"); + command_print(CMD, "auto erase enabled"); } else if (strcmp(CMD_ARGV[0], "unlock") == 0) { auto_unlock = true; CMD_ARGV++; CMD_ARGC--; - command_print(CMD_CTX, "auto unlock enabled"); + command_print(CMD, "auto unlock enabled"); } else break; } @@ -463,7 +463,7 @@ COMMAND_HANDLER(handle_flash_write_image_command) } if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "wrote %" PRIu32 " bytes from file %s " + command_print(CMD, "wrote %" PRIu32 " bytes from file %s " "in %fs (%0.3f KiB/s)", written, CMD_ARGV[0], duration_elapsed(&bench), duration_kbps(&bench, written)); } @@ -602,7 +602,7 @@ COMMAND_HANDLER(handle_flash_fill_command) } if ((retval == ERROR_OK) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "wrote %" PRIu32 " bytes to " TARGET_ADDR_FMT + command_print(CMD, "wrote %" PRIu32 " bytes to " TARGET_ADDR_FMT " in %fs (%0.3f KiB/s)", size_bytes, address, duration_elapsed(&bench), duration_kbps(&bench, size_bytes)); } @@ -716,7 +716,7 @@ COMMAND_HANDLER(handle_flash_write_bank_command) free(buffer); if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) { - command_print(CMD_CTX, "wrote %zu bytes from file %s to flash bank %u" + command_print(CMD, "wrote %zu bytes from file %s to flash bank %u" " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", length, CMD_ARGV[1], bank->bank_number, offset, duration_elapsed(&bench), duration_kbps(&bench, length)); @@ -798,7 +798,7 @@ COMMAND_HANDLER(handle_flash_read_bank_command) } if (duration_measure(&bench) == ERROR_OK) - command_print(CMD_CTX, "wrote %zd bytes to file %s from flash bank %u" + command_print(CMD, "wrote %zd bytes to file %s from flash bank %u" " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", written, CMD_ARGV[1], p->bank_number, offset, duration_elapsed(&bench), duration_kbps(&bench, written)); @@ -900,23 +900,23 @@ COMMAND_HANDLER(handle_flash_verify_bank_command) } if (duration_measure(&bench) == ERROR_OK) - command_print(CMD_CTX, "read %zd bytes from file %s and flash bank %u" + command_print(CMD, "read %zd bytes from file %s and flash bank %u" " at offset 0x%8.8" PRIx32 " in %fs (%0.3f KiB/s)", length, CMD_ARGV[1], p->bank_number, offset, duration_elapsed(&bench), duration_kbps(&bench, length)); differ = memcmp(buffer_file, buffer_flash, length); - command_print(CMD_CTX, "contents %s", differ ? "differ" : "match"); + command_print(CMD, "contents %s", differ ? "differ" : "match"); if (differ) { uint32_t t; int diffs = 0; for (t = 0; t < length; t++) { if (buffer_flash[t] == buffer_file[t]) continue; - command_print(CMD_CTX, "diff %d address 0x%08x. Was 0x%02x instead of 0x%02x", + command_print(CMD, "diff %d address 0x%08x. Was 0x%02x instead of 0x%02x", diffs, t + offset, buffer_flash[t], buffer_file[t]); if (diffs++ >= 127) { - command_print(CMD_CTX, "More than 128 errors, the rest are not printed."); + command_print(CMD, "More than 128 errors, the rest are not printed."); break; } keep_alive(); @@ -952,7 +952,7 @@ COMMAND_HANDLER(handle_flash_padded_value_command) COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], p->default_padded_value); - command_print(CMD_CTX, "Default padded value set to 0x%" PRIx8 " for flash bank %u", \ + command_print(CMD, "Default padded value set to 0x%" PRIx8 " for flash bank %u", \ p->default_padded_value, p->bank_number); return retval; diff --git a/src/flash/nor/tms470.c b/src/flash/nor/tms470.c index 195d1ae..90557b8 100644 --- a/src/flash/nor/tms470.c +++ b/src/flash/nor/tms470.c @@ -301,7 +301,7 @@ COMMAND_HANDLER(tms470_handle_flash_keyset_command) int start = (0 == strncmp(CMD_ARGV[i], "0x", 2)) ? 2 : 0; if (1 != sscanf(&CMD_ARGV[i][start], "%" SCNx32 "", &flashKeys[i])) { - command_print(CMD_CTX, "could not process flash key %s", + command_print(CMD, "could not process flash key %s", CMD_ARGV[i]); LOG_ERROR("could not process flash key %s", CMD_ARGV[i]); return ERROR_COMMAND_SYNTAX_ERROR; @@ -310,19 +310,19 @@ COMMAND_HANDLER(tms470_handle_flash_keyset_command) keysSet = 1; } else if (CMD_ARGC != 0) { - command_print(CMD_CTX, "tms470 flash_keyset <key0> <key1> <key2> <key3>"); + command_print(CMD, "tms470 flash_keyset <key0> <key1> <key2> <key3>"); return ERROR_COMMAND_SYNTAX_ERROR; } if (keysSet) { - command_print(CMD_CTX, + command_print(CMD, "using flash keys 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 ", 0x%08" PRIx32 "", flashKeys[0], flashKeys[1], flashKeys[2], flashKeys[3]); } else - command_print(CMD_CTX, "flash keys not set"); + command_print(CMD, "flash keys not set"); return ERROR_OK; } @@ -352,12 +352,12 @@ COMMAND_HANDLER(tms470_handle_osc_megahertz_command) if (oscMHz <= 0) { LOG_ERROR("osc_megahertz must be positive and non-zero!"); - command_print(CMD_CTX, "osc_megahertz must be positive and non-zero!"); + command_print(CMD, "osc_megahertz must be positive and non-zero!"); oscMHz = 12; return ERROR_COMMAND_SYNTAX_ERROR; } - command_print(CMD_CTX, "osc_megahertz=%d", oscMHz); + command_print(CMD, "osc_megahertz=%d", oscMHz); return ERROR_OK; } @@ -375,7 +375,7 @@ COMMAND_HANDLER(tms470_handle_plldis_command) plldis = plldis ? 1 : 0; } - command_print(CMD_CTX, "plldis=%d", plldis); + command_print(CMD, "plldis=%d", plldis); return ERROR_OK; } diff --git a/src/flash/nor/xmc4xxx.c b/src/flash/nor/xmc4xxx.c index d85be62..d6a1ad4 100644 --- a/src/flash/nor/xmc4xxx.c +++ b/src/flash/nor/xmc4xxx.c @@ -1284,9 +1284,9 @@ COMMAND_HANDLER(xmc4xxx_handle_flash_password_command) fb->pw_set = true; - command_print(CMD_CTX, "XMC4xxx flash passwords set to:\n"); - command_print(CMD_CTX, "-0x%08"PRIx32"\n", fb->pw1); - command_print(CMD_CTX, "-0x%08"PRIx32"\n", fb->pw2); + command_print(CMD, "XMC4xxx flash passwords set to:\n"); + command_print(CMD, "-0x%08"PRIx32"\n", fb->pw1); + command_print(CMD, "-0x%08"PRIx32"\n", fb->pw2); return ERROR_OK; } |