diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/manual/jtag/drivers/remote_bitbang.txt | 9 | ||||
| -rw-r--r-- | doc/openocd.texi | 18 |
2 files changed, 25 insertions, 2 deletions
diff --git a/doc/manual/jtag/drivers/remote_bitbang.txt b/doc/manual/jtag/drivers/remote_bitbang.txt index 94d6038..8316cb0 100644 --- a/doc/manual/jtag/drivers/remote_bitbang.txt +++ b/doc/manual/jtag/drivers/remote_bitbang.txt @@ -77,7 +77,12 @@ The read responses are encoded in ASCII as either digit 0 or 1. If the use_remote_sleep option is set to 'yes', two additional requests may be sent: - D - Sleep for 1 millisecond - d - Sleep for 1 microsecond + Z - Sleep for 1 millisecond + z - Sleep for 1 microsecond + +NOTE: Previously these were specified as 'D' and 'd', which conflicts with the +"SWD write 0 0" command defined above. Adapters that implement Dd for remote +sleep must be updated to work with Zz. + */ diff --git a/doc/openocd.texi b/doc/openocd.texi index 832ec77..47879cc 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6805,6 +6805,24 @@ Note that in order for this command to take effect, the target needs to be reset supported.} @end deffn +@deffn {Flash Driver} {eneispif} +All versions of the KB1200 microcontrollers from ENE include internal +flash. The eneispif flash driver supports the KB1200 family of devices. The driver +automatically recognizes the specific version's flash parameters and +autoconfigures itself. The flash bank starts at address 0x60000000. An optional additional +parameter sets the address of eneispif controller, with the default address is 0x50101000. + +@example + +flash bank $_FLASHNAME eneispif 0x60000000 0 0 0 $_TARGETNAME \ + 0x50101000 + +# Address defaults to 0x50101000 +flash bank $_FLASHNAME eneispif 0x60000000 0 0 0 $_TARGETNAME + +@end example +@end deffn + @deffn {Flash Driver} {esirisc} Members of the eSi-RISC family may optionally include internal flash programmed via the eSi-TSMC Flash interface. Additional parameters are required to |