diff options
Diffstat (limited to 'doc/openocd.texi')
| -rw-r--r-- | doc/openocd.texi | 9 |
1 files changed, 2 insertions, 7 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index c76fc07..78451c7 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2371,9 +2371,9 @@ This command is only available if your libusb1 is at least version 1.0.16. Specifies the @var{serial_string} of the adapter to use. If this command is not specified, serial strings are not checked. Only the following adapter drivers use the serial string from this command: -cmsis_dap, ft232r, ftdi, kitprog, presto, vsllink. +cmsis_dap, ft232r, ftdi, kitprog, presto, vsllink, xds110. The following adapters have their own command to specify the serial string: -hla, jlink, st-link, xds110. +hla, jlink, st-link. @end deffn @section Interface Drivers @@ -3141,11 +3141,6 @@ LaunchPad evaluation boards. The XDS110 is also available as a stand-alone USB debug probe with the added capability to supply power to the target board. The following commands are supported by the XDS110 driver: -@deffn {Config Command} {xds110 serial} serial_string -Specifies the serial number of which XDS110 probe to use. Otherwise, the first -XDS110 found will be used. -@end deffn - @deffn {Config Command} {xds110 supply} voltage_in_millivolts Available only on the XDS110 stand-alone probe. Sets the voltage level of the XDS110 power supply. A value of 0 leaves the supply off. Otherwise, the supply |