diff options
-rw-r--r-- | src/target/cortex_m3.c | 28 | ||||
-rw-r--r-- | src/target/cortex_m3.h | 2 | ||||
-rw-r--r-- | src/target/target/lm3s6965.cfg | 5 | ||||
-rw-r--r-- | src/target/target/lm3s811.cfg | 5 |
4 files changed, 34 insertions, 6 deletions
diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c index 803f05c..1f9674f 100644 --- a/src/target/cortex_m3.c +++ b/src/target/cortex_m3.c @@ -706,13 +706,26 @@ int cortex_m3_assert_reset(target_t *target) ahbap_write_system_atomic_u32(swjdp, DCB_DEMCR, TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET ); } - if (jtag_reset_config & RESET_SRST_PULLS_TRST) + /* following hack is to handle luminary reset + * when srst is asserted the luminary device seesm to also clear the debug registers + * which does not match the armv7 debug TRM */ + + if (strcmp(cortex_m3->variant, "luminary") == 0) { - jtag_add_reset(1, 1); + /* this causes the luminary device to reset using the watchdog */ + ahbap_write_system_atomic_u32(swjdp, NVIC_AIRCR, AIRCR_VECTKEY | AIRCR_SYSRESETREQ ); + LOG_DEBUG("Using Luminary Reset: SYSRESETREQ"); } else { - jtag_add_reset(0, 1); + if (jtag_reset_config & RESET_SRST_PULLS_TRST) + { + jtag_add_reset(1, 1); + } + else + { + jtag_add_reset(0, 1); + } } target->state = TARGET_RESET; @@ -1438,6 +1451,15 @@ int cortex_m3_init_arch_info(target_t *target, cortex_m3_common_t *cortex_m3, in armv7m->pre_restore_context = NULL; armv7m->post_restore_context = NULL; + if (variant) + { + cortex_m3->variant = strdup(variant); + } + else + { + cortex_m3->variant = strdup(""); + } + armv7m_init_arch_info(target, armv7m); armv7m->arch_info = cortex_m3; armv7m->load_core_reg_u32 = cortex_m3_load_core_reg_u32; diff --git a/src/target/cortex_m3.h b/src/target/cortex_m3.h index 0072e84..0d4678e 100644 --- a/src/target/cortex_m3.h +++ b/src/target/cortex_m3.h @@ -134,8 +134,8 @@ typedef struct cortex_m3_dwt_comparator_s typedef struct cortex_m3_common_s { int common_magic; - arm_jtag_t jtag_info; + char *variant; /* Context information */ u32 dcb_dhcsr; diff --git a/src/target/target/lm3s6965.cfg b/src/target/target/lm3s6965.cfg index fe3d913..ffef12e 100644 --- a/src/target/target/lm3s6965.cfg +++ b/src/target/target/lm3s6965.cfg @@ -8,7 +8,10 @@ reset_config srst_only #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -target cortex_m3 little run_and_halt 0 +# the luminary variant causes a software reset rather than asserting SRST +# this stops the debug registers from being cleared +# this will be fixed in later revisions of silicon +target cortex_m3 little reset_halt 0 luminary # 4k working area at base of ram working_area 0 0x20000000 0x4000 nobackup diff --git a/src/target/target/lm3s811.cfg b/src/target/target/lm3s811.cfg index d5888de..56d6410 100644 --- a/src/target/target/lm3s811.cfg +++ b/src/target/target/lm3s811.cfg @@ -8,7 +8,10 @@ reset_config srst_only #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -target cortex_m3 little run_and_halt 0 +# the luminary variant causes a software reset rather than asserting SRST +# this stops the debug registers from being cleared +# this will be fixed in later revisions of silicon +target cortex_m3 little reset_halt 0 luminary # 2k working area at base of ram working_area 0 0x20000000 0x2000 nobackup |