diff options
-rw-r--r-- | src/flash/Makefile.am | 5 | ||||
-rw-r--r-- | src/flash/nand.c | 127 | ||||
-rw-r--r-- | src/flash/nand.h | 2 | ||||
-rw-r--r-- | src/flash/s3c2410_nand.c | 133 | ||||
-rw-r--r-- | src/flash/s3c2412_nand.c | 87 | ||||
-rw-r--r-- | src/flash/s3c2440_nand.c | 179 | ||||
-rw-r--r-- | src/flash/s3c2443_nand.c | 89 | ||||
-rw-r--r-- | src/flash/s3c24xx_nand.c | 133 | ||||
-rw-r--r-- | src/flash/s3c24xx_nand.h | 51 | ||||
-rw-r--r-- | src/flash/s3c24xx_regs_nand.h | 123 |
10 files changed, 877 insertions, 52 deletions
diff --git a/src/flash/Makefile.am b/src/flash/Makefile.am index 37dee8b..90f009e 100644 --- a/src/flash/Makefile.am +++ b/src/flash/Makefile.am @@ -3,6 +3,7 @@ AM_CPPFLAGS = -DPKGLIBDIR=\"$(pkglibdir)\" @CPPFLAGS@ METASOURCES = AUTO noinst_LIBRARIES = libflash.a libflash_a_SOURCES = flash.c lpc2000.c cfi.c non_cfi.c at91sam7.c str7x.c str9x.c nand.c lpc3180_nand_controller.c \ - stellaris.c str9xpec.c stm32x.c tms470.c + stellaris.c str9xpec.c stm32x.c tms470.c \ + s3c24xx_nand.c s3c2410_nand.c s3c2412_nand.c s3c2440_nand.c s3c2443_nand.c noinst_HEADERS = flash.h lpc2000.h cfi.h non_cfi.h at91sam7.h str7x.h str9x.h nand.h lpc3180_nand_controller.h \ - stellaris.h str9xpec.h stm32x.h tms470.h + stellaris.h str9xpec.h stm32x.h tms470.h s3c24xx_nand.h s3c24xx_regs_nand.h diff --git a/src/flash/nand.c b/src/flash/nand.c index 52c9232..3c00db1 100644 --- a/src/flash/nand.c +++ b/src/flash/nand.c @@ -63,13 +63,20 @@ int nand_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_s /* NAND flash controller */ extern nand_flash_controller_t lpc3180_nand_controller; -/* extern nand_flash_controller_t s3c2410_nand_controller; */ +extern nand_flash_controller_t s3c2410_nand_controller; +extern nand_flash_controller_t s3c2412_nand_controller; +extern nand_flash_controller_t s3c2440_nand_controller; +extern nand_flash_controller_t s3c2443_nand_controller; + /* extern nand_flash_controller_t boundary_scan_nand_controller; */ nand_flash_controller_t *nand_flash_controllers[] = { &lpc3180_nand_controller, -/* &s3c2410_nand_controller, */ + &s3c2410_nand_controller, + &s3c2412_nand_controller, + &s3c2440_nand_controller, + &s3c2443_nand_controller, /* &boundary_scan_nand_controller, */ NULL }; @@ -707,7 +714,7 @@ int nand_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_s if (!device->device) return ERROR_NAND_DEVICE_NOT_PROBED; - if (device->use_raw) + if (device->use_raw || device->controller->write_page == NULL) return nand_write_page_raw(device, page, data, data_size, oob, oob_size); else return device->controller->write_page(device, page, data, data_size, oob, oob_size); @@ -718,7 +725,7 @@ int nand_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_si if (!device->device) return ERROR_NAND_DEVICE_NOT_PROBED; - if (device->use_raw) + if (device->use_raw || device->controller->read_page == NULL) return nand_read_page_raw(device, page, data, data_size, oob, oob_size); else return device->controller->read_page(device, page, data, data_size, oob, oob_size); @@ -782,38 +789,48 @@ int nand_read_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 dat if (data) { - for (i = 0; i < data_size;) + if (device->controller->read_block_data != NULL) + (device->controller->read_block_data)(device, data, data_size); + else { - if (device->device->options & NAND_BUSWIDTH_16) - { - device->controller->read_data(device, data); - data += 2; - i += 2; - } - else + for (i = 0; i < data_size;) { - device->controller->read_data(device, data); - data += 1; - i += 1; + if (device->device->options & NAND_BUSWIDTH_16) + { + device->controller->read_data(device, data); + data += 2; + i += 2; + } + else + { + device->controller->read_data(device, data); + data += 1; + i += 1; + } } } } if (oob) { - for (i = 0; i < oob_size;) + if (device->controller->read_block_data != NULL) + (device->controller->read_block_data)(device, oob, oob_size); + else { - if (device->device->options & NAND_BUSWIDTH_16) + for (i = 0; i < oob_size;) { - device->controller->read_data(device, oob); - oob += 2; - i += 2; - } - else - { - device->controller->read_data(device, oob); - oob += 1; - i += 1; + if (device->device->options & NAND_BUSWIDTH_16) + { + device->controller->read_data(device, oob); + oob += 2; + i += 2; + } + else + { + device->controller->read_data(device, oob); + oob += 1; + i += 1; + } } } } @@ -868,40 +885,50 @@ int nand_write_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 da if (data) { - for (i = 0; i < data_size;) + if (device->controller->write_block_data != NULL) + (device->controller->write_block_data)(device, data, data_size); + else { - if (device->device->options & NAND_BUSWIDTH_16) + for (i = 0; i < data_size;) { - u16 data_buf = le_to_h_u16(data); - device->controller->write_data(device, data_buf); - data += 2; - i += 2; - } - else - { - device->controller->write_data(device, *data); - data += 1; - i += 1; + if (device->device->options & NAND_BUSWIDTH_16) + { + u16 data_buf = le_to_h_u16(data); + device->controller->write_data(device, data_buf); + data += 2; + i += 2; + } + else + { + device->controller->write_data(device, *data); + data += 1; + i += 1; + } } } } if (oob) { - for (i = 0; i < oob_size;) + if (device->controller->write_block_data != NULL) + (device->controller->write_block_data)(device, oob, oob_size); + else { - if (device->device->options & NAND_BUSWIDTH_16) + for (i = 0; i < oob_size;) { - u16 oob_buf = le_to_h_u16(data); - device->controller->write_data(device, oob_buf); - oob += 2; - i += 2; - } - else - { - device->controller->write_data(device, *oob); - oob += 1; - i += 1; + if (device->device->options & NAND_BUSWIDTH_16) + { + u16 oob_buf = le_to_h_u16(data); + device->controller->write_data(device, oob_buf); + oob += 2; + i += 2; + } + else + { + device->controller->write_data(device, *oob); + oob += 1; + i += 1; + } } } } diff --git a/src/flash/nand.h b/src/flash/nand.h index 7161c50..cb18b0c 100644 --- a/src/flash/nand.h +++ b/src/flash/nand.h @@ -42,6 +42,8 @@ typedef struct nand_flash_controller_s int (*address)(struct nand_device_s *device, u8 address); int (*write_data)(struct nand_device_s *device, u16 data); int (*read_data)(struct nand_device_s *device, void *data); + int (*write_block_data)(struct nand_device_s *device, u8 *data, int size); + int (*read_block_data)(struct nand_device_s *device, u8 *data, int size); int (*write_page)(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size); int (*read_page)(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size); int (*controller_ready)(struct nand_device_s *device, int timeout); diff --git a/src/flash/s3c2410_nand.c b/src/flash/s3c2410_nand.c new file mode 100644 index 0000000..436eb15 --- /dev/null +++ b/src/flash/s3c2410_nand.c @@ -0,0 +1,133 @@ +/* src/flash/s3c2410_nand.c + * + * S3C2410 OpenOCD NAND Flash controller support. + * + * Copyright 2007,2008 Ben Dooks <ben@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Many thanks to Simtec Electronics for sponsoring this work. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" +#include "log.h" + +#include <stdlib.h> +#include <string.h> + +#include "nand.h" +#include "s3c24xx_nand.h" +#include "target.h" + +int s3c2410_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device); +int s3c2410_init(struct nand_device_s *device); +int s3c2410_read_data(struct nand_device_s *device, void *data); +int s3c2410_write_data(struct nand_device_s *device, u16 data); +int s3c2410_nand_ready(struct nand_device_s *device, int timeout); + +nand_flash_controller_t s3c2410_nand_controller = +{ + .name = "s3c2410", + .nand_device_command = s3c2410_nand_device_command, + .register_commands = s3c24xx_register_commands, + .init = s3c2410_init, + .reset = s3c24xx_reset, + .command = s3c24xx_command, + .address = s3c24xx_address, + .write_data = s3c2410_write_data, + .read_data = s3c2410_read_data, + .write_page = s3c24xx_write_page, + .read_page = s3c24xx_read_page, + .controller_ready = s3c24xx_controller_ready, + .nand_ready = s3c2410_nand_ready, +}; + +int s3c2410_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, + char **args, int argc, + struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *info; + + info = s3c24xx_nand_device_command(cmd_ctx, cmd, args, argc, device); + if (info == NULL) { + return ERROR_NAND_DEVICE_INVALID; + } + + /* fill in the address fields for the core device */ + info->cmd = S3C2410_NFCMD; + info->addr = S3C2410_NFADDR; + info->data = S3C2410_NFDATA; + info->nfstat = S3C2410_NFSTAT; + + return ERROR_OK; +} + +int s3c2410_init(struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + target_write_u32(target, S3C2410_NFCONF, + S3C2410_NFCONF_EN | S3C2410_NFCONF_TACLS(3) | + S3C2410_NFCONF_TWRPH0(5) | S3C2410_NFCONF_TWRPH1(3)); + + return ERROR_OK; +} + +int s3c2410_write_data(struct nand_device_s *device, u16 data) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_write_u32(target, S3C2410_NFDATA, data); + return ERROR_OK; +} + +int s3c2410_read_data(struct nand_device_s *device, void *data) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_read_u8(target, S3C2410_NFDATA, data); + return ERROR_OK; +} + +int s3c2410_nand_ready(struct nand_device_s *device, int timeout) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u8 status; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + do { + target_read_u8(target, S3C2410_NFSTAT, &status); + + if (status & S3C2410_NFSTAT_BUSY) + return 1; + + usleep(1000); + } while (timeout-- > 0); + + return 0; +} diff --git a/src/flash/s3c2412_nand.c b/src/flash/s3c2412_nand.c new file mode 100644 index 0000000..ab7a7be --- /dev/null +++ b/src/flash/s3c2412_nand.c @@ -0,0 +1,87 @@ +/* src/flash/s3c2412_nand.c + * + * S3C2412 OpenOCD NAND Flash controller support. + * + * Copyright 2007,2008 Ben Dooks <ben@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Many thanks to Simtec Electronics for sponsoring this work. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" +#include "log.h" + +#include <stdlib.h> +#include <string.h> + +#include "nand.h" +#include "s3c24xx_nand.h" +#include "target.h" + +int s3c2412_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device); +int s3c2412_init(struct nand_device_s *device); + +nand_flash_controller_t s3c2412_nand_controller = +{ + .name = "s3c2412", + .nand_device_command = s3c2412_nand_device_command, + .register_commands = s3c24xx_register_commands, + .init = s3c2412_init, + .reset = s3c24xx_reset, + .command = s3c24xx_command, + .address = s3c24xx_address, + .write_data = s3c24xx_write_data, + .read_data = s3c24xx_read_data, + .write_page = s3c24xx_write_page, + .read_page = s3c24xx_read_page, + .write_block_data = s3c2440_write_block_data, + .read_block_data = s3c2440_read_block_data, + .controller_ready = s3c24xx_controller_ready, + .nand_ready = s3c2440_nand_ready, +}; + +int s3c2412_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, + char **args, int argc, + struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *info; + + info = s3c24xx_nand_device_command(cmd_ctx, cmd, args, argc, device); + if (info == NULL) { + return ERROR_NAND_DEVICE_INVALID; + } + + /* fill in the address fields for the core device */ + info->cmd = S3C2440_NFCMD; + info->addr = S3C2440_NFADDR; + info->data = S3C2440_NFDATA; + info->nfstat = S3C2412_NFSTAT; + + return ERROR_OK; +} + +int s3c2412_init(struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u32 version; + + target_write_u32(target, S3C2410_NFCONF, + S3C2440_NFCONF_TACLS(3) | + S3C2440_NFCONF_TWRPH0(7) | + S3C2440_NFCONF_TWRPH1(7)); + + target_write_u32(target, S3C2440_NFCONT, + S3C2412_NFCONT_INIT_MAIN_ECC | + S3C2440_NFCONT_ENABLE); + + return ERROR_OK; +} diff --git a/src/flash/s3c2440_nand.c b/src/flash/s3c2440_nand.c new file mode 100644 index 0000000..fd19719 --- /dev/null +++ b/src/flash/s3c2440_nand.c @@ -0,0 +1,179 @@ +/* src/flash/s3c2440_nand.c + * + * S3C2440 OpenOCD NAND Flash controller support. + * + * Copyright 2007,2008 Ben Dooks <ben@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Many thanks to Simtec Electronics for sponsoring this work. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" +#include "log.h" + +#include <stdlib.h> +#include <string.h> + +#include "nand.h" +#include "s3c24xx_nand.h" +#include "target.h" + +int s3c2440_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device); +int s3c2440_init(struct nand_device_s *device); +int s3c2440_nand_ready(struct nand_device_s *device, int timeout); + +nand_flash_controller_t s3c2440_nand_controller = +{ + .name = "s3c2440", + .nand_device_command = s3c2440_nand_device_command, + .register_commands = s3c24xx_register_commands, + .init = s3c2440_init, + .reset = s3c24xx_reset, + .command = s3c24xx_command, + .address = s3c24xx_address, + .write_data = s3c24xx_write_data, + .read_data = s3c24xx_read_data, + .write_page = s3c24xx_write_page, + .read_page = s3c24xx_read_page, + .write_block_data = s3c2440_write_block_data, + .read_block_data = s3c2440_read_block_data, + .controller_ready = s3c24xx_controller_ready, + .nand_ready = s3c2440_nand_ready, +}; + +int s3c2440_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, + char **args, int argc, + struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *info; + + info = s3c24xx_nand_device_command(cmd_ctx, cmd, args, argc, device); + if (info == NULL) { + return ERROR_NAND_DEVICE_INVALID; + } + + /* fill in the address fields for the core device */ + info->cmd = S3C2440_NFCMD; + info->addr = S3C2440_NFADDR; + info->data = S3C2440_NFDATA; + info->nfstat = S3C2440_NFSTAT; + + return ERROR_OK; +} + +int s3c2440_init(struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u32 version; + + target_write_u32(target, S3C2410_NFCONF, + S3C2440_NFCONF_TACLS(3) | + S3C2440_NFCONF_TWRPH0(7) | + S3C2440_NFCONF_TWRPH1(7)); + + target_write_u32(target, S3C2440_NFCONT, + S3C2440_NFCONT_INITECC | S3C2440_NFCONT_ENABLE); + + return ERROR_OK; +} + +int s3c2440_nand_ready(struct nand_device_s *device, int timeout) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u8 status; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + do { + target_read_u8(target, s3c24xx_info->nfstat, &status); + + if (status & S3C2440_NFSTAT_READY) + return 1; + + usleep(1000); + } while (timeout-- > 0); + + + return 0; +} + +/* use the fact we can read/write 4 bytes in one go via a single 32bit op */ + +int s3c2440_read_block_data(struct nand_device_s *device, u8 *data, int data_size) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u32 nfdata = s3c24xx_info->data; + u32 tmp; + + printf("%s: reading data: %p, %p, %d\n", __func__, device, data, data_size); + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + while (data_size >= 4) { + target_read_u32(target, nfdata, &tmp); + + data[0] = tmp; + data[1] = tmp >> 8; + data[2] = tmp >> 16; + data[3] = tmp >> 24; + + data_size -= 4; + data += 4; + } + + while (data_size > 0) { + target_read_u8(target, nfdata, data); + + data_size -= 1; + data += 1; + } + + return ERROR_OK; +} + +int s3c2440_write_block_data(struct nand_device_s *device, u8 *data, int data_size) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u32 nfdata = s3c24xx_info->data; + u32 tmp; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + while (data_size >= 4) { + tmp = le_to_h_u32(data); + target_write_u32(target, nfdata, tmp); + + data_size -= 4; + data += 4; + } + + while (data_size > 0) { + target_write_u8(target, nfdata, *data); + + data_size -= 1; + data += 1; + } + + return ERROR_OK; +} diff --git a/src/flash/s3c2443_nand.c b/src/flash/s3c2443_nand.c new file mode 100644 index 0000000..56e84b6 --- /dev/null +++ b/src/flash/s3c2443_nand.c @@ -0,0 +1,89 @@ +/* src/flash/s3c2443_nand.c + * + * S3C2443 OpenOCD NAND Flash controller support. + * + * Copyright 2007,2008 Ben Dooks <ben@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Many thanks to Simtec Electronics for sponsoring this work. + */ + + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" +#include "log.h" + +#include <stdlib.h> +#include <string.h> + +#include "nand.h" +#include "s3c24xx_nand.h" +#include "target.h" + +int s3c2443_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device); +int s3c2443_init(struct nand_device_s *device); +int s3c2443_nand_ready(struct nand_device_s *device, int timeout); + +nand_flash_controller_t s3c2443_nand_controller = +{ + .name = "s3c2443", + .nand_device_command = s3c2443_nand_device_command, + .register_commands = s3c24xx_register_commands, + .init = s3c2443_init, + .reset = s3c24xx_reset, + .command = s3c24xx_command, + .address = s3c24xx_address, + .write_data = s3c24xx_write_data, + .read_data = s3c24xx_read_data, + .write_page = s3c24xx_write_page, + .read_page = s3c24xx_read_page, + .write_block_data = s3c2440_write_block_data, + .read_block_data = s3c2440_read_block_data, + .controller_ready = s3c24xx_controller_ready, + .nand_ready = s3c2440_nand_ready, +}; + +int s3c2443_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, + char **args, int argc, + struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *info; + + info = s3c24xx_nand_device_command(cmd_ctx, cmd, args, argc, device); + if (info == NULL) { + return ERROR_NAND_DEVICE_INVALID; + } + + /* fill in the address fields for the core device */ + info->cmd = S3C2440_NFCMD; + info->addr = S3C2440_NFADDR; + info->data = S3C2440_NFDATA; + info->nfstat = S3C2412_NFSTAT; + + return ERROR_OK; +} + +int s3c2443_init(struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + u32 version; + + target_write_u32(target, S3C2410_NFCONF, + S3C2440_NFCONF_TACLS(3) | + S3C2440_NFCONF_TWRPH0(7) | + S3C2440_NFCONF_TWRPH1(7)); + + target_write_u32(target, S3C2440_NFCONT, + S3C2412_NFCONT_INIT_MAIN_ECC | + S3C2440_NFCONT_ENABLE); + + return ERROR_OK; +} diff --git a/src/flash/s3c24xx_nand.c b/src/flash/s3c24xx_nand.c new file mode 100644 index 0000000..6bde224 --- /dev/null +++ b/src/flash/s3c24xx_nand.c @@ -0,0 +1,133 @@ +/* src/flash/s3c24xx_nand.c + * + * S3C24XX Series OpenOCD NAND Flash controller support. + * + * Copyright 2007,2008 Ben Dooks <ben@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Many thanks to Simtec Electronics for sponsoring this work. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "replacements.h" +#include "log.h" + +#include <stdlib.h> +#include <string.h> + +#include "nand.h" +#include "s3c24xx_nand.h" +#include "target.h" + +s3c24xx_nand_controller_t * +s3c24xx_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, + char **args, int argc, + struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *s3c24xx_info; + + s3c24xx_info = malloc(sizeof(s3c24xx_nand_controller_t)); + if (s3c24xx_info == NULL) { + ERROR("no memory for nand controller\n"); + return NULL; + } + + device->controller_priv = s3c24xx_info; + + s3c24xx_info->target = get_target_by_num(strtoul(args[1], NULL, 0)); + if (s3c24xx_info->target == NULL) { + ERROR("no target '%s' configured", args[1]); + return NULL; + } + + return s3c24xx_info; +} + +int s3c24xx_register_commands(struct command_context_s *cmd_ctx) +{ + return ERROR_OK; +} + +int s3c24xx_reset(struct nand_device_s *device) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_write_u32(target, s3c24xx_info->cmd, 0xff); + + return ERROR_OK; +} + +int s3c24xx_command(struct nand_device_s *device, u8 command) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_write_u16(target, s3c24xx_info->cmd, command); + return ERROR_OK; +} + + +int s3c24xx_address(struct nand_device_s *device, u8 address) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_write_u16(target, s3c24xx_info->addr, address); + return ERROR_OK; +} + +int s3c24xx_write_data(struct nand_device_s *device, u16 data) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_write_u8(target, s3c24xx_info->data, data); + return ERROR_OK; +} + +int s3c24xx_read_data(struct nand_device_s *device, void *data) +{ + s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv; + target_t *target = s3c24xx_info->target; + + if (target->state != TARGET_HALTED) { + ERROR("target must be halted to use S3C24XX NAND flash controller"); + return ERROR_NAND_OPERATION_FAILED; + } + + target_read_u8(target, s3c24xx_info->data, data); + return ERROR_OK; +} + +int s3c24xx_controller_ready(struct nand_device_s *device, int timeout) +{ + return 1; +} diff --git a/src/flash/s3c24xx_nand.h b/src/flash/s3c24xx_nand.h new file mode 100644 index 0000000..f419352 --- /dev/null +++ b/src/flash/s3c24xx_nand.h @@ -0,0 +1,51 @@ +/* src/flash/s3c24xx_nand.h + * + * S3C24XX Series OpenOCD NAND Flash controller support. + * + * Copyright 2007,2008 Ben Dooks <ben@fluff.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Many thanks to Simtec Electronics for sponsoring this work. + */ + +#include "target.h" +#include "s3c24xx_regs_nand.h" + +typedef struct s3c24xx_nand_controller_s +{ + struct target_s *target; + + /* register addresses */ + u32 cmd; + u32 addr; + u32 data; + u32 nfstat; +} s3c24xx_nand_controller_t; + +/* Default to using the un-translated NAND register based address */ +#undef S3C2410_NFREG +#define S3C2410_NFREG(x) ((x) + 0x4e000000) + +extern s3c24xx_nand_controller_t *s3c24xx_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device); + +extern int s3c24xx_register_commands(struct command_context_s *cmd_ctx); +extern int s3c24xx_reset(struct nand_device_s *device); +extern int s3c24xx_command(struct nand_device_s *device, u8 command); +extern int s3c24xx_address(struct nand_device_s *device, u8 address); +extern int s3c24xx_write_data(struct nand_device_s *device, u16 data); +extern int s3c24xx_read_data(struct nand_device_s *device, void *data); +extern int s3c24xx_controller_ready(struct nand_device_s *device, int tout); + +#define s3c24xx_write_page NULL +#define s3c24xx_read_page NULL + +/* code shared between different controllers */ + +extern int s3c2440_nand_ready(struct nand_device_s *device, int timeout); + +extern int s3c2440_read_block_data(struct nand_device_s *, u8 *data, int data_size); +extern int s3c2440_write_block_data(struct nand_device_s *, u8 *data, int data_size); diff --git a/src/flash/s3c24xx_regs_nand.h b/src/flash/s3c24xx_regs_nand.h new file mode 100644 index 0000000..d742205 --- /dev/null +++ b/src/flash/s3c24xx_regs_nand.h @@ -0,0 +1,123 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-nand.h + * + * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 NAND register definitions +*/ + +#ifndef __ASM_ARM_REGS_NAND +#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $" + + +#define S3C2410_NFREG(x) (x) + +#define S3C2410_NFCONF S3C2410_NFREG(0x00) +#define S3C2410_NFCMD S3C2410_NFREG(0x04) +#define S3C2410_NFADDR S3C2410_NFREG(0x08) +#define S3C2410_NFDATA S3C2410_NFREG(0x0C) +#define S3C2410_NFSTAT S3C2410_NFREG(0x10) +#define S3C2410_NFECC S3C2410_NFREG(0x14) + +#define S3C2440_NFCONT S3C2410_NFREG(0x04) +#define S3C2440_NFCMD S3C2410_NFREG(0x08) +#define S3C2440_NFADDR S3C2410_NFREG(0x0C) +#define S3C2440_NFDATA S3C2410_NFREG(0x10) +#define S3C2440_NFECCD0 S3C2410_NFREG(0x14) +#define S3C2440_NFECCD1 S3C2410_NFREG(0x18) +#define S3C2440_NFECCD S3C2410_NFREG(0x1C) +#define S3C2440_NFSTAT S3C2410_NFREG(0x20) +#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24) +#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) +#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) +#define S3C2440_NFMECC1 S3C2410_NFREG(0x30) +#define S3C2440_NFSECC S3C2410_NFREG(0x34) +#define S3C2440_NFSBLK S3C2410_NFREG(0x38) +#define S3C2440_NFEBLK S3C2410_NFREG(0x3C) + +#define S3C2412_NFSBLK S3C2410_NFREG(0x20) +#define S3C2412_NFEBLK S3C2410_NFREG(0x24) +#define S3C2412_NFSTAT S3C2410_NFREG(0x28) +#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) +#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) +#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) +#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) +#define S3C2412_NFSECC S3C2410_NFREG(0x3C) + +#define S3C2410_NFCONF_EN (1<<15) +#define S3C2410_NFCONF_512BYTE (1<<14) +#define S3C2410_NFCONF_4STEP (1<<13) +#define S3C2410_NFCONF_INITECC (1<<12) +#define S3C2410_NFCONF_nFCE (1<<11) +#define S3C2410_NFCONF_TACLS(x) ((x)<<8) +#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) +#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) + +#define S3C2410_NFSTAT_BUSY (1<<0) + +#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0) +#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0) +#define S3C2440_NFCONF_ADVFLASH (1<<3) +#define S3C2440_NFCONF_TACLS(x) ((x)<<12) +#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8) +#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4) + +#define S3C2440_NFCONT_LOCKTIGHT (1<<13) +#define S3C2440_NFCONT_SOFTLOCK (1<<12) +#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10) +#define S3C2440_NFCONT_RNBINT_EN (1<<9) +#define S3C2440_NFCONT_RN_FALLING (1<<8) +#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6) +#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5) +#define S3C2440_NFCONT_INITECC (1<<4) +#define S3C2440_NFCONT_nFCE (1<<1) +#define S3C2440_NFCONT_ENABLE (1<<0) + +#define S3C2440_NFSTAT_READY (1<<0) +#define S3C2440_NFSTAT_nCE (1<<1) +#define S3C2440_NFSTAT_RnB_CHANGE (1<<2) +#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) + +#define S3C2412_NFCONF_NANDBOOT (1<<31) +#define S3C2412_NFCONF_ECCCLKCON (1<<30) +#define S3C2412_NFCONF_ECC_MLC (1<<24) +#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ + +#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) +#define S3C2412_NFCONT_LOCKTIGHT (1<<17) +#define S3C2412_NFCONT_SOFTLOCK (1<<16) +#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) +#define S3C2412_NFCONT_ECC4_DECINT (1<<12) +#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) +#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) +#define S3C2412_NFCONT_nFCE1 (1<<2) +#define S3C2412_NFCONT_nFCE0 (1<<1) + +#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) +#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) +#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) +#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) +#define S3C2412_NFSTAT_nFCE1 (1<<3) +#define S3C2412_NFSTAT_nFCE0 (1<<2) +#define S3C2412_NFSTAT_Res1 (1<<1) +#define S3C2412_NFSTAT_READY (1<<0) + +#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) +#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) +#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) +#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) +#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) +#define S3C2412_NFECCERR_NONE (0) +#define S3C2412_NFECCERR_1BIT (1) +#define S3C2412_NFECCERR_MULTIBIT (2) +#define S3C2412_NFECCERR_ECCAREA (3) + + + +#endif /* __ASM_ARM_REGS_NAND */ + |