diff options
-rw-r--r-- | src/target/board/imx27lnst.cfg | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/src/target/board/imx27lnst.cfg b/src/target/board/imx27lnst.cfg new file mode 100644 index 0000000..2ee7f09 --- /dev/null +++ b/src/target/board/imx27lnst.cfg @@ -0,0 +1,59 @@ +# The Linuxstamp-mx27 is board has a single IMX27 chip +# For further info see http://opencircuits.com/Linuxstamp_mx27#OpenOCD +source [find target/imx27.cfg] +$_TARGETNAME configure -event gdb-attach { reset init } +$_TARGETNAME configure -event reset-init { imx27lnst_init } + +proc imx27lnst_init { } { + # This setup puts RAM at 0xA0000000 + + # reset the board correctly + jtag_khz 500 + reset run + reset halt + + mww 0x10000000 0x20040304 + mww 0x10020000 0x00000000 + mww 0x10000004 0xDFFBFCFB + mww 0x10020004 0xFFFFFFFF + + sleep 100 + + # ======================================== + # Configure DDR on CSD0 -- initial reset + # ======================================== + mww 0xD8001010 0x00000008 + + sleep 100 + + # ======================================== + # Configure DDR on CSD0 -- wait 5000 cycle + # ======================================== + mww 0x10027828 0x55555555 + mww 0x10027830 0x55555555 + mww 0x10027834 0x55555555 + mww 0x10027838 0x00005005 + mww 0x1002783C 0x15555555 + + mww 0xD8001010 0x00000004 + + mww 0xD8001004 0x00795729 + + #mww 0xD8001000 0x92200000 + mww 0xD8001000 0x91120000 + mww 0xA0000F00 0x0 + + #mww 0xD8001000 0xA2200000 + mww 0xD8001000 0xA1120000 + mww 0xA0000F00 0x0 + mww 0xA0000F00 0x0 + + #mww 0xD8001000 0xB2200000 + mww 0xD8001000 0xB1120000 + mwb 0xA0000033 0xFF + mwb 0xA1000000 0xAA + + #mww 0xD8001000 0x82228085 + mww 0xD8001000 0x81128080 + +} |