diff options
45 files changed, 110 insertions, 169 deletions
diff --git a/src/target/target/aduc702x.cfg b/src/target/target/aduc702x.cfg index 5c297fb..c9ef92c 100644 --- a/src/target/target/aduc702x.cfg +++ b/src/target/target/aduc702x.cfg @@ -15,13 +15,13 @@ jtag_device 4 0x1 0xf 0xe ## ## Target configuration ## -target arm7tdmi little 0 +target create target0 arm7tdmi -endian little -chain-position 0 ## software initiated reset (if your SRST isn't wired) #proc target_0_reset {} { mwb 0x0ffff0230 04 } # use top 1k of SRAM for as temporary JTAG memory -#working_area 0 0x11C00 0x400 backup +#[new_target_name] configure -work-area-virt 0 -work-area-phys 0x11C00 -work-area-size 0x400 -work-area-backup 1 ## flash configuration flash bank aduc702x 0x80000 0x10000 2 2 0 diff --git a/src/target/target/at91eb40a.cfg b/src/target/target/at91eb40a.cfg index 60153be..b2b91db 100644 --- a/src/target/target/at91eb40a.cfg +++ b/src/target/target/at91eb40a.cfg @@ -14,7 +14,7 @@ reset_config srst_only srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 # speed up memory downloads arm7_9 fast_memory_access enable @@ -25,8 +25,7 @@ flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf # required for usable performance. Used for lots of # other things than flash programming. -working_area 0 0x00030000 0x10000 nobackup - +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0 [new_target_name] configure -event reset-init { puts "Running reset init script for AT91EB40A" diff --git a/src/target/target/at91r40008.cfg b/src/target/target/at91r40008.cfg index 7c4be18..6ed6957 100644 --- a/src/target/target/at91r40008.cfg +++ b/src/target/target/at91r40008.cfg @@ -8,14 +8,13 @@ reset_config srst_only srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event old-gdb_program_config { script event/at91r40008_reset.script } -working_area 0 0x3C000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 + flash bank cfi 0x10000000 0x400000 2 2 0 # For more information about the configuration files, take a look at: diff --git a/src/target/target/at91sam9260.cfg b/src/target/target/at91sam9260.cfg index a9ef6a0..63d20fb 100644 --- a/src/target/target/at91sam9260.cfg +++ b/src/target/target/at91sam9260.cfg @@ -14,15 +14,11 @@ jtag_ntrst_delay 0 # Target configuration ###################### -#target <type> <endianess> <reset mode> <JTAG pos> <variant> -target arm926ejs little 0 arm926ejs +target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs [new_target_name] configure -event reset-init { script event/at91sam9260_reset.script } - -#working area <target#> <address> <size> <backup|nobackup> -working_area 0 0x00300000 0x1000 backup - +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 ##################### # Flash configuration diff --git a/src/target/target/at91sam9260minimal.cfg b/src/target/target/at91sam9260minimal.cfg index 70e8874..ca6edd9 100644 --- a/src/target/target/at91sam9260minimal.cfg +++ b/src/target/target/at91sam9260minimal.cfg @@ -14,7 +14,6 @@ jtag_ntrst_delay 200 # Target configuration ###################### -#target <type> <endianess> <reset mode> <JTAG pos> <variant> -target arm926ejs little 0 arm926ejs +target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs diff --git a/src/target/target/eir-sam7se512.cfg b/src/target/target/eir-sam7se512.cfg index a378a20..dfc2475 100644 --- a/src/target/target/eir-sam7se512.cfg +++ b/src/target/target/eir-sam7se512.cfg @@ -5,12 +5,12 @@ reset_config srst_only srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-init { script event/eir-sam7se512_reset.script } -working_area 0 0x00200000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank at91sam7 0 0 0 0 0 diff --git a/src/target/target/epc9301.cfg b/src/target/target/epc9301.cfg index f1e479d..31ff332 100644 --- a/src/target/target/epc9301.cfg +++ b/src/target/target/epc9301.cfg @@ -3,8 +3,8 @@ jtag_device 4 0x1 0xf 0xe jtag_nsrst_delay 100 jtag_ntrst_delay 100 -target arm920t little 0 -working_area 0 0x80014000 0x1000 backup +target create target0 arm920t -endian little -chain-position 0 -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1 + #flash configuration #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] flash bank cfi 0x60000000 0x1000000 2 2 0 diff --git a/src/target/target/hammer.cfg b/src/target/target/hammer.cfg index 627266d..b267861 100644 --- a/src/target/target/hammer.cfg +++ b/src/target/target/hammer.cfg @@ -9,17 +9,14 @@ reset_config trst_and_srst jtag_device 4 0x1 0xf 0xe -target arm920t little 0 arm920t +target create target0 arm920t -endian little -chain-position 0 -variant arm920t +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40800000 -work-area-size 0x20000 -work-area-backup 0 [new_target_name] configure -event reset-init { script event/hammer_reset.script } # speed up memory downloads arm7 fast_memory_access enable arm7_9 dcc_downloads enable - -working_area 0 0x30800000 0x20000 nobackup - - #flash configuration #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] flash bank cfi 0x00000000 0x1000000 2 2 0 diff --git a/src/target/target/imx31.cfg b/src/target/target/imx31.cfg index cf18f3e..34b35d8 100644 --- a/src/target/target/imx31.cfg +++ b/src/target/target/imx31.cfg @@ -15,5 +15,5 @@ jtag_device 5 0x1 0x0 0x1e jtag_nsrst_delay 500 jtag_ntrst_delay 500 -target arm11 little 1 +target create target0 arm11 -endian little -chain-position 1 diff --git a/src/target/target/ipx42x.cfg b/src/target/target/ipx42x.cfg index 9445992..f2185f8 100644 --- a/src/target/target/ipx42x.cfg +++ b/src/target/target/ipx42x.cfg @@ -5,5 +5,5 @@ reset_config srst_only srst_pulls_trst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 7 0x1 0x7f 0x7e -target xscale big 0 IXP42x +target create target0 xscale -endian big -chain-position 0 -variant IXP42x diff --git a/src/target/target/lm3s3748.cfg b/src/target/target/lm3s3748.cfg index ff3d715..bb35181 100644 --- a/src/target/target/lm3s3748.cfg +++ b/src/target/target/lm3s3748.cfg @@ -19,10 +19,10 @@ jtag_device 4 0x1 0xf 0xe # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon -target cortex_m3 little 0 lm3s +target create target0 cortex_m3 -endian little -chain-position 0 -variant lm3s # 8k working area at base of ram -working_area 0 0x20000000 0x2000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 #flash configuration flash bank stellaris 0 0 0 0 0 diff --git a/src/target/target/lm3s6965.cfg b/src/target/target/lm3s6965.cfg index b9e8ce2..e1d3822 100644 --- a/src/target/target/lm3s6965.cfg +++ b/src/target/target/lm3s6965.cfg @@ -16,10 +16,10 @@ jtag_device 4 0x1 0xf 0xe # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon -target cortex_m3 little 0 lm3s +target create target0 cortex_m3 -endian little -chain-position 0 -variant lm3s # 4k working area at base of ram -working_area 0 0x20000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x4000 -work-area-backup 0 #flash configuration flash bank stellaris 0 0 0 0 0 diff --git a/src/target/target/lm3s811.cfg b/src/target/target/lm3s811.cfg index 2cfd4e1..9054333 100644 --- a/src/target/target/lm3s811.cfg +++ b/src/target/target/lm3s811.cfg @@ -16,10 +16,10 @@ jtag_device 4 0x1 0xf 0xe # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon -target cortex_m3 little 0 lm3s +target create target0 cortex_m3 -endian little -chain-position 0 -variant lm3s # 8k working area at base of ram -working_area 0 0x20000000 0x2000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 #flash configuration flash bank stellaris 0 0 0 0 0 diff --git a/src/target/target/lpc2129.cfg b/src/target/target/lpc2129.cfg index b9a3308..d94f822 100644 --- a/src/target/target/lpc2129.cfg +++ b/src/target/target/lpc2129.cfg @@ -4,8 +4,9 @@ reset_config trst_and_srst srst_pulls_trst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 + +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 -working_area 0 0x40000000 0x4000 nobackup #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg index 67b3d11..24ec05e 100644 --- a/src/target/target/lpc2148.cfg +++ b/src/target/target/lpc2148.cfg @@ -13,7 +13,7 @@ reset_config trst_and_srst srst_pulls_trst #jtag scan chain jtag_device 4 0x1 0xf 0xe -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 [new_target_name] configure -event reset-init { # Force target into ARM state soft_reset_halt @@ -22,7 +22,7 @@ target arm7tdmi little 0 arm7tdmi-s_r4 } -working_area 0 0x40000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 diff --git a/src/target/target/lpc2294.cfg b/src/target/target/lpc2294.cfg index df1a3e2..bd282eb 100644 --- a/src/target/target/lpc2294.cfg +++ b/src/target/target/lpc2294.cfg @@ -5,12 +5,8 @@ reset_config trst_and_srst srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi-s_r4 - - -working_area 0 0x40000000 0x4000 nobackup +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash configuration #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> diff --git a/src/target/target/netx500.cfg b/src/target/target/netx500.cfg index 21a0e10..e7b5e51 100644 --- a/src/target/target/netx500.cfg +++ b/src/target/target/netx500.cfg @@ -6,5 +6,5 @@ reset_config trst_and_srst jtag_device 4 0x1 0xf 0xe jtag_nsrst_delay 100 jtag_ntrst_delay 100 -target arm926ejs little 0 arm926ejs +target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs diff --git a/src/target/target/nslu2.cfg b/src/target/target/nslu2.cfg index 53907bc..c545e01 100644 --- a/src/target/target/nslu2.cfg +++ b/src/target/target/nslu2.cfg @@ -6,12 +6,12 @@ reset_config srst_only jtag_device 7 0x1 0x7f 0x7e # target configuration -target xscale big 0 ixp42x +target create target0 xscale -endian big -chain-position 0 -variant ixp42x # maps to PXA internal RAM. If you are using a PXA255 # you must initialize SDRAM or leave this option off -working_area 0 0x00020000 0x10000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0 # flash bank <driver> <base> <size> <chip_width> <bus_width> #flash bank cfi 0x50000000 0x1000000 2 4 0 diff --git a/src/target/target/omap5912.cfg b/src/target/target/omap5912.cfg index fdc8e71..c1e34ea 100644 --- a/src/target/target/omap5912.cfg +++ b/src/target/target/omap5912.cfg @@ -10,11 +10,11 @@ jtag_device 38 0x0 0x0 0x0 jtag_device 4 0x1 0x0 0xe jtag_device 8 0x0 0x0 0x0 -target arm926ejs little 1 arm926ejs +target create target0 arm926ejs -endian little -chain-position 1 -variant arm926ejs [new_target_name] configure -event reset-init { script event/omap5912_reset.script } # omap5912 lcd frame buffer as working area -working_area 0 0x20000000 0x3e800 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank cfi 0x00000000 0x1000000 2 2 0 diff --git a/src/target/target/pic32mx.cfg b/src/target/target/pic32mx.cfg index 6b6e8b3..1d23ff2 100644 --- a/src/target/target/pic32mx.cfg +++ b/src/target/target/pic32mx.cfg @@ -8,12 +8,8 @@ reset_config srst_only #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 5 0x1 0x1 0x1e -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target mips_m4k little 0 - - -working_area 0 0xa0000000 16384 nobackup +target create target0 mips_m4k -endian little -chain-position 0 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 #flash bank str7x <base> <size> 0 0 <target#> <variant> #flash bank stm32x 0 0 0 0 0 diff --git a/src/target/target/pxa255.cfg b/src/target/target/pxa255.cfg index 6a5c12b..c5a27be 100644 --- a/src/target/target/pxa255.cfg +++ b/src/target/target/pxa255.cfg @@ -2,7 +2,7 @@ jtag_device 5 0x1 0x1f 0x1e jtag_nsrst_delay 200 jtag_ntrst_delay 200 -target xscale little 0 pxa255 +target create target0 xscale -endian little -chain-position 0 -variant pxa255 [new_target_name] configure -event reset-init { script event/pxa255_reset.script } reset_config trst_and_srst diff --git a/src/target/target/pxa255_sst.cfg b/src/target/target/pxa255_sst.cfg index b927369..49ebd2b 100644 --- a/src/target/target/pxa255_sst.cfg +++ b/src/target/target/pxa255_sst.cfg @@ -10,4 +10,5 @@ script target/pxa255.cfg # flash bank <driver> <base> <size> <chip_width> <bus_width> <targetNum> [options] flash bank cfi 0x00000000 0x80000 2 2 0 jedec_probe -working_area 0 0x4000000 0x4000 nobackup 0 + +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0 diff --git a/src/target/target/pxa270.cfg b/src/target/target/pxa270.cfg index 5818dc2..dcf5fa2 100644 --- a/src/target/target/pxa270.cfg +++ b/src/target/target/pxa270.cfg @@ -10,10 +10,10 @@ reset_config trst_and_srst separate #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 7 0x1 0x7f 0x7e -target xscale little 0 pxa27x +target create target0 xscale -endian little -chain-position 0 -variant pxa27x # maps to PXA internal RAM. If you are using a PXA255 # you must initialize SDRAM or leave this option off -working_area 0 0x5c000000 0x10000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> # works for P30 flash diff --git a/src/target/target/s3c2440.cfg b/src/target/target/s3c2440.cfg index 6e00a1e..6227107 100644 --- a/src/target/target/s3c2440.cfg +++ b/src/target/target/s3c2440.cfg @@ -7,10 +7,9 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -target arm920t little 0 arm920t +target create target0 arm920t -endian little -chain-position 0 -variant arm920t #reset configuration reset_config trst_and_srst -working_area 0 0x200000 0x4000 backup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 diff --git a/src/target/target/sam7x256.cfg b/src/target/target/sam7x256.cfg index e0030c7..026d402 100644 --- a/src/target/target/sam7x256.cfg +++ b/src/target/target/sam7x256.cfg @@ -5,12 +5,10 @@ reset_config srst_only srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-init { script event/sam7x256_reset.script } -working_area 0 0x00200000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank at91sam7 0 0 0 0 0 diff --git a/src/target/target/stm32.cfg b/src/target/target/stm32.cfg index fedafd1..1c80679 100644 --- a/src/target/target/stm32.cfg +++ b/src/target/target/stm32.cfg @@ -14,12 +14,9 @@ reset_config trst_and_srst jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target cortex_m3 little 0 +target create target0 cortex_m3 -endian little -chain-position 0 - -working_area 0 0x20000000 16384 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 #flash bank str7x <base> <size> 0 0 <target#> <variant> flash bank stm32x 0 0 0 0 0 diff --git a/src/target/target/stm32stick.cfg b/src/target/target/stm32stick.cfg index f3e4006..00964ab 100644 --- a/src/target/target/stm32stick.cfg +++ b/src/target/target/stm32stick.cfg @@ -15,12 +15,9 @@ jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target cortex_m3 little 0 +target create target0 cortex_m3 -endian little -chain-position 0 - -working_area 0 0x20000000 16384 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 #flash bank str7x <base> <size> 0 0 <target#> <variant> flash bank stm32x 0 0 0 0 0 diff --git a/src/target/target/str710.cfg b/src/target/target/str710.cfg index ea57e9f..3273efd 100644 --- a/src/target/target/str710.cfg +++ b/src/target/target/str710.cfg @@ -9,15 +9,11 @@ reset_config trst_and_srst srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 6000 } [new_target_name] configure -event old-gdb_program_config { script event/str710_program.script } - - -working_area 0 0x2000C000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 #flash bank str7x <base> <size> 0 0 <target#> <variant> flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x diff --git a/src/target/target/str730.cfg b/src/target/target/str730.cfg index 2851bef..b36387a 100644 --- a/src/target/target/str730.cfg +++ b/src/target/target/str730.cfg @@ -16,12 +16,11 @@ jtag_device 4 0x1 0xf 0xe jtag_nsrst_delay 500 jtag_ntrst_delay 500 -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 3000 } [new_target_name] configure -event old-gdb_program_config { script event/str730_program.script } - -working_area 0 0x40000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x diff --git a/src/target/target/str750.cfg b/src/target/target/str750.cfg index d5fa45e..6c69bb3 100644 --- a/src/target/target/str750.cfg +++ b/src/target/target/str750.cfg @@ -16,15 +16,12 @@ jtag_device 4 0x1 0xf 0xe jtag_nsrst_delay 500 jtag_ntrst_delay 500 -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 3000 } [new_target_name] configure -event old-gdb_program_config { script event/str750_program.script } - -working_area 0 0x40000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x diff --git a/src/target/target/str912.cfg b/src/target/target/str912.cfg index cd0ec11..6f605b0 100644 --- a/src/target/target/str912.cfg +++ b/src/target/target/str912.cfg @@ -17,9 +17,7 @@ jtag_device 8 0x1 0x1 0xfe jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm966e little 1 arm966e +target create target0 arm966e -endian little -chain-position 1 -variant arm966e [new_target_name] configure -event reset-start { jtag_rclk 16 } @@ -35,9 +33,7 @@ target arm966e little 1 arm966e flash protect 0 0 7 off } - - -working_area 0 0x50000000 16384 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank str9x <base> <size> 0 0 <target#> <variant> flash bank str9x 0x00000000 0x00080000 0 0 0 diff --git a/src/target/target/str9comstick.cfg b/src/target/target/str9comstick.cfg index f9dbe01..b9b5fc7 100644 --- a/src/target/target/str9comstick.cfg +++ b/src/target/target/str9comstick.cfg @@ -12,8 +12,8 @@ reset_config trst_and_srst jtag_device 8 0x1 0x1 0xfe jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e -target arm966e little 1 arm966e +target create target0 arm966e -endian little -chain-position 1 -variant arm966e +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 -working_area 0 0x50000000 16384 nobackup #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank str9x 0x00000000 0x00080000 0 0 0 diff --git a/src/target/target/test_reset_syntax_error.cfg b/src/target/target/test_reset_syntax_error.cfg index 1f6b0e9..b720ca9 100644 --- a/src/target/target/test_reset_syntax_error.cfg +++ b/src/target/target/test_reset_syntax_error.cfg @@ -7,7 +7,7 @@ jtag_device 4 0x1 0xf 0xe #target configuration -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 [new_target_name] configure -event reset-init { diff --git a/src/target/target/test_syntax_error.cfg b/src/target/target/test_syntax_error.cfg index 63713d1..8727aa3 100644 --- a/src/target/target/test_syntax_error.cfg +++ b/src/target/target/test_syntax_error.cfg @@ -1,4 +1,4 @@ # This script tests a syntax error in the startup # config script -syntax error here
\ No newline at end of file +syntax error here diff --git a/src/target/target/wi-9c.cfg b/src/target/target/wi-9c.cfg index 71acf0f..7277108 100644 --- a/src/target/target/wi-9c.cfg +++ b/src/target/target/wi-9c.cfg @@ -14,15 +14,9 @@ jtag_ntrst_delay 0 # Target configuration ###################### -#target <type> <endianess> <reset mode> <JTAG pos> <variant> -target arm926ejs big 0 arm926ejs - +target create target0 arm926ejs -endian big -chain-position 0 -variant arm926ejs [new_target_name] configure -event reset-init { script event/wi-9c_reset.script } - - -#working area <target#> <address> <size> <backup|nobackup> -working_area 0 0x00000000 0x1000 backup - +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00000000 -work-area-size 0x1000 -work-area-backup 1 ##################### # Flash configuration diff --git a/src/target/target/xba_revA3.cfg b/src/target/target/xba_revA3.cfg index 4c750b5..2fd44a9 100644 --- a/src/target/target/xba_revA3.cfg +++ b/src/target/target/xba_revA3.cfg @@ -9,12 +9,12 @@ jtag_ntrst_delay 100 #format L IRC IRCM IDCODE (Length, IR Capture, IR capture Mask, IDCODE) jtag_device 7 0x1 0x7f 0x7e -target xscale big 0 ixp42x +target create target0 xscale -endian big -chain-position 0 -variant ixp42x [new_target_name] configure -event reset-init { script event/xba_revA3.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 flash bank cfi 0x50000000 0x400000 2 2 0 -working_area 0 0x20010000 0x8060 nobackup init reset init diff --git a/src/target/target/zy1000.cfg b/src/target/target/zy1000.cfg index b47607f..2fb2db3 100644 --- a/src/target/target/zy1000.cfg +++ b/src/target/target/zy1000.cfg @@ -13,8 +13,7 @@ reset_config srst_only srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target configuration -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 # at CPU CLK <32kHz this must be disabled arm7_9 fast_memory_access enable @@ -45,7 +44,7 @@ flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf # required for usable performance. Used for lots of # other things than flash programming. -working_area 0 0x00020000 0x20000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0 jtag_khz 16000 @@ -89,4 +88,4 @@ proc production_test {} { sleep 25000 target_request debugmsgs disable return "See IP address above..." -}
\ No newline at end of file +} diff --git a/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg b/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg index 1f101a8..95f7918 100644 --- a/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg +++ b/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg @@ -24,16 +24,15 @@ reset_config srst_only srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false target_script 0 reset .\prj\at91r40008_reset.script -working_area 0 0x3C000 0x4000 nobackup flash bank cfi 0x10000000 0x400000 2 2 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt diff --git a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg index c24a251..8d9492b 100644 --- a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg +++ b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg @@ -22,16 +22,14 @@ reset_config trst_and_srst srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi-s_r4 - -working_area 0 0x40000000 0x4000 nobackup +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt diff --git a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg index d2dfd45..526cce1 100644 --- a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg +++ b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg @@ -22,13 +22,8 @@ reset_config trst_and_srst srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi-s_r4 - -working_area 0 0x40000000 0x4000 nobackup +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false #flash configuration #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> @@ -36,3 +31,6 @@ flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg index 634b502..e08b84b 100644 --- a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg +++ b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg @@ -25,18 +25,16 @@ reset_config srst_only srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false target_script 0 reset .\prj\sam7s256_reset.script -working_area 0 0x00200000 0x4000 nobackup - #flash bank <driver> <base> <size> <chip_width> <bus_width> flash bank at91sam7 0 0 0 0 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt diff --git a/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg b/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg index 978512d..425505f 100644 --- a/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg +++ b/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg @@ -25,18 +25,16 @@ reset_config srst_only srst_pulls_trst jtag_device 4 0x1 0xf 0xe
#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
target_script 0 reset .\prj\sam7x256_reset.script
-working_area 0 0x00200000 0x4000 nobackup
-
#flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank at91sam7 0 0 0 0 0
# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg b/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg index 79ce94b..2bef163 100644 --- a/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg +++ b/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg @@ -22,16 +22,14 @@ reset_config trst_and_srst srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi - -working_area 0 0x2000C000 0x4000 nobackup +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false #flash bank str7x <base> <size> 0 0 <target#> <variant> flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt diff --git a/testing/examples/STR710Test/prj/str710_jtagkey.cfg b/testing/examples/STR710Test/prj/str710_jtagkey.cfg index ed98ca1..da4c243 100644 --- a/testing/examples/STR710Test/prj/str710_jtagkey.cfg +++ b/testing/examples/STR710Test/prj/str710_jtagkey.cfg @@ -22,18 +22,16 @@ reset_config trst_and_srst srst_pulls_trst jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false target_script 0 gdb_program_config .\prj\str710_program.script -working_area 0 0x2000C000 0x4000 nobackup - #flash bank str7x <base> <size> 0 0 <target#> <variant> flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt diff --git a/testing/examples/STR912Test/prj/str912_jtagkey.cfg b/testing/examples/STR912Test/prj/str912_jtagkey.cfg index 5748803..487ec04 100644 --- a/testing/examples/STR912Test/prj/str912_jtagkey.cfg +++ b/testing/examples/STR912Test/prj/str912_jtagkey.cfg @@ -27,18 +27,16 @@ jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e #target configuration -daemon_startup reset - -#target <type> <startup mode> -#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> -target arm966e little 1 arm966e +target create target0 arm966e -endian little -chain-position 1 -variant arm966e +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false target_script 0 gdb_program_config .\prj\str912_program.script -working_area 0 0x50000000 16384 nobackup - #flash bank str7x <base> <size> 0 0 <target#> <variant> flash bank str9x 0x00000000 0x00080000 0 0 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt |