Update URLs and names in amdm37x.cfg, no functional changes.

* openocd.berlios.de -> openocd.sourceforge.net
* Update link to AM/DM37x Technical Reference Manual (ver R)
* "ICEpick" is properly spelled "ICEPick" according to TI

Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1856
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

1 files changed, 16 insertions, 16 deletions

diff --git a/tcl/target/amdm37x.cfg b/tcl/target/amdm37x.cfg
index ab2ccab..6004070 100644
--- a/tcl/target/amdm37x.cfg
+++ b/tcl/target/amdm37x.cfg
@@ -4,8 +4,8 @@
 # Copyright (C)   2009        by David Brownell
 # Copyright (C)   2009        by Magnus Lundin
 #
-# TI AM/DM37x
-#  http://www.ti.com/litv/pdf/sprugn4b
+# TI AM/DM37x Technical Reference Manual (Version R)
+#  http://www.ti.com/lit/ug/sprugn4r/sprugn4r.pdf
 #
 # This script is based on the AM3517 initialization.  It should be considered
 # preliminary since it needs more complete testing and only the basic
@@ -28,11 +28,11 @@ if { [info exists CHIPTYPE] } {
 
    switch $CHIPTYPE {
       dm37x {
-         # Primary TAP: ICEpick-C (JTAG route controller) and boundary scan
+         # Primary TAP: ICEPick-C (JTAG route controller) and boundary scan
          set _JRC_TAPID "-expected-id 0x2b89102f -expected-id 0x1b89102f -expected-id 0x0b89102f"
       }
       am35x {
-         # Primary TAP: ICEpick-C (JTAG route controller) and boundary scan
+         # Primary TAP: ICEPick-C (JTAG route controller) and boundary scan
          set _JRC_TAPID "-expected-id 0x0b7ae02f"
       }
       default {
@@ -50,20 +50,20 @@ adapter_khz 10
 ###############################################################################
 # JTAG setup
 # The OpenOCD commands are described in the TAP Declaration section
-#  http://openocd.berlios.de/doc/html/TAP-Declaration.html
+#  http://openocd.sourceforge.net/doc/html/TAP-Declaration.html
 ###############################################################################
 
-# The AM/DM37x has an ICEpick module in it like many of TI's other devices. More
-#  can be read about this module in sprugn4b under chapter 27:  "Debug and
+# The AM/DM37x has an ICEPick module in it like many of TI's other devices. More
+#  can be read about this module in sprugn4r in chapter 27:  "Debug and
 #  Emulation".  The module is used to route the JTAG chain to the various
 #  subsystems in the chip.
 source [find target/icepick.cfg]
 
 # The TAP order should be described from the TDO connection in OpenOCD to the
 #  TDI pin.  The OpenOCD FAQ describes this in more detail:
-#  http://openocd.berlios.de/doc/html/FAQ.html
+#  http://openocd.sourceforge.net/doc/html/FAQ.html
 
-# From SPRUGN4B CH27 the available secondary TAPs are in this order from TDO:
+# From SPRUGN4R CH27 the available secondary TAPs are in this order from TDO:
 #
 #  Device   |  TAP number
 #  ---------|------------
@@ -77,9 +77,9 @@ source [find target/icepick.cfg]
 
 ######
 # Start of Chain Description
-# The Secondary TAPs all have enable functions defined for use with the ICEpick
+# The Secondary TAPs all have enable functions defined for use with the ICEPick
 # Only the DAP is enabled.  The AM37xx does not have the Sequencer or DSP but
-# the TAP numbers for ICEpick do not change.
+# the TAP numbers for ICEPick do not change.
 #
 # TODO: A disable function should also be added.
 ######
@@ -93,26 +93,26 @@ jtag configure $_CHIPNAME.dap -event tap-enable \
 # These taps are only present in the DM37x series.
 if { $CHIPTYPE == "dm37x" } {
    # Secondary TAP: Sequencer (ARM968) it is not in the chain by default
-   # The ICEpick can be used to enable it in the chain.
+   # The ICEPick can be used to enable it in the chain.
    jtag newtap $_CHIPNAME arm2 -irlen 4 -ircapture 0x1 -irmask 0x0f -disable
    jtag configure $_CHIPNAME.arm2 -event tap-enable \
       "icepick_c_tapenable $_CHIPNAME.jrc 2"
 
    # Secondary TAP: C64x+ DSP - it is not in the chain by default (-disable)
-   # The ICEpick can be used to enable it in the chain.
+   # The ICEPick can be used to enable it in the chain.
    jtag newtap $_CHIPNAME dsp -irlen 38 -ircapture 0x25 -irmask 0x3f -disable
    jtag configure $_CHIPNAME.dsp -event tap-enable \
       "icepick_c_tapenable $_CHIPNAME.jrc 1"
 }
 
 # Secondary TAP: D2D it is not in the chain by default (-disable)
-# The ICEpick can be used to enable it in the chain.
+# The ICEPick can be used to enable it in the chain.
 # This IRLEN is probably incorrect - not sure where the documentation is.
 jtag newtap $_CHIPNAME d2d -irlen 4 -ircapture 0x1 -irmask 0x0f -disable
 jtag configure $_CHIPNAME.d2d -event tap-enable \
    "icepick_c_tapenable $_CHIPNAME.jrc 0"
 
-# Primary TAP: ICEpick - it is closest to TDI so last in the chain
+# Primary TAP: ICEPick - it is closest to TDI so last in the chain
 eval "jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f $_JRC_TAPID"
 
 ######
@@ -136,7 +136,7 @@ jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
 ###############################################################################
 # Target Setup:
 # This section is described in the OpenOCD documentation under CPU Configuration
-#  http://openocd.berlios.de/doc/html/CPU-Configuration.html
+#  http://openocd.sourceforge.net/doc/html/CPU-Configuration.html
 ###############################################################################
 
 # Create the CPU target to be used with GDB:  Cortex-A8, using DAP