diff options
author | Paul Fertser <fercerpav@gmail.com> | 2013-09-28 14:23:15 +0400 |
---|---|---|
committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2014-08-11 21:25:56 +0000 |
commit | c7384117c66e8f18896ca09ab8095d6da16bb1e5 (patch) | |
tree | 2513a1c61d2d8c6d92171a238281189ca3962f4a /tcl/target/efm32_stlink.cfg | |
parent | f701c0cbeb346df4cda378d3b4d5136aabba3b37 (diff) | |
download | riscv-openocd-c7384117c66e8f18896ca09ab8095d6da16bb1e5.zip riscv-openocd-c7384117c66e8f18896ca09ab8095d6da16bb1e5.tar.gz riscv-openocd-c7384117c66e8f18896ca09ab8095d6da16bb1e5.tar.bz2 |
Allow transports to override the selected target (hla configs unification)
This should allow to share common configs for both regular access and
high-level adapters.
Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.
Runtime-tested with a TI tm4c123g board.
Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Diffstat (limited to 'tcl/target/efm32_stlink.cfg')
-rw-r--r-- | tcl/target/efm32_stlink.cfg | 44 |
1 files changed, 2 insertions, 42 deletions
diff --git a/tcl/target/efm32_stlink.cfg b/tcl/target/efm32_stlink.cfg index 45ed9fc..230155e 100644 --- a/tcl/target/efm32_stlink.cfg +++ b/tcl/target/efm32_stlink.cfg @@ -1,42 +1,2 @@ -# -# efm32 stlink pseudo target -# - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME efm32 -} - -# Work-area is a space in RAM used for flash programming -# By default use 2kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x800 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x2ba01477 -} - -# EFM32 MCUs only support SWD interface -set _TRANSPORT hla_swd - -transport select $_TRANSPORT - -hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME hla_target -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME - -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m reset_config sysresetreq +echo "WARNING: target/efm32_stlink.cfg is deprecated, please switch to target/efm32.cfg" +source [find target/efm32.cfg] |