From c7384117c66e8f18896ca09ab8095d6da16bb1e5 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Sat, 28 Sep 2013 14:23:15 +0400 Subject: Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov Tested-by: Andrey Skvortsov Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson --- tcl/target/efm32_stlink.cfg | 44 ++------------------------------------------ 1 file changed, 2 insertions(+), 42 deletions(-) (limited to 'tcl/target/efm32_stlink.cfg') diff --git a/tcl/target/efm32_stlink.cfg b/tcl/target/efm32_stlink.cfg index 45ed9fc..230155e 100644 --- a/tcl/target/efm32_stlink.cfg +++ b/tcl/target/efm32_stlink.cfg @@ -1,42 +1,2 @@ -# -# efm32 stlink pseudo target -# - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME efm32 -} - -# Work-area is a space in RAM used for flash programming -# By default use 2kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x800 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x2ba01477 -} - -# EFM32 MCUs only support SWD interface -set _TRANSPORT hla_swd - -transport select $_TRANSPORT - -hla newtap $_CHIPNAME cpu -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME hla_target -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME - -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m reset_config sysresetreq +echo "WARNING: target/efm32_stlink.cfg is deprecated, please switch to target/efm32.cfg" +source [find target/efm32.cfg] -- cgit v1.1